ref: d108775255e8092662a6b2337dcb754f2455186d
parent: 8345e76d61fc6feae762208453c3d0c19aa6163d
parent: 03a9e5edb61c4ef55cfe1f1473d878a6182a3158
author: Marco Paniconi <[email protected]>
date: Fri Mar 21 13:17:53 EDT 2014
Merge "Rename the aq_mode files."
--- /dev/null
+++ b/vp9/encoder/vp9_aq_cyclicrefresh.c
@@ -1,0 +1,267 @@
+/*
+ * Copyright (c) 2014 The WebM project authors. All Rights Reserved.
+ *
+ * Use of this source code is governed by a BSD-style license
+ * that can be found in the LICENSE file in the root of the source
+ * tree. An additional intellectual property rights grant can be found
+ * in the file PATENTS. All contributing project authors may
+ * be found in the AUTHORS file in the root of the source tree.
+ */
+
+#include <limits.h>
+#include <math.h>
+
+#include "vp9/encoder/vp9_aq_cyclicrefresh.h"
+
+#include "vp9/common/vp9_seg_common.h"
+
+#include "vp9/encoder/vp9_ratectrl.h"
+#include "vp9/encoder/vp9_rdopt.h"
+#include "vp9/encoder/vp9_segmentation.h"
+
+
+// Check if we should turn off cyclic refresh based on bitrate condition.
+static int apply_cyclic_refresh_bitrate(VP9_COMP *const cpi) {+ // Turn off cyclic refresh if bits available per frame is not sufficiently
+ // larger than bit cost of segmentation. Segment map bit cost should scale
+ // with number of seg blocks, so compare available bits to number of blocks.
+ // Average bits available per frame = av_per_frame_bandwidth
+ // Number of (8x8) blocks in frame = mi_rows * mi_cols;
+ float factor = 0.5;
+ int number_blocks = cpi->common.mi_rows * cpi->common.mi_cols;
+ // The condition below corresponds to turning off at target bitrates:
+ // ~24kbps for CIF, 72kbps for VGA (at 30fps).
+ if (cpi->rc.av_per_frame_bandwidth < factor * number_blocks)
+ return 0;
+ else
+ return 1;
+}
+
+// Check if this coding block, of size bsize, should be considered for refresh
+// (lower-qp coding). Decision can be based on various factors, such as
+// size of the coding block (i.e., below min_block size rejected), coding
+// mode, and rate/distortion.
+static int candidate_refresh_aq(VP9_COMP *const cpi,
+ MODE_INFO *const mi,
+ int bsize,
+ int use_rd) {+ CYCLIC_REFRESH *const cr = &cpi->cyclic_refresh;
+ if (use_rd) {+ // If projected rate is below the thresh_rate (well below target,
+ // so undershoot expected), accept it for lower-qp coding.
+ if (cr->projected_rate_sb < cr->thresh_rate_sb)
+ return 1;
+ // Otherwise, reject the block for lower-qp coding if any of the following:
+ // 1) prediction block size is below min_block_size
+ // 2) mode is non-zero mv and projected distortion is above thresh_dist
+ // 3) mode is an intra-mode (we may want to allow some of this under
+ // another thresh_dist)
+ else if ((bsize < cr->min_block_size) ||
+ (mi->mbmi.mv[0].as_int != 0 &&
+ cr->projected_dist_sb > cr->thresh_dist_sb) ||
+ !is_inter_block(&mi->mbmi))
+ return 0;
+ else
+ return 1;
+ } else {+ // Rate/distortion not used for update.
+ if ((bsize < cr->min_block_size) ||
+ (mi->mbmi.mv[0].as_int != 0) ||
+ !is_inter_block(&mi->mbmi))
+ return 0;
+ else
+ return 1;
+ }
+}
+
+// Prior to coding a given prediction block, of size bsize at (mi_row, mi_col),
+// check if we should reset the segment_id, and update the cyclic_refresh map
+// and segmentation map.
+void vp9_update_segment_aq(VP9_COMP *const cpi,
+ MODE_INFO *const mi,
+ int mi_row,
+ int mi_col,
+ int bsize,
+ int use_rd) {+ CYCLIC_REFRESH *const cr = &cpi->cyclic_refresh;
+ VP9_COMMON *const cm = &cpi->common;
+ const int bw = num_8x8_blocks_wide_lookup[bsize];
+ const int bh = num_8x8_blocks_high_lookup[bsize];
+ const int xmis = MIN(cm->mi_cols - mi_col, bw);
+ const int ymis = MIN(cm->mi_rows - mi_row, bh);
+ const int block_index = mi_row * cm->mi_cols + mi_col;
+ // Default is to not update the refresh map.
+ int new_map_value = cr->map[block_index];
+ int x = 0; int y = 0;
+ int current_segment = mi->mbmi.segment_id;
+ int refresh_this_block = candidate_refresh_aq(cpi, mi, bsize, use_rd);
+ // Check if we should reset the segment_id for this block.
+ if (current_segment && !refresh_this_block)
+ mi->mbmi.segment_id = 0;
+
+ // Update the cyclic refresh map, to be used for setting segmentation map
+ // for the next frame. If the block will be refreshed this frame, mark it
+ // as clean. The magnitude of the -ve influences how long before we consider
+ // it for refresh again.
+ if (mi->mbmi.segment_id == 1) {+ new_map_value = -cr->time_for_refresh;
+ } else if (refresh_this_block) {+ // Else if it is accepted as candidate for refresh, and has not already
+ // been refreshed (marked as 1) then mark it as a candidate for cleanup
+ // for future time (marked as 0), otherwise don't update it.
+ if (cr->map[block_index] == 1)
+ new_map_value = 0;
+ } else {+ // Leave it marked as block that is not candidate for refresh.
+ new_map_value = 1;
+ }
+ // Update entries in the cyclic refresh map with new_map_value, and
+ // copy mbmi->segment_id into global segmentation map.
+ for (y = 0; y < ymis; y++)
+ for (x = 0; x < xmis; x++) {+ cr->map[block_index + y * cm->mi_cols + x] = new_map_value;
+ cpi->segmentation_map[block_index + y * cm->mi_cols + x] =
+ mi->mbmi.segment_id;
+ }
+ // Keep track of actual number (in units of 8x8) of blocks in segment 1 used
+ // for encoding this frame.
+ if (mi->mbmi.segment_id)
+ cr->num_seg_blocks += xmis * ymis;
+}
+
+// Setup cyclic background refresh: set delta q and segmentation map.
