ref: 49785d3d0298ffc77915315bf1d37b26936128d1
parent: 87386826a95fda953162050a27f2506d8c1f3db5
author: Marco Paniconi <[email protected]>
date: Wed Jun 6 08:14:59 EDT 2018
vp9-svc: Add a buffer_idx is_used parameter for SVC. For the case where a second (long term) temoral reference is used in the SVC: this additional parameter is to make sure the buffer slot selected for this reference is available for usage, i.e., it is never used for any of the 3 references set for the fixed SVC patterns. And some code cleanup (replace cpi->svc). No change in behavior. Change-Id: Icba46edfbbefb94d5ea8e2d5c24cccd85a406ee6
--- a/vp9/encoder/vp9_ratectrl.c
+++ b/vp9/encoder/vp9_ratectrl.c
@@ -1837,24 +1837,23 @@
void vp9_rc_get_svc_params(VP9_COMP *cpi) {VP9_COMMON *const cm = &cpi->common;
RATE_CONTROL *const rc = &cpi->rc;
+ SVC *const svc = &cpi->svc;
int target = rc->avg_frame_bandwidth;
- int layer =
- LAYER_IDS_TO_IDX(cpi->svc.spatial_layer_id, cpi->svc.temporal_layer_id,
- cpi->svc.number_temporal_layers);
+ int layer = LAYER_IDS_TO_IDX(svc->spatial_layer_id, svc->temporal_layer_id,
+ svc->number_temporal_layers);
// Periodic key frames is based on the super-frame counter
// (svc.current_superframe), also only base spatial layer is key frame.
if ((cm->current_video_frame == 0) || (cpi->frame_flags & FRAMEFLAGS_KEY) ||
(cpi->oxcf.auto_key &&
- (cpi->svc.current_superframe % cpi->oxcf.key_freq == 0) &&
- cpi->svc.spatial_layer_id == 0)) {+ (svc->current_superframe % cpi->oxcf.key_freq == 0) &&
+ svc->spatial_layer_id == 0)) {cm->frame_type = KEY_FRAME;
rc->source_alt_ref_active = 0;
if (is_one_pass_cbr_svc(cpi)) {if (cm->current_video_frame > 0) vp9_svc_reset_key_frame(cpi);
- layer = LAYER_IDS_TO_IDX(cpi->svc.spatial_layer_id,
- cpi->svc.temporal_layer_id,
- cpi->svc.number_temporal_layers);
- cpi->svc.layer_context[layer].is_key_frame = 1;
+ layer = LAYER_IDS_TO_IDX(svc->spatial_layer_id, svc->temporal_layer_id,
+ svc->number_temporal_layers);
+ svc->layer_context[layer].is_key_frame = 1;
cpi->ref_frame_flags &= (~VP9_LAST_FLAG & ~VP9_GOLD_FLAG & ~VP9_ALT_FLAG);
// Assumption here is that LAST_FRAME is being updated for a keyframe.
// Thus no change in update flags.
@@ -1863,12 +1862,12 @@
} else {cm->frame_type = INTER_FRAME;
if (is_one_pass_cbr_svc(cpi)) {- LAYER_CONTEXT *lc = &cpi->svc.layer_context[layer];
- if (cpi->svc.spatial_layer_id == cpi->svc.first_spatial_layer_to_encode) {+ LAYER_CONTEXT *lc = &svc->layer_context[layer];
+ if (svc->spatial_layer_id == svc->first_spatial_layer_to_encode) {lc->is_key_frame = 0;
} else {lc->is_key_frame =
- cpi->svc.layer_context[cpi->svc.temporal_layer_id].is_key_frame;
+ svc->layer_context[svc->temporal_layer_id].is_key_frame;
}
target = calc_pframe_target_size_one_pass_cbr(cpi);
}
@@ -1876,13 +1875,12 @@
// If long term termporal feature is enabled, set the period of the update.
// The update/refresh of this reference frame is always on base temporal
// layer frame.
- if (cpi->svc.use_longterm_ref_current_layer &&
- cpi->svc.temporal_layer_id == 0) {- if (cpi->svc.layer_context[cpi->svc.temporal_layer_id].is_key_frame) {+ if (svc->use_longterm_ref_current_layer && svc->temporal_layer_id == 0) {+ if (svc->layer_context[svc->temporal_layer_id].is_key_frame) {// On key frame we update the buffer index used for long term reference.
