ref: 4dbb99f478d68eaeea4c043a839454cb807c2c7d
dir: /sys/src/cmd/nusb/serial/serial.c/
/* * This part takes care of locking except for initialization and * other threads created by the hw dep. drivers. */ #include <u.h> #include <libc.h> #include <ctype.h> #include <thread.h> #include <fcall.h> #include <9p.h> #include "usb.h" #include "serial.h" int serialdebug; Serialport **ports; int nports; static void serialfatal(Serial *ser) { Serialport *p; int i; dsprint(2, "serial: fatal error, closing\n"); for(i = 0; i < ser->nifcs; i++){ p = &ser->p[i]; if(p->w4data != nil) chanclose(p->w4data); if(p->gotdata != nil) chanclose(p->gotdata); } } /* I sleep with the lock... only way to drain in general */ static void serialdrain(Serialport *p) { Serial *ser; uint baud, pipesize; ser = p->s; baud = p->baud; if(p->baud == ~0) return; if(ser->maxwtrans < 256) pipesize = 256; else pipesize = ser->maxwtrans; /* wait for the at least 256-byte pipe to clear */ sleep(10 + pipesize/((1 + baud)*1000)); if(ser->clearpipes != nil) ser->clearpipes(p); } int serialreset(Serial *ser) { Serialport *p; int i, res; res = 0; /* cmd for reset */ for(i = 0; i < ser->nifcs; i++){ p = &ser->p[i]; serialdrain(p); } if(ser->reset != nil) res = ser->reset(ser, nil); return res; } /* call this if something goes wrong, must be qlocked */ int serialrecover(Serial *ser, Serialport *p, Dev *ep, char *err) { if(p != nil) dprint(2, "serial[%d], %s: %s, level %d\n", p->interfc, p->name, err, ser->recover); else dprint(2, "serial[%s], global error, level %d\n", ser->p[0].name, ser->recover); ser->recover++; if(strstr(err, "detached") != nil) return -1; if(ser->recover < 3){ if(p != nil){ if(ep != nil){ if(ep == p->epintr) unstall(ser->dev, p->epintr, Ein); if(ep == p->epin) unstall(ser->dev, p->epin, Ein); if(ep == p->epout) unstall(ser->dev, p->epout, Eout); return 0; } if(p->epintr != nil) unstall(ser->dev, p->epintr, Ein); if(p->epin != nil) unstall(ser->dev, p->epin, Ein); if(p->epout != nil) unstall(ser->dev, p->epout, Eout); } return 0; } if(ser->recover > 4 && ser->recover < 8) serialfatal(ser); if(ser->recover > 8){ ser->reset(ser, p); return 0; } if(serialreset(ser) < 0) return -1; return 0; } static int serialctl(Serialport *p, char *cmd) { Serial *ser; int c, i, n, nf, nop, nw, par, drain, set, lines; char *f[16]; uchar x; ser = p->s; drain = set = lines = 0; nf = tokenize(cmd, f, nelem(f)); for(i = 0; i < nf; i++){ if(strncmp(f[i], "break", 5) == 0){ if(ser->setbreak != nil) ser->setbreak(p, 1); continue; } nop = 0; n = atoi(f[i]+1); c = *f[i]; if (isascii(c) && isupper(c)) c = tolower(c); switch(c){ case 'b': drain++; p->baud = n; set++; break; case 'c': p->dcd = n; // lines++; ++nop; break; case 'd': p->dtr = n; lines++; break; case 'e': p->dsr = n; // lines++; ++nop; break; case 'f': /* flush the pipes */ drain++; break; case 'h': /* hangup?? */ p->rts = p->dtr = 0; lines++; fprint(2, "serial: %c, unsure ctl\n", c); break; case 'i': ++nop; break; case 'k': drain++; ser->setbreak(p, 1); sleep(n); ser->setbreak(p, 0); break; case 'l': drain++; p->bits = n; set++; break; case 'm': drain++; if(ser->modemctl != nil) ser->modemctl(p, n); if(n == 0) p->cts = 0; break; case 'n': p->blocked = n; ++nop; break; case 'p': /* extended... */ if(strlen(f[i]) != 2) return -1; drain++; par = f[i][1]; if(par == 'n') p->parity = 0; else if(par == 'o') p->parity = 1; else if(par == 'e') p->parity = 2; else if(par == 'm') /* mark parity */ p->parity = 