ref: 1ecdf09aeeb16dd359251e3e698c8ea7798bd285
dir: /sys/src/cmd/gs/jpeg/ltmain.sh/
# ltmain.sh - Provide generalized library-building support services. # NOTE: Changing this file will not affect anything until you rerun ltconfig. # # Copyright (C) 1996-1998 Free Software Foundation, Inc. # Gordon Matzigkeit <[email protected]>, 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # The name of this program. progname=`$echo "$0" | sed 's%^.*/%%'` modename="$progname" # Constants. PROGRAM=ltmain.sh PACKAGE=libtool VERSION=1.2 default_mode= help="Try \`$progname --help' for more information." magic="%%%MAGIC variable%%%" mkdir="mkdir" mv="mv -f" rm="rm -f" # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e s/^X//' sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' # NLS nuisances. # Only set LANG and LC_ALL to C if already set. # These must not be set unconditionally because not all systems understand # e.g. LANG=C (notably SCO). if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi if test "${LANG+set}" = set; then LANG=C; export LANG; fi if test "$LTCONFIG_VERSION" != "$VERSION"; then echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2 echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit 1 fi if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then echo "$modename: not configured to build any kind of library" 1>&2 echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit 1 fi # Global variables. mode=$default_mode nonopt= prev= prevopt= run= show="$echo" show_help= execute_dlfiles= # Parse our command line options once, thoroughly. while test $# -gt 0 do arg="$1" shift case "$arg" in -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; *) optarg= ;; esac # If the previous option needs an argument, assign it. if test -n "$prev"; then case "$prev" in execute_dlfiles) eval "$prev=\"\$$prev \$arg\"" ;; *) eval "$prev=\$arg" ;; esac prev= prevopt= continue fi # Have we seen a non-optional argument yet? case "$arg" in --help) show_help=yes ;; --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION" exit 0 ;; --dry-run | -n) run=: ;; --features) echo "host: $host" if test "$build_libtool_libs" = yes; then echo "enable shared libraries" else echo "disable shared libraries" fi if test "$build_old_libs" = yes; then echo "enable static libraries" else echo "disable static libraries" fi exit 0 ;; --finish) mode="finish" ;; --mode) prevopt="--mode" prev=mode ;; --mode=*) mode="$optarg" ;; --quiet | --silent) show=: ;; -dlopen) prevopt="-dlopen" prev=execute_dlfiles ;; -*) $echo "$modename: unrecognized option \`$arg'" 1>&2 $echo "$help" 1>&2 exit 1 ;; *) nonopt="$arg" break ;; esac done if test -n "$prevopt"; then $echo "$modename: option \`$prevopt' requires an argument" 1>&2 $echo "$help" 1>&2 exit 1 fi if test -z "$show_help"; then # Infer the operation mode. if test -z "$mode"; then case "$nonopt" in *cc | *++ | gcc* | *-gcc*) mode=link for arg do case "$arg" in -c) mode=compile break ;; esac done ;; *db | *dbx) mode=execute ;; *install*|cp|mv) mode=install ;; *rm) mode=uninstall ;; *) # If we have no mode, but dlfiles were specified, then do execute mode. test -n "$execute_dlfiles" && mode=execute # Just use the default operation mode. if test -z "$mode"; then if test -n "$nonopt"; then $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 else $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 fi fi ;; esac fi # Only execute mode is allowed to have -dlopen flags. if test -n "$execute_dlfiles" && test "$mode" != execute; then $echo "$modename: unrecognized option \`-dlopen'" 1>&2 $echo "$help" 1>&2 exit 1 fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$modename --help --mode=$mode' for more information." # These modes are in order of execution frequency so that they run quickly. case "$mode" in # libtool compile mode compile) modename="$modename: compile" # Get the compilation command and the source file. base_compile= lastarg= srcfile="$nonopt" suppress_output= for arg do # Accept any command-line options. case "$arg" in -o) $echo "$modename: you cannot specify the output filename with \`-o'" 1>&2 $echo "$help" 1>&2 exit 1 ;; -static) build_libtool_libs=no build_old_libs=yes continue ;; esac # Accept the current argument as the source file. lastarg="$srcfile" srcfile="$arg" # Aesthetically quote the previous argument. # Backslashify any backslashes, double quotes, and dollar signs. # These are the only characters that are still specially # interpreted inside of double-quoted scrings. lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly in scan # sets, so we specify it separately. case "$lastarg" in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) lastarg="\"$lastarg\"" ;; esac # Add the previous argument to base_compile. if test -z "$base_compile"; then base_compile="$lastarg" else base_compile="$base_compile $lastarg" fi done # Get the name of the library object. libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` # Recognize several different file suffixes. xform='[cCFSfms]' case "$libobj" in *.ada) xform=ada ;; *.adb) xform=adb ;; *.ads) xform=ads ;; *.asm) xform=asm ;; *.c++) xform=c++ ;; *.cc) xform=cc ;; *.cpp) xform=cpp ;; *.cxx) xform=cxx ;; *.f90) xform=f90 ;; *.for) xform=for ;; esac libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` case "$libobj" in *.lo) obj=`$echo "X$libobj" | $Xsed -e 's/\.lo$/.o/'` ;; *) $echo "$modename: cannot determine name of library object from \`$srcfile'" 1>&2 exit 1 ;; esac if test -z "$base_compile"; then $echo "$modename: you must