ref: 8bebe3ab193201f2bd9c32328e229bf36fd2ad82
parent: 2d105c2d327a7609f79d6dc75d8e8d5b4868adc2
author: cinap_lenrek <[email protected]>
date: Fri Dec 31 10:56:40 EST 2021
remove ssl(3)
--- a/sys/man/3/ssl
+++ /dev/null
@@ -1,124 +1,0 @@
-.TH SSL 3
-.SH NAME
-ssl \- SSL record layer
-.SH SYNOPSIS
-.nf
-.B bind -a #D /net
-
-.B /net/ssl/clone
-.BI /net/ssl/ n
-.BI /net/ssl/ n /ctl
-.BI /net/ssl/ n /data
-.BI /net/ssl/ n /encalgs
-.BI /net/ssl/ n /hashalgs
-.BI /net/ssl/ n /secretin
-.BI /net/ssl/ n /secretout
-.fi
-.SH DESCRIPTION
-The SSL device provides the interface to the Secure Socket Layer
-device implementing the record layer protocol of SSLv2
-(but not the handshake protocol, which is responsible for
-mutual authentication and key exchange.)
-The
-.I ssl
-device can be thought of as a filter providing optional encryption
-and anti-tampering.
-.PP
-The top level directory contains a
-.B clone
-file and subdirectories numbered from zero to the number of connections
-configured.
-Opening the
-.B clone
-file reserves a connection. The file descriptor returned from the
-.IR open (2)
-will point to the control file,
-.BR ctl ,
-of the newly allocated connection. Reading the
-.B ctl
-file returns a text
-string representing the number of the
-connection.
-.PP
-A connection is controlled by writing text strings to the associated
-.B ctl
-file. After a connection has been established data may be read from
-and written to the data file.
-.PP
-The SSL protocol provides a stream connection that preserves
-.BR read / write
-boundaries. As long as reads always specify buffers that are
-of equal or greater lengths than the writes at the other end of the
-connection, one write will correspond to one read.
-.PP
-Options are set by writing control messages to the
-.B ctl
-file of the connection.
-.PP
-The following control messages are supported:
-.TP
-.BI fd \ open-file-descriptor
-Run the SSL protocol over the existing file descriptor.
-.TP
-.BI alg \ cryptoalgs
-Connections start in
-.B alg clear
-which means no encryption or digesting.
-Writing
-.B alg sha
-to the control file turns on SHA-1 digest authentication
-for the data channel.
-Similarly, writing
-.B alg rc4_128
-enables encryption.
-Both can be turned on at once by
-.BR "alg sha rc4_128" .
-The digest mode
-.B sha
-may be replaced by
-.BR md5 .
-The encryption mode
-.B rc4_128
-may be replaced by
-.BR rc4_40 ,
-.BR rc4_128 ,
-.BR rc4_256 ,
-.BR des_40_ecb ,
-.BR des_40_cbc ,
-.BR des_56_ecb ,
-and
-.BR des_56_cbc .
-The mode may be changed at any time during the connection.
-.TP
-.BI secretin \ base64-secret
-The secret for decrypting and authenticating incoming messages
-can be specified either as a base64 encoded string by writing to the
-control file, or as a binary byte string using the interface below.
-.TP
-.BI secretout \ base64-secret
-The secret for encrypting and hashing outgoing messages
-can be specified either as a base64 encoded string by writing to the
-control file, or as a binary byte string using the interface below.
-.PP
-Before enabling digesting or encryption, shared secrets must be agreed upon with
-the remote side, one for each direction of transmission,
-and loaded as shown above or by writing to the files
-.I secretin
-and
-.IR secretout .
-If either the incoming or outgoing secret is not specified, the other secret
-is assumed to work for both directions.
-.PP
-The encryption and hash algoritms actually included in the kernel
-may be smaller than the set presented here. Reading
-.I encalgs
-and
-.I hashalgs
-will give the actual space-separated list of algorithms implemented.
-.SH "SEE ALSO"
-.IR listen (8),
-.IR dial (2)
-.SH SOURCE
-.B /sys/src/9/port/devssl.c
-.SH BUGS
-Messages longer than 4096 bytes are truncated.