ref: 172dc0005aa16dea8451bf2bcef7f3eb04df2c04
dir: /sys/src/9/pc/vgahiqvideo.c/
#include "u.h" #include "../port/lib.h" #include "mem.h" #include "dat.h" #include "fns.h" #include "io.h" #include "../port/pci.h" #include "../port/error.h" #define Image IMAGE #include <draw.h> #include <memdraw.h> #include <cursor.h> #include "screen.h" enum { Xrx = 0x3D6, /* Configuration Extensions Index */ }; static uchar hiqvideoxi(long port, uchar index) { uchar data; outb(port, index); data = inb(port+1); return data; } static void hiqvideoxo(long port, uchar index, uchar data) { outb(port, index); outb(port+1, data); } static void hiqvideolinear(VGAscr*, int, int) { } static void hiqvideoenable(VGAscr* scr) { Pcidev *p; int vmsize; /* * Only once, can't be disabled for now. */ if(scr->mmio) return; p = scr->pci; if(p == nil || p->vid != 0x102C) return; switch(p->did){ case 0x00C0: /* 69000 HiQVideo */ vmsize = 2*1024*1024; break; case 0x00E0: /* 65550 HiQV32 */ case 0x00E4: /* 65554 HiQV32 */ case 0x00E5: /* 65555 HiQV32 */ switch((hiqvideoxi(Xrx, 0x43)>>1) & 0x03){ default: case 0: vmsize = 1*1024*1024; break; case 1: vmsize = 2*1024*1024; break; } break; default: return; } vgalinearpci(scr); if(scr->paddr) addvgaseg("hiqvideoscreen", scr->paddr, scr->apsize); /* * Find a place for the cursor data in display memory. * Must be on a 4096-byte boundary. * scr->mmio holds the virtual address of the cursor * storage area in the framebuffer region. */ scr->storage = vmsize-4096; scr->mmio = (ulong*)((uchar*)scr->vaddr+scr->storage); } static void hiqvideocurdisable(VGAscr*) { hiqvideoxo(Xrx, 0xA0, 0x10); } static void hiqvideocurload(VGAscr* scr, Cursor* curs) { uchar *p; int x, y; /* * Disable the cursor. */ hiqvideocurdisable(scr); if(scr->mmio == 0) return; p = (uchar*)scr->mmio; for(y = 0; y < 16; y += 2){ *p++ = ~(curs->clr[2*y]|curs->set[2*y]); *p++ = ~(curs->clr[2*y+1]|curs->set[2*y+1]); *p++ = 0xFF; *p++ = 0xFF; *p++ = ~(curs->clr[2*y+2]|curs->set[2*y+2]); *p++ = ~(curs->clr[2*y+3]|curs->set[2*y+3]); *p++ = 0xFF; *p++ = 0xFF; *p++ = curs->set[2*y]; *p++ = curs->set[2*y+1]; *p++ = 0x00; *p++ = 0x00; *p++ = curs->set[2*y+2]; *p++ = curs->set[2*y+3]; *p++ = 0x00; *p++ = 0x00; } while(y < 32){ for(x = 0; x < 64; x += 8) *p++ = 0xFF; for(x = 0; x < 64; x += 8) *p++ = 0x00; y += 2; } /* * Save the cursor hotpoint and enable the cursor. */ scr->offset = curs->offset; hiqvideoxo(Xrx, 0xA0, 0x11); } static int hiqvideocurmove(VGAscr* scr, Point p) { int x, y; if(scr->mmio == 0) return 1; if((x = p.x+scr->offset.x) < 0) x = 0x8000|(-x & 0x07FF); if((y = p.y+scr->offset.y) < 0) y = 0x8000|(-y & 0x07FF); hiqvideoxo(Xrx, 0xA4, x & 0xFF); hiqvideoxo(Xrx, 0xA5, (x>>8) & 0xFF); hiqvideoxo(Xrx, 0xA6, y & 0xFF); hiqvideoxo(Xrx, 0xA7, (y>>8) & 0xFF); return 0; } static void hiqvideocurenable(VGAscr* scr) { uchar xr80; hiqvideoenable(scr); if(scr->mmio == 0) return; /* * Disable the cursor. */ hiqvideocurdisable(scr); /* * Cursor colours. * Can't call setcolor here as cursor is already locked. * When done make sure the cursor enable in Xr80 is set. */ xr80 = hiqvideoxi(Xrx, 0x80); hiqvideoxo(Xrx, 0x80, xr80|0x01); vgao(PaddrW, 0x04); vgao(Pdata, Pwhite); vgao(Pdata, Pwhite); vgao(Pdata, Pwhite); vgao(Pdata, Pblack); vgao(Pdata, Pblack); vgao(Pdata, Pblack); hiqvideoxo(Xrx, 0x80, xr80|0x10); hiqvideoxo(Xrx, 0xA2, (scr->storage>>12)<<4); hiqvideoxo(Xrx, 0xA3, (scr->storage>>16) & 0x3F); /* * Load, locate and enable the 32x32 cursor. * Cursor enable in Xr80 better be set already. */ hiqvideocurload(scr, &cursor); hiqvideocurmove(scr, ZP); hiqvideoxo(Xrx, 0xA0, 0x11); } VGAdev vgahiqvideodev = { "hiqvideo", hiqvideoenable, /* enable */ nil, /* disable */ nil, /* page */ hiqvideolinear, /* linear */ }; VGAcur vgahiqvideocur = { "hiqvideohwgc", hiqvideocurenable, /* enable */ hiqvideocurdisable, /* disable */ hiqvideocurload, /* load */ hiqvideocurmove, /* move */ };