ref: 39fa0777e3445b04090f35ac396a33ad3a583351
parent: 2b08f89076d1e93339fbbcc10e3298a0eec66bd6
author: James Zern <[email protected]>
date: Tue May 29 12:38:46 EDT 2018
Revert 3 slide show coding changes This is a combination of the following 3 reverts. The changes cause issues on certain hardware devices. We'll pull them for now to allow for further investigation. Revert "Experiment regarding playback problems on Bravia TVs." This reverts commit 624f8105f5ae7e0bc82bdc7e10a4253295134a8b. Revert "Improved slide show coding" This reverts commit f4091bc30eef0fcacb5d5bd74ab7cfbc3c8aab5f. Revert "Improved coding on slide show content." This reverts commit 2fa333c2ae1b6fcc1864de12a7ad344a16e2ac0a. BUG=b/77492144 Change-Id: Ifba937792d644a9286307262f050216408e8ecf4
--- a/vp9/encoder/vp9_firstpass.c
+++ b/vp9/encoder/vp9_firstpass.c
@@ -2201,8 +2201,7 @@
// Define middle frame
mid_frame_idx = frame_index + (rc->baseline_gf_interval >> 1) - 1;
- normal_frames =
- rc->baseline_gf_interval - (key_frame || rc->source_alt_ref_pending);
+ normal_frames = (rc->baseline_gf_interval - rc->source_alt_ref_pending);
if (normal_frames > 1)
normal_frame_bits = (int)(total_group_bits / normal_frames);
else
@@ -2441,9 +2440,8 @@
loop_decay_rate = get_prediction_decay_rate(cpi, &next_frame);
// Monitor for static sections.
- if ((rc->frames_since_key + i - 1) > 1) {
- zero_motion_accumulator *= get_zero_motion_factor(cpi, &next_frame);
- }
+ zero_motion_accumulator = VPXMIN(
+ zero_motion_accumulator, get_zero_motion_factor(cpi, &next_frame));
// Break clause to detect very still sections after motion. For example,
// a static image after a fade or other transition.
@@ -2464,18 +2462,9 @@
}
// Break out conditions.
- // Break at maximum of active_max_gf_interval unless almost totally static.
- //
- // Note that the addition of a test of rc->source_alt_ref_active is
- // deliberate. The effect of this is that after a normal altref group even
- // if the material is static there will be one normal length GF group
- // before allowing longer GF groups. The reason for this is that in cases
- // such as slide shows where slides are separated by a complex transition
- // such as a fade, the arf group spanning the transition may not be coded
- // at a very high quality and hence this frame (with its overlay) is a
- // poor golden frame to use for an extended group.
- if (((i >= active_max_gf_interval) &&
- ((zero_motion_accumulator < 0.995) || (rc->source_alt_ref_active))) ||
+ if (
+ // Break at active_max_gf_interval unless almost totally static.
+ ((i >= active_max_gf_interval) && (zero_motion_accumulator < 0.995)) ||
(
// Don't break out with a very short interval.
(i >= active_min_gf_interval) &&
@@ -2495,8 +2484,8 @@
rc->constrained_gf_group = (i >= rc->frames_to_key) ? 1 : 0;
// Should we use the alternate reference frame.
- if ((zero_motion_accumulator < 0.995) && allow_alt_ref &&
- (i < cpi->oxcf.lag_in_frames) && (i >= rc->min_gf_interval)) {
+ if (allow_alt_ref && (i < cpi->oxcf.lag_in_frames) &&
+ (i >= rc->min_gf_interval)) {
const int forward_frames = (rc->frames_to_key - i >= i - 1)
? i - 1
: VPXMAX(0, rc->frames_to_key - i);
@@ -2523,11 +2512,8 @@
rc->gfu_boost = VPXMIN((int)rc->gfu_boost, i * 200);
#endif
- rc->baseline_gf_interval =
- ((twopass->kf_zeromotion_pct >= STATIC_KF_GROUP_THRESH) &&
- (i >= rc->frames_to_key))
- ? i
- : (i - (is_key_frame || rc->source_alt_ref_pending));
+ // Set the interval until the next gf.
+ rc->baseline_gf_interval = i - (is_key_frame || rc->source_alt_ref_pending);
rc->frames_till_gf_update_due = rc->baseline_gf_interval;
@@ -2774,7 +2760,6 @@
vp9_zero(next_frame);
cpi->common.frame_type = KEY_FRAME;
- rc->frames_since_key = 0;
// Reset the GF group data structures.
vp9_zero(*gf_group);
@@ -2919,22 +2904,13 @@
for (i = 0; i < (rc->frames_to_key - 1); ++i) {
if (EOF == input_stats(twopass, &next_frame)) break;
- // The zero motion test here insures that if we mark a kf group as static
- // it is static throughout not just the first KF_BOOST_SCAN_MAX_FRAMES.
- // It also allows for a larger boost on long static groups.
- if ((i <= KF_BOOST_SCAN_MAX_FRAMES) || (zero_motion_accumulator >= 0.99)) {
+ if (i <= KF_BOOST_SCAN_MAX_FRAMES) {
double frame_boost;
double zm_factor;
// Monitor for static sections.
- // First frame in kf group the second ref indicator is invalid.
