ref: baa4a290ebb9c4030a20c6d80b0e5c098d5dd309
parent: 3628975a15dbb02f1b61edc49b831c67ace278b4
parent: 7e3a82c3847c9f6f84f2a2f7cf3ea2aab0388053
author: Marco Paniconi <[email protected]>
date: Thu Jan 12 12:54:41 EST 2017
Merge "vp9: Make the denoiser work with spatial SVC."
--- a/test/datarate_test.cc
+++ b/test/datarate_test.cc
@@ -1073,6 +1073,7 @@
duration_ = 0.0;
mismatch_psnr_ = 0.0;
mismatch_nframes_ = 0;
+ denoiser_on_ = 0;
}
virtual void BeginPassHook(unsigned int /*pass*/) {}virtual void PreEncodeFrameHook(::libvpx_test::VideoSource *video,
@@ -1087,6 +1088,8 @@
for (i = 1; i < VPX_SS_MAX_LAYERS; ++i) {svc_params_.speed_per_layer[i] = speed_setting_;
}
+
+ encoder->Control(VP9E_SET_NOISE_SENSITIVITY, denoiser_on_);
encoder->Control(VP9E_SET_SVC, 1);
encoder->Control(VP9E_SET_SVC_PARAMETERS, &svc_params_);
encoder->Control(VP8E_SET_CPUUSED, speed_setting_);
@@ -1149,6 +1152,7 @@
int speed_setting_;
double mismatch_psnr_;
int mismatch_nframes_;
+ int denoiser_on_;
};
static void assign_layer_bitrates(vpx_codec_enc_cfg_t *const enc_cfg,
const vpx_svc_extra_cfg_t *svc_params,
@@ -1211,6 +1215,49 @@
for (int i = 200; i <= 800; i += 200) {cfg_.rc_target_bitrate = i;
ResetModel();
+ assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
+ cfg_.ts_number_layers, cfg_.temporal_layering_mode);
+ ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
+ ASSERT_GE(cfg_.rc_target_bitrate, file_datarate_ * 0.85)
+ << " The datarate for the file exceeds the target by too much!";
+ ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.15)
+ << " The datarate for the file is lower than the target by too much!";
+ EXPECT_EQ(static_cast<unsigned int>(0), GetMismatchFrames());
+ }
+}
+
+// Check basic rate targeting for 1 pass CBR SVC with denoising.
+// 2 spatial layers and 3 temporal layer. Run CIF clip with 1 thread.
+TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc2SpatialLayersDenoiserOn) {+ cfg_.rc_buf_initial_sz = 500;
+ cfg_.rc_buf_optimal_sz = 500;
+ cfg_.rc_buf_sz = 1000;
+ cfg_.rc_min_quantizer = 0;
+ cfg_.rc_max_quantizer = 63;
+ cfg_.rc_end_usage = VPX_CBR;
+ cfg_.g_lag_in_frames = 0;
+ cfg_.ss_number_layers = 2;
+ cfg_.ts_number_layers = 3;
+ cfg_.ts_rate_decimator[0] = 4;
+ cfg_.ts_rate_decimator[1] = 2;
+ cfg_.ts_rate_decimator[2] = 1;
+ cfg_.g_error_resilient = 1;
+ cfg_.g_threads = 1;
+ cfg_.temporal_layering_mode = 3;
+ svc_params_.scaling_factor_num[0] = 144;
+ svc_params_.scaling_factor_den[0] = 288;
+ svc_params_.scaling_factor_num[1] = 288;
+ svc_params_.scaling_factor_den[1] = 288;
+ cfg_.rc_dropframe_thresh = 10;
+ cfg_.kf_max_dist = 9999;
+ ::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,+ 30, 1, 0, 200);
+ // TODO(marpan): Check that effective_datarate for each layer hits the
+ // layer target_bitrate.
+ for (int i = 200; i <= 800; i += 200) {+ cfg_.rc_target_bitrate = i;
+ ResetModel();
+ denoiser_on_ = 1;
assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
cfg_.ts_number_layers, cfg_.temporal_layering_mode);
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
--- a/vp9/encoder/vp9_denoiser.c
+++ b/vp9/encoder/vp9_denoiser.c
@@ -187,7 +187,8 @@
static VP9_DENOISER_DECISION perform_motion_compensation(
VP9_DENOISER *denoiser, MACROBLOCK *mb, BLOCK_SIZE bs,
int increase_denoising, int mi_row, int mi_col, PICK_MODE_CONTEXT *ctx,
- int motion_magnitude, int is_skin, int *zeromv_filter, int consec_zeromv) {+ int motion_magnitude, int is_skin, int *zeromv_filter, int consec_zeromv,
+ int num_spatial_layers) {int sse_diff = ctx->zeromv_sse - ctx->newmv_sse;
MV_REFERENCE_FRAME frame;
MACROBLOCKD *filter_mbd = &mb->e_mbd;
@@ -211,7 +212,9 @@
// If the best reference frame uses inter-prediction and there is enough of a
// difference in sum-squared-error, use it.
