ref: 10a5a6518d709c92df04ce5938d5fedf2c6df685
dir: /extras/romstr.py/
from gbz80disasm import opt_table, end_08_scripts_with, relative_jumps, relative_unconditional_jumps, call_commands
class RomStr(str):
""" Simple wrapper to prevent a giant rom from being shown on screen.
"""
def __repr__(self):
""" Simplifies this object so that the output doesn't overflow stdout.
"""
return "RomStr(too long)"
@classmethod
def load(cls, crystal=True, red=False):
""" Loads a ROM into a RomStr.
"""
if crystal and not red:
file_handler = open("../baserom.gbc", "r")
elif red and not crystal:
file_handler = open("../pokered-baserom.gbc", "r")
else:
raise Exception, "not sure which rom to load?"
bytes = file_handler.read()
file_handler.close()
return RomStr(bytes)
def length(self):
""" len(self)
"""
return len(self)
def len(self):
""" len(self)
"""
return self.length()
def interval(self, offset, length, strings=True, debug=True):
""" returns hex values for the rom starting at offset until
offset+length
"""
returnable = []
for byte in self[offset:offset+length]:
if strings:
returnable.append(hex(ord(byte)))
else:
returnable.append(ord(byte))
return returnable
def until(self, offset, byte, strings=True, debug=False):
""" Returns hex values from rom starting at offset until the given
byte.
"""
return self.interval(offset, self.find(chr(byte), offset) - offset, strings=strings)
def to_asm(self, address, end_address=None, size=None, max_size=0x4000, debug=None):
""" Disassembles ASM at some address. This will stop disassembling when
either the end_address or size is met. Also, there's a maximum size
that will be parsed, so that large patches of data aren't parsed as
code.
"""
start_address = address
if start_address == None:
raise Exception, "address must be given"
if debug == None:
if not hasattr(self, "debug"):
debug = False
else:
debug = self.debug
# this is probably a terrible idea.. why am i doing this?
if size != None and max_size < size:
raise Exception, "max_size must be greater than or equal to size"
elif end_address != None and (end_address - start_address) > max_size:
raise Exception, "end_address is out of bounds"
elif end_address != None and size != None:
if (end_address - start_address) >= size:
size = end_address - start_address
else:
end_address = start_address + size
elif end_address == None and size != None:
end_address = start_address + size
elif end_address != None and size == None:
size = end_address - start_address
return Asm(start_address=start_address, end_address=end_address, size=size, max_size=max_size, debug=debug, rom=self)
class Asm:
""" z80 disassembler
"""
def __init__(self, start_address=None, end_address=None, size=None, max_size=0x4000, debug=True, rom=None):
assert start_address != None, "start_address must be given"
if rom == None:
file_handler = open("../baserom.gbc", "r")
bytes = file_handler.read()
file_handler.close()
rom = RomStr(bytes)
if debug not in [None, True, False]:
raise Exception, "debug param is invalid"
if debug == None:
debug = False
# get end_address and size in sync with each other
if end_address == None and size != None:
end_address = start_address + size
elif end_address != None and size == None:
size = end_address - start_address
elif end_address != None and size != None:
size = max(end_address - start_address, size)
end_address = start_address + size
# check that the bounds make sense
if end_address != None:
if end_address <= start_address:
raise Exception, "end_address is out of bounds"
elif (end_address - start_address) > max_size:
raise Exception, "end_address goes beyond max_size"
# check more edge cases
if not start_address >= 0:
raise Exception, "start_address must be at least 0"
elif not end_address >= 0:
raise Exception, "end_address must be at least 0"
self.rom = rom
self.start_address = start_address
self.end_address = end_address
self.size = size
self.max_size = max_size
self.debug = debug
self.parse()
def parse(self):
""" Disassembles stuff and things.
