shithub: riscv

ref: 1ee1bfaa8c5644092e0c1ca3985ee74813bbfb1d
dir: /sys/src/9/pc/vgat2r4.c/

View raw version
#include "u.h"
#include "../port/lib.h"
#include "mem.h"
#include "dat.h"
#include "fns.h"
#include "io.h"
#include "../port/pci.h"
#include "../port/error.h"

#define	Image	IMAGE
#include <draw.h>
#include <memdraw.h>
#include <cursor.h>
#include "screen.h"

/*
 * #9 Ticket to Ride IV.
 */
enum {
	IndexLo		= 0x10/4,
	IndexHi		= 0x14/4,
	Data		= 0x18/4,
	IndexCtl	= 0x1C/4,

	Zoom		= 0x54/4,
};

enum {						/* index registers */
	CursorSyncCtl	= 0x03,
	  HsyncHi = 0x01,
	  HsyncLo = 0x02,
	  VsyncHi = 0x04,
	  VsyncLo = 0x08,

	CursorCtl	= 0x30,
	CursorXLo	= 0x31,
	CursorXHi	= 0x32,
	CursorYLo	= 0x33,
	CursorYHi	= 0x34,
	CursorHotX	= 0x35,
	CursorHotY	= 0x36,

	CursorR1	= 0x40,
	CursorG1	= 0x41,
	CursorB1	= 0x42,
	CursorR2	= 0x43,
	CursorG2	= 0x44,
	CursorB2	= 0x45,
	CursorR3	= 0x46,
	CursorG3	= 0x47,
	CursorB3	= 0x48,

	CursorArray	= 0x100,

	CursorMode32x32	= 0x23,
	CursorMode64x64	= 0x27,
	CursorMode	= CursorMode32x32,
};

static void
t2r4enable(VGAscr* scr)
{
	Pcidev *p;
	void *mmio;

	if(scr->mmio)
		return;
	p = scr->pci;
	if(p == nil)
		return;
	if(p->mem[4].bar & 1)
		return;
	mmio = vmap(p->mem[4].bar & ~0x0F, p->mem[4].size);
	if(mmio == nil)
		return;
	addvgaseg("t2r4mmio", p->mem[4].bar & ~0x0F, p->mem[4].size);

	scr->mmio = mmio;
	vgalinearpci(scr);
	if(scr->paddr)
		addvgaseg("t2r4screen", scr->paddr, scr->apsize);
}

static uchar
t2r4xi(VGAscr* scr, int index)
{
	ulong *mmio;

	mmio = scr->mmio;
	mmio[IndexLo] = index & 0xFF;
	mmio[IndexHi] = (index>>8) & 0xFF;

	return mmio[Data];
}

static void
t2r4xo(VGAscr* scr, int index, uchar data)
{
	ulong *mmio;

	mmio = scr->mmio;
	mmio[IndexLo] = index & 0xFF;
	mmio[IndexHi] = (index>>8) & 0xFF;

	mmio[Data] = data;
}

static void
t2r4curdisable(VGAscr* scr)
{
	if(scr->mmio == 0)
		return;
	t2r4xo(scr, CursorCtl, 0x00);
}

static void
t2r4curload(VGAscr* scr, Cursor* curs)
{
	uchar *data;
	int size, x, y, zoom;
	ulong clr, *mmio, pixels, set;

	mmio = scr->mmio;
	if(mmio == 0)
		return;

	/*
	 * Make sure cursor is off by initialising the cursor
	 * control to defaults.
	 */
	t2r4xo(scr, CursorCtl, 0x00);

	/*
	 * Set auto-increment mode for index-register addressing
	 * and initialise the cursor array index.
	 */
	mmio[IndexCtl] = 0x01;
	mmio[IndexLo] = CursorArray & 0xFF;
	mmio[IndexHi] = (CursorArray>>8) & 0xFF;

	/*
	 * Initialise the cursor RAM array. There are 2 planes,
	 * p0 and p1. Data is written 4 pixels per byte, with p1 the
	 * MS bit of each pixel.
	 * The cursor is set in X-Windows mode which gives the following
	 * truth table:
	 *	p1 p0	colour
	 *	 0  0	underlying pixel colour
	 *	 0  1	underlying pixel colour
	 *	 1  0	cursor colour 1
	 *	 1  1	cursor colour 2
	 * Put the cursor into the top-left of the array.
	 *
	 * Although this looks a lot like the IBM RGB524 cursor, the
	 * scanlines appear to be twice as long as they should be and
	 * some of the other features are missing.
	 */
	if(mmio[Zoom] & 0x0F)
		zoom = 32;
	else
		zoom = 16;
	data = (uchar*)&mmio[Data];
	for(y = 0; y < zoom; y++){
		clr = (curs->clr[2*y]<<8)|curs->clr[y*2 + 1];
		set = (curs->set[2*y]<<8)|curs->set[y*2 + 1];
		pixels = 0;
		for(x = 0; x < 16; x++){
			if(set & (1<<x))
				pixels |= 0x03<<(x*2);
			else if(clr & (1<<x))
				pixels |= 0x02<<(x*2);
		}