- if (frame != INTRA_FRAME && ctx->newmv_sse != UINT_MAX &&
+ if (frame != INTRA_FRAME &&
+ (frame != GOLDEN_FRAME || num_spatial_layers == 1) &&
+ ctx->newmv_sse != UINT_MAX &&
sse_diff > sse_diff_thresh(bs, increase_denoising, motion_magnitude)) {mi->ref_frame[0] = ctx->best_reference_frame;
mi->mode = ctx->best_sse_inter_mode;
@@ -221,9 +224,10 @@
frame = ctx->best_zeromv_reference_frame;
ctx->newmv_sse = ctx->zeromv_sse;
// Bias to last reference.
- if (frame != LAST_FRAME &&
- ((ctx->zeromv_lastref_sse<(5 * ctx->zeromv_sse)>> 2) ||
- denoiser->denoising_level >= kDenHigh)) {+ if (num_spatial_layers > 1 ||
+ (frame != LAST_FRAME &&
+ ((ctx->zeromv_lastref_sse<(5 * ctx->zeromv_sse)>> 2) ||
+ denoiser->denoising_level >= kDenHigh))) {frame = LAST_FRAME;
ctx->newmv_sse = ctx->zeromv_lastref_sse;
}
@@ -361,7 +365,8 @@
if (denoiser->denoising_level >= kDenLow)
decision = perform_motion_compensation(
denoiser, mb, bs, denoiser->increase_denoising, mi_row, mi_col, ctx,
- motion_magnitude, is_skin, &zeromv_filter, consec_zeromv);
+ motion_magnitude, is_skin, &zeromv_filter, consec_zeromv,
+ cpi->svc.number_spatial_layers);
if (decision == FILTER_BLOCK) {decision = vp9_denoiser_filter(
--- a/vp9/encoder/vp9_encoder.c
+++ b/vp9/encoder/vp9_encoder.c
@@ -2568,7 +2568,7 @@
sizeof(cpi->interp_filter_selected[0]));
}
#if CONFIG_VP9_TEMPORAL_DENOISING
- if (cpi->oxcf.noise_sensitivity > 0 &&
+ if (cpi->oxcf.noise_sensitivity > 0 && denoise_svc(cpi) &&
cpi->denoiser.denoising_level > kDenLowLow) {vp9_denoiser_update_frame_info(
&cpi->denoiser, *cpi->Source, cpi->common.frame_type,
--- a/vp9/encoder/vp9_encoder.h
+++ b/vp9/encoder/vp9_encoder.h
@@ -765,6 +765,14 @@
return (cpi->use_svc && cpi->oxcf.pass == 0);
}
+#if CONFIG_VP9_TEMPORAL_DENOISING
+static INLINE int denoise_svc(const struct VP9_COMP *const cpi) {+ return (!cpi->use_svc ||
+ (cpi->use_svc &&
+ cpi->svc.spatial_layer_id == cpi->svc.number_spatial_layers - 1));
+}
+#endif
+
static INLINE int is_altref_enabled(const VP9_COMP *const cpi) {return !(cpi->oxcf.mode == REALTIME && cpi->oxcf.rc_mode == VPX_CBR) &&
cpi->oxcf.lag_in_frames > 0 &&
--- a/vp9/encoder/vp9_noise_estimate.c
+++ b/vp9/encoder/vp9_noise_estimate.c
@@ -40,8 +40,8 @@
static int enable_noise_estimation(VP9_COMP *const cpi) {// Enable noise estimation if denoising is on, but not for low resolutions.
#if CONFIG_VP9_TEMPORAL_DENOISING
- if (cpi->oxcf.noise_sensitivity > 0 && cpi->common.width >= 640 &&
- cpi->common.height >= 360)
+ if (cpi->oxcf.noise_sensitivity > 0 && denoise_svc(cpi) &&
+ cpi->common.width >= 640 && cpi->common.height >= 360)
return 1;
#endif
// Only allow noise estimate under certain encoding mode.
@@ -101,17 +101,22 @@
unsigned int thresh_sum_spatial = (200 * 200) << 8;
unsigned int thresh_spatial_var = (32 * 32) << 8;
int min_blocks_estimate = cm->mi_rows * cm->mi_cols >> 7;
+ int frame_counter = cm->current_video_frame;
// Estimate is between current source and last source.
