ref: 11025d6f4a2c3c7e75010f85c2d3108e602270b7
dir: /sys/src/cmd/gs/src/gdevcfax.c/
/* Copyright (C) 2000 Aladdin Enterprises. All rights reserved.
This software is provided AS-IS with no warranty, either express or
implied.
This software is distributed under license and may not be copied,
modified or distributed except as expressly authorized under the terms
of the license contained in the file LICENSE in this distribution.
For more information about licensing, please refer to
http://www.ghostscript.com/licensing/. For information on
commercial licensing, go to http://www.artifex.com/licensing/ or
contact Artifex Software, Inc., 101 Lucas Valley Road #110,
San Rafael, CA 94903, U.S.A., +1(415)492-9861.
*/
/* $Id: gdevcfax.c,v 1.5 2002/02/21 22:24:51 giles Exp $ */
/* SFF format writer for CAPI fax devices */
#include "gdevprn.h"
#include "strimpl.h"
#include "scfx.h"
#include "gdevfax.h"
/* The device descriptor */
private dev_proc_print_page(cfax_print_page);
private dev_proc_close_device(cfax_prn_close);
/* Define procedures for cfax. For sff multipage documents */
/* a special close procedure is required because sff needs */
/* an additional "end of document" signature after the last */
/* "end page" signature */
private const gx_device_procs gdev_cfax_std_procs =
prn_params_procs(gdev_prn_open, gdev_prn_output_page, cfax_prn_close,
gdev_fax_get_params, gdev_fax_put_params);
const gx_device_fax gs_cfax_device = {
FAX_DEVICE_BODY(gx_device_fax, gdev_cfax_std_procs, "cfax", cfax_print_page)
};
/* ---------------- SFF output ----------------- */
private void
cfax_byte(uint c, FILE * file)
{
fputc(c & 0xff, file);
}
private void
cfax_word(ushort c, FILE * file)
{
cfax_byte(c & 0xff, file);
cfax_byte(c >> 8, file);
}
private void
cfax_dword(ulong c, FILE * file)
{
cfax_byte(c & 0xff, file);
cfax_byte(c >> 8, file);
cfax_byte(c >> 16, file);
cfax_byte(c >> 24, file);
}
private void
cfax_doc_hdr(FILE * file)
{
cfax_byte('S', file);
cfax_byte('f', file);
cfax_byte('f', file);
cfax_byte('f', file);
cfax_byte(1, file);
cfax_byte(0, file);
cfax_word(0, file);
cfax_word(0, file);
cfax_word(20, file);
cfax_dword(0, file);
cfax_dword(0, file);
}
private void
cfax_page_hdr(gx_device_printer * pdev, FILE * file)
{
cfax_byte(254, file);
cfax_byte(16, file);
cfax_byte((pdev->y_pixels_per_inch < 100 ? 0 : 1), file);
cfax_byte(0, file);
cfax_byte(0, file);
cfax_byte(0, file);
cfax_word(pdev->width, file);
cfax_word(pdev->height, file);
cfax_dword(0, file);
cfax_dword(0, file);
}
private void
cfax_doc_end(FILE * file)
{
cfax_byte(254, file);
cfax_byte(0, file);
}
/* Send the page to the printer. */
private int
cfax_stream_print_page_width(gx_device_printer * pdev, FILE * prn_stream,
const stream_template * temp, stream_state * ss,
int width)
{
gs_memory_t *mem = pdev->memory;
int code = 0;
stream_cursor_read r;
stream_cursor_write w;
int in_size = gdev_prn_raster((gx_device *) pdev);
/*
* Because of the width adjustment for fax systems, width may
* be different from (either greater than or less than) pdev->width.
* Allocate a large enough buffer to account for this.
*/
int col_size = (width * pdev->color_info.depth + 7) >> 3;
int max_size = max(in_size, col_size);
int lnum, nbytes, i;
byte *in;
byte *out;
/* If the file is 'nul', don't even do the writes. */
bool nul = !strcmp(pdev->fname, "nul");
/* Initialize the common part of the encoder state. */
ss->template = temp;
ss->memory = mem;
/* Allocate the buffers. */
in = gs_alloc_bytes(mem, temp->min_in_size + max_size + 1,
"cfax_stream_print_page(in)");
#define OUT_SIZE 1000
out = gs_alloc_bytes(mem, OUT_SIZE, "cfax_stream_print_page(out)");
if (in == 0 || out == 0) {
code = gs_note_error(gs_error_VMerror);
goto done;
}
/* Process the image */
for (lnum = 0; lnum < pdev->height; lnum++) {
/* Initialize read and write pointer each time, because they're getting modified */
r.ptr = in - 1;
r.limit = in + col_size;
w.ptr = out - 1;
w.limit = w.ptr + OUT_SIZE;
/* Decoder must encode line for line, so init it for each line */
code = (*temp->init) (ss);
if (code < 0)
return_error(gs_error_limitcheck);
/* Now, get the bits and encode them */
gdev_prn_copy_scan_lines(pdev, lnum, in, in_size);
if (col_size > in_size) {
memset(in + in_size , 0, col_size - in_size);
}
code = (*temp->process) (ss, &r, &w, 1 /* always last line */);
nbytes = w.ptr - out + 1;
if (!nul) {
if (nbytes > 0) {
if (nbytes < 217) {
cfax_byte(nbytes, prn_stream);
for (i = 0; i < nbytes; i++)
cfax_byte(out[i], prn_stream);
} else {
cfax_byte(0, prn_stream);
cfax_word(nbytes, prn_stream);
for (i = 0; i < nbytes; i++)
cfax_byte(out[i], prn_stream);
}
} else {
cfax_byte(218, prn_stream);
}
}
if (temp->release != 0)
(*temp->release) (ss);
}
#undef OUT_SIZE
done:
gs_free_object(mem, out, "cfax_stream_print_page(out)");
gs_free_object(mem, in, "cfax_stream_print_page(in)");
return code;
}
/* Begin a capi fax page. */
private int
cfax_begin_page(gx_device_printer * pdev, FILE * fp, int width)
{
/* Patch the width to reflect fax page width adjustment. */
int save_width = pdev->width;
pdev->width = width;
if (gdev_prn_file_is_new(pdev)) {
cfax_doc_hdr(fp);
}
cfax_page_hdr(pdev, fp);
pdev->width = save_width;
return 0;
}
/* Print an capi fax (sff-encoded) page. */
private int
cfax_print_page(gx_device_printer * pdev, FILE * prn_stream)
{
stream_CFE_state state;
int code;
gdev_fax_init_fax_state(&state, (gx_device_fax *)pdev);
state.EndOfLine = false;
state.EndOfBlock = false;
state.EncodedByteAlign = true;
state.FirstBitLowOrder = true;
state.K = 0;
cfax_begin_page(pdev, prn_stream, state.Columns);
code = cfax_stream_print_page_width(pdev, prn_stream,
&s_CFE_template, (stream_state *) &state, state.Columns);
return code;
}
/* Close an capi fax (sff-encoded) document. */
private int
cfax_prn_close(gx_device * pdev)
{
gx_device_printer * const ppdev = (gx_device_printer *)pdev;
if (ppdev->file != NULL) {
cfax_doc_end(ppdev->file);
}
return gdev_prn_close(pdev);
}