+void vp9_setup_cyclic_refresh_aq(VP9_COMP *const cpi) {+ VP9_COMMON *const cm = &cpi->common;
+ CYCLIC_REFRESH *const cr = &cpi->cyclic_refresh;
+ struct segmentation *const seg = &cm->seg;
+ unsigned char *seg_map = cpi->segmentation_map;
+ int apply_cyclic_refresh = apply_cyclic_refresh_bitrate(cpi);
+ // Don't apply refresh on key frame or enhancement layer frames.
+ if (!apply_cyclic_refresh ||
+ (cpi->common.frame_type == KEY_FRAME) ||
+ (cpi->svc.temporal_layer_id > 0)) {+ // Set segmentation map to 0 and disable.
+ vpx_memset(seg_map, 0, cm->mi_rows * cm->mi_cols);
+ vp9_disable_segmentation(&cm->seg);
+ if (cpi->common.frame_type == KEY_FRAME)
+ cr->mb_index = 0;
+ return;
+ } else {+ int qindex_delta = 0;
+ int mbs_in_frame = cm->mi_rows * cm->mi_cols;
+ int i, x, y, block_count, bl_index, bl_index2;
+ int sum_map, new_value, mi_row, mi_col, xmis, ymis, qindex2;
+
+ // Rate target ratio to set q delta.
+ float rate_ratio_qdelta = 2.0;
+ vp9_clear_system_state();
+ // Some of these parameters may be set via codec-control function later.
+ cr->max_mbs_perframe = 10;
+ cr->max_qdelta_perc = 50;
+ cr->min_block_size = BLOCK_16X16;
+ cr->time_for_refresh = 1;
+ // Set rate threshold to some fraction of target (and scaled by 256).
+ cr->thresh_rate_sb = (cpi->rc.sb64_target_rate * 256) >> 2;
+ // Distortion threshold, quadratic in Q, scale factor to be adjusted.
+ cr->thresh_dist_sb = 8 * (int)(vp9_convert_qindex_to_q(cm->base_qindex) *
+ vp9_convert_qindex_to_q(cm->base_qindex));
+ if (cpi->sf.use_nonrd_pick_mode) {+ // May want to be more conservative with thresholds in non-rd mode for now
+ // as rate/distortion are derived from model based on prediction residual.
+ cr->thresh_rate_sb = (cpi->rc.sb64_target_rate * 256) >> 3;
+ cr->thresh_dist_sb = 4 * (int)(vp9_convert_qindex_to_q(cm->base_qindex) *
+ vp9_convert_qindex_to_q(cm->base_qindex));
+ }
+
+ cr->num_seg_blocks = 0;
+ // Set up segmentation.
+ // Clear down the segment map.
+ vpx_memset(seg_map, 0, cm->mi_rows * cm->mi_cols);
+ vp9_enable_segmentation(&cm->seg);
+ vp9_clearall_segfeatures(seg);
+ // Select delta coding method.
+ seg->abs_delta = SEGMENT_DELTADATA;
+
+ // Note: setting temporal_update has no effect, as the seg-map coding method
+ // (temporal or spatial) is determined in vp9_choose_segmap_coding_method(),
+ // based on the coding cost of each method. For error_resilient mode on the
+ // last_frame_seg_map is set to 0, so if temporal coding is used, it is
+ // relative to 0 previous map.
+ // seg->temporal_update = 0;
+
+ // Segment 0 "Q" feature is disabled so it defaults to the baseline Q.
+ vp9_disable_segfeature(seg, 0, SEG_LVL_ALT_Q);
+ // Use segment 1 for in-frame Q adjustment.
+ vp9_enable_segfeature(seg, 1, SEG_LVL_ALT_Q);
+
+ // Set the q delta for segment 1.
+ qindex_delta = vp9_compute_qdelta_by_rate(cpi,
+ cm->base_qindex,
+ rate_ratio_qdelta);
+ // TODO(marpan): Incorporate the actual-vs-target rate over/undershoot from
+ // previous encoded frame.
+ if ((-qindex_delta) > cr->max_qdelta_perc * cm->base_qindex / 100) {+ qindex_delta = -cr->max_qdelta_perc * cm->base_qindex / 100;
+ }
+
+ // Compute rd-mult for segment 1.
+ qindex2 = clamp(cm->base_qindex + cm->y_dc_delta_q + qindex_delta, 0, MAXQ);
+ cr->rdmult = vp9_compute_rd_mult(cpi, qindex2);
+
+ vp9_set_segdata(seg, 1, SEG_LVL_ALT_Q, qindex_delta);
+ // Number of target macroblocks to get the q delta (segment 1).
+ block_count = cr->max_mbs_perframe * mbs_in_frame / 100;
+ // Set the segmentation map: cycle through the macroblocks, starting at
+ // cr->mb_index, and stopping when either block_count blocks have been found
+ // to be refreshed, or we have passed through whole frame.
+ // Note the setting of seg_map below is done in two steps (one over 8x8)
+ // and then another over SB, in order to keep the value constant over SB.
+ // TODO(marpan): Do this in one pass in SB order.
+ assert(cr->mb_index < mbs_in_frame);
+ i = cr->mb_index;
+ do {+ // If the macroblock is as a candidate for clean up then mark it
+ // for possible boost/refresh (segment 1). The segment id may get reset to
+ // 0 later if the macroblock gets coded anything other than ZEROMV.
+ if (cr->map[i] == 0) {+ seg_map[i] = 1;
+ block_count--;
+ } else if (cr->map[i] < 0) {+ cr->map[i]++;
+ }
+ i++;
+ if (i == mbs_in_frame) {+ i = 0;
+ }
+ } while (block_count && i != cr->mb_index);
+ cr->mb_index = i;
+ // Enforce constant segment map over superblock.
+ for (mi_row = 0; mi_row < cm->mi_rows; mi_row += MI_BLOCK_SIZE)
+ for (mi_col = 0; mi_col < cm->mi_cols; mi_col += MI_BLOCK_SIZE) {+ bl_index = mi_row * cm->mi_cols + mi_col;
+ xmis = num_8x8_blocks_wide_lookup[BLOCK_64X64];
+ ymis = num_8x8_blocks_high_lookup[BLOCK_64X64];
+ xmis = MIN(cm->mi_cols - mi_col, xmis);
+ ymis = MIN(cm->mi_rows - mi_row, ymis);
+ sum_map = 0;
+ for (y = 0; y < ymis; y++)
+ for (x = 0; x < xmis; x++) {+ bl_index2 = bl_index + y * cm->mi_cols + x;
+ sum_map += seg_map[bl_index2];
+ }
+ new_value = 0;
+ // If segment is partial over superblock, reset.
