ref: 68f15d65942da7e30cf9cbae7362f778fe5da1d2
dir: /sys/src/cmd/python/Doc/lib/libdoctest.tex/
\section{\module{doctest} ---
Test interactive Python examples}
\declaremodule{standard}{doctest}
\moduleauthor{Tim Peters}{[email protected]}
\sectionauthor{Tim Peters}{[email protected]}
\sectionauthor{Moshe Zadka}{[email protected]}
\sectionauthor{Edward Loper}{[email protected]}
\modulesynopsis{A framework for verifying interactive Python examples.}
The \refmodule{doctest} module searches for pieces of text that look like
interactive Python sessions, and then executes those sessions to
verify that they work exactly as shown. There are several common ways to
use doctest:
\begin{itemize}
\item To check that a module's docstrings are up-to-date by verifying
that all interactive examples still work as documented.
\item To perform regression testing by verifying that interactive
examples from a test file or a test object work as expected.
\item To write tutorial documentation for a package, liberally
illustrated with input-output examples. Depending on whether
the examples or the expository text are emphasized, this has
the flavor of "literate testing" or "executable documentation".
\end{itemize}
Here's a complete but small example module:
\begin{verbatim}
"""
This is the "example" module.
The example module supplies one function, factorial(). For example,
>>> factorial(5)
120
"""
def factorial(n):
"""Return the factorial of n, an exact integer >= 0.
If the result is small enough to fit in an int, return an int.
Else return a long.
>>> [factorial(n) for n in range(6)]
[1, 1, 2, 6, 24, 120]
>>> [factorial(long(n)) for n in range(6)]
[1, 1, 2, 6, 24, 120]
>>> factorial(30)
265252859812191058636308480000000L
>>> factorial(30L)
265252859812191058636308480000000L
>>> factorial(-1)
Traceback (most recent call last):
...
ValueError: n must be >= 0
Factorials of floats are OK, but the float must be an exact integer:
>>> factorial(30.1)
Traceback (most recent call last):
...
ValueError: n must be exact integer
>>> factorial(30.0)
265252859812191058636308480000000L
It must also not be ridiculously large:
>>> factorial(1e100)
Traceback (most recent call last):
...
OverflowError: n too large
"""
\end{verbatim}
% allow LaTeX to break here.
\begin{verbatim}
import math
if not n >= 0:
raise ValueError("n must be >= 0")
if math.floor(n) != n:
raise ValueError("n must be exact integer")
if n+1 == n: # catch a value like 1e300
raise OverflowError("n too large")
result = 1
factor = 2
while factor <= n:
result *= factor
factor += 1
return result
def _test():
import doctest
doctest.testmod()
if __name__ == "__main__":
_test()
\end{verbatim}
If you run \file{example.py} directly from the command line,
\refmodule{doctest} works its magic:
\begin{verbatim}
$ python example.py
$
\end{verbatim}
There's no output! That's normal, and it means all the examples
worked. Pass \programopt{-v} to the script, and \refmodule{doctest}
prints a detailed log of what it's trying, and prints a summary at the
end:
\begin{verbatim}
$ python example.py -v
Trying:
factorial(5)
Expecting:
120
ok
Trying:
[factorial(n) for n in range(6)]
Expecting:
[1, 1, 2, 6, 24, 120]
ok
Trying:
[factorial(long(n)) for n in range(6)]
Expecting:
[1, 1, 2, 6, 24, 120]
ok
\end{verbatim}
And so on, eventually ending with:
\begin{verbatim}
Trying:
factorial(1e100)
Expecting:
Traceback (most recent call last):
...
OverflowError: n too large
ok
1 items had no tests:
__main__._test
2 items passed all tests:
1 tests in __main__
8 tests in __main__.factorial
9 tests in 3 items.
9 passed and 0 failed.
Test passed.
$
\end{verbatim}
That's all you need to know to start making productive use of
\refmodule{doctest}! Jump in. The following sections provide full
details. Note that there are many examples of doctests in
the standard Python test suite and libraries. Especially useful examples
can be found in the standard test file \file{Lib/test/test_doctest.py}.
