ref: 62b4f5dfdefa2e1bfb962c2d9bbfb3ee9bc16ab8
parent: f22c47ca5dcb2bcd815c63b1b3b595c5665348d4
author: huade <[email protected]>
date: Fri Sep 9 11:26:48 EDT 2016
remove unneed script, MD5 check and simplified the case check logic
--- a/test/encoder_binary_comparison/Scripts/run_BinarySHA1Comparison.sh
+++ b/test/encoder_binary_comparison/Scripts/run_BinarySHA1Comparison.sh
@@ -22,18 +22,13 @@
#usage runGlobalVariableDef
runGlobalVariableDef()
{- WorkingDirDir=""
#test data space
FinalResultPath=""
IssueDataPath=""
TempDataPath=""
#for test sequence info
- TestSequenceName=""
PicW=""
PicH=""
- #test cfg file and test info output file
- ConfigureFile=""
- AllCaseFile=""
#xxx.csv
AllCasePassStatusFile=""
#for encoder command
@@ -40,7 +35,6 @@
declare -a aEncoderCommandSet
declare -a aEncoderCommandName
declare -a aEncoderCommandValue
- declare -a aRecYUVFileList
#encoder parameters change based on the case info
let "EncoderFlag = 0"
CaseInfo=""
@@ -55,7 +49,6 @@
#usage runEncoderCommandInital
runEncoderCommandInital()
{-
aEncoderCommandSet=( -utype -frms -numl -numtl \
-sw -sh "-dw 0" "-dh 0" "-dw 1" "-dh 1" "-dw 2" "-dh 2" "-dw 3" "-dh 3" \
"-frout 0" "-frout 1" "-frout 2" "-frout 3" \
@@ -95,17 +88,12 @@
IssueDataPath="${CurrentDir}/issue"TempDataPath="TempData"
TestSequencePath="${CurrentDir}"- #get YUV detail info $picW $picH $FPS
- declare -a aYUVInfo
- aYUVInfo=(`./run_ParseYUVInfo.sh ${TestSequenceName}`)- PicW=${aYUVInfo[0]}- PicH=${aYUVInfo[1]}- #test cfg file and test info output file
- ConfigureFile=welsenc.cfg
- AllCasePassStatusFile="${FinalResultPath}/${TestSequenceName}_AllCaseOutput.csv"- UnpassCaseFile="${FinalResultPath}/${TestSequenceName}_unpassCaseOutput.csv"- UpdateSHA1TableFile="${FinalResultPath}/${TestSequenceName}_UpdateSHA1Table.csv"+ #test info output file
+ AllCasePassStatusFile="${FinalResultPath}/${TestYUVName}_AllCaseOutput.csv"+ UnpassCaseFile="${FinalResultPath}/${TestYUVName}_unpassCaseOutput.csv"+ UpdateSHA1TableFile="${FinalResultPath}/${TestYUVName}_UpdateSHA1Table.csv"+
HeadLine1="EncoderFlag, DecoderFlag, FPS, BitSreamSHA1, BitSreamMD5, InputYUVSHA1, InputYUVMD5,\
-utype, -frms, -numl, -numtl, -sw, -sh,\
-dw 0, -dh 0, -dw 1, -dh 1, -dw 2, -dh 2, -dw 3, -dh 3,\
@@ -144,13 +132,15 @@
EncoderCommand=""
EncoderLogFile="${TempDataPath}/Encoder.log"TargetSHA1=""
- TargetMD5=""
TargetYUVSHA1=""
- TargetYUVMD5=""
BenchmarkSHA1=""
- BenchmarkMD5=""
BenchmarkYUVSHA1=""
- BenchmarkYUVMD5=""
+
+ RecParam=""
+ for((i=0;i<4;i++))
+ do
+ RecParam="${RecParam} -drec ${i} ${TempDataPath}/${TestYUVName}_rec${i}.yuv"+ done
}
#***********************************************************
#called by runAllCaseTest
@@ -163,76 +153,31 @@
echo "no parameter!"
