shithub: riscv

ref: 51f76ae999813bdbf33b06bb4e6c6c8b00f4aec8
dir: /sys/lib/ghostscript/ps2epsi.ps/

View raw version
%    Copyright (C) 1990, 2000 Aladdin Enterprises.  All rights reserved.
% 
% This software is provided AS-IS with no warranty, either express or
% implied.
% 
% This software is distributed under license and may not be copied,
% modified or distributed except as expressly authorized under the terms
% of the license contained in the file LICENSE in this distribution.
% 
% For more information about licensing, please refer to
% http://www.ghostscript.com/licensing/. For information on
% commercial licensing, go to http://www.artifex.com/licensing/ or
% contact Artifex Software, Inc., 101 Lucas Valley Road #110,
% San Rafael, CA  94903, U.S.A., +1(415)492-9861.

% $Id: ps2epsi.ps,v 1.10 2003/05/07 16:37:17 ray Exp $
% Convert an arbitrary PostScript file to an EPSI file.
%
% Please do not contact these users if you have questions.  They no longer
% have the time, interest, or current expertise to keep this code working.
% If you find bugs, please send proposed fixes to [email protected].
%
% Bug fix 2002-04-20 by rayjj: Bounding box was incorrect since it depended
%   on the dither pattern and gray shade at the boundary. Changed to use
%   8-bit grayscale preview image to allow correct bounding box (at the
%   expense of a 8x larger preview image). Also moved .setsafe until after
%   the device and file operations are complete (but still before the input
%   file is processed.
% Bug fix 2000-04-11 by lpd: if a font didn't have a FontName (which is the
%   case for bitmap fonts produced by recent versions of dvips), setfont
%   caused an error.
% Bug fix 8/21/99 by lpd: many of the margin and width computations were
%   wrong (off by 1).  The code only "worked" because the bugs were
%   (mostly) in conservative directions.
% Modified 3/17/98 by lpd to make it possible to run this file without
%   running the ps2epsi script first, for debugging.
% Bug fix 9/29/97 by lpd <[email protected]>: if the page size wasn't an
%   exact multiple of 8 bits, an incorrect bounding box (or a rangecheck
%   error) could occur.
% Patched 7/26/95 by
%	Greg P. Kochanski <[email protected]>
%   to add many new DSC comments and make the comments conforming.
% Original version contributed by
%	George Cameron <[email protected]>
%

% Initialize, and redefine copypage and showpage.

% ps2edict is normally defined in the pre-loaded code created by the
% ps2epsi script.
/ps2edict where { pop } { /ps2edict 25 dict def } ifelse
ps2edict begin

				% The main procedure
  /ps2epsi
   {				% Open the file
     outfile (w) file /epsifile exch def
					% Get the device parameters
     currentdevice getdeviceprops .dicttomark 
     /HWSize get aload pop
       /devheight exch def
       /devwidth exch def
     matrix defaultmatrix
       /devmatrix exch def
				% Make a corresponding 8-bit deep memory device
     devmatrix devwidth devheight
     256 string 0 1 255 { 1 index exch dup 255 exch sub put } for
     makeimagedevice
     /arraydevice exch def
     arraydevice
     % Turn on anti-aliasing
     mark /TextAlphaBits 4 /GraphicsAlphaBits 4 6 -1 roll
     putdeviceprops
     setdevice	% (does an erasepage)
     /rowwidth devwidth def
     /row rowwidth string def
     /zerorow rowwidth string def	% all zero
				% Replace the definition of showpage
     userdict /showpage { ps2edict begin epsipage end } bind put
     userdict /setfont { ps2edict begin epsisetfont end } bind put
     //systemdict /.setsafe known { .setsafe } if
   } bind def

 /epsifontdict 100 dict def

 /epsisetfont
 {
 % code here keeps a list of font names in dictionary epsifontdict
 /tmpfont exch def
 tmpfont /FontName known {
   /tmpfontname tmpfont /FontName get def
   epsifontdict tmpfontname known not { epsifontdict tmpfontname 0 put } if
   epsifontdict tmpfontname 2 copy get 1 add put
 } if
 tmpfont setfont
 } bind def

% Get a scan line from the memory device, zeroing any bits beyond
% the device width.
/getscanline {		% <device> <y> <string> getscanline <string>
  dup 4 1 roll copyscanlines pop
  16#ff00 devwidth 7 and neg bitshift 255 and
  dup 0 ne {
    1 index dup length 1 sub 2 copy get 4 -1 roll and put
  } {
    pop
  } ifelse
} bind def