\subsection{Simple Usage: Checking Examples in
Docstrings\label{doctest-simple-testmod}}
The simplest way to start using doctest (but not necessarily the way
you'll continue to do it) is to end each module \module{M} with:
\begin{verbatim}
def _test():
import doctest
doctest.testmod()
if __name__ == "__main__":
_test()
\end{verbatim}
\refmodule{doctest} then examines docstrings in module \module{M}.
Running the module as a script causes the examples in the docstrings
to get executed and verified:
\begin{verbatim}
python M.py
\end{verbatim}
This won't display anything unless an example fails, in which case the
failing example(s) and the cause(s) of the failure(s) are printed to stdout,
and the final line of output is
\samp{***Test Failed*** \var{N} failures.}, where \var{N} is the
number of examples that failed.
Run it with the \programopt{-v} switch instead:
\begin{verbatim}
python M.py -v
\end{verbatim}
and a detailed report of all examples tried is printed to standard
output, along with assorted summaries at the end.
You can force verbose mode by passing \code{verbose=True} to
\function{testmod()}, or
prohibit it by passing \code{verbose=False}. In either of those cases,
\code{sys.argv} is not examined by \function{testmod()} (so passing
\programopt{-v} or not has no effect).
For more information on \function{testmod()}, see
section~\ref{doctest-basic-api}.
\subsection{Simple Usage: Checking Examples in a Text
File\label{doctest-simple-testfile}}
Another simple application of doctest is testing interactive examples
in a text file. This can be done with the \function{testfile()}
function:
\begin{verbatim}
import doctest
doctest.testfile("example.txt")
\end{verbatim}
That short script executes and verifies any interactive Python
examples contained in the file \file{example.txt}. The file content
is treated as if it were a single giant docstring; the file doesn't
need to contain a Python program! For example, perhaps \file{example.txt}
contains this:
\begin{verbatim}
The ``example`` module
======================
Using ``factorial``
-------------------
This is an example text file in reStructuredText format. First import
``factorial`` from the ``example`` module:
>>> from example import factorial
Now use it:
>>> factorial(6)
120
\end{verbatim}
Running \code{doctest.testfile("example.txt")} then finds the error
in this documentation:
\begin{verbatim}
File "./example.txt", line 14, in example.txt
Failed example:
factorial(6)
Expected:
120
Got:
720
\end{verbatim}
As with \function{testmod()}, \function{testfile()} won't display anything
unless an example fails. If an example does fail, then the failing
example(s) and the cause(s) of the failure(s) are printed to stdout, using
the same format as \function{testmod()}.
By default, \function{testfile()} looks for files in the calling
module's directory. See section~\ref{doctest-basic-api} for a
description of the optional arguments that can be used to tell it to
look for files in other locations.
Like \function{testmod()}, \function{testfile()}'s verbosity can be
set with the \programopt{-v} command-line switch or with the optional
keyword argument \var{verbose}.
For more information on \function{testfile()}, see
section~\ref{doctest-basic-api}.
\subsection{How It Works\label{doctest-how-it-works}}
This section examines in detail how doctest works: which docstrings it
looks at, how it finds interactive examples, what execution context it
uses, how it handles exceptions, and how option flags can be used to
control its behavior. This is the information that you need to know
to write doctest examples; for information about actually running
doctest on these examples, see the following sections.
\subsubsection{Which Docstrings Are Examined?\label{doctest-which-docstrings}}
The module docstring, and all function, class and method docstrings are
searched. Objects imported into the module are not searched.
In addition, if \code{M.__test__} exists and "is true", it must be a
dict, and each entry maps a (string) name to a function object, class
object, or string. Function and class object docstrings found from
\code{M.__test__} are searched, and strings are treated as if they
were docstrings. In output, a key \code{K} in \code{M.__test__} appears
with name
\begin{verbatim}
<name of M>.__test__.K
\end{verbatim}
Any classes found are recursively searched similarly, to test docstrings in
their contained methods and nested classes.
\versionchanged[A "private name" concept is deprecated and no longer
documented]{2.4}
\subsubsection{How are Docstring Examples
Recognized?\label{doctest-finding-examples}}
In most cases a copy-and-paste of an interactive console session works
fine, but doctest isn't trying to do an exact emulation of any specific
Python shell. All hard tab characters are expanded to spaces, using
8-column tab stops. If you don't believe tabs should mean that, too
bad: don't use hard tabs, or write your own \class{DocTestParser}
class.