		*data = pixels>>24;
		*data = pixels>>16;
		*data = pixels>>8;
		*data = pixels;

		*data = 0x00;
		*data = 0x00;
		*data = 0x00;
		*data = 0x00;

		if(CursorMode == CursorMode32x32 && zoom == 16)
			continue;
		*data = pixels>>24;
		*data = pixels>>16;
		*data = pixels>>8;
		*data = pixels;

		*data = 0x00;
		*data = 0x00;
		*data = 0x00;
		*data = 0x00;
	}
	if(CursorMode == CursorMode32x32)
		size = 32;
	else
		size = 64;
	while(y < size){
		for(x = 0; x < size/8; x++){
			*data = 0x00;
			*data = 0x00;
		}
		y++;
	}
	mmio[IndexCtl] = 0x00;

	/*
	 * Initialise the hotpoint and enable the cursor.
	 */
	t2r4xo(scr, CursorHotX, -curs->offset.x);
	zoom = (scr->mmio[Zoom] & 0x0F)+1;
	t2r4xo(scr, CursorHotY, -curs->offset.y*zoom);

	t2r4xo(scr, CursorCtl, CursorMode);
}

static int
t2r4curmove(VGAscr* scr, Point p)
{
	int y, zoom;

	if(scr->mmio == 0)
		return 1;

	t2r4xo(scr, CursorXLo, p.x & 0xFF);
	t2r4xo(scr, CursorXHi, (p.x>>8) & 0x0F);

	zoom = (scr->mmio[Zoom] & 0x0F)+1;
	y = p.y*zoom;
	t2r4xo(scr, CursorYLo, y & 0xFF);
	t2r4xo(scr, CursorYHi, (y>>8) & 0x0F);

	return 0;
}

static void
t2r4curenable(VGAscr* scr)
{
	t2r4enable(scr);
	if(scr->mmio == 0)
		return;

	/*
	 * Make sure cursor is off by initialising the cursor
	 * control to defaults.
	 */
	t2r4xo(scr, CursorCtl, 0x00);

	/*
	 * Cursor colour 1 (white),
	 * cursor colour 2 (black).
	 */
	t2r4xo(scr, CursorR1, Pwhite);
	t2r4xo(scr, CursorG1, Pwhite);
	t2r4xo(scr, CursorB1, Pwhite);

	t2r4xo(scr, CursorR2, Pblack);
	t2r4xo(scr, CursorG2, Pblack);
	t2r4xo(scr, CursorB2, Pblack);

	/*
	 * Load, locate and enable the cursor, 64x64, mode 2.
	 */
	t2r4curload(scr, &cursor);
	t2r4curmove(scr, ZP);
	t2r4xo(scr, CursorCtl, CursorMode);
}

enum {
	Flow		= 0x08/4,
	Busy		= 0x0C/4,
	BufCtl		= 0x20/4,
	DeSorg		= 0x28/4,
	DeDorg		= 0x2C/4,
	DeSptch		= 0x40/4,
	DeDptch		= 0x44/4,
	CmdOpc		= 0x50/4,
	CmdRop		= 0x54/4,
	CmdStyle 	= 0x58/4,
	CmdPatrn 	= 0x5C/4,
	CmdClp		= 0x60/4,
	CmdPf		= 0x64/4,
	Fore		= 0x68/4,
	Back		= 0x6C/4,
	Mask		= 0x70/4,
	DeKey		= 0x74/4,
	Lpat		= 0x78/4,
	Pctrl 		= 0x7C/4,
	Clptl		= 0x80/4,
	Clpbr		= 0x84/4,
	XY0		= 0x88/4,
	XY1		= 0x8C/4,
	XY2		= 0x90/4,
	XY3		= 0x94/4,
	XY4		= 0x98/4,
	Alpha 		= 0x128/4,
	ACtl 		= 0x16C/4,

	RBaseD 		= 0x4000/4,
};

/* wait until pipeline ready for new command */
static void
waitforfifo(VGAscr *scr)
{
	int x;
	ulong *d;
	x = 0;

	d = scr->mmio + RBaseD;
	while((d[Busy]&1) && x++ < 1000000)
		;
	if(x >= 1000000)	/* shouldn't happen */
		iprint("busy %8lux\n", d[Busy]);
}

/* wait until command has finished executing */
static void
waitforcmd(VGAscr *scr)
{
	int x;
	ulong *d;
	x = 0;

	d = scr->mmio + RBaseD;
	while((d[Flow]&0x1B) && x++ < 1000000)
		;
	if(x >= 1000000)	/* shouldn't happen */
		iprint("flow %8lux\n", d[Flow]);
}