3; else if(par == 's') /* space parity */ p->parity = 4; else return -1; set++; break; case 'q': // drain++; p->limit = n; ++nop; break; case 'r': drain++; p->rts = n; lines++; break; case 's': drain++; p->stop = n; set++; break; case 'w': /* ?? how do I put this */ p->timer = n * 100000LL; ++nop; break; case 'x': if(n == 0) x = CTLS; else x = CTLQ; if(ser->wait4write != nil) nw = ser->wait4write(p, &x, 1); else nw = write(p->epout->dfd, &x, 1); if(nw != 1){ serialrecover(ser, p, p->epout, ""); return -1; } break; } /* * don't print. the condition is harmless and the print * splatters all over the display. */ USED(nop); if (0 && nop) fprint(2, "serial: %c, unsupported nop ctl\n", c); } if(drain) serialdrain(p); if(lines && !set){ if(ser->sendlines != nil && ser->sendlines(p) < 0) return -1; } else if(set){ if(ser->setparam != nil && ser->setparam(p) < 0) return -1; } ser->recover = 0; return 0; } char *pformat = "noems"; char * serdumpst(Serialport *p, char *buf, int bufsz) { char *e, *s; Serial *ser; ser = p->s; e = buf + bufsz; s = seprint(buf, e, "b%d ", p->baud); s = seprint(s, e, "c%d ", p->dcd); /* unimplemented */ s = seprint(s, e, "d%d ", p->dtr); s = seprint(s, e, "e%d ", p->dsr); /* unimplemented */ s = seprint(s, e, "l%d ", p->bits); s = seprint(s, e, "m%d ", p->mctl); if(p->parity >= 0 || p->parity < strlen(pformat)) s = seprint(s, e, "p%c ", pformat[p->parity]); else s = seprint(s, e, "p%c ", '?'); s = seprint(s, e, "r%d ", p->rts); s = seprint(s, e, "s%d ", p->stop); s = seprint(s, e, "i%d ", p->fifo); s = seprint(s, e, "\ndev(%d) ", 0); s = seprint(s, e, "type(%d) ", ser->type); s = seprint(s, e, "framing(%d) ", p->nframeerr); s = seprint(s, e, "overruns(%d) ", p->novererr); s = seprint(s, e, "berr(%d) ", p->nbreakerr); s = seprint(s, e, " serr(%d)\n", p->nparityerr); return s; } Cinfo* matchid(Cinfo *tab, int vid, int did) { while(tab->vid != 0){ if(tab->vid == vid && (tab->did == did || did == 0)) return tab; tab++; } return nil; } static int serinit(Serialport *p) { int res; res = 0; Serial *ser; ser = p->s; if(ser->init != nil) res = ser->init(p); if(ser->getparam != nil) ser->getparam(p); p->nframeerr = p->nparityerr = p->nbreakerr = p->novererr = 0; return res; } static void dattach(Req *req) { req->fid->qid = (Qid) {0, 0, QTDIR}; req->ofcall.qid = req->fid->qid; respond(req, nil); } static int dirgen(int n, Dir *d, void *) { if(n >= nports * 2) return -1; d->qid.path = n + 1; d->qid.vers = 0; if(n >= 0) d->qid.type = 0; else d->qid.type = QTDIR; d->uid = strdup("usb"); d->gid = strdup(d->uid); d->muid = strdup(d->uid); if(n >= 0){ d->name = smprint((n & 1) ? "%sctl" : "%s", ports[n/2]->name); d->mode = ((n & 1) ? 0664 : 0660); }else{ d->name = strdup(""); d->mode = 0555 | QTDIR; } d->atime = d->mtime = time(0); d->length = 0; return 0; } static char * dwalk(Fid *fid, char *name, Qid *qidp) { int i; int len; Qid qid; char *p; qid = fid->qid; if((qid.type & QTDIR) == 0){ return "walk in non-directory"; } if(strcmp(name, "..") == 0){ fid->qid.path = 0; fid->qid.vers = 0; fid->qid.type = QTDIR; *qidp = fid->qid; return nil; } for(i = 0; i < nports; i++) if(strncmp(name, ports[i]->name, len = strlen(ports[i]->name)) == 0){ p = name + len; if(*p == 0) fid->qid.path = 2 * i + 1; else if(strcmp(p, "ctl") == 0) fid->qid.path = 2 * i + 2; else continue; fid->qid.vers = 0; fid->qid.type = 0; *qidp = fid->qid; return nil; } return "does not exist"; } static void dstat(Req *req) { if(dirgen(req->fid->qid.path - 1, &req->d, nil) < 0) respond(req, "the front fell off"); else respond(req, nil); } static void procread(Req *req) { int count, rcount; void *data; Serial *ser; Serialport *p; char err[ERRMAX]; int dfd; p = req->aux; ser = p->s; data = req->ofcall.data; count = req->ifcall.count; Again: qlock(ser); if(count > ser->maxread) count = ser->maxread; if(ser->wait4data != nil) { rcount = ser->wait4data(p, data, count); qunlock(ser); } else { dfd = p->epin->dfd; qunlock(ser); rcount = read(dfd, data, count); } if(rcount < 0) { err[0] = 0; errstr(err, sizeof err); if(p->rq->flush == 0 && strstr(err, "timed out") != nil) goto Again; respond(req, err); } else { req->ofcall.count = rcount; respond(req, nil); } } static void procwrite(Req *req) { int count, wcount; void *data; Serial *ser; Serialport *p; char err[ERRMAX]; int dfd; p = req->aux; ser = p->s; data = req->ifcall.data; count = req->ifcall.count; qlock(ser); if(ser->wait4write != nil) { wcount = ser->wait4write(p, data, count); qunlock(ser); } else { dfd = p->epout->dfd; qunlock(ser); wcount = write(dfd, data, count); } if(wcount != count) { err[0] = 0; errstr(err, sizeof err); respond(req, err); qlock(ser); serialrecover(p->s, p, p->epout, err); qunlock(ser); } else { req->ofcall.count = wcount; respond(req, nil); } } static void dread(Req *req) { Serial *ser; Serialport *p; ulong path; path = req->fid->qid.path; if(path == 0){ dirread9p(req, dirgen, nil); respond(req, nil); return; } p = ports[(path - 1) / 2]; ser = p->s; qlock(ser); switch((path - 1) % 2){ case 0: req->aux = p; reqqueuepush(p->rq, req, procread); break; case 1: req->ofcall.count = 0; if(req->ifcall.offset == 0 && !p->isjtag){ char buf[256]; serdumpst(p, buf, sizeof buf); readstr(req, buf); } respond(req, nil); break; } qunlock(ser); } static void dwrite(Req *req) { Serial *ser; Serialport *p; ulong path; int count; path = req->fid->qid.path; p = ports[(path-1) / 2]; ser = p->s; qlock(ser); switch((path-1) % 2){ case 0: req->aux = p; reqqueuepush(p->wq, req, procwrite); break; case 1: count = req->ifcall.count; if(!p->isjtag){ char *cmd, *buf; buf = (char*)req->ifcall.data; cmd = emallocz(count+1, 1); memmove(cmd, buf, count); cmd[count] = 0; if(serialctl(p, cmd) < 0){ qunlock(ser); free(cmd); respond(req, "bad control request"); return; } free(cmd); } req->ofcall.count = count; respond(req, nil); break; } qunlock(ser); } static int openeps(Serialport *p, Ep *epin, Ep *epout, Ep *epintr) { Serial *ser; ser = p->s; p->epin = openep(ser->dev, epin); if(p->epin == nil){ fprint(2, "serial: openep %d: %r\n", epin->id); return -1; } if(epin == epout){ incref(p->epin); p->epout = p->epin; } else p->epout = openep(ser->dev, epout); if(p->epout == nil){ fprint(2, "serial: openep %d: %r\n", epout->id); closedev(p->epin); return -1; } if(ser->hasepintr){ p->epintr = openep(ser->dev, epintr); if(p->epintr == nil){ fprint(2, "serial: openep %d: %r\n", epintr->id); closedev(p->epin); closedev(p->epout); return -1; } opendevdata(p->epintr, OREAD); devctl(p->epintr, "timeout 1000"); } if(ser->seteps != nil) ser->seteps(p); if(p->epin == p->epout) opendevdata(p->epin, ORDWR); else { opendevdata(p->epin, OREAD); opendevdata(p->epout, OWRITE); } if(p->epin->dfd < 0 || p->epout->dfd < 0 || (ser->hasepintr && p->epintr->dfd < 0)){ fprint(2, "serial: open i/o ep data: %r\n"); closedev(p->epin); closedev(p->epout); if(ser->hasepintr) closedev(p->epintr); return -1; } return 0; } static int