\versionchanged[Expanding tabs to spaces is new; previous versions
tried to preserve hard tabs, with confusing results]{2.4}
\begin{verbatim}
>>> # comments are ignored
>>> x = 12
>>> x
12
>>> if x == 13:
... print "yes"
... else:
... print "no"
... print "NO"
... print "NO!!!"
...
no
NO
NO!!!
>>>
\end{verbatim}
Any expected output must immediately follow the final
\code{'>>>~'} or \code{'...~'} line containing the code, and
the expected output (if any) extends to the next \code{'>>>~'}
or all-whitespace line.
The fine print:
\begin{itemize}
\item Expected output cannot contain an all-whitespace line, since such a
line is taken to signal the end of expected output. If expected
output does contain a blank line, put \code{<BLANKLINE>} in your
doctest example each place a blank line is expected.
\versionchanged[\code{<BLANKLINE>} was added; there was no way to
use expected output containing empty lines in
previous versions]{2.4}
\item Output to stdout is captured, but not output to stderr (exception
tracebacks are captured via a different means).
\item If you continue a line via backslashing in an interactive session,
or for any other reason use a backslash, you should use a raw
docstring, which will preserve your backslashes exactly as you type
them:
\begin{verbatim}
>>> def f(x):
... r'''Backslashes in a raw docstring: m\n'''
>>> print f.__doc__
Backslashes in a raw docstring: m\n
\end{verbatim}
Otherwise, the backslash will be interpreted as part of the string.
For example, the "{\textbackslash}" above would be interpreted as a
newline character. Alternatively, you can double each backslash in the
doctest version (and not use a raw string):
\begin{verbatim}
>>> def f(x):
... '''Backslashes in a raw docstring: m\\n'''
>>> print f.__doc__
Backslashes in a raw docstring: m\n
\end{verbatim}
\item The starting column doesn't matter:
\begin{verbatim}
>>> assert "Easy!"
>>> import math
>>> math.floor(1.9)
1.0
\end{verbatim}
and as many leading whitespace characters are stripped from the
expected output as appeared in the initial \code{'>>>~'} line
that started the example.
\end{itemize}
\subsubsection{What's the Execution Context?\label{doctest-execution-context}}
By default, each time \refmodule{doctest} finds a docstring to test, it
uses a \emph{shallow copy} of \module{M}'s globals, so that running tests
doesn't change the module's real globals, and so that one test in
\module{M} can't leave behind crumbs that accidentally allow another test
to work. This means examples can freely use any names defined at top-level
in \module{M}, and names defined earlier in the docstring being run.
Examples cannot see names defined in other docstrings.
You can force use of your own dict as the execution context by passing
\code{globs=your_dict} to \function{testmod()} or
\function{testfile()} instead.
\subsubsection{What About Exceptions?\label{doctest-exceptions}}
No problem, provided that the traceback is the only output produced by
the example: just paste in the traceback.\footnote{Examples containing
both expected output and an exception are not supported. Trying
to guess where one ends and the other begins is too error-prone,
and that also makes for a confusing test.}
Since tracebacks contain details that are likely to change rapidly (for
example, exact file paths and line numbers), this is one case where doctest
works hard to be flexible in what it accepts.
Simple example:
\begin{verbatim}
>>> [1, 2, 3].remove(42)
Traceback (most recent call last):
File "<stdin>", line 1, in ?
ValueError: list.remove(x): x not in list
\end{verbatim}
That doctest succeeds if \exception{ValueError} is raised, with the
\samp{list.remove(x): x not in list} detail as shown.
The expected output for an exception must start with a traceback
header, which may be either of the following two lines, indented the
same as the first line of the example:
\begin{verbatim}
Traceback (most recent call last):
Traceback (innermost last):
\end{verbatim}
The traceback header is followed by an optional traceback stack, whose
contents are ignored by doctest. The traceback stack is typically
omitted, or copied verbatim from an interactive session.
