ref: 03852d94083a33e0b10762c2225f2015f23c49d5
dir: /sys/src/cmd/gs/jpeg/jerror.c/
/*
* jerror.c
*
* Copyright (C) 1991-1998, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains simple error-reporting and trace-message routines.
* These are suitable for Unix-like systems and others where writing to
* stderr is the right thing to do. Many applications will want to replace
* some or all of these routines.
*
* If you define USE_WINDOWS_MESSAGEBOX in jconfig.h or in the makefile,
* you get a Windows-specific hack to display error messages in a dialog box.
* It ain't much, but it beats dropping error messages into the bit bucket,
* which is what happens to output to stderr under most Windows C compilers.
*
* These routines are used by both the compression and decompression code.
*/
/* this is not a core library module, so it doesn't define JPEG_INTERNALS */
#include "jinclude.h"
#include "jpeglib.h"
#include "jversion.h"
#include "jerror.h"
#ifdef USE_WINDOWS_MESSAGEBOX
#include <windows.h>
#endif
#ifndef EXIT_FAILURE /* define exit() codes if not provided */
#define EXIT_FAILURE 1
#endif
/*
* Create the message string table.
* We do this from the master message list in jerror.h by re-reading
* jerror.h with a suitable definition for macro JMESSAGE.
* The message table is made an external symbol just in case any applications
* want to refer to it directly.
*/
#ifdef NEED_SHORT_EXTERNAL_NAMES
#define jpeg_std_message_table jMsgTable
#endif
#define JMESSAGE(code,string) string ,
const char * const jpeg_std_message_table[] = {
#include "jerror.h"
NULL
};
/*
* Error exit handler: must not return to caller.
*
* Applications may override this if they want to get control back after
* an error. Typically one would longjmp somewhere instead of exiting.
* The setjmp buffer can be made a private field within an expanded error
* handler object. Note that the info needed to generate an error message
* is stored in the error object, so you can generate the message now or
* later, at your convenience.
* You should make sure that the JPEG object is cleaned up (with jpeg_abort
* or jpeg_destroy) at some point.
*/
METHODDEF(void)
error_exit (j_common_ptr cinfo)
{
/* Always display the message */
(*cinfo->err->output_message) (cinfo);
/* Let the memory manager delete any temp files before we die */
jpeg_destroy(cinfo);
exit(EXIT_FAILURE);
}
/*
* Actual output of an error or trace message.
* Applications may override this method to send JPEG messages somewhere
* other than stderr.
*
* On Windows, printing to stderr is generally completely useless,
* so we provide optional code to produce an error-dialog popup.
* Most Windows applications will still prefer to override this routine,
* but if they don't, it'll do something at least marginally useful.
*
* NOTE: to use the library in an environment that doesn't support the
* C stdio library, you may have to delete the call to fprintf() entirely,
* not just not use this routine.
*/
METHODDEF(void)
output_message (j_common_ptr cinfo)
{
char buffer[JMSG_LENGTH_MAX];
/* Create the message */
(*cinfo->err->format_message) (cinfo, buffer);
#ifdef USE_WINDOWS_MESSAGEBOX
/* Display it in a message dialog box */
MessageBox(GetActiveWindow(), buffer, "JPEG Library Error",
MB_OK | MB_ICONERROR);
#else
/* Send it to stderr, adding a newline */
fprintf(stderr, "%s\n", buffer);
#endif
}
/*
* Decide whether to emit a trace or warning message.
* msg_level is one of:
* -1: recoverable corrupt-data warning, may want to abort.
* 0: important advisory messages (always display to user).
* 1: first level of tracing detail.
* 2,3,...: successively more detailed tracing messages.
* An application might override this method if it wanted to abort on warnings
* or change the policy about which messages to display.
*/
METHODDEF(void)
emit_message (j_common_ptr cinfo, int msg_level)
{
struct jpeg_error_mgr * err = cinfo->err;
if (msg_level < 0) {
/* It's a warning message. Since corrupt files may generate many warnings,
* the policy implemented here is to show only the first warning,
* unless trace_level >= 3.
*/
if (err->num_warnings == 0 || err->trace_level >= 3)
(*err->output_message) (cinfo);
/* Always count warnings in num_warnings. */
err->num_warnings++;
} else {
/* It's a trace message. Show it if trace_level >= msg_level. */
if (err->trace_level >= msg_level)
(*err->output_message) (cinfo);
}
}
/*
* Format a message string for the most recent JPEG error or message.
* The message is stored into buffer, which should be at least JMSG_LENGTH_MAX
* characters. Note that no '\n' character is added to the string.
* Few applications should need to override this method.
*/
METHODDEF(void)
format_message (j_common_ptr cinfo, char * buffer)
{
struct jpeg_error_mgr * err = cinfo->err;
int msg_code = err->msg_code;
const char * msgtext = NULL;
const char * msgptr;
char ch;
boolean isstring;
/* Look up message string in proper table */
if (msg_code > 0 && msg_code <= err->last_jpeg_message) {
msgtext = err->jpeg_message_table[msg_code];
} else if (err->addon_message_table != NULL &&
msg_code >= err->first_addon_message &&
msg_code <= err->last_addon_message) {
msgtext = err->addon_message_table[msg_code - err->first_addon_message];
}
/* Defend against bogus message number */
if (msgtext == NULL) {
err->msg_parm.i[0] = msg_code;
msgtext = err->jpeg_message_table[0];
}
/* Check for string parameter, as indicated by %s in the message text */
isstring = FALSE;
msgptr = msgtext;
while ((ch = *msgptr++) != '\0') {
if (ch == '%') {
if (*msgptr == 's') isstring = TRUE;
break;
}
}
/* Format the message into the passed buffer */
if (isstring)
sprintf(buffer, msgtext, err->msg_parm.s);
else
sprintf(buffer, msgtext,
err->msg_parm.i[0], err->msg_parm.i[1],
err->msg_parm.i[2], err->msg_parm.i[3],
err->msg_parm.i[4], err->msg_parm.i[5],
err->msg_parm.i[6], err->msg_parm.i[7]);
}
/*
* Reset error state variables at start of a new image.
* This is called during compression startup to reset trace/error
* processing to default state, without losing any application-specific
* method pointers. An application might possibly want to override
* this method if it has additional error processing state.
*/
METHODDEF(void)
reset_error_mgr (j_common_ptr cinfo)
{
cinfo->err->num_warnings = 0;
/* trace_level is not reset since it is an application-supplied parameter */
cinfo->err->msg_code = 0; /* may be useful as a flag for "no error" */
}
/*
* Fill in the standard error-handling methods in a jpeg_error_mgr object.
* Typical call is:
* struct jpeg_compress_struct cinfo;
* struct jpeg_error_mgr err;
*
* cinfo.err = jpeg_std_error(&err);
* after which the application may override some of the methods.
*/
GLOBAL(struct jpeg_error_mgr *)
jpeg_std_error (struct jpeg_error_mgr * err)
{
err->error_exit = error_exit;
err->emit_message = emit_message;
err->output_message = output_message;
err->format_message = format_message;
err->reset_error_mgr = reset_error_mgr;
err->trace_level = 0; /* default = no tracing */
err->num_warnings = 0; /* no warnings emitted yet */
err->msg_code = 0; /* may be useful as a flag for "no error" */
/* Initialize message table pointers */
err->jpeg_message_table = jpeg_std_message_table;
err->last_jpeg_message = (int) JMSG_LASTMSGCODE - 1;
err->addon_message_table = NULL;
err->first_addon_message = 0; /* for safety */
err->last_addon_message = 0;
return err;
}