shithub: libsamplerate

ref: c28af3dece9b149341ec8020259fc46b9a314740
dir: /tests/termination_test.c/

View raw version
/*
** Copyright (c) 2002-2016, Erik de Castro Lopo <[email protected]>
** All rights reserved.
**
** This code is released under 2-clause BSD license. Please see the
** file at : https://github.com/libsndfile/libsamplerate/blob/master/COPYING
*/

#include <stdio.h>
#include <stdlib.h>
#include <math.h>

#include <samplerate.h>

#include "util.h"

#define	SHORT_BUFFER_LEN	2048
#define	LONG_BUFFER_LEN		((1 << 16) - 20)

static void simple_test (int converter) ;
static void stream_test (int converter, double ratio) ;
static void init_term_test (int converter, double ratio) ;

static int	next_block_length (int reset) ;

int
main (void)
{	static double src_ratios [] =
	{	0.999900, 1.000100, 0.789012, 1.200000, 0.333333, 3.100000,
		0.125000, 8.000000, 0.099900, 9.990000, 0.100000, 10.00000
	} ;

	int k ;

	puts ("\n    Zero Order Hold interpolator:") ;

	for (k = 0 ; k < ARRAY_LEN (src_ratios) ; k++)
		init_term_test (SRC_ZERO_ORDER_HOLD, src_ratios [k]) ;
	puts ("") ;
	for (k = 0 ; k < ARRAY_LEN (src_ratios) ; k++)
		stream_test (SRC_ZERO_ORDER_HOLD, src_ratios [k]) ;


	puts ("\n    Linear interpolator:") ;
	for (k = 0 ; k < ARRAY_LEN (src_ratios) ; k++)
		init_term_test (SRC_LINEAR, src_ratios [k]) ;
	puts ("") ;
	for (k = 0 ; k < ARRAY_LEN (src_ratios) ; k++)
		stream_test (SRC_LINEAR, src_ratios [k]) ;


	puts ("\n    Sinc interpolator:") ;
	for (k = 0 ; k < ARRAY_LEN (src_ratios) ; k++)
		init_term_test (SRC_SINC_FASTEST, src_ratios [k]) ;
	puts ("") ;
	for (k = 0 ; k < ARRAY_LEN (src_ratios) ; k++)
		stream_test (SRC_SINC_FASTEST, src_ratios [k]) ;

	puts ("") ;

	simple_test (SRC_SINC_FASTEST) ;

	return 0 ;
} /* main */

static void
simple_test (int converter)
{
	// MSVC doesn't support variable-length arrays
	#define ilen 199030
	#define olen 1000
	int error ;

	{
		float in [ilen] ;
		float out [olen] ;
		double ratio = (1.0 * olen) / ilen ;
		SRC_DATA src_data =
		{	in, out,
			ilen, olen,
			0, 0, 0,
			ratio
		} ;

		error = src_simple (&src_data, converter, 1) ;
		if (error)
		{	printf ("\n\nLine %d : %s\n\n", __LINE__, src_strerror (error)) ;
			exit (1) ;
			} ;
	} ;

    return ;
} /* simple_test */

static void
init_term_test (int converter, double src_ratio)
{	static float input [SHORT_BUFFER_LEN], output [SHORT_BUFFER_LEN] ;

	SRC_DATA	src_data ;

	int k, input_len, output_len, error, terminate ;

	printf ("\tinit_term_test   (SRC ratio = %7.4f) .......... ", src_ratio) ;
	fflush (stdout) ;

	/* Calculate maximun input and output lengths. */
	if (src_ratio >= 1.0)
	{	output_len = SHORT_BUFFER_LEN ;
		input_len = (int) floor (SHORT_BUFFER_LEN / src_ratio) ;
		}
	else
	{	input_len = SHORT_BUFFER_LEN ;
		output_len = (int) floor (SHORT_BUFFER_LEN * src_ratio) ;
		} ;