The traceback stack is followed by the most interesting part: the
line(s) containing the exception type and detail. This is usually the
last line of a traceback, but can extend across multiple lines if the
exception has a multi-line detail:
\begin{verbatim}
>>> raise ValueError('multi\n line\ndetail')
Traceback (most recent call last):
File "<stdin>", line 1, in ?
ValueError: multi
line
detail
\end{verbatim}
The last three lines (starting with \exception{ValueError}) are
compared against the exception's type and detail, and the rest are
ignored.
Best practice is to omit the traceback stack, unless it adds
significant documentation value to the example. So the last example
is probably better as:
\begin{verbatim}
>>> raise ValueError('multi\n line\ndetail')
Traceback (most recent call last):
...
ValueError: multi
line
detail
\end{verbatim}
Note that tracebacks are treated very specially. In particular, in the
rewritten example, the use of \samp{...} is independent of doctest's
\constant{ELLIPSIS} option. The ellipsis in that example could be left
out, or could just as well be three (or three hundred) commas or digits,
or an indented transcript of a Monty Python skit.
Some details you should read once, but won't need to remember:
\begin{itemize}
\item Doctest can't guess whether your expected output came from an
exception traceback or from ordinary printing. So, e.g., an example
that expects \samp{ValueError: 42 is prime} will pass whether
\exception{ValueError} is actually raised or if the example merely
prints that traceback text. In practice, ordinary output rarely begins
with a traceback header line, so this doesn't create real problems.
\item Each line of the traceback stack (if present) must be indented
further than the first line of the example, \emph{or} start with a
non-alphanumeric character. The first line following the traceback
header indented the same and starting with an alphanumeric is taken
to be the start of the exception detail. Of course this does the
right thing for genuine tracebacks.
\item When the \constant{IGNORE_EXCEPTION_DETAIL} doctest option is
is specified, everything following the leftmost colon is ignored.
\item The interactive shell omits the traceback header line for some
\exception{SyntaxError}s. But doctest uses the traceback header
line to distinguish exceptions from non-exceptions. So in the rare
case where you need to test a \exception{SyntaxError} that omits the
traceback header, you will need to manually add the traceback header
line to your test example.
\item For some \exception{SyntaxError}s, Python displays the character
position of the syntax error, using a \code{\^} marker:
\begin{verbatim}
>>> 1 1
File "<stdin>", line 1
1 1
^
SyntaxError: invalid syntax
\end{verbatim}
Since the lines showing the position of the error come before the
exception type and detail, they are not checked by doctest. For
example, the following test would pass, even though it puts the
\code{\^} marker in the wrong location:
\begin{verbatim}
>>> 1 1
Traceback (most recent call last):
File "<stdin>", line 1
1 1
^
SyntaxError: invalid syntax
\end{verbatim}
\end{itemize}
\versionchanged[The ability to handle a multi-line exception detail,
and the \constant{IGNORE_EXCEPTION_DETAIL} doctest option,
were added]{2.4}
\subsubsection{Option Flags and Directives\label{doctest-options}}
A number of option flags control various aspects of doctest's
behavior. Symbolic names for the flags are supplied as module constants,
which can be or'ed together and passed to various functions. The names
can also be used in doctest directives (see below).
The first group of options define test semantics, controlling
aspects of how doctest decides whether actual output matches an
example's expected output:
\begin{datadesc}{DONT_ACCEPT_TRUE_FOR_1}
By default, if an expected output block contains just \code{1},
an actual output block containing just \code{1} or just
\code{True} is considered to be a match, and similarly for \code{0}
versus \code{False}. When \constant{DONT_ACCEPT_TRUE_FOR_1} is
specified, neither substitution is allowed. The default behavior
caters to that Python changed the return type of many functions
from integer to boolean; doctests expecting "little integer"
output still work in these cases. This option will probably go
away, but not for several years.
\end{datadesc}
\begin{datadesc}{DONT_ACCEPT_BLANKLINE}
By default, if an expected output block contains a line
containing only the string \code{<BLANKLINE>}, then that line
will match a blank line in the actual output. Because a
genuinely blank line delimits the expected output, this is
the only way to communicate that a blank line is expected. When
\constant{DONT_ACCEPT_BLANKLINE} is specified, this substitution
is not allowed.