// Use the alt_ref since it is not used or updated on key frames.
cpi->ext_refresh_alt_ref_frame = 1;
- cpi->alt_fb_idx = cpi->svc.buffer_idx_longterm_ref;
+ cpi->alt_fb_idx = svc->buffer_longterm_ref.idx;
} else if (rc->frames_till_gf_update_due == 0) {// Set perdiod of next update. Make it a multiple of 10, as the cyclic
// refresh is typically ~10%, and we'd like the update to happen after
@@ -1894,7 +1892,7 @@
cpi->ext_refresh_golden_frame = 1;
rc->gfu_boost = DEFAULT_GF_BOOST;
}
- } else if (!cpi->svc.use_longterm_ref) {+ } else if (!svc->use_longterm_ref) {rc->frames_till_gf_update_due = INT_MAX;
rc->baseline_gf_interval = INT_MAX;
}
--- a/vp9/encoder/vp9_svc_layercontext.c
+++ b/vp9/encoder/vp9_svc_layercontext.c
@@ -62,6 +62,9 @@
}
svc->max_consec_drop = INT_MAX;
+ svc->buffer_longterm_ref.idx = 7;
+ svc->buffer_longterm_ref.is_used = 0;
+
if (cpi->oxcf.error_resilient_mode == 0 && cpi->oxcf.pass == 2) {if (vpx_realloc_frame_buffer(&cpi->svc.empty_frame.img, SMALL_FRAME_WIDTH,
SMALL_FRAME_HEIGHT, cpi->common.subsampling_x,
@@ -673,24 +676,24 @@
int vp9_one_pass_cbr_svc_start_layer(VP9_COMP *const cpi) {int width = 0, height = 0;
+ SVC *const svc = &cpi->svc;
LAYER_CONTEXT *lc = NULL;
- cpi->svc.skip_enhancement_layer = 0;
- if (cpi->svc.number_spatial_layers > 1) {- cpi->svc.use_base_mv = 1;
- cpi->svc.use_partition_reuse = 1;
+ svc->skip_enhancement_layer = 0;
+ if (svc->number_spatial_layers > 1) {+ svc->use_base_mv = 1;
+ svc->use_partition_reuse = 1;
}
- cpi->svc.force_zero_mode_spatial_ref = 1;
- cpi->svc.mi_stride[cpi->svc.spatial_layer_id] = cpi->common.mi_stride;
+ svc->force_zero_mode_spatial_ref = 1;
+ svc->mi_stride[svc->spatial_layer_id] = cpi->common.mi_stride;
- if (cpi->svc.temporal_layering_mode == VP9E_TEMPORAL_LAYERING_MODE_0212) {+ if (svc->temporal_layering_mode == VP9E_TEMPORAL_LAYERING_MODE_0212) {set_flags_and_fb_idx_for_temporal_mode3(cpi);
- } else if (cpi->svc.temporal_layering_mode ==
+ } else if (svc->temporal_layering_mode ==
VP9E_TEMPORAL_LAYERING_MODE_NOLAYERING) {set_flags_and_fb_idx_for_temporal_mode_noLayering(cpi);
- } else if (cpi->svc.temporal_layering_mode ==
- VP9E_TEMPORAL_LAYERING_MODE_0101) {+ } else if (svc->temporal_layering_mode == VP9E_TEMPORAL_LAYERING_MODE_0101) {set_flags_and_fb_idx_for_temporal_mode2(cpi);
- } else if (cpi->svc.temporal_layering_mode ==
+ } else if (svc->temporal_layering_mode ==
VP9E_TEMPORAL_LAYERING_MODE_BYPASS) {// In the BYPASS/flexible mode, the encoder is relying on the application
// to specify, for each spatial layer, the flags and buffer indices for the
@@ -702,37 +705,41 @@
// this case.