+ if (sum_map > 0 && sum_map < xmis * ymis) {+ if (sum_map < xmis * ymis / 2)
+ new_value = 0;
+ else
+ new_value = 1;
+ for (y = 0; y < ymis; y++)
+ for (x = 0; x < xmis; x++) {+ bl_index2 = bl_index + y * cm->mi_cols + x;
+ seg_map[bl_index2] = new_value;
+ }
+ }
+ }
+ }
+}
--- /dev/null
+++ b/vp9/encoder/vp9_aq_cyclicrefresh.h
@@ -1,0 +1,67 @@
+/*
+ * Copyright (c) 2014 The WebM project authors. All Rights Reserved.
+ *
+ * Use of this source code is governed by a BSD-style license
+ * that can be found in the LICENSE file in the root of the source
+ * tree. An additional intellectual property rights grant can be found
+ * in the file PATENTS. All contributing project authors may
+ * be found in the AUTHORS file in the root of the source tree.
+ */
+
+
+#ifndef VP9_ENCODER_VP9_AQ_CYCLICREFRESH_H_
+#define VP9_ENCODER_VP9_AQ_CYCLICREFRESH_H_
+
+#include "vp9/common/vp9_blockd.h"
+
+#ifdef __cplusplus
+extern "C" {+#endif
+
+typedef struct {+ // Target percentage of blocks per frame that are cyclicly refreshed.
+ int max_mbs_perframe;
+ // Maximum q-delta as percentage of base q.
+ int max_qdelta_perc;
+ // Block size below which we don't apply cyclic refresh.
+ BLOCK_SIZE min_block_size;
+ // Macroblock starting index (unit of 8x8) for cycling through the frame.
+ int mb_index;
+ // Controls how long a block will need to wait to be refreshed again.
+ int time_for_refresh;
+ // Actual number of blocks that were applied delta-q (segment 1).
+ int num_seg_blocks;
+ // Actual encoding bits for segment 1.
+ int actual_seg_bits;
+ // RD mult. parameters for segment 1.
+ int rdmult;
+ // Cyclic refresh map.
+ signed char *map;
+ // Projected rate and distortion for the current superblock.
+ int64_t projected_rate_sb;
+ int64_t projected_dist_sb;
+ // Thresholds applied to projected rate/distortion of the superblock.
+ int64_t thresh_rate_sb;
+ int64_t thresh_dist_sb;
+} CYCLIC_REFRESH;
+
+struct VP9_COMP;
+
+// Prior to coding a given prediction block, of size bsize at (mi_row, mi_col),
+// check if we should reset the segment_id, and update the cyclic_refresh map
+// and segmentation map.
+void vp9_update_segment_aq(struct VP9_COMP *const cpi,
+ MODE_INFO *const mi,
+ int mi_row,
+ int mi_col,
+ int bsize,
+ int use_rd);
+
+// Setup cyclic background refresh: set delta q and segmentation map.
+void vp9_setup_cyclic_refresh_aq(struct VP9_COMP *const cpi);
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+#endif // VP9_ENCODER_VP9_AQ_CYCLICREFRESH_H_
--- /dev/null
+++ b/vp9/encoder/vp9_aq_variance.c
@@ -1,0 +1,148 @@
+/*
+ * Copyright (c) 2013 The WebM project authors. All Rights Reserved.
+ *
+ * Use of this source code is governed by a BSD-style license
+ * that can be found in the LICENSE file in the root of the source
+ * tree. An additional intellectual property rights grant can be found
+ * in the file PATENTS. All contributing project authors may
+ * be found in the AUTHORS file in the root of the source tree.
+ */
+
+#include <math.h>
+
+#include "vp9/encoder/vp9_aq_variance.h"
+
+#include "vp9/common/vp9_seg_common.h"
+
+#include "vp9/encoder/vp9_ratectrl.h"
+#include "vp9/encoder/vp9_rdopt.h"
+#include "vp9/encoder/vp9_segmentation.h"
+#include "vp9/common/vp9_systemdependent.h"
+
+#define ENERGY_MIN (-1)
+#define ENERGY_MAX (1)
+#define ENERGY_SPAN (ENERGY_MAX - ENERGY_MIN + 1)
+#define ENERGY_IN_BOUNDS(energy)\
+ assert((energy) >= ENERGY_MIN && (energy) <= ENERGY_MAX)
+
+static double q_ratio[MAX_SEGMENTS] = { 1, 1, 1, 1, 1, 1, 1, 1 };+static double rdmult_ratio[MAX_SEGMENTS] = { 1, 1, 1, 1, 1, 1, 1, 1 };+static int segment_id[MAX_SEGMENTS] = { 5, 3, 1, 0, 2, 4, 6, 7 };+
+#define Q_RATIO(i) q_ratio[(i) - ENERGY_MIN]
+#define RDMULT_RATIO(i) rdmult_ratio[(i) - ENERGY_MIN]
+#define SEGMENT_ID(i) segment_id[(i) - ENERGY_MIN]
+
+DECLARE_ALIGNED(16, static const uint8_t, vp9_64_zeros[64]) = {0};+
+unsigned int vp9_vaq_segment_id(int energy) {+ ENERGY_IN_BOUNDS(energy);
+
+ return SEGMENT_ID(energy);
+}
+
+double vp9_vaq_rdmult_ratio(int energy) {+ ENERGY_IN_BOUNDS(energy);
+
+ vp9_clear_system_state();
+
+ return RDMULT_RATIO(energy);
+}
+
+double vp9_vaq_inv_q_ratio(int energy) {+ ENERGY_IN_BOUNDS(energy);
+
+ vp9_clear_system_state();
+
+ return Q_RATIO(-energy);
+}
+
+void vp9_vaq_init() {+ int i;
+ double base_ratio;
+
+ assert(ENERGY_SPAN <= MAX_SEGMENTS);
+
+ vp9_clear_system_state();
+
+ base_ratio = 1.5;
+
+ for (i = ENERGY_MIN; i <= ENERGY_MAX; i++) {+ Q_RATIO(i) = pow(base_ratio, i/3.0);
+ }
+}
+
+void vp9_vaq_frame_setup(VP9_COMP *cpi) {+ VP9_COMMON *cm = &cpi->common;
+ struct segmentation *seg = &cm->seg;
+ const double base_q = vp9_convert_qindex_to_q(cm->base_qindex);
+ const int base_rdmult = vp9_compute_rd_mult(cpi, cm->base_qindex +
+ cm->y_dc_delta_q);
+ int i;
+