\end{datadesc}
\begin{datadesc}{NORMALIZE_WHITESPACE}
When specified, all sequences of whitespace (blanks and newlines) are
treated as equal. Any sequence of whitespace within the expected
output will match any sequence of whitespace within the actual output.
By default, whitespace must match exactly.
\constant{NORMALIZE_WHITESPACE} is especially useful when a line
of expected output is very long, and you want to wrap it across
multiple lines in your source.
\end{datadesc}
\begin{datadesc}{ELLIPSIS}
When specified, an ellipsis marker (\code{...}) in the expected output
can match any substring in the actual output. This includes
substrings that span line boundaries, and empty substrings, so it's
best to keep usage of this simple. Complicated uses can lead to the
same kinds of "oops, it matched too much!" surprises that \regexp{.*}
is prone to in regular expressions.
\end{datadesc}
\begin{datadesc}{IGNORE_EXCEPTION_DETAIL}
When specified, an example that expects an exception passes if
an exception of the expected type is raised, even if the exception
detail does not match. For example, an example expecting
\samp{ValueError: 42} will pass if the actual exception raised is
\samp{ValueError: 3*14}, but will fail, e.g., if
\exception{TypeError} is raised.
Note that a similar effect can be obtained using \constant{ELLIPSIS},
and \constant{IGNORE_EXCEPTION_DETAIL} may go away when Python releases
prior to 2.4 become uninteresting. Until then,
\constant{IGNORE_EXCEPTION_DETAIL} is the only clear way to write a
doctest that doesn't care about the exception detail yet continues
to pass under Python releases prior to 2.4 (doctest directives
appear to be comments to them). For example,
\begin{verbatim}
>>> (1, 2)[3] = 'moo' #doctest: +IGNORE_EXCEPTION_DETAIL
Traceback (most recent call last):
File "<stdin>", line 1, in ?
TypeError: object doesn't support item assignment
\end{verbatim}
passes under Python 2.4 and Python 2.3. The detail changed in 2.4,
to say "does not" instead of "doesn't".
\end{datadesc}
\begin{datadesc}{SKIP}
When specified, do not run the example at all. This can be useful
in contexts where doctest examples serve as both documentation and
test cases, and an example should be included for documentation
purposes, but should not be checked. E.g., the example's output
might be random; or the example might depend on resources which
would be unavailable to the test driver.
The SKIP flag can also be used for temporarily "commenting out"
examples.
\end{datadesc}
\begin{datadesc}{COMPARISON_FLAGS}
A bitmask or'ing together all the comparison flags above.
\end{datadesc}
The second group of options controls how test failures are reported:
\begin{datadesc}{REPORT_UDIFF}
When specified, failures that involve multi-line expected and
actual outputs are displayed using a unified diff.
\end{datadesc}
\begin{datadesc}{REPORT_CDIFF}
When specified, failures that involve multi-line expected and
actual outputs will be displayed using a context diff.
\end{datadesc}
\begin{datadesc}{REPORT_NDIFF}
When specified, differences are computed by \code{difflib.Differ},
using the same algorithm as the popular \file{ndiff.py} utility.
This is the only method that marks differences within lines as
well as across lines. For example, if a line of expected output
contains digit \code{1} where actual output contains letter \code{l},
a line is inserted with a caret marking the mismatching column
positions.
\end{datadesc}
\begin{datadesc}{REPORT_ONLY_FIRST_FAILURE}
When specified, display the first failing example in each doctest,
but suppress output for all remaining examples. This will prevent
doctest from reporting correct examples that break because of
earlier failures; but it might also hide incorrect examples that
fail independently of the first failure. When
\constant{REPORT_ONLY_FIRST_FAILURE} is specified, the remaining
examples are still run, and still count towards the total number of
failures reported; only the output is suppressed.
\end{datadesc}
\begin{datadesc}{REPORTING_FLAGS}
A bitmask or'ing together all the reporting flags above.
