ref: dc2b5f18e51c46f7f0cc9b8344719db26331f34b
parent: f508dfaab17c0ec9519078db82c9d5b5f1ba76a5
author: Sigrid Solveig Haflínudóttir <[email protected]>
date: Thu Aug 18 09:45:36 EDT 2022
aux/wm8960: do the math
--- a/sys/src/cmd/aux/wm8960.c
+++ b/sys/src/cmd/aux/wm8960.c
@@ -109,21 +109,44 @@
Out *o;
int i;
+ /*
+ * getting DAC ready for s16c2r44100:
+ *
+ * mclk₀ = 25Mhz (set in sai)
+ * pllprescale = /2 → *actual* mclk₁ is 25/2 = 12.5Mhz
+ * sysclk = 44.1kHz*256 = 11.2896Mhz
+ * → dacdiv = /(1*256) = sysclk/(1*256) = 44.1kHz
+ * f₂ = 4*2*sysclk = 90.3168Mhz
+ *
+ * PLL freq ration:
+ * R = f₂/mclk₁
+ * N = int(R) = 7
+ * K = 2²⁴*(R-N) = 3780644.9623
+ *
+ * dacdiv = /(1*256) → DAC at max rate
+ * → pick bclk rate 1.4112Mhz (sysclk/8)
+ * → bclkdiv = /8
+ *
+ * class D clk needs to be ~768kHz (700-800)
+ * → sysclk/768000 = 14
+ * → dclkdiv = /16 → dclk = 705.6kHz
+ */
+
wr(0x0f, 0); /* reset registers to default */
wr(0x04,
- 1<<0 | /* sysclk derived from pll */
- 2<<1 | /* sysclk div by 2 */
- 1<<3 | /* dacdiv = sysclk/(1.5*256) */
+ 0<<3 | /* dacdiv → sysclk/(1*256) = 44100 */
+ 2<<1 | /* sysclkdiv → /2 */
+ 1<<0 | /* clksel → pll output */
0
);
wr(0x34,
- 1<<5 | /* enable fractional mode */
- 1<<4 | /* pllprescale (divide mclk by 2 before) */
- 10<<0 | /* plln = int(f1/f2) */
+ 1<<5 | /* enable fractional mode */
+ 1<<4 | /* pllprescale */
+ 7<<0 | /* N */
0
);
- k = 0xda0000; /* fractional part */
- wr(0x35, (k>>16) & 0xff);
+ k = 3780645; /* K */
+ wr(0x35, (k>>16) & 0x3f);
wr(0x36, (k>>8) & 0xff);
wr(0x37, k & 0xff);
@@ -130,7 +153,7 @@
wr(0x05, 0<<3); /* unmute DAC */
wr(0x06, 1<<3 | 1<<2); /* ramp up DAC volume slowly */
wr(0x07, 1<<6 | 2); /* master mode; i²s, 16-bit words, slave mode */
- wr(0x08, 5<<6 | 9<<0); /* class D divider: sysclk/8; bclk = sysclk/12 */
+ wr(0x08, 7<<6 | 7<<0); /* dclkdiv → sysclk/16; bclkdiv → sysclk/8 */
wr(0x17, 1<<8 | 1<<0); /* slow clock on; thermal shutdown on */
wr(0x18, 1<<6); /* HP switch on; high = HP */
wr(0x19, 1<<7 | 1<<6); /* Vmid = playback, VREF on */