if (cpi->ext_refresh_frame_flags_pending == 0) {int sl;
- cpi->svc.spatial_layer_id = cpi->svc.spatial_layer_to_encode;
- sl = cpi->svc.spatial_layer_id;
- vp9_apply_encoding_flags(cpi, cpi->svc.ext_frame_flags[sl]);
- cpi->lst_fb_idx = cpi->svc.lst_fb_idx[sl];
- cpi->gld_fb_idx = cpi->svc.gld_fb_idx[sl];
- cpi->alt_fb_idx = cpi->svc.alt_fb_idx[sl];
+ svc->spatial_layer_id = svc->spatial_layer_to_encode;
+ sl = svc->spatial_layer_id;
+ vp9_apply_encoding_flags(cpi, svc->ext_frame_flags[sl]);
+ cpi->lst_fb_idx = svc->lst_fb_idx[sl];
+ cpi->gld_fb_idx = svc->gld_fb_idx[sl];
+ cpi->alt_fb_idx = svc->alt_fb_idx[sl];
}
}
+ if (cpi->lst_fb_idx == svc->buffer_longterm_ref.idx ||
+ cpi->gld_fb_idx == svc->buffer_longterm_ref.idx ||
+ cpi->alt_fb_idx == svc->buffer_longterm_ref.idx)
+ svc->buffer_longterm_ref.is_used = 1;
+
// For the fixed (non-flexible/bypass) SVC mode:
// If long term temporal reference is enabled at the sequence level
// (use_longterm_ref == 1), and inter_layer is disabled (on inter-frames),
// we can use golden as a second temporal reference
// (since the spatial/inter-layer reference is disabled).
- // To be safe we use fb_index 7 for this, since for 3-3 layer system slot 7
- // should be free/un-used. For now usage of this second temporal reference
- // will only be used for highest spatial layer.
- cpi->svc.use_longterm_ref_current_layer = 0;
- cpi->svc.buffer_idx_longterm_ref = 7;
- if (cpi->svc.use_longterm_ref &&
- cpi->svc.temporal_layering_mode != VP9E_TEMPORAL_LAYERING_MODE_BYPASS &&
- cpi->svc.disable_inter_layer_pred != INTER_LAYER_PRED_ON &&
- cpi->svc.number_spatial_layers <= 3 &&
- cpi->svc.number_temporal_layers <= 3 &&
- cpi->svc.spatial_layer_id == cpi->svc.number_spatial_layers - 1) {+ // We check that the fb_idx for this reference (buffer_longterm_ref.idx) is
+ // unused (slot 7 should be available for 3-3 layer system).
+ // For now usage of this second temporal reference will only be used for
+ // highest spatial layer.
+ svc->use_longterm_ref_current_layer = 0;
+ if (svc->use_longterm_ref && !svc->buffer_longterm_ref.is_used &&
+ svc->temporal_layering_mode != VP9E_TEMPORAL_LAYERING_MODE_BYPASS &&
+ svc->disable_inter_layer_pred != INTER_LAYER_PRED_ON &&
+ svc->number_spatial_layers <= 3 && svc->number_temporal_layers <= 3 &&
+ svc->spatial_layer_id == svc->number_spatial_layers - 1) {// Enable the second (long-term) temporal reference at the frame-level.
- cpi->svc.use_longterm_ref_current_layer = 1;
+ svc->use_longterm_ref_current_layer = 1;
// Only used for prediction for on non-key superframes.
- if (!cpi->svc.layer_context[cpi->svc.temporal_layer_id].is_key_frame) {+ if (!svc->layer_context[svc->temporal_layer_id].is_key_frame) {// Use golden for this reference which will be used for prediction.
- cpi->gld_fb_idx = cpi->svc.buffer_idx_longterm_ref;
+ cpi->gld_fb_idx = svc->buffer_longterm_ref.idx;
// Enable prediction off LAST (last reference) and golden (which will
// generally be further behind/long-term reference).
cpi->ref_frame_flags = VP9_LAST_FLAG | VP9_GOLD_FLAG;
@@ -740,32 +747,31 @@
}
// Reset the drop flags for all spatial layers, on the base layer.
- if (cpi->svc.spatial_layer_id == 0) {- vp9_zero(cpi->svc.drop_spatial_layer);
- // TODO(jianj/marpan): Investigate why setting cpi->svc.lst/gld/alt_fb_idx
+ if (svc->spatial_layer_id == 0) {+ vp9_zero(svc->drop_spatial_layer);
+ // TODO(jianj/marpan): Investigate why setting svc->lst/gld/alt_fb_idx
// causes an issue with frame dropping and temporal layers, when the frame
// flags are passed via the encode call (bypass mode). Issue is that we're
// resetting ext_refresh_frame_flags_pending to 0 on frame drops.