specify a compilation command" 1>&2 $echo "$help" 1>&2 exit 1 fi # Delete any leftover library objects. if test "$build_old_libs" = yes; then $run $rm $obj $libobj trap "$run $rm $obj $libobj; exit 1" 1 2 15 else $run $rm $libobj trap "$run $rm $libobj; exit 1" 1 2 15 fi # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile # All platforms use -DPIC, to notify preprocessed assembler code. $show "$base_compile$pic_flag -DPIC $srcfile" if $run eval "$base_compile\$pic_flag -DPIC \$srcfile"; then : else test -n "$obj" && $run $rm $obj exit 1 fi # If we have no pic_flag, then copy the object into place and finish. if test -z "$pic_flag"; then $show "$LN_S $obj $libobj" $run $LN_S $obj $libobj exit $? fi # Just move the object, then go on to compile the next one $show "$mv $obj $libobj" $run $mv $obj $libobj || exit 1 # Allow error messages only from the first compilation. suppress_output=' >/dev/null 2>&1' fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then # Suppress compiler output if we already did a PIC compilation. $show "$base_compile $srcfile$suppress_output" if $run eval "$base_compile \$srcfile$suppress_output"; then : else $run $rm $obj $libobj exit 1 fi fi # Create an invalid libtool object if no PIC, so that we do not # accidentally link it into a program. if test "$build_libtool_libs" != yes; then $show "echo timestamp > $libobj" $run eval "echo timestamp > \$libobj" || exit $? fi exit 0 ;; # libtool link mode link) modename="$modename: link" CC="$nonopt" allow_undefined=yes compile_command="$CC" finalize_command="$CC" compile_shlibpath= finalize_shlibpath= deplibs= dlfiles= dlprefiles= export_dynamic=no hardcode_libdirs= libobjs= link_against_libtool_libs= ltlibs= objs= prev= prevarg= release= rpath= perm_rpath= temp_rpath= vinfo= # We need to know -static, to get the right output filenames. for arg do case "$arg" in -all-static | -static) if test "X$arg" = "X-all-static" && test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 fi build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. for arg do # If the previous option needs an argument, assign it. if test -n "$prev"; then case "$prev" in output) compile_command="$compile_command @OUTPUT@" finalize_command="$finalize_command @OUTPUT@" ;; esac case "$prev" in dlfiles|dlprefiles) case "$arg" in *.la | *.lo) ;; # We handle these cases below. *) dlprefiles="$dlprefiles $arg" test "$prev" = dlfiles && dlfiles="$dlfiles $arg" prev= ;; esac ;; release) release="-$arg" prev= continue ;; rpath) rpath="$rpath $arg" prev= continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi prevarg="$arg" case "$arg" in -all-static) if test -n "$link_static_flag"; then compile_command="$compile_command $link_static_flag" finalize_command="$finalize_command $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) if test "$export_dynamic" != yes; then export_dynamic=yes if test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" else arg= fi # Add the symbol object into the linking commands. compile_command="$compile_command @SYMFILE@" finalize_command="$finalize_command @SYMFILE@" fi ;; -L*) dir=`$echo "X$arg" | $Xsed -e 's%^-L\(.*\)$%\1%'` case "$dir" in /* | [A-Za-z]:\\*) # Add the corresponding hardcode_libdir_flag, if it is not identical. ;; *) $echo "$modename: \`-L$dir' cannot specify a relative directory" 1>&2 exit 1 ;; esac deplibs="$deplibs $arg" ;; -l*) deplibs="$deplibs $arg" ;; -no-undefined) allow_undefined=no continue ;; -o) prev=output ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -static) # If we have no pic_flag, then this is the same as -all-static. if test -z "$pic_flag" && test -n "$link_static_flag"; then compile_command="$compile_command $link_static_flag" finalize_command="$finalize_command $link_static_flag" fi continue ;; -version-info) prev=vinfo continue ;; # Some other compiler flag. -* | +*) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case "$arg" in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac ;; *.o | *.a) # A standard object. objs="$objs $arg" ;; *.lo) # A library object. if test "$prev" = dlfiles; then dlfiles="$dlfiles $arg" if test "$build_libtool_libs" = yes; then prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e 's/\.lo$/\.o/'` prev= fi libobjs="$libobjs $arg" ;; *.la) # A libtool-controlled library. dlname= libdir= library_names= old_library= # Check to see that this really is a libtool archive. if (sed -e '2q' $arg | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then : else $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2 exit 1 fi # If there is no directory component, then add one. case "$arg" in */* | *\\*) . $arg ;; *) . ./$arg ;; esac if test -z "$libdir"; then $echo "$modename: \`$arg' contains no -rpath information" 1>&2 exit 1 fi # Get the name of the library we link against. linklib= for l in $old_library $library_names; do linklib="$l" done if test -z "$linklib"; then $echo "$modename: cannot find name of link library for \`$arg'" 1>&2 exit 1 fi # Find the relevant object directory and library name. name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'` dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$dir" = "X$arg"; then dir="$objdir" else dir="$dir/$objdir" fi # This library was specified with -dlopen. if test "$prev" = dlfiles; then dlfiles="$dlfiles $arg" if test -z "$dlname"; then # If there is no dlname, we need to preload. prev=dlprefiles else # We should not create a dependency on this library, but we # may need any libraries it