+ if (cm->frame_type == KEY_FRAME ||
+ cpi->refresh_alt_ref_frame ||
+ (cpi->refresh_golden_frame && !cpi->rc.is_src_frame_alt_ref)) {+ vp9_enable_segmentation(seg);
+ vp9_clearall_segfeatures(seg);
+
+ seg->abs_delta = SEGMENT_DELTADATA;
+
+ vp9_clear_system_state();
+
+ for (i = ENERGY_MIN; i <= ENERGY_MAX; i++) {+ int qindex_delta, segment_rdmult;
+
+ if (Q_RATIO(i) == 1) {+ // No need to enable SEG_LVL_ALT_Q for this segment
+ RDMULT_RATIO(i) = 1;
+ continue;
+ }
+
+ qindex_delta = vp9_compute_qdelta(cpi, base_q, base_q * Q_RATIO(i));
+ vp9_set_segdata(seg, SEGMENT_ID(i), SEG_LVL_ALT_Q, qindex_delta);
+ vp9_enable_segfeature(seg, SEGMENT_ID(i), SEG_LVL_ALT_Q);
+
+ segment_rdmult = vp9_compute_rd_mult(cpi, cm->base_qindex + qindex_delta +
+ cm->y_dc_delta_q);
+
+ RDMULT_RATIO(i) = (double) segment_rdmult / base_rdmult;
+ }
+ }
+}
+
+
+static unsigned int block_variance(VP9_COMP *cpi, MACROBLOCK *x,
+ BLOCK_SIZE bs) {+ MACROBLOCKD *xd = &x->e_mbd;
+ unsigned int var, sse;
+ int right_overflow = (xd->mb_to_right_edge < 0) ?
+ ((-xd->mb_to_right_edge) >> 3) : 0;
+ int bottom_overflow = (xd->mb_to_bottom_edge < 0) ?
+ ((-xd->mb_to_bottom_edge) >> 3) : 0;
+
+ if (right_overflow || bottom_overflow) {+ const int bw = 8 * num_8x8_blocks_wide_lookup[bs] - right_overflow;
+ const int bh = 8 * num_8x8_blocks_high_lookup[bs] - bottom_overflow;
+ int avg;
+ variance(x->plane[0].src.buf, x->plane[0].src.stride,
+ vp9_64_zeros, 0, bw, bh, &sse, &avg);
+ var = sse - (((int64_t)avg * avg) / (bw * bh));
+ return (256 * var) / (bw * bh);
+ } else {+ var = cpi->fn_ptr[bs].vf(x->plane[0].src.buf,
+ x->plane[0].src.stride,
+ vp9_64_zeros, 0, &sse);
+ return (256 * var) >> num_pels_log2_lookup[bs];
+ }
+}
+
+int vp9_block_energy(VP9_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs) {+ double energy;
+ unsigned int var = block_variance(cpi, x, bs);
+
+ vp9_clear_system_state();
+
+ energy = 0.9 * (log(var + 1.0) - 10.0);
+ return clamp((int)round(energy), ENERGY_MIN, ENERGY_MAX);
+}
--- /dev/null
+++ b/vp9/encoder/vp9_aq_variance.h
@@ -1,0 +1,34 @@
+/*
+ * Copyright (c) 2013 The WebM project authors. All Rights Reserved.
+ *
+ * Use of this source code is governed by a BSD-style license
+ * that can be found in the LICENSE file in the root of the source
+ * tree. An additional intellectual property rights grant can be found
+ * in the file PATENTS. All contributing project authors may
+ * be found in the AUTHORS file in the root of the source tree.
+ */
+
+
+#ifndef VP9_ENCODER_VP9_AQ_VARIANCE_H_
+#define VP9_ENCODER_VP9_AQ_VARIANCE_H_
+
+#include "vp9/encoder/vp9_onyx_int.h"
+
+#ifdef __cplusplus
+extern "C" {+#endif
+
+unsigned int vp9_vaq_segment_id(int energy);
+double vp9_vaq_rdmult_ratio(int energy);
+double vp9_vaq_inv_q_ratio(int energy);
+
+void vp9_vaq_init();
+void vp9_vaq_frame_setup(VP9_COMP *cpi);
+
+int vp9_block_energy(VP9_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs);
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+#endif // VP9_ENCODER_VP9_AQ_VARIANCE_H_
--- a/vp9/encoder/vp9_craq.c
+++ /dev/null
@@ -1,267 +1,0 @@
-/*
- * Copyright (c) 2014 The WebM project authors. All Rights Reserved.
- *
- * Use of this source code is governed by a BSD-style license
- * that can be found in the LICENSE file in the root of the source
- * tree. An additional intellectual property rights grant can be found
- * in the file PATENTS. All contributing project authors may
- * be found in the AUTHORS file in the root of the source tree.
- */
-
-#include <limits.h>
-#include <math.h>
-
-#include "vp9/encoder/vp9_craq.h"
-
-#include "vp9/common/vp9_seg_common.h"
-
-#include "vp9/encoder/vp9_ratectrl.h"
-#include "vp9/encoder/vp9_rdopt.h"
-#include "vp9/encoder/vp9_segmentation.h"
-
-
-// Check if we should turn off cyclic refresh based on bitrate condition.
-static int apply_cyclic_refresh_bitrate(VP9_COMP *const cpi) {- // Turn off cyclic refresh if bits available per frame is not sufficiently
- // larger than bit cost of segmentation. Segment map bit cost should scale
- // with number of seg blocks, so compare available bits to number of blocks.
- // Average bits available per frame = av_per_frame_bandwidth
- // Number of (8x8) blocks in frame = mi_rows * mi_cols;
- float factor = 0.5;
- int number_blocks = cpi->common.mi_rows * cpi->common.mi_cols;
- // The condition below corresponds to turning off at target bitrates:
- // ~24kbps for CIF, 72kbps for VGA (at 30fps).
- if (cpi->rc.av_per_frame_bandwidth < factor * number_blocks)
- return 0;
- else
- return 1;
-}
-
-// Check if this coding block, of size bsize, should be considered for refresh
-// (lower-qp coding). Decision can be based on various factors, such as
-// size of the coding block (i.e., below min_block size rejected), coding
-// mode, and rate/distortion.
