shithub: libvpx

Info  •  Files  •  Log  •  Branches

Fix calculations in GF only group case

- Fix the number of frames considered in calculation of
  twopass active worst quality. For GF only group, frames
  considered should be one less than baseline gf interval
  accounting for the golden frame.
- Fix in calculation of normal_frames. As baseline gf
  interval includes the golden frame, the number of
  normal frames should be one less than baseline gf
  interval.

Change-Id: I6c0cd0a39db23586fc390a6fba5d7aebc0dfce08

--- a/vp9/encoder/vp9_firstpass.c

+++ b/vp9/encoder/vp9_firstpass.c

@@ -2048,10 +2048,15 @@

 // Calculate the total bits to allocate in this GF/ARF group.

 static int64_t calculate_total_gf_group_bits(VP9_COMP *cpi,

                                              double gf_group_err) {

+  VP9_COMMON *const cm = &cpi->common;

   const RATE_CONTROL *const rc = &cpi->rc;

   const TWO_PASS *const twopass = &cpi->twopass;

   const int max_bits = frame_max_bits(rc, &cpi->oxcf);

   int64_t total_group_bits;

+  const int is_key_frame = frame_is_intra_only(cm);

+  const int arf_active_or_kf = is_key_frame || rc->source_alt_ref_active;

+  int gop_frames =

+      rc->baseline_gf_interval + rc->source_alt_ref_pending - arf_active_or_kf;

   // Calculate the bits to be allocated to the group as a whole.

   if ((twopass->kf_group_bits > 0) && (twopass->kf_group_error_left > 0.0)) {

@@ -2069,8 +2074,8 @@

                                : total_group_bits;

   // Clip based on user supplied data rate variability limit.

-  if (total_group_bits > (int64_t)max_bits * rc->baseline_gf_interval)

-    total_group_bits = (int64_t)max_bits * rc->baseline_gf_interval;

+  if (total_group_bits > (int64_t)max_bits * gop_frames)

+    total_group_bits = (int64_t)max_bits * gop_frames;

   return total_group_bits;

 }

@@ -2290,7 +2295,7 @@

   // Define middle frame

   mid_frame_idx = frame_index + (rc->baseline_gf_interval >> 1) - 1;

-  normal_frames = (rc->baseline_gf_interval - rc->source_alt_ref_pending);

+  normal_frames = (rc->baseline_gf_interval - 1);

   if (normal_frames > 1)

     normal_frame_bits = (int)(total_group_bits / normal_frames);

   else

@@ -2452,6 +2457,7 @@

   const int arf_active_or_kf = is_key_frame || rc->source_alt_ref_active;

   double gop_intra_factor = 1.0;

+  int gop_frames;

   // Reset the GF group data structures unless this is a key

   // frame in which case it will already have been done.

@@ -2664,9 +2670,11 @@

   // Calculate the bits to be allocated to the gf/arf group as a whole

   gf_group_bits = calculate_total_gf_group_bits(cpi, gf_group_err);

+  gop_frames =

+      rc->baseline_gf_interval + rc->source_alt_ref_pending - arf_active_or_kf;

+

   // Store the average moise level measured for the group

-  twopass->gf_group.group_noise_energy =

-      (int)(gf_group_noise / rc->baseline_gf_interval);

+  twopass->gf_group.group_noise_energy = (int)(gf_group_noise / gop_frames);

   // Calculate an estimate of the maxq needed for the group.

   // We are more aggressive about correcting for sections

@@ -2674,15 +2682,12 @@

   // sections where we do not wish to risk creating an overshoot

   // of the allocated bit budget.

   if ((cpi->oxcf.rc_mode != VPX_Q) && (rc->baseline_gf_interval > 1)) {

-    const int vbr_group_bits_per_frame =

-        (int)(gf_group_bits / rc->baseline_gf_interval);

-    const double group_av_err = gf_group_raw_error / rc->baseline_gf_interval;

-    const double group_av_noise = gf_group_noise / rc->baseline_gf_interval;

-    const double group_av_skip_pct =

-        gf_group_skip_pct / rc->baseline_gf_interval;

-    const double group_av_inactive_zone =

-        ((gf_group_inactive_zone_rows * 2) /

-         (rc->baseline_gf_interval * (double)cm->mb_rows));

+    const int vbr_group_bits_per_frame = (int)(gf_group_bits / gop_frames);

+    const double group_av_err = gf_group_raw_error / gop_frames;

+    const double group_av_noise = gf_group_noise / gop_frames;

+    const double group_av_skip_pct = gf_group_skip_pct / gop_frames;

+    const double group_av_inactive_zone = ((gf_group_inactive_zone_rows * 2) /

+                                           (gop_frames * (double)cm->mb_rows));

     int tmp_q = get_twopass_worst_quality(

         cpi, group_av_err, (group_av_skip_pct + group_av_inactive_zone),

         group_av_noise, vbr_group_bits_per_frame);

@@ -2698,9 +2703,9 @@

   // Context Adjustment of ARNR filter strength

   if (rc->baseline_gf_interval > 1) {

-    adjust_group_arnr_filter(cpi, (gf_group_noise / rc->baseline_gf_interval),

-                             (gf_group_inter / rc->baseline_gf_interval),

-                             (gf_group_motion / rc->baseline_gf_interval));

+    adjust_group_arnr_filter(cpi, (gf_group_noise / gop_frames),

+                             (gf_group_inter / gop_frames),

+                             (gf_group_motion / gop_frames));

   } else {

     twopass->arnr_strength_adjustment = 0;

   }