ref: 821f02947e0500e48eb0c48611f0bcda9b135a2b
parent: 5c055cc4cfb0be3b42e0b9ac8a7575f7d6a2dad0
author: Johann <[email protected]>
date: Tue Aug 25 12:45:09 EDT 2015
Clean up unused function warnings in vp8 onyx_if.c Remove really unused segmentation_test_function Hide decide_key_frame and recode_loop_test under non-realtime check. Change-Id: Ie0113945ffbd096dbb89a553548f526b2a0ee0c6
--- a/vp8/encoder/onyx_if.c
+++ b/vp8/encoder/onyx_if.c
@@ -516,41 +516,6 @@
}
-static void segmentation_test_function(VP8_COMP *cpi)
-{- unsigned char *seg_map;
- signed char feature_data[MB_LVL_MAX][MAX_MB_SEGMENTS];
-
- // Create a temporary map for segmentation data.
- CHECK_MEM_ERROR(seg_map, vpx_calloc(cpi->common.mb_rows * cpi->common.mb_cols, 1));
-
- // Set the segmentation Map
- set_segmentation_map(cpi, seg_map);
-
- // Activate segmentation.
- enable_segmentation(cpi);
-
- // Set up the quant segment data
- feature_data[MB_LVL_ALT_Q][0] = 0;
- feature_data[MB_LVL_ALT_Q][1] = 4;
- feature_data[MB_LVL_ALT_Q][2] = 0;
- feature_data[MB_LVL_ALT_Q][3] = 0;
- // Set up the loop segment data
- feature_data[MB_LVL_ALT_LF][0] = 0;
- feature_data[MB_LVL_ALT_LF][1] = 0;
- feature_data[MB_LVL_ALT_LF][2] = 0;
- feature_data[MB_LVL_ALT_LF][3] = 0;
-
- // Initialise the feature data structure
- // SEGMENT_DELTADATA 0, SEGMENT_ABSDATA 1
- set_segment_data(cpi, &feature_data[0][0], SEGMENT_DELTADATA);
-
- // Delete sementation map
- vpx_free(seg_map);
-
- seg_map = 0;
-}
-
/* A simple function to cyclically refresh the background at a lower Q */
static void cyclic_background_refresh(VP8_COMP *cpi, int Q, int lf_adjustment)
{@@ -913,7 +878,7 @@
Speed = cpi->Speed;
switch (Mode)
{-#if !(CONFIG_REALTIME_ONLY)
+#if !CONFIG_REALTIME_ONLY
case 0: /* best quality mode */
sf->first_step = 0;
sf->max_step_search_steps = MAX_MVSEARCH_STEPS;
@@ -2065,7 +2030,7 @@
cpi->output_pkt_list = oxcf->output_pkt_list;
-#if !(CONFIG_REALTIME_ONLY)
+#if !CONFIG_REALTIME_ONLY
if (cpi->pass == 1)
{@@ -2227,7 +2192,7 @@
if (cpi && (cpi->common.current_video_frame > 0))
{-#if !(CONFIG_REALTIME_ONLY)
+#if !CONFIG_REALTIME_ONLY
if (cpi->pass == 2)
{@@ -3018,6 +2983,7 @@
}
+#if !CONFIG_REALTIME_ONLY
/* 1 = key, 0 = inter */
static int decide_key_frame(VP8_COMP *cpi)
{@@ -3085,7 +3051,6 @@
}
-#if !(CONFIG_REALTIME_ONLY)
static void Pass1Encode(VP8_COMP *cpi, unsigned long *size, unsigned char *dest, unsigned int *frame_flags)
{(void) size;
@@ -3131,6 +3096,7 @@
#endif
/* return of 0 means drop frame */
+#if !CONFIG_REALTIME_ONLY
/* Function to test for conditions that indeicate we should loop
* back and recode a frame.