return 1
fi
- local TempData=""
+
local CaseData=$@
- local BitstreamPrefix=""
BenchmarkSHA1=`echo $CaseData |awk 'BEGIN {FS="[,\r]"} {print $1} ' `- BenchmarkMD5=`echo $CaseData |awk 'BEGIN {FS="[,\r]"} {print $2} ' ` BenchmarkYUVSHA1=`echo $CaseData |awk 'BEGIN {FS="[,\r]"} {print $3} ' `- BenchmarkYUVMD5=`echo $CaseData |awk 'BEGIN {FS="[,\r]"} {print $4} ' `-
-
- declare -a aTempParamIndex=( 6 7 8 9 10 11 12 13 15 16 17 19 20 21 25 26 27 28 31 32 33 34 35 36 )
- TempData=`echo $CaseData |awk 'BEGIN {FS="[,\r]"} {for(i=5;i<=NF;i++) printf(" %s",$i)} ' `- aEncoderCommandValue=(${TempData})- let "TempParamFlag=0"
-
- for((i=0; i<$NumParameter; i++))
- do
- for ParnmIndex in ${aTempParamIndex[@]}- do
- if [ $i -eq ${ParnmIndex} ]- then
- let "TempParamFlag=1"
- fi
- done
-
- if [ ${TempParamFlag} -eq 0 ]- then
- BitstreamPrefix=${BitstreamPrefix}_${aEncoderCommandName[$i]}_${aEncoderCommandValue[$i]}- fi
- let "TempParamFlag=0"
- done
-
- BitstreamTarget=${TempDataPath}/${TestSequenceName}_${BitstreamPrefix}_codec_target.264- echo ""
- echo "BitstreamPrefix is ${BitstreamPrefix}"- echo ""
+ aEncoderCommandValue=(`echo $CaseData |awk 'BEGIN {FS="[,\r]"} {for(i=5;i<=NF;i++) printf(" %s",$i)} ' `)+ BitstreamTarget=${TempDataPath}/${TestYUVName}_codec_target.264}
runEncodeOneCase()
{- local ParamCommand=""
+ EncoderCommand=""
BitStreamFile=${BitstreamTarget}- for ((i=4; i<${NumParameter}; i++))+ for ((i=0; i<${NumParameter}; i++))do
- ParamCommand="${ParamCommand} ${aEncoderCommandSet[$i]} ${aEncoderCommandValue[$i]} "+ EncoderCommand="${EncoderCommand} ${aEncoderCommandSet[$i]} ${aEncoderCommandValue[$i]} "done
- for((i=0;i<4;i++))
- do
- aRecYUVFileList[$i]="${TempDataPath}/${TestYUVName}_rec${i}.yuv"- done
+ EncoderCommand="./h264enc welsenc.cfg -lconfig 0 layer0.cfg -lconfig 1 layer1.cfg -lconfig 2 layer2.cfg -lconfig 3 layer3.cfg \
+ -bf ${BitStreamFile} -org ${TestSequencePath}/${TestYUVName} ${RecParam} ${EncoderCommand}"+ echo -e "\n---------------Encode One Case-------------------------------------------"
+ echo -e "case encode command is : \n ${EncoderCommand} "- ParamCommand="${aEncoderCommandSet[0]} ${aEncoderCommandValue[0]} ${aEncoderCommandSet[1]} ${aEncoderCommandValue[1]} \- ${aEncoderCommandSet[2]} ${aEncoderCommandValue[2]} \- -lconfig 0 layer0.cfg -lconfig 1 layer1.cfg -lconfig 2 layer2.cfg -lconfig 3 layer3.cfg \
- ${aEncoderCommandSet[3]} ${aEncoderCommandValue[3]} \- ${ParamCommand}"- echo ""
- echo "---------------Encode One Case-------------------------------------------"
- echo "case line is :"
- EncoderCommand="./h264enc welsenc.cfg ${ParamCommand} -bf ${BitStreamFile} \- -drec 0 ${aRecYUVFileList[0]} -drec 1 ${aRecYUVFileList[1]} \- -drec 2 ${aRecYUVFileList[2]} -drec 3 ${aRecYUVFileList[3]} \- -org ${TestSequencePath}/${TestSequenceName}"- echo ${EncoderCommand}echo -e "\n\n"
- ./h264enc welsenc.cfg ${ParamCommand} -bf ${BitStreamFile} \- -drec 0 ${aRecYUVFileList[0]} -drec 1 ${aRecYUVFileList[1]} \- -drec 2 ${aRecYUVFileList[2]} -drec 3 ${aRecYUVFileList[3]} \- -org ${TestSequencePath}/${TestSequenceName} 2>${EncoderLogFile}+ ${EncoderCommand} 2>${EncoderLogFile}if [ $? -eq 0 ]
then
let "EncoderFlag=0"
@@ -255,9 +200,8 @@
#usage runJSVMVerify
runBitStreamVerify()
{- echo ""
- echo "******************************************"
- echo "Bit streamSHA1 value comparison.... "
+ echo -e "\n******************************************"
+ echo -e "Bit stream SHA1 value comparison.... "
#*******************************************
TargetSHA1="NULL"
TargetMD5="NULL"
@@ -267,7 +211,7 @@
if [ ${EncoderFlag} -eq 1 ]then
let "UnpassCaseNum++"
- echo "1:unpassed! encoder initial failed or crash!"