requires. compile_command="$compile_command$dependency_libs" finalize_command="$finalize_command$dependency_libs" prev= continue fi fi # The library was specified with -dlpreopen. if test "$prev" = dlprefiles; then # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then dlprefiles="$dlprefiles $dir/$old_library" else dlprefiles="$dlprefiles $dir/$linklib" fi prev= fi if test "$build_libtool_libs" = yes && test -n "$library_names"; then link_against_libtool_libs="$link_against_libtool_libs $arg" if test -n "$shlibpath_var"; then # Make sure the rpath contains only unique directories. case "$temp_rpath " in *" $dir "*) ;; *) temp_rpath="$temp_rpath $dir" ;; esac fi # This is the magic to use -rpath. if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then # Put the magic libdir with the hardcode flag. hardcode_libdirs="$libdir" libdir="@HARDCODE_LIBDIRS@" else # Just accumulate the unique libdirs. case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac libdir= fi fi if test -n "$libdir"; then eval flag=\"$hardcode_libdir_flag_spec\" compile_command="$compile_command $flag" finalize_command="$finalize_command $flag" fi elif test -n "$runpath_var"; then # Do the same for the permanent run path. case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi case "$hardcode_action" in immediate) if test "$hardcode_direct" = no; then compile_command="$compile_command $dir/$linklib" elif test "$hardcode_minus_L" = no; then compile_command="$compile_command -L$dir -l$name" elif test "$hardcode_shlibpath_var" = no; then compile_shlibpath="$compile_shlibpath$dir:" compile_command="$compile_command -l$name" fi ;; relink) # We need an absolute path. case "$dir" in /* | [A-Za-z]:\\*) ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 exit 1 fi dir="$absdir" ;; esac if test "$hardcode_direct" = yes; then compile_command="$compile_command $dir/$linklib" elif test "$hardcode_minus_L" = yes; then compile_command="$compile_command -L$dir -l$name" elif test "$hardcode_shlibpath_var" = yes; then compile_shlibpath="$compile_shlibpath$dir:" compile_command="$compile_command -l$name" fi ;; *) $echo "$modename: \`$hardcode_action' is an unknown hardcode action" 1>&2 exit 1 ;; esac # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes; then finalize_command="$finalize_command $libdir/$linklib" elif test "$hardcode_minus_L" = yes; then finalize_command="$finalize_command -L$libdir -l$name" elif test "$hardcode_shlibpath_var" = yes; then finalize_shlibpath="$finalize_shlibpath$libdir:" finalize_command="$finalize_command -l$name" else # We cannot seem to hardcode it, guess we'll fake it. finalize_command="$finalize_command -L$libdir -l$name" fi else # Transform directly to old archives if we don't build new libraries. if test -n "$pic_flag" && test -z "$old_library"; then $echo "$modename: cannot find static library for \`$arg'" 1>&2 exit 1 fi # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_command="$compile_command $dir/$linklib" finalize_command="$finalize_command $dir/$linklib" else compile_command="$compile_command -L$dir -l$name" finalize_command="$finalize_command -L$dir -l$name" fi fi # Add in any libraries that this one depends upon. compile_command="$compile_command$dependency_libs" finalize_command="$finalize_command$dependency_libs" continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case "$arg" in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac ;; esac # Now actually substitute the argument into the commands. if test -n "$arg"; then compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi done if test -n "$prev"; then $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 $echo "$help" 1>&2 exit 1 fi if test -n "$vinfo" && test -n "$release"; then $echo "$modename: you cannot specify both \`-version-info' and \`-release'" 1>&2 $echo "$help" 1>&2 exit 1 fi oldlib= oldobjs= case "$output" in "") $echo "$modename: you must specify an output file" 1>&2 $echo "$help" 1>&2 exit 1 ;; */* | *\\*) $echo "$modename: output file \`$output' must have no directory components" 1>&2 exit 1 ;; *.a) # Now set the variables for building old libraries. build_libtool_libs=no build_old_libs=yes oldlib="$output" $show "$rm $oldlib" $run $rm $oldlib ;; *.la) # Make sure we only generate libraries of the form `libNAME.la'. case "$output" in lib*) ;; *) $echo "$modename: libtool library \`$arg' must begin with \`lib'" 1>&2 $echo "$help" 1>&2 exit 1 ;; esac name=`$echo "X$output" | $Xsed -e 's/\.la$//' -e 's/^lib//'` eval libname=\"$libname_spec\" # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= current=0 revision=0 age=0 if test -n "$objs"; then $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1 exit 1 fi # How the heck are we supposed to write a wrapper for a shared library? if test -n "$link_against_libtool_libs"; then $echo "$modename: libtool library \`$output' may not depend on uninstalled libraries:$link_against_libtool_libs" 1>&2 exit 1 fi if test -n "$dlfiles$dlprefiles"; then $echo "$modename: warning: \`-dlopen' is ignored while creating libtool libraries" 1>&2 # Nullify the symbol file. compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi if test -z "$rpath"; then $echo "$modename: you must specify an installation directory with \`-rpath'" 1>&2 $echo "$help" 1>&2 exit 1 fi set dummy $rpath if test $# -gt 2; then $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 fi install_libdir="$2" # Parse the version information argument. IFS="${IFS= }"; save_ifs="$IFS"; IFS=':' set dummy $vinfo IFS="$save_ifs" if test -n "$5"; then $echo "$modename: too many parameters to \`-version-info'" 1>&2 $echo "$help" 1>&2 exit 1 fi test -n "$2" && current="$2" test -n "$3" && revision="$3" test -n "$4" && age="$4" # Check that each of the things are valid numbers. case "$current" in 0 | [1-9] | [1-9][0-9]*) ;; *) $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 ;; esac case "$revision" in 0 | [1-9] | [1-9][0-9]*) ;; *) $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 ;; esac case "$age" in 0 | [1-9] | [1-9][0-9]*) ;; *) $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 ;; esac if test $age -gt $current; then $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 fi # Calculate the version variables. version_vars="version_type current age revision" case "$version_type" in none) ;; linux) version_vars="$version_vars major versuffix" major=`expr $current - $age` versuffix="$major.$age.$revision" ;; osf) version_vars="$version_vars versuffix verstring" major=`expr $current - $age` versuffix="$current.$age.$revision" verstring="$versuffix" # Add in all the interfaces that we are compatible with. loop=$age while test $loop != 0; do iface=`expr $current - $loop` loop=`expr $loop - 1` verstring="$verstring:${iface}.0" done # Make executables depend on our current version. verstring="$verstring:${current}.0" ;; sunos) version_vars="$version_vars major versuffix" major="$current" versuffix="$current.$revision" ;; *) $echo "$modename: unknown library version type \`$version_type'" 1>&2 echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit 1 ;; esac # Create the output directory, or remove our outputs if we need to. if test -d $objdir; then $show "$rm $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*" $run $rm $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.* else $show "$mkdir $objdir" $run $mkdir $objdir status=$? if test $status -eq 0 || test -d $objdir; then : else exit $status fi fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi # Add libc to deplibs on all systems. dependency_libs="$deplibs" deplibs="$deplibs -lc" if test "$build_libtool_libs" = yes; then # Get the real and link names of the library. eval library_names=\"$library_names_spec\" set dummy $library_names realname="$2" shift; shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi lib="$objdir/$realname" for link do linknames="$linknames $link" done # Use standard objects if they are PIC. test -z "$pic_flag" && libobjs=`$echo "X$libobjs " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//g'` # Do each of the archive commands. eval cmds=\"$archive_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" # Create links to the real library. for linkname in $linknames; do $show "(cd $objdir && $LN_S $realname $linkname)" $run eval '(cd $objdir && $LN_S $realname $linkname)' || exit $? done # If -export-dynamic was specified, set the dlname. if test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi # Now set the variables for building old libraries. oldlib="$objdir/$libname.a" ;; *.lo | *.o) if test -n "$link_against_libtool_libs"; then $echo "$modename: error: cannot link libtool libraries into reloadable objects" 1>&2 exit 1 fi if test -n "$deplibs"; then $echo "$modename: warning: \`-l' and \`-L' are ignored while creating objects" 1>&2 fi if test -n "$dlfiles$dlprefiles"; then $echo "$modename: warning: \`-dlopen' is ignored while creating objects" 1>&2 # Nullify the symbol file. compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi if test -n "$rpath"; then $echo "$modename: warning: \`-rpath' is ignored while creating objects" 1>&2 fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored while creating objects" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored while creating objects" 1>&2 fi case "$output" in *.lo) if test -n "$objs"; then $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 exit 1 fi libobj="$output" obj=`$echo "X$output" | $Xsed -e 's/\.lo$/.o/'` ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $run $rm $obj $libobj # Create the old-style object. reload_objs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.a //g' -e 's/\.lo /.o /g' -e 's/ $//g'` output="$obj" eval cmds=\"$reload_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" # Exit if we aren't doing a library object file. test -z "$libobj" && exit 0 if test "$build_libtool_libs" != yes; then # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. $show "echo timestamp > $libobj" $run eval "echo timestamp > $libobj" || exit $? exit 0 fi if test -n "$pic_flag"; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs" output="$libobj" eval cmds=\"$reload_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" else # Just create a symlink. $show "$LN_S $obj $libobj" $run $LN_S $obj $libobj || exit 1 fi exit 0 ;; *) if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored while linking programs" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored while creating objects" 1>&2 fi if test -n "$rpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then # Put the magic libdir with the hardcode flag. hardcode_libdirs="$libdir" libdir="@HARDCODE_LIBDIRS@" else # Just accumulate the unique libdirs. case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac libdir= fi fi if test -n "$libdir"; then eval flag=\"$hardcode_libdir_flag_spec\" compile_command="$compile_command $flag" finalize_command="$finalize_command $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi done fi # Substitute the hardcoded libdirs into the compile commands. if test -n "$hardcode_libdir_separator"; then