"""
rom = self.rom
start_address = self.start_address
end_address = self.end_address
max_size = self.max_size
debug = self.debug
bank_id = start_address / 0x4000
# [{"command": 0x20, "bytes": [0x20, 0x40, 0x50],
# "asm": "jp $5040", "label": "Unknown5040"}]
asm_commands = {}
offset = start_address
last_hl_address = None
last_a_address = None
used_3d97 = False
keep_reading = True
while offset <= end_address and keep_reading:
# read the current opcode byte
current_byte = ord(rom[offset])
current_byte_number = len(asm_commands.keys())
# setup this next/upcoming command
asm_command = {
"address": offset,
# This counts how many times relative jumps reference this
# byte. This is used to determine whether or not to print out a
# label later.
"references": 0,
}
# some commands have two opcodes
next_byte = ord(rom[offset+1])
# all two-byte opcodes also have their first byte in there somewhere
if current_byte in opt_table.keys():
# this might be a two-byte opcode
possible_opcode = current_byte + (next_byte << 8)
# check if this is a two-byte opcode
if possible_opcode in opt_table.keys():
op_code = possible_opcode
else:
op_code = current_byte
op = opt_table[op_code]
opstr = op[0].lower()
optype = op[1]
asm_command["type"] = "op"
asm_command["id"] = op_code
asm_command["format"] = opstr
asm_command["opnumberthing"] = optype
if "x" in opstr:
for x in range(0, opstr.count("x")):
insertion = ord(rom[offset + 1])
insertion = "$" + hex(insertion)[2:]
opstr = opstr[:opstr.find("x")].lower() + insertion + opstr[opstr.find("x")+1:].lower()
current_byte_number += 1
offset += 1
if "?" in opstr:
for y in range(0, opstr.count("?")):
byte1 = ord(rom[offset + 1])
byte2 = ord(rom[offset + 2])
number = byte1
number += byte2 << 8;
insertion = "$%.4x" % (number)
opstr = opstr[:opstr.find("?")].lower() + insertion + opstr[opstr.find("?")+1:].lower()
current_byte_number += 2
offset += 2
# Check for relative jumps, construct the formatted asm line.
# Also set the usage of labels.
if current_byte in [0x18, 0x20] or current_byte in relative_jumps: # jr or jr nz
# generate a label for the byte we're jumping to
target_address = offset + 2 + c_int8(ord(rom[offset + 1])).value
if target_address in byte_labels.keys():
byte_labels[target_address]["usage"] = 1 + byte_labels[target_address]["usage"]
line_label2 = byte_labels[target_address]["name"]
else:
line_label2 = asm_label(target_address)
byte_labels[target_address] = {}
byte_labels[target_address]["name"] = line_label2
byte_labels[target_address]["usage"] = 1
byte_labels[target_address]["definition"] = False
insertion = line_label2.lower()
include_comment = True
elif current_byte == 0x3e:
last_a_address = ord(rom[offset + 1])
# store the formatted string for the output later
asm_command["formatted"] = opstr
if current_byte == 0x21:
last_hl_address = byte1 + (byte2 << 8)
# this is leftover from pokered, might be meaningless
if current_byte == 0xcd:
if number == 0x3d97:
used_3d97 = True
if current_byte == 0xc3 or current_byte in relative_unconditional_jumps:
if current_byte == 0xc3:
if number == 0x3d97:
used_3d97 = True
if not has_outstanding_labels(byte_labels) or all_outstanding_labels_are_reverse(byte_labels, offset):
keep_reading = False
break
# stop reading at a jump, relative jump or return
if current_byte in end_08_scripts_with:
is_data = False
if not has_outstanding_labels(byte_labels) and all_outstanding_labels_are_reverse(byte_labels, offset):
keep_reading = False
break
else:
keep_reading = True
else:
keep_reading = True
else:
# This shouldn't really happen, and means that this area of the
# ROM probably doesn't represent instructions.
asm_command["type"] = "data" # db
asm_command["value"] = current_byte
# save this new command in the list
asm_commands[current_byte_number] = asm_command
def __str__(self):
""" ASM pretty printer.
"""
raise NotImplementedError, "zzzzzz"
class AsmList(list):
""" Simple wrapper to prevent all asm lines from being shown on screen.
"""
def length(self):
""" len(self)
"""
return len(self)
def __repr__(self):
""" Simplifies this object so that the output doesn't overflow stdout.
"""
return "AsmList(too long)"