+ echo "1:unpassed! encoder initial failed or crash!"
DiffFlag="1:unpassed! encoder initial failed or crash!"
return 1
fi
@@ -275,39 +219,23 @@
if [ ! -s ${BitStreamFile} ]then
let "UnpassCaseNum++"
- echo "2:unpassed! 0 bits--bit stream"
+ echo "2:unpassed! 0 bits--bit stream"
DiffFlag="2:unpassed! 0 bits--bit stream"
return 1
fi
+
#*******************************************
- #*******************************************
- echo ""
- echo "${BitStreamFile}"#SHA1
- TargetSHA1=`openssl sha1 ${BitStreamFile}`- TargetSHA1=`echo ${TargetSHA1} | awk '{print $2}' `- TargetMD5=`openssl md5 ${BitStreamFile}`- TargetMD5=`echo ${TargetMD5} | awk '{print $2}' `-
- TargetYUVSHA1=`openssl sha1 ${TestSequencePath}/${TestSequenceName} `- TargetYUVSHA1=`echo ${TargetYUVSHA1} | awk '{print $2}' `- TargetYUVMD5=`openssl md5 ${TestSequencePath}/${TestSequenceName} `- TargetYUVMD5=`echo ${TargetYUVMD5} | awk '{print $2}' `-
- if [[ "${TargetSHA1}" =~ "${BenchmarkSHA1}" ]]+ TargetSHA1=`openssl sha1 ${BitStreamFile} | awk '{print $2}'`+ TargetYUVSHA1=`openssl sha1 ${TestSequencePath}/${TestYUVName} | awk '{print $2}'`+ if [[ "${TargetSHA1}" =~ "${BenchmarkSHA1}" ]]then
- echo "bitstream pass! SHA1--${TargetSHA1} ----- ${BenchmarkSHA1}"- echo "MD5 info: MD5--${TargetMD5} ----- ${BenchmarkMD5}"- echo "YUV SHA1 info: SHA1--${TargetYUVSHA1} ---- ${BenchmarkYUVSHA1} "- echo "YUV MD5 info: MD5--${TargetYUVMD5} ---- ${BenchmarkYUVMD5}"+ echo "bitstream pass! SHA1--${TargetSHA1} ----- ${BenchmarkSHA1} YUV--SHA1--info: ${TargetYUVSHA1} ---- ${BenchmarkYUVSHA1}"DiffFlag="0:passed!"
let "PassCaseNum++"
return 0
else
- echo "!!! SHA1 string not match: ${TargetSHA1} ----- ${BenchmarkSHA1} "- echo "MD5 info: MD5--${TargetMD5} ----- ${BenchmarkMD5}"- echo "YUV SHA1 info: SHA1--${TargetYUVSHA1} ---- ${BenchmarkYUVSHA1} "- echo "YUV MD5 info: MD5--${TargetYUVMD5} ---- ${BenchmarkYUVMD5}"+ echo "!!! SHA1 string not match: ${TargetSHA1} ----- ${BenchmarkSHA1} YUV--SHA1--info: ${TargetYUVSHA1} ---- ${BenchmarkYUVSHA1}"DiffFlag="3:unpassed!"