compile_command=`$echo "X$compile_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"` fi if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$echo "X$compile_command " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'` finalize_command=`$echo "X$finalize_command " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'` fi if test "$export_dynamic" = yes && test -n "$NM" && test -n "$global_symbol_pipe"; then dlsyms="${output}S.c" else dlsyms= fi if test -n "$dlsyms"; then # Add our own program objects to the preloaded list. dlprefiles=`$echo "X$objs$dlprefiles " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'` # Discover the nlist of each of the dlfiles. nlist="$objdir/${output}.nm" if test -d $objdir; then $show "$rm $nlist ${nlist}T" $run $rm "$nlist" "${nlist}T" else $show "$mkdir $objdir" $run $mkdir $objdir status=$? if test $status -eq 0 || test -d $objdir; then : else exit $status fi fi for arg in $dlprefiles; do $show "extracting global C symbols from \`$arg'" $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done # Parse the name list into a source file. $show "creating $objdir/$dlsyms" if test -z "$run"; then # Make sure we at least have an empty file. test -f "$nlist" || : > "$nlist" # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" wcout=`wc "$nlist" 2>/dev/null` count=`echo "X$wcout" | $Xsed -e 's/^[ ]*\([0-9][0-9]*\).*$/\1/'` (test "$count" -ge 0) 2>/dev/null || count=-1 else $rm "$nlist"T count=-1 fi case "$dlsyms" in "") ;; *.c) $echo > "$objdir/$dlsyms" "\ /* $dlsyms - symbol resolution table for \`$output' dlsym emulation. */ /* Generated by $PROGRAM - GNU $PACKAGE $VERSION */ #ifdef __cplusplus extern \"C\" { #endif /* Prevent the only kind of declaration conflicts we can make. */ #define dld_preloaded_symbol_count some_other_symbol #define dld_preloaded_symbols some_other_symbol /* External symbol declarations for the compiler. */\ " if test -f "$nlist"; then sed -e 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> "$objdir/$dlsyms" else echo '/* NONE */' >> "$objdir/$dlsyms" fi $echo >> "$objdir/$dlsyms" "\ #undef dld_preloaded_symbol_count #undef dld_preloaded_symbols #if defined (__STDC__) && __STDC__ # define __ptr_t void * #else # define __ptr_t char * #endif /* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */ int dld_preloaded_symbol_count = $count; /* The mapping between symbol names and symbols. */ struct { char *name; __ptr_t address; } dld_preloaded_symbols[] = {\ " if test -f "$nlist"; then sed 's/^\(.*\) \(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$nlist" >> "$objdir/$dlsyms" fi $echo >> "$objdir/$dlsyms" "\ {0, (__ptr_t) 0} }; #ifdef __cplusplus } #endif\ " ;; *) $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 exit 1 ;; esac fi # Now compile the dynamic symbol file. $show "(cd $objdir && $CC -c$no_builtin_flag \"$dlsyms\")" $run eval '(cd $objdir && $CC -c$no_builtin_flag "$dlsyms")' || exit $? # Transform the symbol file into the correct name. compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.o%"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.o%"` elif test "$export_dynamic" != yes; then test -n "$dlfiles$dlprefiles" && $echo "$modename: warning: \`-dlopen' and \`-dlpreopen' are ignored without \`-export-dynamic'" 1>&2 else # We keep going just in case the user didn't refer to # dld_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 # Nullify the symbol file. compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then # Replace the output file specification. compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # We have no uninstalled library dependencies, so finalize right now. $show "$compile_command" $run eval "$compile_command" exit $? fi # Replace the output file specification. compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'%g'` finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'T%g'` # Create the binary in the object directory, then wrap it. if test -d $objdir; then : else $show "$mkdir $objdir" $run $mkdir $objdir status=$? if test $status -eq 0 || test -d $objdir; then : else exit $status fi fi if test -n "$shlibpath_var"; then # We should set the shlibpath_var rpath= for dir in $temp_rpath; do case "$dir" in /* | [A-Za-z]:\\*) # Absolute path. rpath="$rpath$dir:" ;; *) # Relative path: add a thisdir entry. rpath="$rpath\$thisdir/$dir:" ;; esac done temp_rpath="$rpath" fi # Delete the old output file. $run $rm $output if test -n "$compile_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done compile_command="$runpath_var=\"$rpath\$$runpath_var\" $compile_command" finalize_command="$runpath_var=\"$rpath\$$runpath_var\" $finalize_command" fi case "$hardcode_action" in relink) # AGH! Flame the AIX and HP-UX people for me, will ya? $echo "$modename: warning: using a buggy system linker" 1>&2 $echo "$modename: relinking will be required before \`$output' can be installed" 1>&2 ;; esac $show "$compile_command" $run eval "$compile_command" || exit $? # Now create the wrapper script. $show "creating $output" # Quote the finalize command for shipping. finalize_command=`$echo "X$finalize_command" | $Xsed -e "$sed_quote_subst"` # Quote $echo for shipping. qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` # Only actually do things if our run command is non-null. if test -z "$run"; then $rm $output trap "$rm $output; exit 1" 1 2 15 $echo > $output "\ #! /bin/sh # $output - temporary wrapper script for $objdir/$output # Generated by ltmain.sh - GNU $PACKAGE $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of \``pwd`'. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e s/^X//' sed_quote_subst='$sed_quote_subst' # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variables: link_against_libtool_libs='$link_against_libtool_libs' finalize_command=\"$finalize_command\" else # When we are sourced in execute mode, \$file and \$echo are already set. if test \"\$libtool_execute_magic\" = \"$magic\"; then : else echo=\"$qecho\" file=\"\$0\" fi\ " $echo >> $output "\ # Find the directory that this script lives in. thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in /* | [A-Za-z]:\\*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` done # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" progdir=\"\$thisdir/$objdir\" program='$output' if test -f \"\$progdir/\$program\"; then" # Export our shlibpath_var if we have one. if test -n "$shlibpath_var" && test -n "$temp_rpath"; then $echo >> $output "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/:*\$//'\` export $shlibpath_var " fi $echo >> $output "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. # Export the path to the program. PATH=\"\$progdir:\$PATH\" export PATH exec \$program \${1+\"\$@\"} \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" exit 1 fi else # The program doesn't exist. \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 \$echo \"This script is just a wrapper for \$program.\" 1>&2 echo \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " chmod +x $output fi exit 0 ;; esac # See if we need to build an old-fashioned archive. if test "$build_old_libs" = "yes"; then # Transform .lo files to .o files. oldobjs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.a //g' -e 's/\.lo /.o /g' -e 's/ $//g'` # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then eval cmds=\"$old_archive_from_new_cmds\" else eval cmds=\"$old_archive_cmds\" fi IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # Now create the libtool archive. case "$output" in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.a" $show "creating $output" # Only create the output if not a dry run. if test -z "$run"; then $echo > $output "\ # $output - a libtool library file # Generated by ltmain.sh - GNU $PACKAGE $VERSION # The name that we can dlopen(3). dlname='$dlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Version information for $libname. current=$current age=$age revision=$revision # Directory that this library needs to be installed in: libdir='$install_libdir'\ " fi # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. $show "(cd $objdir && $LN_S ../$output $output)" $run eval "(cd $objdir && $LN_S ../$output $output)" || exit 1 ;; esac exit 0 ;; # libtool install mode install) modename="$modename: install" # There may be an optional /bin/sh argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL"; then # Aesthetically quote it. arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` case "$arg" in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac install_prog="$arg " arg="$1" shift else install_prog= arg="$nonopt" fi # The real first argument should be the name of the installation program. # Aesthetically quote it. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case "$arg" in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac install_prog="$install_prog$arg" # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir= stripme= for arg do if test -n "$dest"; then files="$files $dest" dest="$arg" continue fi case "$arg" in -d) isdir=yes ;; -f) prev="-f" ;; -g) prev="-g" ;; -m) prev="-m" ;; -o) prev="-o" ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then prev= else dest="$arg" continue fi ;; esac # Aesthetically quote the argument. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case "$arg" in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac install_prog="$install_prog $arg" done if test -z "$install_prog"; then $echo "$modename: you must specify an install program" 1>&2 $echo "$help" 1>&2 exit 1 fi if test -n "$prev"; then $echo "$modename: the \`$prev' option requires an argument" 1>&2 $echo "$help" 1>&2 exit 1 fi if test -z "$files"; then if test -z "$dest"; then $echo "$modename: no file or destination specified" 1>&2 else $echo "$modename: you must specify a destination" 1>&2 fi $echo "$help" 1>&2 exit 1 fi # Strip any trailing slash from the destination. dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test -n "$isdir"; then destdir="$dest" destname= else destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` test "X$destdir" = "X$dest" && destdir=. destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` # Not a directory, so check to see that there is only one file specified. set dummy $files if test $# -gt 2; then $echo "$modename: \`$dest' is not a directory" 1>&2 $echo "$help" 1>&2 exit 1 fi fi case "$destdir" in /* | [A-Za-z]:\\*) ;; *) for file in $files; do case "$file" in *.lo) ;; *) $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 $echo "$help" 1>&2 exit 1 ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case "$file" in *.a) # Do the static libraries later. staticlibs="$staticlibs $file" ;; *.la) # Check to see that this really is a libtool archive. if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then : else $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 exit 1 fi library_names= old_library= # If there is no directory component, then add one. case "$file" in */* | *\\*) . $file ;; *) . ./$file ;; esac # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) current_libdirs="$current_libdirs $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) future_libdirs="$future_libdirs $libdir" ;; esac fi dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/" test "X$dir" = "X$file/" && dir= dir="$dir$objdir" # See the names of the shared library. set dummy $library_names if test -n "$2"; then realname="$2" shift shift # Install the shared library and build the symlinks. $show "$install_prog $dir/$realname $destdir/$realname" $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $? test "X$dlname" = "X$realname" && dlname= if test $# -gt 0; then # Delete the old symlinks. rmcmd="$rm" for linkname do rmcmd="$rmcmd $destdir/$linkname" done $show "$rmcmd" $run $rmcmd # ... and create new ones. for linkname do test "X$dlname" = "X$linkname" && dlname= $show "(cd $destdir && $LN_S $realname $linkname)" $run eval "(cd $destdir && $LN_S $realname $linkname)" done fi if test -n "$dlname"; then # Install the dynamically-loadable library. $show "$install_prog $dir/$dlname $destdir/$dlname" $run eval "$install_prog $dir/$dlname $destdir/$dlname" || exit $? fi # Do each command in the postinstall commands. lib="$destdir/$realname" eval cmds=\"$postinstall_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # Install the pseudo-library for information purposes. name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` $show "$install_prog $file $destdir/$name" $run eval "$install_prog $file $destdir/$name" || exit $? # Maybe install the static library, too. test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case "$destfile" in *.lo) staticdest=`$echo "X$destfile" | $Xsed -e 's/\.lo$/\.o/'` ;; *.o) staticdest="$destfile" destfile= ;; *) $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 $echo "$help" 1>&2 exit 1 ;; esac # Install the libtool object if requested. if test -n "$destfile"; then $show "$install_prog $file $destfile" $run eval "$install_prog $file $destfile" || exit $? fi # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. staticobj=`$echo "X$file" | $Xsed -e 's/\.lo$/\.o/'` $show "$install_prog $staticobj $staticdest" $run eval "$install_prog \$staticobj \$staticdest" || exit $? fi exit 0 ;; *) # Do a test to see if this is really a libtool program. if (sed -e '4q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then link_against_libtool_libs= finalize_command= # If there is no directory component, then add one. case "$file" in */* | *\\*) . $file ;; *) . ./$file ;; esac # Check the variables that should have been set. if test -z "$link_against_libtool_libs" || test -z "$finalize_command"; then $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 exit 1 fi finalize=yes for lib in $link_against_libtool_libs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then # If there is no directory component, then add one. case "$lib" in */* | *\\*) . $lib ;; *) . ./$lib ;; esac fi libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`" if test -z "$libdir"; then $echo "$modename: warning: \`$lib' contains no -rpath information" 1>&2 elif test -f "$libfile"; then : else $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 finalize=no fi done if test "$hardcode_action" = relink; then if test "$finalize" = yes; then $echo "$modename: warning: relinking \`$file' on behalf of your buggy system linker" 1>&2 $show "$finalize_command" if $run eval "$finalize_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 continue fi file="$objdir/$file"T else $echo "$modename: warning: cannot relink \`$file' on behalf of your buggy system linker" 1>&2 fi else # Install the binary that we compiled earlier. file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi $show "$install_prog$stripme $file $dest" $run eval "$install_prog\$stripme \$file \$dest" || exit $? ;; esac done for file in $staticlibs; do name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` # Set up the ranlib parameters. oldlib="$destdir/$name" $show "$install_prog $file $oldlib" $run eval "$install_prog \$file \$oldlib" || exit $? # Do each command in the postinstall commands. eval cmds=\"$old_postinstall_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" done if test -n "$future_libdirs"; then $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 fi if test -n "$current_libdirs"; then # Maybe just do a dry run. test -n "$run" && current_libdirs=" -n$current_libdirs" exec $SHELL $0 --finish$current_libdirs exit 1 fi exit 0 ;; # libtool finish mode finish) modename="$modename: finish" libdirs="$nonopt" if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for dir do libdirs="$libdirs $dir" done for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. eval cmds=\"$finish_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" done IFS="$save_ifs" fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $run eval "$cmds" fi done fi echo "------------------------------------------------------------------------------" echo "Libraries have been installed in:" for libdir in $libdirs; do echo " $libdir" done echo echo "To link against installed libraries in a given directory, LIBDIR," echo "you must use the \`-LLIBDIR' flag during linking." echo echo " You will also need to do one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the \`$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then echo " - add LIBDIR to the \`$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" echo " - use the \`$flag' linker flag" fi if test -f /etc/ld.so.conf; then echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi echo echo "See any operating system documentation