\end{datadesc}
"Doctest directives" may be used to modify the option flags for
individual examples. Doctest directives are expressed as a special
Python comment following an example's source code:
\begin{productionlist}[doctest]
\production{directive}
{"\#" "doctest:" \token{directive_options}}
\production{directive_options}
{\token{directive_option} ("," \token{directive_option})*}
\production{directive_option}
{\token{on_or_off} \token{directive_option_name}}
\production{on_or_off}
{"+" | "-"}
\production{directive_option_name}
{"DONT_ACCEPT_BLANKLINE" | "NORMALIZE_WHITESPACE" | ...}
\end{productionlist}
Whitespace is not allowed between the \code{+} or \code{-} and the
directive option name. The directive option name can be any of the
option flag names explained above.
An example's doctest directives modify doctest's behavior for that
single example. Use \code{+} to enable the named behavior, or
\code{-} to disable it.
For example, this test passes:
\begin{verbatim}
>>> print range(20) #doctest: +NORMALIZE_WHITESPACE
[0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
10, 11, 12, 13, 14, 15, 16, 17, 18, 19]
\end{verbatim}
Without the directive it would fail, both because the actual output
doesn't have two blanks before the single-digit list elements, and
because the actual output is on a single line. This test also passes,
and also requires a directive to do so:
\begin{verbatim}
>>> print range(20) # doctest:+ELLIPSIS
[0, 1, ..., 18, 19]
\end{verbatim}
Multiple directives can be used on a single physical line, separated
by commas:
\begin{verbatim}
>>> print range(20) # doctest: +ELLIPSIS, +NORMALIZE_WHITESPACE
[0, 1, ..., 18, 19]
\end{verbatim}
If multiple directive comments are used for a single example, then
they are combined:
\begin{verbatim}
>>> print range(20) # doctest: +ELLIPSIS
... # doctest: +NORMALIZE_WHITESPACE
[0, 1, ..., 18, 19]
\end{verbatim}
As the previous example shows, you can add \samp{...} lines to your
example containing only directives. This can be useful when an
example is too long for a directive to comfortably fit on the same
line:
\begin{verbatim}
>>> print range(5) + range(10,20) + range(30,40) + range(50,60)
... # doctest: +ELLIPSIS
[0, ..., 4, 10, ..., 19, 30, ..., 39, 50, ..., 59]
\end{verbatim}
Note that since all options are disabled by default, and directives apply
only to the example they appear in, enabling options (via \code{+} in a
directive) is usually the only meaningful choice. However, option flags
can also be passed to functions that run doctests, establishing different
defaults. In such cases, disabling an option via \code{-} in a directive
can be useful.
\versionchanged[Constants \constant{DONT_ACCEPT_BLANKLINE},
\constant{NORMALIZE_WHITESPACE}, \constant{ELLIPSIS},
\constant{IGNORE_EXCEPTION_DETAIL},
\constant{REPORT_UDIFF}, \constant{REPORT_CDIFF},
\constant{REPORT_NDIFF}, \constant{REPORT_ONLY_FIRST_FAILURE},
\constant{COMPARISON_FLAGS} and \constant{REPORTING_FLAGS}
were added; by default \code{<BLANKLINE>} in expected output
matches an empty line in actual output; and doctest directives
were added]{2.4}
\versionchanged[Constant \constant{SKIP} was added]{2.5}
There's also a way to register new option flag names, although this
isn't useful unless you intend to extend \refmodule{doctest} internals
via subclassing:
\begin{funcdesc}{register_optionflag}{name}
Create a new option flag with a given name, and return the new
flag's integer value. \function{register_optionflag()} can be
used when subclassing \class{OutputChecker} or
\class{DocTestRunner} to create new options that are supported by
your subclasses. \function{register_optionflag} should always be
called using the following idiom:
\begin{verbatim}
MY_FLAG = register_optionflag('MY_FLAG')
\end{verbatim}
\versionadded{2.4}
\end{funcdesc}
\subsubsection{Warnings\label{doctest-warnings}}
\refmodule{doctest} is serious about requiring exact matches in expected
output. If even a single character doesn't match, the test fails. This
will probably surprise you a few times, as you learn exactly what Python
does and doesn't guarantee about output. For example, when printing a
dict, Python doesn't guarantee that the key-value pairs will be printed
in any particular order, so a test like
% Hey! What happened to Monty Python examples?
