ref: 290c921d1d01119b7d4550770da06c491508508f
dir: /sys/src/9/bcm/dat.h/
/*
* Time.
*
* HZ should divide 1000 evenly, ideally.
* 100, 125, 200, 250 and 333 are okay.
*/
#define HZ 100 /* clock frequency */
#define MS2HZ (1000/HZ) /* millisec per clock tick */
#define TK2SEC(t) ((t)/HZ) /* ticks to seconds */
enum {
Mhz = 1000 * 1000,
};
typedef struct Conf Conf;
typedef struct Confmem Confmem;
typedef struct FPsave FPsave;
typedef struct PFPU PFPU;
typedef struct ISAConf ISAConf;
typedef struct Label Label;
typedef struct Lock Lock;
typedef struct Memcache Memcache;
typedef struct MMMU MMMU;
typedef struct Mach Mach;
typedef struct Page Page;
typedef struct PhysUart PhysUart;
typedef struct PMMU PMMU;
typedef struct Proc Proc;
typedef u32int PTE;
typedef struct Soc Soc;
typedef struct Uart Uart;
typedef struct Ureg Ureg;
typedef uvlong Tval;
#pragma incomplete Ureg
#define MAXSYSARG 5 /* for mount(fd, mpt, flag, arg, srv) */
/*
* parameters for sysproc.c
*/
#define AOUT_MAGIC (E_MAGIC)
struct Lock
{
ulong key;
u32int sr;
uintptr pc;
Proc* p;
Mach* m;
int isilock;
};
struct Label
{
uintptr sp;
uintptr pc;
};
/*
* emulated or vfp3 floating point
*/
enum {
Maxfpregs = 32, /* could be 16 or 32, see Mach.fpnregs */
Nfpctlregs = 16,
};
struct FPsave
{
ulong status;
ulong control;
/*
* vfp3 with ieee fp regs; uvlong is sufficient for hardware but
* each must be able to hold an Internal from fpi.h for sw emulation.
*/
ulong regs[Maxfpregs][3];
int fpstate;
uintptr pc; /* of failed fp instr. */
};
struct PFPU
{
int fpstate;
FPsave fpsave[1];
};
enum
{
FPinit,
FPactive,
FPinactive,
FPemu,
/* bits or'd with the state */
FPillegal= 0x100,
};
struct Confmem
{
uintptr base;
usize npage;
uintptr limit;
uintptr kbase;
uintptr klimit;
};
struct Conf
{
ulong nmach; /* processors */
ulong nproc; /* processes */
Confmem mem[1]; /* physical memory */
ulong npage; /* total physical pages of memory */
usize upages; /* user page pool */
ulong copymode; /* 0 is copy on write, 1 is copy on reference */
ulong ialloc; /* max interrupt time allocation in bytes */
ulong pipeqsize; /* size in bytes of pipe queues */
ulong nimage; /* number of page cache image headers */
ulong nswap; /* number of swap pages */
int nswppo; /* max # of pageouts per segment pass */
ulong hz; /* processor cycle freq */
ulong mhz;
int monitor; /* flag */
};
/*
* MMU stuff in Mach.
*/
struct MMMU
{
PTE* mmul1; /* l1 for this processor */
int mmul1lo;
int mmul1hi;
int mmupid;
};
/*
* MMU stuff in proc
*/
#define NCOLOR 1 /* 1 level cache, don't worry about VCE's */
struct PMMU
{
Page* mmul2;
Page* mmul2cache; /* free mmu pages */
};
#include "../port/portdat.h"
struct Mach
{
int machno; /* physical id of processor */
uintptr splpc; /* pc of last caller to splhi */
Proc* proc; /* current process */
MMMU;
int flushmmu; /* flush current proc mmu state */
ulong ticks; /* of the clock since boot time */
Label sched; /* scheduler wakeup */
Lock alarmlock; /* access to alarm list */
void* alarm; /* alarms bound to this clock */
Proc* readied; /* for runproc */
ulong schedticks; /* next forced context switch */
int cputype;
ulong delayloop;
/* stats */
int tlbfault;
int tlbpurge;
int pfault;
int cs;
int syscall;
int load;
int intr;
uvlong fastclock; /* last sampled value */
uvlong inidle; /* time spent in idlehands() */
ulong spuriousintr;
int lastintr;
int ilockdepth;
Perf perf; /* performance counters */
int cpumhz;
uvlong cpuhz; /* speed of cpu */
uvlong cyclefreq; /* Frequency of user readable cycle counter */
/* vfp2 or vfp3 fpu */
int havefp;
int havefpvalid;
int fpon;
int fpconfiged;
int fpnregs;
ulong fpscr; /* sw copy */
int fppid; /* pid of last fault */
uintptr fppc; /* addr of last fault */
int fpcnt; /* how many consecutive at that addr */
/* save areas for exceptions, hold R0-R4 */
u32int sfiq[5];
u32int sirq[5];
u32int sund[5];
u32int sabt[5];
u32int smon[5]; /* probably not needed */
u32int ssys[5];
int stack[1];
};
/*
* Fake kmap.
*/
typedef void KMap;
#define VA(k) ((uintptr)(k))
#define kmap(p) (KMap*)((p)->pa|kseg0)
extern void kunmap(KMap*);
struct
{
char machs[MAXMACH]; /* active CPUs */
int exiting; /* shutdown */
}active;
extern register Mach* m; /* R10 */
extern register Proc* up; /* R9 */
extern uintptr kseg0;
extern Mach* machaddr[MAXMACH];
extern int normalprint;
/*
* a parsed plan9.ini line
*/
#define NISAOPT 8
struct ISAConf {
char *type;
ulong port;
int irq;
ulong dma;
ulong mem;
ulong size;
ulong freq;
int nopt;
char *opt[NISAOPT];
};
#define MACHP(n) (machaddr[n])
/*
* Horrid. But the alternative is 'defined'.
*/
#ifdef _DBGC_
#define DBGFLG (dbgflg[_DBGC_])
#else
#define DBGFLG (0)
#endif /* _DBGC_ */
int vflag;
extern char dbgflg[256];
#define dbgprint print /* for now */
/*
* hardware info about a device
*/
typedef struct {
ulong port;
int size;
} Devport;
struct DevConf
{
ulong intnum; /* interrupt number */
char *type; /* card type, malloced */
int nports; /* Number of ports */
Devport *ports; /* The ports themselves */
};
struct Soc { /* SoC dependent configuration */
ulong dramsize;
ulong iosize;
uintptr busdram;
uintptr busio;
uintptr physio;
uintptr virtio;
uintptr armlocal;
u32int l1ptedramattrs;
u32int l2ptedramattrs;
};
extern Soc soc;
/*
* GPIO
*/
enum {
Input = 0x0,
Output = 0x1,
Alt0 = 0x4,
Alt1 = 0x5,
Alt2 = 0x6,
Alt3 = 0x7,
Alt4 = 0x3,
Alt5 = 0x2,
};