-static int candidate_refresh_aq(VP9_COMP *const cpi,
- MODE_INFO *const mi,
- int bsize,
- int use_rd) {- CYCLIC_REFRESH *const cr = &cpi->cyclic_refresh;
- if (use_rd) {- // If projected rate is below the thresh_rate (well below target,
- // so undershoot expected), accept it for lower-qp coding.
- if (cr->projected_rate_sb < cr->thresh_rate_sb)
- return 1;
- // Otherwise, reject the block for lower-qp coding if any of the following:
- // 1) prediction block size is below min_block_size
- // 2) mode is non-zero mv and projected distortion is above thresh_dist
- // 3) mode is an intra-mode (we may want to allow some of this under
- // another thresh_dist)
- else if ((bsize < cr->min_block_size) ||
- (mi->mbmi.mv[0].as_int != 0 &&
- cr->projected_dist_sb > cr->thresh_dist_sb) ||
- !is_inter_block(&mi->mbmi))
- return 0;
- else
- return 1;
- } else {- // Rate/distortion not used for update.
- if ((bsize < cr->min_block_size) ||
- (mi->mbmi.mv[0].as_int != 0) ||
- !is_inter_block(&mi->mbmi))
- return 0;
- else
- return 1;
- }
-}
-
-// Prior to coding a given prediction block, of size bsize at (mi_row, mi_col),
-// check if we should reset the segment_id, and update the cyclic_refresh map
-// and segmentation map.
-void vp9_update_segment_aq(VP9_COMP *const cpi,
- MODE_INFO *const mi,
- int mi_row,
- int mi_col,
- int bsize,
- int use_rd) {- CYCLIC_REFRESH *const cr = &cpi->cyclic_refresh;
- VP9_COMMON *const cm = &cpi->common;
- const int bw = num_8x8_blocks_wide_lookup[bsize];
- const int bh = num_8x8_blocks_high_lookup[bsize];
- const int xmis = MIN(cm->mi_cols - mi_col, bw);
- const int ymis = MIN(cm->mi_rows - mi_row, bh);
- const int block_index = mi_row * cm->mi_cols + mi_col;
- // Default is to not update the refresh map.
- int new_map_value = cr->map[block_index];
- int x = 0; int y = 0;
- int current_segment = mi->mbmi.segment_id;
- int refresh_this_block = candidate_refresh_aq(cpi, mi, bsize, use_rd);
- // Check if we should reset the segment_id for this block.
- if (current_segment && !refresh_this_block)
- mi->mbmi.segment_id = 0;
-
- // Update the cyclic refresh map, to be used for setting segmentation map
- // for the next frame. If the block will be refreshed this frame, mark it
- // as clean. The magnitude of the -ve influences how long before we consider
- // it for refresh again.
- if (mi->mbmi.segment_id == 1) {- new_map_value = -cr->time_for_refresh;
- } else if (refresh_this_block) {- // Else if it is accepted as candidate for refresh, and has not already
- // been refreshed (marked as 1) then mark it as a candidate for cleanup
- // for future time (marked as 0), otherwise don't update it.
- if (cr->map[block_index] == 1)
- new_map_value = 0;
- } else {- // Leave it marked as block that is not candidate for refresh.
- new_map_value = 1;
- }
- // Update entries in the cyclic refresh map with new_map_value, and
- // copy mbmi->segment_id into global segmentation map.
- for (y = 0; y < ymis; y++)
- for (x = 0; x < xmis; x++) {- cr->map[block_index + y * cm->mi_cols + x] = new_map_value;
- cpi->segmentation_map[block_index + y * cm->mi_cols + x] =
- mi->mbmi.segment_id;
- }
- // Keep track of actual number (in units of 8x8) of blocks in segment 1 used
- // for encoding this frame.
- if (mi->mbmi.segment_id)
- cr->num_seg_blocks += xmis * ymis;
-}
-
-// Setup cyclic background refresh: set delta q and segmentation map.
-void vp9_setup_cyclic_refresh_aq(VP9_COMP *const cpi) {- VP9_COMMON *const cm = &cpi->common;
- CYCLIC_REFRESH *const cr = &cpi->cyclic_refresh;
- struct segmentation *const seg = &cm->seg;
- unsigned char *seg_map = cpi->segmentation_map;
- int apply_cyclic_refresh = apply_cyclic_refresh_bitrate(cpi);
- // Don't apply refresh on key frame or enhancement layer frames.
- if (!apply_cyclic_refresh ||
- (cpi->common.frame_type == KEY_FRAME) ||
- (cpi->svc.temporal_layer_id > 0)) {- // Set segmentation map to 0 and disable.
- vpx_memset(seg_map, 0, cm->mi_rows * cm->mi_cols);
- vp9_disable_segmentation(&cm->seg);
- if (cpi->common.frame_type == KEY_FRAME)
- cr->mb_index = 0;
- return;
- } else {- int qindex_delta = 0;
- int mbs_in_frame = cm->mi_rows * cm->mi_cols;
- int i, x, y, block_count, bl_index, bl_index2;
- int sum_map, new_value, mi_row, mi_col, xmis, ymis, qindex2;
-
- // Rate target ratio to set q delta.
- float rate_ratio_qdelta = 2.0;
- vp9_clear_system_state();
- // Some of these parameters may be set via codec-control function later.
- cr->max_mbs_perframe = 10;
- cr->max_qdelta_perc = 50;
- cr->min_block_size = BLOCK_16X16;
- cr->time_for_refresh = 1;
- // Set rate threshold to some fraction of target (and scaled by 256).
- cr->thresh_rate_sb = (cpi->rc.sb64_target_rate * 256) >> 2;
- // Distortion threshold, quadratic in Q, scale factor to be adjusted.
- cr->thresh_dist_sb = 8 * (int)(vp9_convert_qindex_to_q(cm->base_qindex) *
- vp9_convert_qindex_to_q(cm->base_qindex));
- if (cpi->sf.use_nonrd_pick_mode) {- // May want to be more conservative with thresholds in non-rd mode for now
- // as rate/distortion are derived from model based on prediction residual.
- cr->thresh_rate_sb = (cpi->rc.sb64_target_rate * 256) >> 3;
- cr->thresh_dist_sb = 4 * (int)(vp9_convert_qindex_to_q(cm->base_qindex) *
- vp9_convert_qindex_to_q(cm->base_qindex));
- }
-
- cr->num_seg_blocks = 0;
- // Set up segmentation.