findendpoints(Serial *ser, int ifc) { Ep **eps, *ep, *epin, *epout, *epintr; int i; /* * interfc 0 means start from the start which is equiv to * iterate through endpoints probably, could be done better */ eps = ser->dev->usb->conf[0]->iface[ifc]->ep; epintr = epin = epout = nil; for(i = 0; i < Nep; i++){ if((ep = eps[i]) == nil) break; if(ser->hasepintr && ep->type == Eintr && ep->dir == Ein && epintr == nil) epintr = ep; if(ep->type == Ebulk){ if((ep->dir == Ein || ep->dir == Eboth) && epin == nil) epin = ep; if((ep->dir == Eout || ep->dir == Eboth) && epout == nil) epout = ep; } } if(epin == nil || epout == nil || (ser->hasepintr && epintr == nil)) return -1; dprint(2, "serial[%d]: ep ids: in %d out %d intr %d\n", ifc, epin->id, epout->id, epintr!=nil?epintr->id:-1); if(openeps(&ser->p[ifc], epin, epout, epintr) < 0) return -1; dprint(2, "serial: ep in %s out %s\n", ser->p[ifc].epin->dir, ser->p[ifc].epout->dir); if(ser->hasepintr) dprint(2, "serial: ep intr %s\n", ser->p[ifc].epintr->dir); if(usbdebug > 1 || serialdebug > 2){ devctl(ser->p[ifc].epin, "debug 1"); devctl(ser->p[ifc].epout, "debug 1"); if(ser->hasepintr) devctl(ser->p[ifc].epintr, "debug 1"); devctl(ser->dev, "debug 1"); } return 0; } static void dflush(Req *req) { Serialport *p; Req *old; ulong path; old = req->oldreq; path = old->fid->qid.path; if(path != 0){ p = ports[(path - 1) / 2]; if(p != nil){ if(old->ifcall.type == Twrite) reqqueueflush(p->wq, old); else reqqueueflush(p->rq, old); } } respond(req, nil); } /* keep in sync with main.c */ static void usage(void) { fprint(2, "usage: %s [-d] devid\n", argv0); threadexitsall("usage"); } static void dend(Srv*) { threadexitsall(nil); } static Srv serialfs = { .attach = dattach, .walk1 = dwalk, .read = dread, .write= dwrite, .stat = dstat, .flush = dflush, .end = dend, }; extern int ftprobe(Serial *ser); extern int plprobe(Serial *ser); extern int slprobe(Serial *ser); extern int chprobe(Serial *ser); extern int uconsprobe(Serial *ser); void threadmain(int argc, char* argv[]) { Serial *ser; Dev *dev; char buf[50]; Serialport *p; int i; ARGBEGIN{ case 'd': usbdebug++; serialdebug++; break; default: usage(); }ARGEND if(argc != 1) usage(); dev = getdev(*argv); if(dev == nil) sysfatal("getdev: %r"); ser = dev->aux = emallocz(sizeof(Serial), 1); ser->maxrtrans = ser->maxwtrans = sizeof ser->p[0].data; ser->maxread = ser->maxwrite = sizeof ser->p[0].data; ser->dev = dev; ser->jtag = -1; ser->nifcs = 1; /* probe all the drivers */ if(uconsprobe(ser) && ftprobe(ser) && slprobe(ser) && plprobe(ser) && chprobe(ser)) sysfatal("no serial devices found"); for(i = 0; i < ser->nifcs; i++){ p = &ser->p[i]; p->baud = ~0; p->interfc = i; p->s = ser; if(i == ser->jtag) p->isjtag++; if(findendpoints(ser, i) < 0) sysfatal("no endpoints found for ifc %d", i); p->w4data = chancreate(sizeof(ulong), 0); p->gotdata = chancreate(sizeof(ulong), 0); } qlock(ser); serialreset(ser); for(i = 0; i < ser->nifcs; i++){ p = &ser->p[i]; if(serinit(p) < 0) sysfatal("serinit: %r"); if(ser->nifcs == 1) snprint(p->name, sizeof p->name, "%s%s", p->isjtag ? "jtag" : "eiaU", dev->hname); else snprint(p->name, sizeof p->name, "%s%s.%d", p->isjtag ? "jtag" : "eiaU", dev->hname, i); p->rq = reqqueuecreate(); p->wq = reqqueuecreate(); ports = realloc(ports, (nports + 1) * sizeof(Serialport*)); ports[nports++] = p; } qunlock(ser); snprint(buf, sizeof buf, "%d.serial", dev->id); threadpostsharesrv(&serialfs, nil, "usb", buf); threadexits(nil); }