/* wait until memory controller not busy (i.e. wait for writes to flush) */
static void
waitformem(VGAscr *scr)
{
	int x;
	ulong *d;
	x = 0;

	d = scr->mmio + RBaseD;
	while((d[Flow]&2)&& x++ < 1000000)
		;
	if(x >= 1000000)	/* shouldn't happen */
		iprint("mem %8lux\n", d[Busy]);
}

static int
t2r4hwscroll(VGAscr *scr, Rectangle r, Rectangle sr)
{
	int ctl;
	Point dp, sp;
	ulong *d;
	int depth;

	if(r.min.y == sr.min.y){	/* a purely horizontal scroll */
		depth = scr->gscreen->depth;
		switch(depth){
		case 32:
			/*
			 * Using the SGI flat panels with the Ticket-to-Ride IV, horizontal
			 * 32-bit scrolls don't work perfectly on rectangles of width <= 24.
			 * we bail on a bigger bound for padding.
			 */
			if(Dx(r) < 32)
				return 0;
			break;
		case 16:
			/*
			 * Using the SGI flat panels with the Ticket-to-Ride IV, horizontal
			 * 16-bit scrolls don't work perfectly on rectangles of width <= 96.
			 * we bail on a bigger bound for padding.
			 */
			if(Dx(r) < 104)
				return 0;
			break;
		}
	}
	waitformem(scr);
	waitforfifo(scr);
	d = scr->mmio + RBaseD;
	ctl = 0;
	if(r.min.x <= sr.min.x){
		dp.x = r.min.x;
		sp.x = sr.min.x;
	}else{
		ctl |= 2;
		dp.x = r.max.x-1;
		sp.x = sr.max.x-1;
	}

	if(r.min.y < sr.min.y){
		dp.y = r.min.y;
		sp.y = sr.min.y;
	}else{
		ctl |= 1;
		dp.y = r.max.y-1;
		sp.y = sr.max.y-1;
	}

	d[CmdOpc] = 0x1;	/* bitblt */
	d[CmdRop] = 0xC;	/* copy source */
	d[CmdStyle] = 0;
	d[CmdPatrn] = 0;
	d[Fore] = 0;
	d[Back] = 0;

	/* writing XY1 executes cmd */
	d[XY3] = ctl;
	d[XY0] = (sp.x<<16)|sp.y;
	d[XY2] = (Dx(r)<<16)|Dy(r);
	d[XY4] = 0;
	d[XY1] = (dp.x<<16)|dp.y;
	waitforcmd(scr);

	return 1;
}

static int
t2r4hwfill(VGAscr *scr, Rectangle r, ulong sval)
{
	ulong *d;

	d = scr->mmio + RBaseD;

	waitformem(scr);
	waitforfifo(scr);
	d[CmdOpc] = 0x1;	/* bitblt */
	d[CmdRop] = 0xC;	/* copy source */
	d[CmdStyle] = 1;	/* use source from Fore register */
	d[CmdPatrn] = 0;	/* no stipple */
	d[Fore] = sval;
	d[Back] = sval;

	/* writing XY1 executes cmd */
	d[XY3] = 0;
	d[XY0] = (r.min.x<<16)|r.min.y;
	d[XY2] = (Dx(r)<<16)|Dy(r);
	d[XY4] = 0;
	d[XY1] = (r.min.x<<16)|r.min.y;
	waitforcmd(scr);

	return 1;
}

static void
t2r4blank(VGAscr *scr, int blank)
{
	uchar x;

	x = t2r4xi(scr, CursorSyncCtl);
	x &= ~0x0F;
	if(blank)
		x |= HsyncLo | VsyncLo;
	t2r4xo(scr, CursorSyncCtl, x);
}

static void
t2r4drawinit(VGAscr *scr)
{
	int fmt;
	ulong *d;

	switch(scr->gscreen->chan){
	case RGB16:
		fmt = 3;
		break;
	case XRGB32:
		fmt = 2;
		break;
	case RGB15:
		fmt = 1;
		break;
	default:
		scr->fill = nil;
		scr->scroll = nil;
		return;
	}

	d = scr->mmio + RBaseD;

	d[BufCtl] = fmt<<24;
	d[DeSorg] = 0;
	d[DeDorg] = 0;
	d[DeSptch] = scr->pitch;
	d[DeDptch] = scr->pitch;
	d[CmdClp] = 0;	/* 2 = inside rectangle */
	d[Mask] = ~0;
	d[DeKey] = 0;
	d[Clptl] = 0; 
	d[Clpbr] = 0xFFF0FFF0;
	d[Alpha] = 0;
	d[ACtl] = 0;

	scr->fill = t2r4hwfill;
	scr->scroll = t2r4hwscroll;
	scr->blank = t2r4blank;
}

VGAdev vgat2r4dev = {
	"t2r4",

	t2r4enable,
	nil,
	nil,
	nil,
	t2r4drawinit,
};

VGAcur vgat2r4cur = {
	"t2r4hwgc",

	t2r4curenable,
	t2r4curdisable,
	t2r4curload,
	t2r4curmove,
};