YV12_BUFFER_CONFIG *last_source = cpi->Last_Source;
#if CONFIG_VP9_TEMPORAL_DENOISING
- if (cpi->oxcf.noise_sensitivity > 0) last_source = &cpi->denoiser.last_source;
+ if (cpi->oxcf.noise_sensitivity > 0 && denoise_svc(cpi))
+ last_source = &cpi->denoiser.last_source;
#endif
ne->enabled = enable_noise_estimation(cpi);
- if (!ne->enabled || cm->current_video_frame % frame_period != 0 ||
- last_source == NULL || ne->last_w != cm->width ||
- ne->last_h != cm->height) {+ if (cpi->svc.number_spatial_layers > 1)
+ frame_counter = cpi->svc.current_superframe;
+ if (!ne->enabled || frame_counter % frame_period != 0 ||
+ last_source == NULL ||
+ (cpi->svc.number_spatial_layers == 1 &&
+ (ne->last_w != cm->width || ne->last_h != cm->height))) {#if CONFIG_VP9_TEMPORAL_DENOISING
- if (cpi->oxcf.noise_sensitivity > 0)
+ if (cpi->oxcf.noise_sensitivity > 0 && denoise_svc(cpi))
copy_frame(&cpi->denoiser.last_source, cpi->Source);
#endif
if (last_source != NULL) {@@ -123,7 +128,7 @@
// Force noise estimation to 0 and denoiser off if content has high motion.
ne->level = kLowLow;
#if CONFIG_VP9_TEMPORAL_DENOISING
- if (cpi->oxcf.noise_sensitivity > 0)
+ if (cpi->oxcf.noise_sensitivity > 0 && denoise_svc(cpi))
vp9_denoiser_set_noise_level(&cpi->denoiser, ne->level);
#endif
return;
@@ -232,7 +237,7 @@
ne->count = 0;
ne->level = vp9_noise_estimate_extract_level(ne);
#if CONFIG_VP9_TEMPORAL_DENOISING
- if (cpi->oxcf.noise_sensitivity > 0)
+ if (cpi->oxcf.noise_sensitivity > 0 && denoise_svc(cpi))
vp9_denoiser_set_noise_level(&cpi->denoiser, ne->level);
#endif
}
@@ -239,7 +244,7 @@
}
}
#if CONFIG_VP9_TEMPORAL_DENOISING
- if (cpi->oxcf.noise_sensitivity > 0)
+ if (cpi->oxcf.noise_sensitivity > 0 && denoise_svc(cpi))
copy_frame(&cpi->denoiser.last_source, cpi->Source);
#endif
}
--- a/vp9/encoder/vp9_pickmode.c
+++ b/vp9/encoder/vp9_pickmode.c
@@ -1239,6 +1239,7 @@
ctx_den->zero_last_cost_orig < (best_rdc->rdcost << 3) &&
((ctx_den->best_ref_frame == INTRA_FRAME && decision >= FILTER_BLOCK) ||
(ctx_den->best_ref_frame == GOLDEN_FRAME &&
+ cpi->svc.number_spatial_layers == 1 &&
decision == FILTER_ZEROMV_BLOCK))) {// Check if we should pick ZEROMV on denoised signal.
int rate = 0;
@@ -1459,7 +1460,7 @@
}
#if CONFIG_VP9_TEMPORAL_DENOISING
- if (cpi->oxcf.noise_sensitivity > 0 &&
+ if (cpi->oxcf.noise_sensitivity > 0 && denoise_svc(cpi) &&
cpi->denoiser.denoising_level > kDenLowLow) {vp9_denoiser_reset_frame_stats(ctx);
}
@@ -1885,7 +1886,7 @@
}
#if CONFIG_VP9_TEMPORAL_DENOISING
- if (cpi->oxcf.noise_sensitivity > 0 &&
+ if (cpi->oxcf.noise_sensitivity > 0 && denoise_svc(cpi) &&
cpi->denoiser.denoising_level > kDenLowLow) {vp9_denoiser_update_frame_stats(mi, sse_y, this_mode, ctx);
// Keep track of zero_last cost.
@@ -2078,7 +2079,8 @@
#if CONFIG_VP9_TEMPORAL_DENOISING
if (cpi->oxcf.noise_sensitivity > 0 && cpi->resize_pending == 0 &&
- cpi->denoiser.denoising_level > kDenLowLow && cpi->denoiser.reset == 0) {+ denoise_svc(cpi) && cpi->denoiser.denoising_level > kDenLowLow &&
+ cpi->denoiser.reset == 0) {VP9_DENOISER_DECISION decision = COPY_BLOCK;
vp9_pickmode_ctx_den_update(&ctx_den, zero_last_cost_orig, ref_frame_cost,
frame_mv, reuse_inter_pred, best_tx_size,