- if (cpi->svc.temporal_layering_mode != VP9E_TEMPORAL_LAYERING_MODE_BYPASS) {- memset(&cpi->svc.lst_fb_idx, -1, sizeof(cpi->svc.lst_fb_idx));
- memset(&cpi->svc.gld_fb_idx, -1, sizeof(cpi->svc.lst_fb_idx));
- memset(&cpi->svc.alt_fb_idx, -1, sizeof(cpi->svc.lst_fb_idx));
+ if (svc->temporal_layering_mode != VP9E_TEMPORAL_LAYERING_MODE_BYPASS) {+ memset(&svc->lst_fb_idx, -1, sizeof(svc->lst_fb_idx));
+ memset(&svc->gld_fb_idx, -1, sizeof(svc->lst_fb_idx));
+ memset(&svc->alt_fb_idx, -1, sizeof(svc->lst_fb_idx));
}
- vp9_zero(cpi->svc.update_last);
- vp9_zero(cpi->svc.update_golden);
- vp9_zero(cpi->svc.update_altref);
- vp9_zero(cpi->svc.reference_last);
- vp9_zero(cpi->svc.reference_golden);
- vp9_zero(cpi->svc.reference_altref);
+ vp9_zero(svc->update_last);
+ vp9_zero(svc->update_golden);
+ vp9_zero(svc->update_altref);
+ vp9_zero(svc->reference_last);
+ vp9_zero(svc->reference_golden);
+ vp9_zero(svc->reference_altref);
}
- lc = &cpi->svc.layer_context[cpi->svc.spatial_layer_id *
- cpi->svc.number_temporal_layers +
- cpi->svc.temporal_layer_id];
+ lc = &svc->layer_context[svc->spatial_layer_id * svc->number_temporal_layers +
+ svc->temporal_layer_id];
// Setting the worst/best_quality via the encoder control: SET_SVC_PARAMETERS,
// only for non-BYPASS mode for now.
- if (cpi->svc.temporal_layering_mode != VP9E_TEMPORAL_LAYERING_MODE_BYPASS) {+ if (svc->temporal_layering_mode != VP9E_TEMPORAL_LAYERING_MODE_BYPASS) {RATE_CONTROL *const lrc = &lc->rc;
lrc->worst_quality = vp9_quantizer_to_qindex(lc->max_q);
lrc->best_quality = vp9_quantizer_to_qindex(lc->min_q);
@@ -777,15 +783,13 @@
// Use Eightap_smooth for low resolutions.
if (width * height <= 320 * 240)
- cpi->svc.downsample_filter_type[cpi->svc.spatial_layer_id] =
- EIGHTTAP_SMOOTH;
+ svc->downsample_filter_type[svc->spatial_layer_id] = EIGHTTAP_SMOOTH;
// For scale factors > 0.75, set the phase to 0 (aligns decimated pixel
// to source pixel).
- lc = &cpi->svc.layer_context[cpi->svc.spatial_layer_id *
- cpi->svc.number_temporal_layers +
- cpi->svc.temporal_layer_id];
+ lc = &svc->layer_context[svc->spatial_layer_id * svc->number_temporal_layers +
+ svc->temporal_layer_id];
if (lc->scaling_factor_num > (3 * lc->scaling_factor_den) >> 2)
- cpi->svc.downsample_filter_phase[cpi->svc.spatial_layer_id] = 0;
+ svc->downsample_filter_phase[svc->spatial_layer_id] = 0;
// The usage of use_base_mv or partition_reuse assumes down-scale of 2x2.
// For now, turn off use of base motion vectors and partition reuse if the
@@ -792,45 +796,45 @@
// spatial scale factors for any layers are not 2,
// keep the case of 3 spatial layers with scale factor of 4x4 for base layer.
// TODO(marpan): Fix this to allow for use_base_mv for scale factors != 2.