- // Clear down the segment map.
- vpx_memset(seg_map, 0, cm->mi_rows * cm->mi_cols);
- vp9_enable_segmentation(&cm->seg);
- vp9_clearall_segfeatures(seg);
- // Select delta coding method.
- seg->abs_delta = SEGMENT_DELTADATA;
-
- // Note: setting temporal_update has no effect, as the seg-map coding method
- // (temporal or spatial) is determined in vp9_choose_segmap_coding_method(),
- // based on the coding cost of each method. For error_resilient mode on the
- // last_frame_seg_map is set to 0, so if temporal coding is used, it is
- // relative to 0 previous map.
- // seg->temporal_update = 0;
-
- // Segment 0 "Q" feature is disabled so it defaults to the baseline Q.
- vp9_disable_segfeature(seg, 0, SEG_LVL_ALT_Q);
- // Use segment 1 for in-frame Q adjustment.
- vp9_enable_segfeature(seg, 1, SEG_LVL_ALT_Q);
-
- // Set the q delta for segment 1.
- qindex_delta = vp9_compute_qdelta_by_rate(cpi,
- cm->base_qindex,
- rate_ratio_qdelta);
- // TODO(marpan): Incorporate the actual-vs-target rate over/undershoot from
- // previous encoded frame.
- if ((-qindex_delta) > cr->max_qdelta_perc * cm->base_qindex / 100) {- qindex_delta = -cr->max_qdelta_perc * cm->base_qindex / 100;
- }
-
- // Compute rd-mult for segment 1.
- qindex2 = clamp(cm->base_qindex + cm->y_dc_delta_q + qindex_delta, 0, MAXQ);
- cr->rdmult = vp9_compute_rd_mult(cpi, qindex2);
-
- vp9_set_segdata(seg, 1, SEG_LVL_ALT_Q, qindex_delta);
- // Number of target macroblocks to get the q delta (segment 1).
- block_count = cr->max_mbs_perframe * mbs_in_frame / 100;
- // Set the segmentation map: cycle through the macroblocks, starting at
- // cr->mb_index, and stopping when either block_count blocks have been found
- // to be refreshed, or we have passed through whole frame.
- // Note the setting of seg_map below is done in two steps (one over 8x8)
- // and then another over SB, in order to keep the value constant over SB.
- // TODO(marpan): Do this in one pass in SB order.
- assert(cr->mb_index < mbs_in_frame);
- i = cr->mb_index;
- do {- // If the macroblock is as a candidate for clean up then mark it
- // for possible boost/refresh (segment 1). The segment id may get reset to
- // 0 later if the macroblock gets coded anything other than ZEROMV.
- if (cr->map[i] == 0) {- seg_map[i] = 1;
- block_count--;
- } else if (cr->map[i] < 0) {- cr->map[i]++;
- }
- i++;
- if (i == mbs_in_frame) {- i = 0;
- }
- } while (block_count && i != cr->mb_index);
- cr->mb_index = i;
- // Enforce constant segment map over superblock.
- for (mi_row = 0; mi_row < cm->mi_rows; mi_row += MI_BLOCK_SIZE)
- for (mi_col = 0; mi_col < cm->mi_cols; mi_col += MI_BLOCK_SIZE) {- bl_index = mi_row * cm->mi_cols + mi_col;
- xmis = num_8x8_blocks_wide_lookup[BLOCK_64X64];
- ymis = num_8x8_blocks_high_lookup[BLOCK_64X64];
- xmis = MIN(cm->mi_cols - mi_col, xmis);
- ymis = MIN(cm->mi_rows - mi_row, ymis);
- sum_map = 0;
- for (y = 0; y < ymis; y++)
- for (x = 0; x < xmis; x++) {- bl_index2 = bl_index + y * cm->mi_cols + x;
- sum_map += seg_map[bl_index2];
- }
- new_value = 0;
- // If segment is partial over superblock, reset.
- if (sum_map > 0 && sum_map < xmis * ymis) {- if (sum_map < xmis * ymis / 2)
- new_value = 0;
- else
- new_value = 1;
- for (y = 0; y < ymis; y++)
- for (x = 0; x < xmis; x++) {- bl_index2 = bl_index + y * cm->mi_cols + x;
- seg_map[bl_index2] = new_value;
- }
- }
- }
- }
-}
--- a/vp9/encoder/vp9_craq.h
+++ /dev/null
@@ -1,67 +1,0 @@
-/*
- * Copyright (c) 2014 The WebM project authors. All Rights Reserved.
- *
- * Use of this source code is governed by a BSD-style license
- * that can be found in the LICENSE file in the root of the source
- * tree. An additional intellectual property rights grant can be found
- * in the file PATENTS. All contributing project authors may
- * be found in the AUTHORS file in the root of the source tree.
- */
-
-
-#ifndef VP9_ENCODER_VP9_CRAQ_H_
-#define VP9_ENCODER_VP9_CRAQ_H_
-
-#include "vp9/common/vp9_blockd.h"
-
-#ifdef __cplusplus
-extern "C" {-#endif
-
-typedef struct {- // Target percentage of blocks per frame that are cyclicly refreshed.
- int max_mbs_perframe;
- // Maximum q-delta as percentage of base q.
- int max_qdelta_perc;
- // Block size below which we don't apply cyclic refresh.
- BLOCK_SIZE min_block_size;
- // Macroblock starting index (unit of 8x8) for cycling through the frame.
- int mb_index;
- // Controls how long a block will need to wait to be refreshed again.
- int time_for_refresh;
- // Actual number of blocks that were applied delta-q (segment 1).
- int num_seg_blocks;
- // Actual encoding bits for segment 1.
- int actual_seg_bits;
- // RD mult. parameters for segment 1.
- int rdmult;
- // Cyclic refresh map.
- signed char *map;
- // Projected rate and distortion for the current superblock.
- int64_t projected_rate_sb;
- int64_t projected_dist_sb;
- // Thresholds applied to projected rate/distortion of the superblock.
- int64_t thresh_rate_sb;
- int64_t thresh_dist_sb;
-} CYCLIC_REFRESH;
-
-struct VP9_COMP;
-
-// Prior to coding a given prediction block, of size bsize at (mi_row, mi_col),
-// check if we should reset the segment_id, and update the cyclic_refresh map
-// and segmentation map.
