ref: 5c8431b9e4e0534f25031cf745b5d71b9492ee1e
dir: /build/make/Android.mk/
##
## Copyright (c) 2012 The WebM project authors. All Rights Reserved.
##
## Use of this source code is governed by a BSD-style license
## that can be found in the LICENSE file in the root of the source
## tree. An additional intellectual property rights grant can be found
## in the file PATENTS. All contributing project authors may
## be found in the AUTHORS file in the root of the source tree.
##
#
# This file is to be used for compiling libvpx for Android using the NDK.
# In an Android project place a libvpx checkout in the jni directory.
# Run the configure script from the jni directory. Base libvpx
# encoder/decoder configuration will look similar to:
# ./libvpx/configure --target=armv7-android-gcc --disable-examples \
# --enable-external-build
#
# When targeting Android, realtime-only is enabled by default. This can
# be overridden by adding the command line flag:
# --disable-realtime-only
#
# This will create .mk files that contain variables that contain the
# source files to compile.
#
# Place an Android.mk file in the jni directory that references the
# Android.mk file in the libvpx directory:
# LOCAL_PATH := $(call my-dir)
# include $(CLEAR_VARS)
# include jni/libvpx/build/make/Android.mk
#
# By default libvpx will use the 'cpufeatures' module from the NDK. This allows
# the library to be built with all available optimizations (SSE2->AVX512 for
# x86, NEON for arm, DSPr2 for mips). This can be disabled with
# --disable-runtime-cpu-detect
# but the resulting library *must* be run on devices supporting all of the
# enabled extensions. They can be disabled individually with
# --disable-{sse2, sse3, ssse3, sse4_1, avx, avx2, avx512}
# --disable-neon[-asm]
# --disable-{dspr2, msa}
#
# Running ndk-build will build libvpx and include it in your project.
#
CONFIG_DIR := $(LOCAL_PATH)/
LIBVPX_PATH := $(LOCAL_PATH)/libvpx
ASM_CNV_PATH_LOCAL := $(TARGET_ARCH_ABI)/ads2gas
ASM_CNV_PATH := $(LOCAL_PATH)/$(ASM_CNV_PATH_LOCAL)
ifneq ($(V),1)
qexec := @
endif
# Use the makefiles generated by upstream configure to determine which files to
# build. Also set any architecture-specific flags.
ifeq ($(TARGET_ARCH_ABI),armeabi-v7a)
include $(CONFIG_DIR)libs-armv7-android-gcc.mk
LOCAL_ARM_MODE := arm
else ifeq ($(TARGET_ARCH_ABI),arm64-v8a)
include $(CONFIG_DIR)libs-arm64-android-gcc.mk
LOCAL_ARM_MODE := arm
else ifeq ($(TARGET_ARCH_ABI),x86)
include $(CONFIG_DIR)libs-x86-android-gcc.mk
else ifeq ($(TARGET_ARCH_ABI),x86_64)
include $(CONFIG_DIR)libs-x86_64-android-gcc.mk
else ifeq ($(TARGET_ARCH_ABI),mips)
include $(CONFIG_DIR)libs-mips-android-gcc.mk
else
$(error Not a supported TARGET_ARCH_ABI: $(TARGET_ARCH_ABI))
endif
# Rule that is normally in Makefile created by libvpx
# configure. Used to filter out source files based on configuration.
enabled=$(filter-out $($(1)-no),$($(1)-yes))
# Override the relative path that is defined by the libvpx
# configure process
SRC_PATH_BARE := $(LIBVPX_PATH)
# Include the list of files to be built
include $(LIBVPX_PATH)/libs.mk
# Optimise the code. May want to revisit this setting in the future.
LOCAL_CFLAGS := -O3
# For x86, include the source code in the search path so it will find files
# like x86inc.asm and x86_abi_support.asm
LOCAL_ASMFLAGS := -I$(LIBVPX_PATH)
.PRECIOUS: %.asm.S
$(ASM_CNV_PATH)/libvpx/%.asm.S: $(LIBVPX_PATH)/%.asm
$(qexec)mkdir -p $(dir $@)
$(qexec)$(CONFIG_DIR)$(ASM_CONVERSION) <$< > $@
# For building *_rtcd.h, which have rules in libs.mk
TGT_ISA:=$(word 1, $(subst -, ,$(TOOLCHAIN)))
target := libs
LOCAL_SRC_FILES += vpx_config.c
# Remove duplicate entries
CODEC_SRCS_UNIQUE = $(sort $(CODEC_SRCS))