*/
@@ -3180,6 +3146,7 @@
return force_recode;
}
+#endif // !CONFIG_REALTIME_ONLY
static void update_reference_frames(VP8_COMP *cpi)
{@@ -3601,7 +3568,7 @@
VP8_COMMON *cm = &cpi->common;
int active_worst_qchanged = 0;
-#if !(CONFIG_REALTIME_ONLY)
+#if !CONFIG_REALTIME_ONLY
int q_low;
int q_high;
int zbin_oq_high;
@@ -3640,7 +3607,7 @@
/* For an alt ref frame in 2 pass we skip the call to the second pass
* function that sets the target bandwidth
*/
-#if !(CONFIG_REALTIME_ONLY)
+#if !CONFIG_REALTIME_ONLY
if (cpi->pass == 2)
{@@ -4149,7 +4116,7 @@
/* Determine initial Q to try */
Q = vp8_regulate_q(cpi, cpi->this_frame_target);
-#if !(CONFIG_REALTIME_ONLY)
+#if !CONFIG_REALTIME_ONLY
/* Set highest allowed value for Zbin over quant */
if (cm->frame_type == KEY_FRAME)
@@ -4179,7 +4146,7 @@
vp8_compute_frame_size_bounds(cpi, &frame_under_shoot_limit, &frame_over_shoot_limit);
-#if !(CONFIG_REALTIME_ONLY)
+#if !CONFIG_REALTIME_ONLY
/* Limit Q range for the adaptive loop. */
bottom_index = cpi->active_best_quality;
top_index = cpi->active_worst_quality;
@@ -4410,7 +4377,7 @@
if (cpi->pass != 2 && cpi->oxcf.auto_key && cm->frame_type != KEY_FRAME
&& cpi->compressor_speed != 2)
{-#if !(CONFIG_REALTIME_ONLY)
+#if !CONFIG_REALTIME_ONLY
if (decide_key_frame(cpi))
{/* Reset all our sizing numbers and recode */
@@ -4466,9 +4433,9 @@
/* Assume 1 qstep = about 4% on frame size. */
over_size_percent = (int)(over_size_percent * 0.96);
}
-#if !(CONFIG_REALTIME_ONLY)
+#if !CONFIG_REALTIME_ONLY
top_index = cpi->active_worst_quality;
-#endif
+#endif // !CONFIG_REALTIME_ONLY
/* If we have updated the active max Q do not call
* vp8_update_rate_correction_factors() this loop.
*/
@@ -4477,7 +4444,7 @@
else
active_worst_qchanged = 0;
-#if !(CONFIG_REALTIME_ONLY)
+#if !CONFIG_REALTIME_ONLY
/* Special case handling for forced key frames */
if ( (cm->frame_type == KEY_FRAME) && cpi->this_key_frame_forced )
{@@ -5215,7 +5182,7 @@
}
-#if !(CONFIG_REALTIME_ONLY)
+#if !CONFIG_REALTIME_ONLY
static void Pass2Encode(VP8_COMP *cpi, unsigned long *size, unsigned char *dest, unsigned char * dest_end, unsigned int *frame_flags)
{@@ -5299,7 +5266,7 @@
cpi->source = NULL;
-#if !(CONFIG_REALTIME_ONLY)
+#if !CONFIG_REALTIME_ONLY
/* Should we code an alternate reference frame */
if (cpi->oxcf.error_resilient_mode == 0 &&
cpi->oxcf.play_alternate &&
@@ -5367,7 +5334,7 @@
else
{*size = 0;
-#if !(CONFIG_REALTIME_ONLY)
+#if !CONFIG_REALTIME_ONLY
if (flush && cpi->pass == 1 && !cpi->twopass.first_pass_done)
{@@ -5560,7 +5527,7 @@
assert(i < NUM_YV12_BUFFERS );
}
-#if !(CONFIG_REALTIME_ONLY)
+#if !CONFIG_REALTIME_ONLY
if (cpi->pass == 1)
{