about shared libraries for" echo "more information, such as the ld(1) and ld.so(8) manual pages." echo "------------------------------------------------------------------------------" exit 0 ;; # libtool execute mode execute) modename="$modename: execute" # The first argument is the command name. cmd="$nonopt" if test -z "$cmd"; then $echo "$modename: you must specify a COMMAND" 1>&2 $echo "$help" exit 1 fi # Handle -dlopen flags immediately. for file in $execute_dlfiles; do if test -f "$file"; then : else $echo "$modename: \`$file' is not a file" 1>&2 $echo "$help" 1>&2 exit 1 fi dir= case "$file" in *.la) # Check to see that this really is a libtool archive. if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 exit 1 fi # Read the libtool library. dlname= library_names= # If there is no directory component, then add one. case "$file" in */* | *\\*) . $file ;; *) . ./$file ;; esac # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" continue fi dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. if test -f "$dir/$objdir/$dlname"; then dir="$dir/$objdir" else $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 exit 1 fi ;; *.lo) # Just add the directory containing the .lo file. dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. ;; *) $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case "$file" in -*) ;; *) # Do a test to see if this is really a libtool program. if (sed -e '4q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then # If there is no directory component, then add one. case "$file" in */* | *\\*) . $file ;; *) . ./$file ;; esac # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` args="$args \"$file\"" done if test -z "$run"; then # Export the shlibpath_var. eval "export $shlibpath_var" # Now actually exec the command. eval "exec \$cmd$args" $echo "$modename: cannot exec \$cmd$args" exit 1 else # Display what would be done. eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" $echo "export $shlibpath_var" $echo "$cmd$args" exit 0 fi ;; # libtool uninstall mode uninstall) modename="$modename: uninstall" rm="$nonopt" files= for arg do case "$arg" in -*) rm="$rm $arg" ;; *) files="$files $arg" ;; esac done if test -z "$rm"; then $echo "$modename: you must specify an RM program" 1>&2 $echo "$help" 1>&2 exit 1 fi for file in $files; do dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` rmfiles="$file" case "$name" in *.la) # Possibly a libtool archive, so verify it. if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then . $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do rmfiles="$rmfiles $dir/$n" test "X$n" = "X$dlname" && dlname= done test -n "$dlname" && rmfiles="$rmfiles $dir/$dlname" test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library" $show "$rm $rmfiles" $run $rm $rmfiles if test -n "$library_names"; then # Do each command in the postuninstall commands. eval cmds=\"$postuninstall_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" done IFS="$save_ifs" fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. eval cmds=\"$old_postuninstall_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" done IFS="$save_ifs" fi # FIXME: should reinstall the best remaining shared library. fi ;; *.lo) if test "$build_old_libs" = yes; then oldobj=`$echo "X$name" | $Xsed -e 's/\.lo$/\.o/'` rmfiles="$rmfiles $dir/$oldobj" fi $show "$rm $rmfiles" $run $rm $rmfiles ;; *) $show "$rm $rmfiles" $run $rm $rmfiles ;; esac done exit 0 ;; "") $echo "$modename: you must specify a MODE" 1>&2 $echo "$generic_help" 1>&2 exit 1 ;; esac $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$generic_help" 1>&2 exit 1 fi # test -z "$show_help" # We need to display help for each of the modes. case "$mode" in "") $echo \ "Usage: $modename [OPTION]... [MODE-ARG]... Provide generalized library-building support services. -n, --dry-run display commands without modifying any files --features display configuration information and exit --finish same as \`--mode=finish' --help display this help message and exit --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] --quiet same as \`--silent' --silent don't print informational messages --version print version information MODE must be one of the following: compile compile a source file into a libtool object execute automatically set library path, then run a program finish complete the installation of libtool libraries install install libraries or executables link create a library or an executable uninstall remove libraries from an installed directory MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for a more detailed description of MODE." exit 0 ;; compile) $echo \ "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $echo \ "Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $echo \ "Usage: $modename [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $echo \ "Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $echo \ "Usage: $modename [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to dld_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -static do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required. If OUTPUT-FILE ends in \`.a', then a standard library is created using \`ar' and \`ranlib'. If OUTPUT-FILE ends in \`.lo' or \`.o', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $echo "Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$help" 1>&2 exit 1 ;; esac echo $echo "Try \`$modename --help' for more information about other modes." exit 0 # Local Variables: # mode:shell-script # sh-indentation:2 # End: