ref: 547b21bde31539b21453bfa7a9f8a13b345c7fc5
dir: /README.md/
# faust9p
Tools to compile [Faust](https://faust.grame.fr) DSP code to a 9p
server running on Plan 9.
## Testing
Since Faust isn't(?) ported to Plan 9 (yet?), first you need to
generate some code on some other OS that supports it, by running
`./gen.sh`. As an alternative, do `9fs ftrv.se; ls /n/ftrv.se/faust9p`,
there is a generated file ready.
So far only one instrument provided, which is a kick drum.
```
% ./6.out -m /n/kick
% cd /n/kick
# allocate one instance
% cd `{cat clone}
# check the A oscillator frequency
# the order is: type value initial min max step
# it's different for different UI elements
% cat K*/a/frequency/ctl
vslider 100 100 10 200 5
# raise frequency to 160Hz
% echo 160 > K*/a/f*/ctl
# pipe sound to /dev/audio in background, it should start kicking
% while() { for(i in 16384 16384 32768) { audio/pcmconv -i f32c1r44100 -l $i < data } } > /dev/audio &
# the numbers ar how many bytes of the output should be read
# gate = 1
% echo 1 > K*/control/gate/ctl
# set B oscillator parameters and enable it
% echo 400 > K*/b/frequency/ctl
% echo 0.001 > K*/b/attack/ctl
% echo 1 > K*/control/b*/ctl
```
## Description
A DSP fs presents an interface to create instances of a DSP class by
reading the `clone` file. In the resulting directory `metadata` is
used to read general info about the dsp, `data` is used to supply
input to the DSP (if it has any inputs) by writing to it, and output
can be read from it. The format is raw stream of `float`.
Each DSP instance, in addition to the mentioned files, provides a file
tree that reflects the UI elements. UI elements provide `ctl` file to
read initial and current, maximum and minimum, step, and may be used
to write a new value to it. `metadata` is provided to read/write
UI-specific metadata key/values.
Several DSPs may be connected by chaining their `data` interfaces
together. If some parameters need to be changed dynamically during
processing with frame accuracy, it can be achieved by running the
chain for a chunk of data, changing the parameters, then continuing
processing.
## TODO
* a program to control DSP through an actual UI in rio
* `<ui>/value` to watch the changes, add frame offset as well to know
when it actually changed
* optional frame offsets for all commands, perhaps that's easier than
running and stopping the processing all the time
* `reset` command for groups
* add writable `metadata` for each instance
* allow adding new key/values to `metadata`
* add some way to read and write the whole configuration of an instance
in an easy way, so instances can be cloned, or configs saved to disk
as presets
* make all of that compile and run on Linux as well?