	/* Reduce input_len by 10 so output is longer than necessary. */
	input_len -= 10 ;

	for (k = 0 ; k < ARRAY_LEN (input) ; k++)
		input [k] = 1.0 ;

	if (output_len > SHORT_BUFFER_LEN)
	{	printf ("\n\nLine %d : output_len > SHORT_BUFFER_LEN\n\n", __LINE__) ;
		exit (1) ;
		} ;

	src_data.data_in = input ;
	src_data.input_frames = input_len ;

	src_data.src_ratio = src_ratio ;

	src_data.data_out = output ;
	src_data.output_frames = SHORT_BUFFER_LEN ;

	if ((error = src_simple (&src_data, converter, 1)))
	{	printf ("\n\nLine %d : %s\n\n", __LINE__, src_strerror (error)) ;
		exit (1) ;
		} ;

	terminate = (int) ceil ((src_ratio >= 1.0) ? 1 : 1.0 / src_ratio) ;

	if (fabs (src_ratio * input_len - src_data.output_frames_gen) > terminate)
	{	printf ("\n\nLine %d : Bad output frame count.\n\n", __LINE__) ;
		printf ("\tterminate             : %d\n", terminate) ;
		printf ("\tsrc_ratio             : %.4f\n", src_ratio) ;
		printf ("\tinput_len             : %d\n"
				"\tinput_len * src_ratio : %f\n", input_len, input_len * src_ratio) ;
		printf ("\toutput_frames_gen     : %ld\n\n", src_data.output_frames_gen) ;
		exit (1) ;
		} ;

	if (labs (src_data.input_frames_used - input_len) > 1)
	{	printf ("\n\nLine %d : input_frames_used should be %d, is %ld.\n\n",
					 __LINE__, input_len, src_data.input_frames_used) ;
		printf ("\tsrc_ratio  : %.4f\n", src_ratio) ;
		printf ("\tinput_len  : %d\n\tinput_used : %ld\n\n", input_len, src_data.input_frames_used) ;
		exit (1) ;
		} ;

	if (fabs (output [0]) < 0.1)
	{	printf ("\n\nLine %d : First output sample is bad.\n\n", __LINE__) ;
		printf ("\toutput [0] == %f\n\n", output [0]) ;
		exit (1) ;
		}

	puts ("ok") ;

	return ;
} /* init_term_test */

static void
stream_test (int converter, double src_ratio)
{	static float input [LONG_BUFFER_LEN], output [LONG_BUFFER_LEN] ;

	SRC_STATE	*src_state ;
	SRC_DATA	src_data ;

	int input_len, output_len, current_in, current_out ;
	int k, error, terminate ;

	printf ("\tstream_test      (SRC ratio = %7.4f) .......... ", src_ratio) ;
	fflush (stdout) ;

/* Erik */
for (k = 0 ; k < LONG_BUFFER_LEN ; k++) input [k] = k * 1.0f ;

	/* Calculate maximun input and output lengths. */
	if (src_ratio >= 1.0)
	{	output_len = LONG_BUFFER_LEN ;
		input_len = (int) floor (LONG_BUFFER_LEN / src_ratio) ;
		}
	else
	{	input_len = LONG_BUFFER_LEN ;
		output_len = (int) floor (LONG_BUFFER_LEN * src_ratio) ;
		} ;

	/* Reduce input_len by 10 so output is longer than necessary. */
	input_len -= 20 ;

	if (output_len > LONG_BUFFER_LEN)
	{	printf ("\n\nLine %d : output_len > LONG_BUFFER_LEN\n\n", __LINE__) ;
		exit (1) ;
		} ;

	current_in = current_out = 0 ;

	/* Perform sample rate conversion. */
	if ((src_state = src_new (converter, 1, &error)) == NULL)
	{	printf ("\n\nLine %d : src_new() failed : %s\n\n", __LINE__, src_strerror (error)) ;
		exit (1) ;
		} ;

	src_data.end_of_input = 0 ; /* Set this later. */

	src_data.data_in = input ;

	src_data.src_ratio = src_ratio ;

	src_data.data_out = output ;
	src_data.output_frames = ARRAY_LEN (output) / 10 ;

	terminate = 1 + (int) ceil ((src_ratio >= 1.0) ? src_ratio : 1.0 / src_ratio) ;

	while (1)
	{
		src_data.input_frames = next_block_length (0) ;
		src_data.input_frames = MIN (src_data.input_frames, input_len - current_in) ;

		src_data.output_frames = ARRAY_LEN (output) - current_out ;
		/*-Erik MIN (src_data.output_frames, output_len - current_out) ;-*/

