ref: 1889aa50c3727e7c09da16cacfbfecd72860511b
dir: /sys/man/3/loopback/
.TH LOOPBACK 3 .SH NAME loopback \- network link simulation .SH SYNOPSIS .nf .B bind -a #X /net .BI /net/loopback n /[0-1] .BI /net/loopback n /[0-1]/data .BI /net/loopback n /[0-1]/ctl .BI /net/loopback n /[0-1]/status .BI /net/loopback n /[0-1]/stats .fi .SH DESCRIPTION The loopback interface, .BI /net/loopback n\f1, is a directory containing two subdirectories, one for each end of a simulated network link. The number .I n is the device number of the link, permitting multiple links to be used on a single machine. .PP Each directory contains files to control the associated connection, receive and send data, monitor the simulation parameters, and supply statistics. .PP The .B data files for the two directories are cross-connected. Writes to one are divided into packets of at most a certain size, typically 32768 bytes, written to a flow-controlled output queue, transferred across the link, and put into an input queue where it is readable from the other .B data file. .PP Options are set by writing to the .B ctl file for the receiving end of the link, and are reported in the same format by reading .BR status . The following options are supported. .TP .BI delay \ latency\ bytedelay Control the time a packet takes in the link. A packet .B n bytes long takes .I bytedelay .B * .B n nanoseconds to exit the output queue and is available for reading .I latency nanoseconds later. .TP .BI droprate \ n Randomly drop approximately one out of .B n packets. If zero drop no packets. .TP .BR indrop \ [01] Disallow or allow packets to be dropped if the input queue overflows. .TP .BI limit \ n Set the input and output queues to hold at most .I n bytes. .TP .B reset Clear all of the statistics recorded for the link. .PP Reading .B stats returns a list of 4 tagged numbers representing: .EX .ft 1 packets sent to this receiver bytes sent to this receiver packets dropped due to droprate packets dropped due to input queue overflows .EE .SH SOURCE .B /sys/src/9/port/devloopback.c