let "UnpassCaseNum++"
return 1
@@ -314,7 +242,7 @@
fi
}
-#called by runAllCaseTest
+#called by runAllCaseTest
#delete temp data files and output single case test result to log file
#usage runSingleCasePostAction $CaseData
runSingleCasePostAction()
@@ -326,16 +254,15 @@
fi
local CaseData=$@
CaseInfo=`echo $CaseData | awk 'BEGIN {FS="[,\r]"} {for(i=5;i<=NF;i++) printf(" %s,",$i)} '`- PassStatusInfo="${DiffFlag}, ${TargetSHA1}, ${BenchmarkSHA1}, ${TargetMD5}, ${BenchmarkMD5},\- ${TargetYUVMD5}, ${BenchmarkYUVMD5}, ${TargetYUVSHA1}, ${BenchmarkYUVSHA1},\- ${CaseInfo}, ${EncoderCommand} "+ PassStatusInfo="${DiffFlag}, ${TargetSHA1}, ${BenchmarkSHA1}, ${TargetYUVSHA1}, ${BenchmarkYUVSHA1}, ${CaseInfo}, ${EncoderCommand} " echo "${PassStatusInfo}">>${AllCasePassStatusFile}if [ "$DiffFlag" != "0:passed!" ]
then
echo "${PassStatusInfo}">>${UnpassCaseFile}fi
- echo "${TargetSHA1}, ${TargetMD5},${TargetYUVMD5}, ${TargetYUVSHA1},${CaseInfo}">>${UpdateSHA1TableFile}- ./run_SafeDelete.sh ${BitstreamTarget} >>${AllCaseConsoleLogFile}+
+ echo "${TargetSHA1}, ${TargetMD5},${TargetYUVMD5}, ${TargetYUVSHA1},${CaseInfo}">>${UpdateSHA1TableFile}+ #./run_SafeDelete.sh ${BitstreamTarget} >>${AllCaseConsoleLogFile}}
#usage runOutputPassNum
@@ -344,7 +271,7 @@
# output file locate in ../result
echo ""
echo "***********************************************************"
- echo "${TestSequenceName}"+ echo "${TestYUVName}" echo "total case Num is: ${TotalCaseNum}" echo "pass case Num is: ${PassCaseNum}" echo "unpass case Num is: ${UnpassCaseNum}"@@ -376,17 +303,15 @@
then
if [ "$DiffFlag" = "0:passed!" ]
then
- echo -e "\033[32m OK! ${TestSequenceName} Case Index ${TotalCaseNum}:SHA-1(Current--Benchmark): ${TargetSHA1}-----${BenchmarkSHA1} \033[0m"- echo -e "\033[32m ----MD5 (Current--Benchmark): ${TargetMD5}-----${BenchmarkMD5} \033[0m"- echo -e "\033[32m ----YUVMD5: ${TargetYUVMD5}, ${BenchmarkYUVMD5} YUVSHA1: ${TargetYUVSHA1}, ${BenchmarkYUVSHA1} \033[0m"+ echo -e "\033[32m OK! ${TestYUVName} Case Index ${TotalCaseNum}:SHA-1(Current--Benchmark): ${TargetSHA1}-----${BenchmarkSHA1} \033[0m"+ echo -e "\033[32m ----YUVSHA1: ${TargetYUVSHA1}, ${BenchmarkYUVSHA1} \033[0m"fi
fi
#******************************************
if [ ! "$DiffFlag" = "0:passed!" ]
then
- echo -e "\033[31m Failed! ${TestSequenceName} Case Index ${TotalCaseNum}:SHA-1(Current--Benchmark): ${TargetSHA1}-----${BenchmarkSHA1} \033[0m"- echo -e "\033[31m ----MD5 (Current--Benchmark): ${TargetMD5}-----${BenchmarkMD5} \033[0m"- echo -e "\033[31m ----YUVMD5: ${TargetYUVMD5}, ${BenchmarkYUVMD5} YUVSHA1: ${TargetYUVSHA1}, ${BenchmarkYUVSHA1} \033[0m"+ echo -e "\033[31m Failed! ${TestYUVName} Case Index ${TotalCaseNum}:SHA-1(Current--Benchmark): ${TargetSHA1}-----${BenchmarkSHA1} \033[0m"+ echo -e "\033[31m ----YUVSHA1: ${TargetYUVSHA1}, ${BenchmarkYUVSHA1} \033[0m" EncoderLogInfo=`cat ${EncoderLogFile}` echo -e "\033[31m ${EncoderLogInfo} \033[0m"fi
