shithub: libvpx

Download patch

ref: 702e25839e98c8776e33574288413b8eff41e502
parent: 00d54aa331fc060e553c7b4bcf45947f2b96edb0
author: Paul Wilkins <[email protected]>
date: Fri May 9 13:32:05 EDT 2014 

Clean up of firstpass.c

Re-factor duplicate code.
Add two pass check for use of section_intra_rating as
it is un-initialised in the 1 pass and rt case.

Change-Id: I93120796f07961b8a21fb26e1a9f0d3d13949994


--- a/vp9/encoder/vp9_firstpass.c
+++ b/vp9/encoder/vp9_firstpass.c
@@ -1417,6 +1417,30 @@
 }
 #endif
 
+// Calculate a section intra ratio used in setting max loop filter.
+static void calculate_section_intra_ratio(struct twopass_rc *twopass,
+                                          const FIRSTPASS_STATS *start_pos,
+                                          int section_length) {
+  FIRSTPASS_STATS next_frame = { 0 };
+  FIRSTPASS_STATS sectionstats = { 0 };
+  int i;
+
+  reset_fpf_position(twopass, start_pos);
+
+  for (i = 0; i < section_length; ++i) {
+    input_stats(twopass, &next_frame);
+    accumulate_stats(&sectionstats, &next_frame);
+  }
+
+  avg_stats(&sectionstats);
+
+  twopass->section_intra_rating =
+    (int)(sectionstats.intra_error /
+          DOUBLE_DIVIDE_CHECK(sectionstats.coded_error));
+
+  reset_fpf_position(twopass, start_pos);
+}
+
 // Calculate the total bits to allocate in this GF/ARF group.
 static int64_t calculate_total_gf_group_bits(VP9_COMP *cpi,
                                              double gf_group_err) {
@@ -1795,24 +1819,9 @@
     }
   }
 
+  // Calculate a section intra ratio used in setting max loop filter.
   if (cpi->common.frame_type != KEY_FRAME) {
-    FIRSTPASS_STATS sectionstats;
-
-    zero_stats(&sectionstats);
-    reset_fpf_position(twopass, start_pos);
-
-    for (i = 0; i < rc->baseline_gf_interval; ++i) {
-      input_stats(twopass, &next_frame);
-      accumulate_stats(&sectionstats, &next_frame);
-    }
-
-    avg_stats(&sectionstats);
-
-    twopass->section_intra_rating = (int)
-      (sectionstats.intra_error /
-      DOUBLE_DIVIDE_CHECK(sectionstats.coded_error));
-
-    reset_fpf_position(twopass, start_pos);
+    calculate_section_intra_ratio(twopass, start_pos, rc->baseline_gf_interval);
   }
 }
 
@@ -2108,25 +2117,8 @@
     }
   }
 
-  {
-    FIRSTPASS_STATS sectionstats;
-
-    zero_stats(&sectionstats);
-    reset_fpf_position(twopass, start_position);
-
-    for (i = 0; i < rc->frames_to_key; ++i) {
-      input_stats(twopass, &next_frame);
-      accumulate_stats(&sectionstats, &next_frame);
-    }
-
-    avg_stats(&sectionstats);
-
-    twopass->section_intra_rating = (int) (sectionstats.intra_error /
-        DOUBLE_DIVIDE_CHECK(sectionstats.coded_error));
-  }
-
-  // Reset the first pass file position.
-  reset_fpf_position(twopass, start_position);
+  // Calculate a section intra ratio used in setting max loop filter.
+  calculate_section_intra_ratio(twopass, start_position, rc->frames_to_key);
 
   // Work out how many bits to allocate for the key frame itself.
   if (1) {
--- a/vp9/encoder/vp9_picklpf.c
+++ b/vp9/encoder/vp9_picklpf.c
@@ -24,8 +24,12 @@
 #include "vp9/encoder/vp9_quantize.h"
 
 static int get_max_filter_level(const VP9_COMP *cpi) {
-  return cpi->twopass.section_intra_rating > 8 ? MAX_LOOP_FILTER * 3 / 4
-                                               : MAX_LOOP_FILTER;
+  if (cpi->pass == 2) {
+    return cpi->twopass.section_intra_rating > 8 ? MAX_LOOP_FILTER * 3 / 4
+                                                 : MAX_LOOP_FILTER;
+  } else {
+    return MAX_LOOP_FILTER;
+  }
 }
 
 
@@ -77,8 +81,8 @@
     // Bias against raising loop filter in favor of lowering it.
     int bias = (best_err >> (15 - (filt_mid / 8))) * filter_step;
 
-    if (cpi->twopass.section_intra_rating < 20)
-      bias = bias * cpi->twopass.section_intra_rating / 20;
+    if ((cpi->pass == 2) && (cpi->twopass.section_intra_rating < 20))
+      bias = (bias * cpi->twopass.section_intra_rating) / 20;
 
     // yx, bias less for large block size
     if (cm->tx_mode != ONLY_4X4)