-void vp9_update_segment_aq(struct VP9_COMP *const cpi,
- MODE_INFO *const mi,
- int mi_row,
- int mi_col,
- int bsize,
- int use_rd);
-
-// Setup cyclic background refresh: set delta q and segmentation map.
-void vp9_setup_cyclic_refresh_aq(struct VP9_COMP *const cpi);
-
-#ifdef __cplusplus
-} // extern "C"
-#endif
-
-#endif // VP9_ENCODER_VP9_CRAQ_H_
--- a/vp9/encoder/vp9_encodeframe.c
+++ b/vp9/encoder/vp9_encodeframe.c
@@ -30,6 +30,8 @@
#include "vp9/common/vp9_systemdependent.h"
#include "vp9/common/vp9_tile_common.h"
+#include "vp9/encoder/vp9_aq_cyclicrefresh.h"
+#include "vp9/encoder/vp9_aq_variance.h"
#include "vp9/encoder/vp9_encodeframe.h"
#include "vp9/encoder/vp9_encodemb.h"
#include "vp9/encoder/vp9_encodemv.h"
@@ -38,8 +40,6 @@
#include "vp9/encoder/vp9_rdopt.h"
#include "vp9/encoder/vp9_segmentation.h"
#include "vp9/encoder/vp9_tokenize.h"
-#include "vp9/encoder/vp9_vaq.h"
-#include "vp9/encoder/vp9_craq.h"
#define GF_ZEROMV_ZBIN_BOOST 0
#define LF_ZEROMV_ZBIN_BOOST 0
--- a/vp9/encoder/vp9_firstpass.c
+++ b/vp9/encoder/vp9_firstpass.c
@@ -23,6 +23,7 @@
#include "vp9/common/vp9_reconinter.h" // vp9_setup_dst_planes()
#include "vp9/common/vp9_systemdependent.h"
+#include "vp9/encoder/vp9_aq_variance.h"
#include "vp9/encoder/vp9_block.h"
#include "vp9/encoder/vp9_encodeframe.h"
#include "vp9/encoder/vp9_encodemb.h"
@@ -34,7 +35,6 @@
#include "vp9/encoder/vp9_quantize.h"
#include "vp9/encoder/vp9_ratectrl.h"
#include "vp9/encoder/vp9_rdopt.h"
-#include "vp9/encoder/vp9_vaq.h"
#include "vp9/encoder/vp9_variance.h"
#define OUTPUT_FPF 0
--- a/vp9/encoder/vp9_onyx_if.c
+++ b/vp9/encoder/vp9_onyx_if.c
@@ -27,8 +27,9 @@
#include "vp9/common/vp9_systemdependent.h"
#include "vp9/common/vp9_tile_common.h"
+#include "vp9/encoder/vp9_aq_cyclicrefresh.h"
+#include "vp9/encoder/vp9_aq_variance.h"
#include "vp9/encoder/vp9_bitstream.h"
-#include "vp9/encoder/vp9_craq.h"
#include "vp9/encoder/vp9_encodeframe.h"
#include "vp9/encoder/vp9_encodemv.h"
#include "vp9/encoder/vp9_firstpass.h"
@@ -39,7 +40,6 @@
#include "vp9/encoder/vp9_rdopt.h"
#include "vp9/encoder/vp9_segmentation.h"
#include "vp9/encoder/vp9_temporal_filter.h"
-#include "vp9/encoder/vp9_vaq.h"
#include "vp9/encoder/vp9_resize.h"
#include "vp9/encoder/vp9_svc_layercontext.h"
--- a/vp9/encoder/vp9_onyx_int.h
+++ b/vp9/encoder/vp9_onyx_int.h
@@ -23,7 +23,7 @@
#include "vp9/common/vp9_entropymode.h"
#include "vp9/common/vp9_onyxc_int.h"
-#include "vp9/encoder/vp9_craq.h"
+#include "vp9/encoder/vp9_aq_cyclicrefresh.h"
#include "vp9/encoder/vp9_encodemb.h"
#include "vp9/encoder/vp9_firstpass.h"
#include "vp9/encoder/vp9_lookahead.h"
--- a/vp9/encoder/vp9_vaq.c
+++ /dev/null
@@ -1,148 +1,0 @@
-/*
- * Copyright (c) 2013 The WebM project authors. All Rights Reserved.
- *
- * Use of this source code is governed by a BSD-style license
- * that can be found in the LICENSE file in the root of the source
- * tree. An additional intellectual property rights grant can be found
- * in the file PATENTS. All contributing project authors may
- * be found in the AUTHORS file in the root of the source tree.