@@ -399,21 +324,11 @@
# usage: runMain $TestYUV $AllCaseFile
runMain()
{- if [ ! $# -eq 2 ]
- then
- echo "usage: run_BinarySHA1Comparison.sh \$TestYUV \$AllCaseFile"
- return 1
- fi
-
runGlobalVariableDef
-
- #for test sequence info
- TestSequenceName=$1
- AllCaseFile=$2
runGlobalVariableInitial
TestFolder=`echo $CurrentDir | awk 'BEGIN {FS="/"} { i=NF; print $i}'`- AllCaseConsoleLogFile="${FinalResultPath}/${TestSequenceName}.TestLog"- CaseSummaryFile="${FinalResultPath}/${TestSequenceName}.Summary"+ AllCaseConsoleLogFile="${FinalResultPath}/${TestYUVName}.TestLog"+ CaseSummaryFile="${FinalResultPath}/${TestYUVName}.Summary"FlagFile=""
#run all cases
@@ -420,7 +335,7 @@
runAllCaseTest
# output file locate in ./result
- echo "${TestSequenceName}, \+ echo "${TestYUVName}, \ ${PassCaseNum} pass!, \ ${UnpassCaseNum} unpass!,\ detail file located in ../AllTestData/${TestFolder}/result">${CaseSummaryFile}@@ -436,7 +351,15 @@
exit 0
fi
}
+#************************************************************************
+# main entry
+#************************************************************************
+if [ ! $# -eq 2 ]
+then
+ echo "usage: run_BinarySHA1Comparison.sh \$TestYUV \$AllCaseFile"
+ return 1
+fi
TestYUVName=$1
AllCaseFile=$2
-runMain ${TestYUVName} ${AllCaseFile}+runMain
--- a/test/encoder_binary_comparison/Scripts/run_BitStreamToYUV.sh
+++ b/test/encoder_binary_comparison/Scripts/run_BitStreamToYUV.sh
@@ -110,7 +110,7 @@
run_BitStream2YUV ${BitStreameFile} ${DecodedYUVName} ${DecoderLogFile}if [ ! $? -eq 0 ]
then
- echo "bit stream decoded failed!"
+ echo "bit stream decoded failed!"
return 1
fi
#*********************
--- a/test/encoder_binary_comparison/run_OneBitStream.sh
+++ b/test/encoder_binary_comparison/run_OneBitStream.sh
@@ -72,9 +72,9 @@
TestYUVName=`echo ${TestYUVName} | awk 'BEGIN {FS="/"} {print $NF} ' ` StreamName=`echo ${StreamFileFullPath} | awk 'BEGIN {FS="/"} {print $NF} ' `echo ""
- echo "TestYUVName is ${TestYUVName}"- echo "StreamName is ${StreamName} "- echo "SHA1Table is ${SHA1Table}"+ echo "TestYUVName is ${TestYUVName}"+ echo "StreamName is ${StreamName}"+ echo "SHA1Table is ${SHA1Table}"echo ""
}
@@ -147,10 +147,10 @@
if [ ${TestType} = "TravisTest" ]then
- if [ -d ${FinalResultDir} ]- then
- ${EncoderTestDir}/Scripts/run_SafeDelete.sh ${FinalResultDir}- fi
+ if [ -d ${FinalResultDir} ]+ then
+ ${EncoderTestDir}/Scripts/run_SafeDelete.sh ${FinalResultDir}+ fi
fi
}