# Pull out C files. vpx_config.c is in the immediate directory and
# so it does not need libvpx/ prefixed like the rest of the source files.
# The neon files with intrinsics need to have .neon appended so the proper
# flags are applied.
CODEC_SRCS_C = $(filter %.c, $(CODEC_SRCS_UNIQUE))
LOCAL_NEON_SRCS_C = $(filter %_neon.c, $(CODEC_SRCS_C))
LOCAL_CODEC_SRCS_C = $(filter-out vpx_config.c %_neon.c, $(CODEC_SRCS_C))
LOCAL_SRC_FILES += $(foreach file, $(LOCAL_CODEC_SRCS_C), libvpx/$(file))
ifeq ($(TARGET_ARCH_ABI),armeabi-v7a)
LOCAL_SRC_FILES += $(foreach file, $(LOCAL_NEON_SRCS_C), libvpx/$(file).neon)
else # If there are neon sources then we are building for arm64 and do not need to specify .neon
LOCAL_SRC_FILES += $(foreach file, $(LOCAL_NEON_SRCS_C), libvpx/$(file))
endif
# Pull out assembly files, splitting NEON from the rest. This is
# done to specify that the NEON assembly files use NEON assembler flags.
# x86 assembly matches %.asm, arm matches %.asm.S
# x86:
CODEC_SRCS_ASM_X86 = $(filter %.asm, $(CODEC_SRCS_UNIQUE))
LOCAL_SRC_FILES += $(foreach file, $(CODEC_SRCS_ASM_X86), libvpx/$(file))
# arm:
CODEC_SRCS_ASM_ARM_ALL = $(filter %.asm.S, $(CODEC_SRCS_UNIQUE))
CODEC_SRCS_ASM_ARM = $(foreach v, \
$(CODEC_SRCS_ASM_ARM_ALL), \
$(if $(findstring neon,$(v)),,$(v)))
CODEC_SRCS_ASM_ADS2GAS = $(patsubst %.S, \
$(ASM_CNV_PATH_LOCAL)/libvpx/%.S, \
$(CODEC_SRCS_ASM_ARM))
LOCAL_SRC_FILES += $(CODEC_SRCS_ASM_ADS2GAS)
ifeq ($(TARGET_ARCH_ABI),armeabi-v7a)
ASM_INCLUDES := vpx_dsp/arm/idct_neon.asm.S
CODEC_SRCS_ASM_NEON = $(foreach v, \
$(CODEC_SRCS_ASM_ARM_ALL),\
$(if $(findstring neon,$(v)),$(v),))
CODEC_SRCS_ASM_NEON := $(filter-out $(addprefix %, $(ASM_INCLUDES)), \
$(CODEC_SRCS_ASM_NEON))
CODEC_SRCS_ASM_NEON_ADS2GAS = $(patsubst %.S, \
$(ASM_CNV_PATH_LOCAL)/libvpx/%.S, \
$(CODEC_SRCS_ASM_NEON))
LOCAL_SRC_FILES += $(patsubst %.S, \
%.S.neon, \
$(CODEC_SRCS_ASM_NEON_ADS2GAS))
NEON_ASM_TARGETS = $(patsubst %.S, \
$(ASM_CNV_PATH)/libvpx/%.S, \
$(CODEC_SRCS_ASM_NEON))
# add a dependency to the full path to the ads2gas output to ensure the
# includes are converted first.
ifneq ($(strip $(NEON_ASM_TARGETS)),)
$(NEON_ASM_TARGETS): $(addprefix $(ASM_CNV_PATH)/libvpx/, $(ASM_INCLUDES))
endif
endif
LOCAL_CFLAGS += \
-DHAVE_CONFIG_H=vpx_config.h \
-I$(LIBVPX_PATH) \
-I$(ASM_CNV_PATH) \
-I$(ASM_CNV_PATH)/libvpx
LOCAL_MODULE := libvpx
ifeq ($(CONFIG_RUNTIME_CPU_DETECT),yes)
LOCAL_STATIC_LIBRARIES := cpufeatures
endif
# Add a dependency to force generation of the RTCD files.
define rtcd_dep_template
rtcd_dep_template_SRCS := $(addprefix $(LOCAL_PATH)/, $(LOCAL_SRC_FILES))
rtcd_dep_template_SRCS := $$(rtcd_dep_template_SRCS:.neon=)
ifeq ($(CONFIG_VP8), yes)
$$(rtcd_dep_template_SRCS): vp8_rtcd.h
endif
ifeq ($(CONFIG_VP9), yes)
$$(rtcd_dep_template_SRCS): vp9_rtcd.h
endif
$$(rtcd_dep_template_SRCS): vpx_scale_rtcd.h
$$(rtcd_dep_template_SRCS): vpx_dsp_rtcd.h
rtcd_dep_template_CONFIG_ASM_ABIS := x86 x86_64 armeabi-v7a
ifneq ($$(findstring $(TARGET_ARCH_ABI),$$(rtcd_dep_template_CONFIG_ASM_ABIS)),)
$$(rtcd_dep_template_SRCS): vpx_config.asm
endif
endef
$(eval $(call rtcd_dep_template))
.PHONY: clean
clean:
@echo "Clean: ads2gas files [$(TARGET_ARCH_ABI)]"
$(qexec)$(RM) $(CODEC_SRCS_ASM_ADS2GAS) $(CODEC_SRCS_ASM_NEON_ADS2GAS)
$(qexec)$(RM) -r $(ASM_CNV_PATH)
$(qexec)$(RM) $(CLEAN-OBJS)
ifeq ($(ENABLE_SHARED),1)
LOCAL_CFLAGS += -fPIC
include $(BUILD_SHARED_LIBRARY)
else
include $(BUILD_STATIC_LIBRARY)
endif
ifeq ($(CONFIG_RUNTIME_CPU_DETECT),yes)
$(call import-module,android/cpufeatures)
endif