- if (cpi->svc.number_spatial_layers > 1) {+ if (svc->number_spatial_layers > 1) {int sl;
- for (sl = 0; sl < cpi->svc.number_spatial_layers - 1; ++sl) {- lc = &cpi->svc.layer_context[sl * cpi->svc.number_temporal_layers +
- cpi->svc.temporal_layer_id];
+ for (sl = 0; sl < svc->number_spatial_layers - 1; ++sl) {+ lc = &svc->layer_context[sl * svc->number_temporal_layers +
+ svc->temporal_layer_id];
if ((lc->scaling_factor_num != lc->scaling_factor_den >> 1) &&
!(lc->scaling_factor_num == lc->scaling_factor_den >> 2 && sl == 0 &&
- cpi->svc.number_spatial_layers == 3)) {- cpi->svc.use_base_mv = 0;
- cpi->svc.use_partition_reuse = 0;
+ svc->number_spatial_layers == 3)) {+ svc->use_base_mv = 0;
+ svc->use_partition_reuse = 0;
break;
}
}
// For non-zero spatial layers: if the previous spatial layer was dropped
// disable the base_mv and partition_reuse features.
- if (cpi->svc.spatial_layer_id > 0 &&
- cpi->svc.drop_spatial_layer[cpi->svc.spatial_layer_id - 1]) {- cpi->svc.use_base_mv = 0;
- cpi->svc.use_partition_reuse = 0;
+ if (svc->spatial_layer_id > 0 &&
+ svc->drop_spatial_layer[svc->spatial_layer_id - 1]) {+ svc->use_base_mv = 0;
+ svc->use_partition_reuse = 0;
}
}
- cpi->svc.non_reference_frame = 0;
+ svc->non_reference_frame = 0;
if (cpi->common.frame_type != KEY_FRAME && !cpi->ext_refresh_last_frame &&
!cpi->ext_refresh_golden_frame && !cpi->ext_refresh_alt_ref_frame) {- cpi->svc.non_reference_frame = 1;
+ svc->non_reference_frame = 1;
}
- if (cpi->svc.spatial_layer_id == 0) cpi->svc.high_source_sad_superframe = 0;
+ if (svc->spatial_layer_id == 0) svc->high_source_sad_superframe = 0;
- if (cpi->svc.temporal_layering_mode != VP9E_TEMPORAL_LAYERING_MODE_BYPASS &&
- cpi->svc.last_layer_dropped[cpi->svc.spatial_layer_id] &&
- cpi->svc.fb_idx_upd_tl0[cpi->svc.spatial_layer_id] != -1 &&
- !cpi->svc.layer_context[cpi->svc.temporal_layer_id].is_key_frame) {+ if (svc->temporal_layering_mode != VP9E_TEMPORAL_LAYERING_MODE_BYPASS &&
+ svc->last_layer_dropped[svc->spatial_layer_id] &&
+ svc->fb_idx_upd_tl0[svc->spatial_layer_id] != -1 &&
+ !svc->layer_context[svc->temporal_layer_id].is_key_frame) {// For fixed/non-flexible mode, if the previous frame (same spatial layer
// from previous superframe) was dropped, make sure the lst_fb_idx
// for this frame corresponds to the buffer index updated on (last) encoded
// TL0 frame (with same spatial layer).
- cpi->lst_fb_idx = cpi->svc.fb_idx_upd_tl0[cpi->svc.spatial_layer_id];
+ cpi->lst_fb_idx = svc->fb_idx_upd_tl0[svc->spatial_layer_id];
}
if (vp9_set_size_literal(cpi, width, height) != 0)
--- a/vp9/encoder/vp9_svc_layercontext.h
+++ b/vp9/encoder/vp9_svc_layercontext.h
@@ -32,6 +32,11 @@
INTER_LAYER_PRED_ON_CONSTRAINED
} INTER_LAYER_PRED;
+typedef struct BUFFER_LONGTERM_REF {+ int idx;
+ int is_used;
+} BUFFER_LONGTERM_REF;
+
typedef struct {RATE_CONTROL rc;
int target_bandwidth;
@@ -101,7 +106,7 @@
int use_longterm_ref;
// Frame level flag to enable second (long term) temporal reference.
int use_longterm_ref_current_layer;
- int buffer_idx_longterm_ref;
+ BUFFER_LONGTERM_REF buffer_longterm_ref;
int current_superframe;
int non_reference_frame;
int use_base_mv;