- */
-
-#include <math.h>
-
-#include "vp9/encoder/vp9_vaq.h"
-
-#include "vp9/common/vp9_seg_common.h"
-
-#include "vp9/encoder/vp9_ratectrl.h"
-#include "vp9/encoder/vp9_rdopt.h"
-#include "vp9/encoder/vp9_segmentation.h"
-#include "vp9/common/vp9_systemdependent.h"
-
-#define ENERGY_MIN (-1)
-#define ENERGY_MAX (1)
-#define ENERGY_SPAN (ENERGY_MAX - ENERGY_MIN + 1)
-#define ENERGY_IN_BOUNDS(energy)\
- assert((energy) >= ENERGY_MIN && (energy) <= ENERGY_MAX)
-
-static double q_ratio[MAX_SEGMENTS] = { 1, 1, 1, 1, 1, 1, 1, 1 };-static double rdmult_ratio[MAX_SEGMENTS] = { 1, 1, 1, 1, 1, 1, 1, 1 };-static int segment_id[MAX_SEGMENTS] = { 5, 3, 1, 0, 2, 4, 6, 7 };-
-#define Q_RATIO(i) q_ratio[(i) - ENERGY_MIN]
-#define RDMULT_RATIO(i) rdmult_ratio[(i) - ENERGY_MIN]
-#define SEGMENT_ID(i) segment_id[(i) - ENERGY_MIN]
-
-DECLARE_ALIGNED(16, static const uint8_t, vp9_64_zeros[64]) = {0};-
-unsigned int vp9_vaq_segment_id(int energy) {- ENERGY_IN_BOUNDS(energy);
-
- return SEGMENT_ID(energy);
-}
-
-double vp9_vaq_rdmult_ratio(int energy) {- ENERGY_IN_BOUNDS(energy);
-
- vp9_clear_system_state();
-
- return RDMULT_RATIO(energy);
-}
-
-double vp9_vaq_inv_q_ratio(int energy) {- ENERGY_IN_BOUNDS(energy);
-
- vp9_clear_system_state();
-
- return Q_RATIO(-energy);
-}
-
-void vp9_vaq_init() {- int i;
- double base_ratio;
-
- assert(ENERGY_SPAN <= MAX_SEGMENTS);
-
- vp9_clear_system_state();
-
- base_ratio = 1.5;
-
- for (i = ENERGY_MIN; i <= ENERGY_MAX; i++) {- Q_RATIO(i) = pow(base_ratio, i/3.0);
- }
-}
-
-void vp9_vaq_frame_setup(VP9_COMP *cpi) {- VP9_COMMON *cm = &cpi->common;
- struct segmentation *seg = &cm->seg;
- const double base_q = vp9_convert_qindex_to_q(cm->base_qindex);
- const int base_rdmult = vp9_compute_rd_mult(cpi, cm->base_qindex +
- cm->y_dc_delta_q);
- int i;
-
- if (cm->frame_type == KEY_FRAME ||
- cpi->refresh_alt_ref_frame ||
- (cpi->refresh_golden_frame && !cpi->rc.is_src_frame_alt_ref)) {- vp9_enable_segmentation(seg);
- vp9_clearall_segfeatures(seg);
-
- seg->abs_delta = SEGMENT_DELTADATA;
-
- vp9_clear_system_state();
-
- for (i = ENERGY_MIN; i <= ENERGY_MAX; i++) {- int qindex_delta, segment_rdmult;
-
- if (Q_RATIO(i) == 1) {- // No need to enable SEG_LVL_ALT_Q for this segment
- RDMULT_RATIO(i) = 1;
- continue;
- }
-
- qindex_delta = vp9_compute_qdelta(cpi, base_q, base_q * Q_RATIO(i));
- vp9_set_segdata(seg, SEGMENT_ID(i), SEG_LVL_ALT_Q, qindex_delta);
- vp9_enable_segfeature(seg, SEGMENT_ID(i), SEG_LVL_ALT_Q);
-
- segment_rdmult = vp9_compute_rd_mult(cpi, cm->base_qindex + qindex_delta +
- cm->y_dc_delta_q);
-
- RDMULT_RATIO(i) = (double) segment_rdmult / base_rdmult;
- }
- }
-}
-
-
-static unsigned int block_variance(VP9_COMP *cpi, MACROBLOCK *x,
- BLOCK_SIZE bs) {- MACROBLOCKD *xd = &x->e_mbd;
- unsigned int var, sse;
- int right_overflow = (xd->mb_to_right_edge < 0) ?
- ((-xd->mb_to_right_edge) >> 3) : 0;
- int bottom_overflow = (xd->mb_to_bottom_edge < 0) ?
- ((-xd->mb_to_bottom_edge) >> 3) : 0;
-
- if (right_overflow || bottom_overflow) {- const int bw = 8 * num_8x8_blocks_wide_lookup[bs] - right_overflow;
- const int bh = 8 * num_8x8_blocks_high_lookup[bs] - bottom_overflow;
- int avg;
- variance(x->plane[0].src.buf, x->plane[0].src.stride,
- vp9_64_zeros, 0, bw, bh, &sse, &avg);
- var = sse - (((int64_t)avg * avg) / (bw * bh));
- return (256 * var) / (bw * bh);
- } else {- var = cpi->fn_ptr[bs].vf(x->plane[0].src.buf,
- x->plane[0].src.stride,
- vp9_64_zeros, 0, &sse);
- return (256 * var) >> num_pels_log2_lookup[bs];
- }
-}
-
-int vp9_block_energy(VP9_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs) {- double energy;
- unsigned int var = block_variance(cpi, x, bs);
-
- vp9_clear_system_state();
-
- energy = 0.9 * (log(var + 1.0) - 10.0);
- return clamp((int)round(energy), ENERGY_MIN, ENERGY_MAX);
-}
--- a/vp9/encoder/vp9_vaq.h
+++ /dev/null
@@ -1,34 +1,0 @@
-/*
- * Copyright (c) 2013 The WebM project authors. All Rights Reserved.
- *
- * Use of this source code is governed by a BSD-style license
- * that can be found in the LICENSE file in the root of the source
- * tree. An additional intellectual property rights grant can be found
- * in the file PATENTS. All contributing project authors may
- * be found in the AUTHORS file in the root of the source tree.
- */
-
-
-#ifndef VP9_ENCODER_VP9_VAQ_H_
-#define VP9_ENCODER_VP9_VAQ_H_
-
-#include "vp9/encoder/vp9_onyx_int.h"
-
-#ifdef __cplusplus
-extern "C" {-#endif
-
-unsigned int vp9_vaq_segment_id(int energy);
-double vp9_vaq_rdmult_ratio(int energy);
-double vp9_vaq_inv_q_ratio(int energy);
-
-void vp9_vaq_init();
-void vp9_vaq_frame_setup(VP9_COMP *cpi);
-
-int vp9_block_energy(VP9_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs);
-
-#ifdef __cplusplus
-} // extern "C"
-#endif
-
-#endif // VP9_ENCODER_VP9_VAQ_H_
--- a/vp9/vp9cx.mk
+++ b/vp9/vp9cx.mk
@@ -68,10 +68,10 @@
VP9_CX_SRCS-yes += encoder/vp9_tokenize.c
VP9_CX_SRCS-yes += encoder/vp9_treewriter.c
VP9_CX_SRCS-yes += encoder/vp9_variance.c
-VP9_CX_SRCS-yes += encoder/vp9_vaq.c
-VP9_CX_SRCS-yes += encoder/vp9_vaq.h
-VP9_CX_SRCS-yes += encoder/vp9_craq.c
-VP9_CX_SRCS-yes += encoder/vp9_craq.h
+VP9_CX_SRCS-yes += encoder/vp9_aq_variance.c
+VP9_CX_SRCS-yes += encoder/vp9_aq_variance.h
+VP9_CX_SRCS-yes += encoder/vp9_aq_cyclicrefresh.c
+VP9_CX_SRCS-yes += encoder/vp9_aq_cyclicrefresh.h
ifeq ($(CONFIG_VP9_POSTPROC),yes)
VP9_CX_SRCS-$(CONFIG_INTERNAL_STATS) += common/vp9_postproc.h
VP9_CX_SRCS-$(CONFIG_INTERNAL_STATS) += common/vp9_postproc.c