- if (i > 0) {
- zero_motion_accumulator = VPXMIN(
- zero_motion_accumulator, get_zero_motion_factor(cpi, &next_frame));
- } else {
- zero_motion_accumulator =
- next_frame.pcnt_inter - next_frame.pcnt_motion;
- }
+ zero_motion_accumulator = VPXMIN(
+ zero_motion_accumulator, get_zero_motion_factor(cpi, &next_frame));
// Factor 0.75-1.25 based on how much of frame is static.
zm_factor = (0.75 + (zero_motion_accumulator / 2.0));
@@ -2971,16 +2947,10 @@
twopass->section_intra_rating = calculate_section_intra_ratio(
start_position, twopass->stats_in_end, rc->frames_to_key);
- // Special case for static / slide show content but dont apply
- // if the kf group is very short.
- if ((zero_motion_accumulator > 0.99) && (rc->frames_to_key > 8)) {
- rc->kf_boost = VPXMAX((rc->frames_to_key * 100), MAX_KF_TOT_BOOST);
- } else {
- // Apply various clamps for min and max boost
- rc->kf_boost = VPXMAX((int)boost_score, (rc->frames_to_key * 3));
- rc->kf_boost = VPXMAX(rc->kf_boost, MIN_KF_TOT_BOOST);
- rc->kf_boost = VPXMIN(rc->kf_boost, MAX_KF_TOT_BOOST);
- }
+ // Apply various clamps for min and max boost
+ rc->kf_boost = VPXMAX((int)boost_score, (rc->frames_to_key * 3));
+ rc->kf_boost = VPXMAX(rc->kf_boost, MIN_KF_TOT_BOOST);
+ rc->kf_boost = VPXMIN(rc->kf_boost, MAX_KF_TOT_BOOST);
// Work out how many bits to allocate for the key frame itself.
kf_bits = calculate_boost_bits((rc->frames_to_key - 1), rc->kf_boost,
--- a/vp9/encoder/vp9_firstpass.h
+++ b/vp9/encoder/vp9_firstpass.h
@@ -120,12 +120,12 @@
typedef struct {
unsigned char index;
unsigned char first_inter_index;
- RATE_FACTOR_LEVEL rf_level[MAX_STATIC_GF_GROUP_LENGTH + 1];
- FRAME_UPDATE_TYPE update_type[MAX_STATIC_GF_GROUP_LENGTH + 1];
- unsigned char arf_src_offset[MAX_STATIC_GF_GROUP_LENGTH + 1];
- unsigned char arf_update_idx[MAX_STATIC_GF_GROUP_LENGTH + 1];
- unsigned char arf_ref_idx[MAX_STATIC_GF_GROUP_LENGTH + 1];
- int bit_allocation[MAX_STATIC_GF_GROUP_LENGTH + 1];
+ RATE_FACTOR_LEVEL rf_level[(MAX_LAG_BUFFERS * 2) + 1];
+ FRAME_UPDATE_TYPE update_type[(MAX_LAG_BUFFERS * 2) + 1];
+ unsigned char arf_src_offset[(MAX_LAG_BUFFERS * 2) + 1];
+ unsigned char arf_update_idx[(MAX_LAG_BUFFERS * 2) + 1];
+ unsigned char arf_ref_idx[(MAX_LAG_BUFFERS * 2) + 1];
+ int bit_allocation[(MAX_LAG_BUFFERS * 2) + 1];
} GF_GROUP;
typedef struct {
--- a/vp9/encoder/vp9_ratectrl.c
+++ b/vp9/encoder/vp9_ratectrl.c
@@ -1222,9 +1222,6 @@
// Baseline value derived from cpi->active_worst_quality and kf boost.
active_best_quality =
get_kf_active_quality(rc, active_worst_quality, cm->bit_depth);
- if (cpi->twopass.kf_zeromotion_pct >= STATIC_KF_GROUP_THRESH) {
- active_best_quality /= 4;
- }
// Allow somewhat lower kf minq with small image formats.
if ((cm->width * cm->height) <= (352 * 288)) {
@@ -1971,8 +1968,13 @@
rc->max_gf_interval = vp9_rc_get_default_max_gf_interval(
cpi->framerate, rc->min_gf_interval);
- // Extended max interval for genuinely static scenes like slide shows.
- rc->static_scene_max_gf_interval = MAX_STATIC_GF_GROUP_LENGTH;
+ // Extended interval for genuinely static scenes
+ rc->static_scene_max_gf_interval = MAX_LAG_BUFFERS * 2;
+
+ if (is_altref_enabled(cpi)) {
+ if (rc->static_scene_max_gf_interval > oxcf->lag_in_frames - 1)
+ rc->static_scene_max_gf_interval = oxcf->lag_in_frames - 1;
+ }
if (rc->max_gf_interval > rc->static_scene_max_gf_interval)
rc->max_gf_interval = rc->static_scene_max_gf_interval;
--- a/vp9/encoder/vp9_ratectrl.h
+++ b/vp9/encoder/vp9_ratectrl.h
@@ -34,14 +34,6 @@
#define FRAME_OVERHEAD_BITS 200
-// Threshold used to define a KF group as static (e.g. a slide show).
-// Essentially this means that no frame in the group has more than 1% of MBs
-// that are not marked as coded with 0,0 motion in the first pass.
-#define STATIC_KF_GROUP_THRESH 99
-
-// The maximum duration of a GF group that is static (for example a slide show).
-#define MAX_STATIC_GF_GROUP_LENGTH 25
-
typedef enum {
INTER_NORMAL = 0,
INTER_HIGH = 1,