		src_data.end_of_input = (current_in >= input_len) ? 1 : 0 ;

		if ((error = src_process (src_state, &src_data)))
		{	printf ("\n\nLine %d : %s\n\n", __LINE__, src_strerror (error)) ;
			printf ("  src_data.input_frames  : %ld\n", src_data.input_frames) ;
			printf ("  src_data.output_frames : %ld\n\n", src_data.output_frames) ;
			exit (1) ;
			} ;

		if (src_data.end_of_input && src_data.output_frames_gen == 0)
			break ;

		if (src_data.input_frames_used > src_data.input_frames)
		{	printf ("\n\nLine %d : input_frames_used > input_frames\n\n", __LINE__) ;
			printf ("  src_data.input_frames      : %ld\n", src_data.input_frames) ;
			printf ("  src_data.input_frames_used : %ld\n", src_data.input_frames_used) ;
			printf ("  src_data.output_frames     : %ld\n", src_data.output_frames) ;
			printf ("  src_data.output_frames_gen : %ld\n\n", src_data.output_frames_gen) ;
			exit (1) ;
			} ;

		if (src_data.input_frames_used < 0)
		{	printf ("\n\nLine %d : input_frames_used (%ld) < 0\n\n", __LINE__, src_data.input_frames_used) ;
			exit (1) ;
			} ;

		if (src_data.output_frames_gen < 0)
		{	printf ("\n\nLine %d : output_frames_gen (%ld) < 0\n\n", __LINE__, src_data.output_frames_gen) ;
			exit (1) ;
			} ;

		current_in	+= src_data.input_frames_used ;
		current_out += src_data.output_frames_gen ;

		if (current_in > input_len + terminate)
		{	printf ("\n\nLine %d : current_in (%d) > input_len (%d + %d)\n\n", __LINE__, current_in, input_len, terminate) ;
			exit (1) ;
			} ;

		if (current_out > output_len)
		{	printf ("\n\nLine %d : current_out (%d) > output_len (%d)\n\n", __LINE__, current_out, output_len) ;
			exit (1) ;
			} ;

		if (src_data.input_frames_used > input_len)
		{	printf ("\n\nLine %d : input_frames_used (%ld) > %d\n\n", __LINE__, src_data.input_frames_used, input_len) ;
			exit (1) ;
			} ;

		if (src_data.output_frames_gen > output_len)
		{	printf ("\n\nLine %d : output_frames_gen (%ld) > %d\n\n", __LINE__, src_data.output_frames_gen, output_len) ;
			exit (1) ;
			} ;

		if (src_data.data_in == NULL && src_data.output_frames_gen == 0)
			break ;


		src_data.data_in	+= src_data.input_frames_used ;
		src_data.data_out	+= src_data.output_frames_gen ;
		} ;

	src_state = src_delete (src_state) ;

	if (fabs (current_out - src_ratio * input_len) > terminate)
	{	printf ("\n\nLine %d : bad output data length %d should be %2.1f +/- %d.\n", __LINE__,
					current_out, src_ratio * input_len, terminate) ;
		printf ("\tsrc_ratio  : %.4f\n", src_ratio) ;
		printf ("\tinput_len  : %d\n\tinput_used : %d\n", input_len, current_in) ;
		printf ("\toutput_len : %d\n\toutput_gen : %d\n\n", output_len, current_out) ;
		exit (1) ;
		} ;

	if (current_in != input_len)
	{	printf ("\n\nLine %d : unused input.\n", __LINE__) ;
		printf ("\tinput_len         : %d\n", input_len) ;
		printf ("\tinput_frames_used : %d\n\n", current_in) ;
		exit (1) ;
		} ;

	puts ("ok") ;

	return ;
} /* stream_test */

static int
next_block_length (int reset)
{	static int block_lengths [] = /* Should be an odd length. */
	{	/*-2, 500, 5, 400, 10, 300, 20, 200, 50, 100, 70 -*/
		5, 400, 10, 300, 20, 200, 50, 100, 70
		} ;
	static int block_len_index = 0 ;

	if (reset)
		block_len_index = 0 ;
	else
		block_len_index = (block_len_index + 1) % ARRAY_LEN (block_lengths) ;

	return block_lengths [block_len_index] ;
} /* next_block_length */