/margintest {		% <y-start> <step> <y-limit> margintest <y-non-blank>
			% <y-start> <step> <y-limit> margintest -
  { dup arraydevice exch row getscanline
    zerorow ne { exit } if pop
  } for
} bind def


  /epsiNameStr 200 string def
  /epsiNpages 0 def
  /epsiNpageStr 20 string def
  /epsipage
   {      
     /epsiNpages epsiNpages 1 add def
     /loopcount devheight 1 sub def

     % Find top margin -- minimum Y of non-blank scan line.
     -1 0 1 loopcount margintest
     dup -1 eq { (blank page!!\n) print quit }{ exch pop } ifelse 
     /tm exch def

     % Find bottom margin -- maximum Y of non-blank scan line.
     loopcount -1 0 margintest
     /bm exch def
     
     % Initialise limit variables
     /loopcount rowwidth 1 sub def
     /lm loopcount def 
     /rm 0 def 

     % Find left and right boundaries of image
     tm 1 bm
      { % Get more data
	arraydevice exch row getscanline pop
	% Scan from left to find first non-zero element
	% We save first the element, then the index
	-1 0 1 loopcount
	{ dup row exch get 0 ne { exch pop exit }{ pop } ifelse
	} for
	% If we found -1, row is blank ..
	dup -1 ne 
	{ % Find the leftmost index
          dup lm lt
          % If the new index is less, we save index and element
          { /lm exch def } { pop } ifelse
	  % Now find the rightmost index
	  loopcount -1 0
          { dup row exch get 0 ne { exit }{ pop } ifelse
          } for
	  dup rm gt
          % If the new index is greater, we save index and element
          { /rm exch def } { pop } ifelse
	} if
      } for

     % Calculate the bounding box values.
     % Note that these must be corrected to produce closed-open intervals.
     /llx lm def
     /lly devheight bm sub 1 sub def
     /urx rm 1 add def
     /ury devheight tm sub def

    % Write out the magic string and bounding box information
     epsifile (%!PS-Adobe-2.0 EPSF-1.2\n) writestring
	 /epsititle where { pop epsifile epsititle writestring } if
	 /epsicreator where { pop epsifile epsicreator writestring } if
	 /epsicrdt where { pop epsifile epsicrdt writestring } if
	 /epsifor where { pop epsifile epsifor writestring } if
     epsifile flushfile

	% Write out the page count:
	 epsifile (%%Pages: ) writestring
	 epsifile epsiNpages epsiNpageStr cvs writestring
	 epsifile (\n) writestring
     epsifile flushfile

	% Write out the list of used fonts:
	 epsifile (%%DocumentFonts:) writestring
	 epsifontdict {
					epsifile ( ) writestring
					pop epsiNameStr cvs epsifile exch writestring
					} forall
	 epsifile (\n) writestring
     epsifile flushfile

     epsifile (%%BoundingBox: ) writestring
     epsifile llx write==only epsifile ( ) writestring
     epsifile lly write==only epsifile ( ) writestring
     epsifile urx write==only epsifile ( ) writestring
     epsifile ury write==

    % Define character and bit widths for the output line buffer:
     /cwidth rm lm sub 1 add def
     /out cwidth string def

     epsifile (%%EndComments\n\n) writestring
     epsifile (%%BeginProlog\n) writestring
     epsifile (%%BeginPreview: ) writestring
     epsifile cwidth write==only epsifile ( ) writestring
     epsifile bm tm sub 1 add write==only epsifile ( 8 ) writestring
     epsifile bm tm sub 1 add
     cwidth 39 add 40 idiv mul write==
     epsifile flushfile

     gsave

     tm 1 bm
      { % Get a scan line interval from the array device
	arraydevice exch row copyscanlines lm cwidth getinterval
	% Write out the hex data as 40 bytes per line (82 chars)
	0 40 cwidth
	 { epsifile (% ) writestring 
	   epsifile exch 2 index exch
	   dup cwidth exch sub 40 .min getinterval writehexstring
	   epsifile (\n) writestring
	 } for
        pop
      } for

     epsifile (%%EndImage\n) writestring
     epsifile (%%EndPreview\n) writestring
     epsifile flushfile
     grestore
     erasepage initgraphics

     DonePage 0 1 put
   } bind def


(outfile) getenv
  { /outfile exch def 
    ps2epsi

    /DonePage 1 string def
    (%stdin) (r) file cvx execute0
    DonePage 0 get 0 eq { showpage } if
  } if

end
quit