ref: 24420ab9eb9124dd2ac032beacd84e4a2f6ddf56
dir: /sys/src/cmd/con/hayes.c/
#include <u.h> #include <libc.h> void setspeed(int, int); int getspeed(char*, int); void godial(int, int, char*); int readmsg(int, int); void punt(char*, ...); int pulsed; int verbose; char msgbuf[128]; /* last message read */ enum { Ok, Success, Failure, Noise, }; typedef struct Msg Msg; struct Msg { char *text; int type; }; Msg msgs[] = { { "OK", Ok, }, { "NO CARRIER", Failure, }, { "ERROR", Failure, }, { "NO DIALTONE", Failure, }, { "BUSY", Failure, }, { "NO ANSWER", Failure, }, { "CONNECT", Success, }, { 0, 0 }, }; void usage(void) { punt("usage: hayes [-p] telno [device]"); } void main(int argc, char **argv) { int data = -1; int ctl = -1; char *cname; ARGBEGIN{ case 'p': pulsed = 1; break; case 'v': verbose = 1; break; default: usage(); }ARGEND switch(argc){ case 1: data = 1; break; case 2: data = open(argv[1], ORDWR); if(data < 0){ fprint(2, "hayes: %r opening %s\n", argv[1]); exits("hayes"); } cname = malloc(strlen(argv[1])+4); sprint(cname, "%sctl", argv[1]); ctl = open(cname, ORDWR); free(cname); break; default: usage(); } godial(data, ctl, argv[0]); exits(0); } int send(int fd, char *x) { return write(fd, x, strlen(x)); } void godial(int data, int ctl, char *number) { char *dialstr; int m; int baud; /* get the modem's attention */ if(send(data, "\r+++\r") < 0) punt("failed write"); readmsg(data, 2); sleep(1000); /* initialize */ if(send(data, "ATZ\r") < 0) punt("failed write"); m = readmsg(data, 2); if(m < 0) punt("can't get modem's attention"); /* * Q0 = report result codes * V1 = full word result codes * W1 = negotiation progress codes enabled * E1 = echo commands * M1 = speaker on until on-line */ if(send(data, "ATQ0V1E1M1\r") < 0) punt("failed write"); m = readmsg(data, 2); if(m != Ok) punt("can't get modem's attention"); if(send(data, "ATW1\r") < 0) punt("failed write"); readmsg(data, 2); sleep(1000); /* godial */ dialstr = malloc(6+strlen(number)); sprint(dialstr, "ATD%c%s\r", pulsed ? 'P' : 'T', number); if(send(data, dialstr) < 0) { free(dialstr); punt("failed write"); } free(dialstr); m = readmsg(data, 60); if(m != Success) punt("dial failed: %s", msgbuf); baud = getspeed(msgbuf, 9600); setspeed(ctl, baud); fprint(2, "hayes: connected at %d baud\n", baud); } /* * read until we see a message or we time out */ int readmsg(int f, int secs) { ulong start; char *p; int len; Dir *d; Msg *pp; p = msgbuf; len = sizeof(msgbuf) - 1; for(start = time(0); time(0) <= start+secs;){ if((d = dirfstat(f)) == nil) punt("failed read"); if(d->length == 0){ free(d); sleep(100); continue; } free(d); if(read(f, p, 1) <= 0) punt("failed read"); if(*p == '\n' || *p == '\r' || len == 0){ *p = 0; if(verbose && p != msgbuf) fprint(2, "%s\n", msgbuf); for(pp = msgs; pp->text; pp++) if(strncmp(pp->text, msgbuf, strlen(pp->text))==0) return pp->type; start = time(0); p = msgbuf; len = sizeof(msgbuf) - 1; continue; } len--; p++; } strcpy(msgbuf, "No response from modem"); return Noise; } /* * get baud rate from a connect message */ int getspeed(char *msg, int speed) { char *p; int s; p = msg + sizeof("CONNECT") - 1; while(*p == ' ' || *p == '\t') p++; s = atoi(p); if(s <= 0) return speed; else return s; } /* * set speed and RTS/CTS modem flow control */ void setspeed(int ctl, int baud) { char buf[32]; if(ctl < 0) return; sprint(buf, "b%d", baud); write(ctl, buf, strlen(buf)); write(ctl, "m1", 2); } void punt(char *fmt, ...) { char buf[256]; va_list arg; int n; strcpy(buf, "hayes: "); va_start(arg, fmt); n = vseprint(buf+strlen(buf), buf+sizeof(buf), fmt, arg) - buf; va_end(arg); buf[n] = '\n'; write(2, buf, n+1); exits("hayes"); }