% Tim: ask Guido -- it's his example!
\begin{verbatim}
>>> foo()
{"Hermione": "hippogryph", "Harry": "broomstick"}
\end{verbatim}
is vulnerable! One workaround is to do
\begin{verbatim}
>>> foo() == {"Hermione": "hippogryph", "Harry": "broomstick"}
True
\end{verbatim}
instead. Another is to do
\begin{verbatim}
>>> d = foo().items()
>>> d.sort()
>>> d
[('Harry', 'broomstick'), ('Hermione', 'hippogryph')]
\end{verbatim}
There are others, but you get the idea.
Another bad idea is to print things that embed an object address, like
\begin{verbatim}
>>> id(1.0) # certain to fail some of the time
7948648
>>> class C: pass
>>> C() # the default repr() for instances embeds an address
<__main__.C instance at 0x00AC18F0>
\end{verbatim}
The \constant{ELLIPSIS} directive gives a nice approach for the last
example:
\begin{verbatim}
>>> C() #doctest: +ELLIPSIS
<__main__.C instance at 0x...>
\end{verbatim}
Floating-point numbers are also subject to small output variations across
platforms, because Python defers to the platform C library for float
formatting, and C libraries vary widely in quality here.
\begin{verbatim}
>>> 1./7 # risky
0.14285714285714285
>>> print 1./7 # safer
0.142857142857
>>> print round(1./7, 6) # much safer
0.142857
\end{verbatim}
Numbers of the form \code{I/2.**J} are safe across all platforms, and I
often contrive doctest examples to produce numbers of that form:
\begin{verbatim}
>>> 3./4 # utterly safe
0.75
\end{verbatim}
Simple fractions are also easier for people to understand, and that makes
for better documentation.
\subsection{Basic API\label{doctest-basic-api}}
The functions \function{testmod()} and \function{testfile()} provide a
simple interface to doctest that should be sufficient for most basic
uses. For a less formal introduction to these two functions, see
sections \ref{doctest-simple-testmod} and
\ref{doctest-simple-testfile}.
\begin{funcdesc}{testfile}{filename\optional{, module_relative}\optional{,
name}\optional{, package}\optional{,
globs}\optional{, verbose}\optional{,
report}\optional{, optionflags}\optional{,
extraglobs}\optional{, raise_on_error}\optional{,
parser}\optional{, encoding}}
All arguments except \var{filename} are optional, and should be
specified in keyword form.
Test examples in the file named \var{filename}. Return
\samp{(\var{failure_count}, \var{test_count})}.
Optional argument \var{module_relative} specifies how the filename
should be interpreted:
\begin{itemize}
\item If \var{module_relative} is \code{True} (the default), then
\var{filename} specifies an OS-independent module-relative
path. By default, this path is relative to the calling
module's directory; but if the \var{package} argument is
specified, then it is relative to that package. To ensure
OS-independence, \var{filename} should use \code{/} characters
to separate path segments, and may not be an absolute path
(i.e., it may not begin with \code{/}).
\item If \var{module_relative} is \code{False}, then \var{filename}
specifies an OS-specific path. The path may be absolute or
relative; relative paths are resolved with respect to the
current working directory.
\end{itemize}
Optional argument \var{name} gives the name of the test; by default,
or if \code{None}, \code{os.path.basename(\var{filename})} is used.
Optional argument \var{package} is a Python package or the name of a
Python package whose directory should be used as the base directory
for a module-relative filename. If no package is specified, then
the calling module's directory is used as the base directory for
module-relative filenames. It is an error to specify \var{package}
if \var{module_relative} is \code{False}.
Optional argument \var{globs} gives a dict to be used as the globals
when executing examples. A new shallow copy of this dict is
created for the doctest, so its examples start with a clean slate.
By default, or if \code{None}, a new empty dict is used.
Optional argument \var{extraglobs} gives a dict merged into the
globals used to execute examples. This works like
\method{dict.update()}: if \var{globs} and \var{extraglobs} have a
common key, the associated value in \var{extraglobs} appears in the
combined dict. By default, or if \code{None}, no extra globals are
used. This is an advanced feature that allows parameterization of
doctests. For example, a doctest can be written for a base class, using
a generic name for the class, then reused to test any number of
subclasses by passing an \var{extraglobs} dict mapping the generic
name to the subclass to be tested.
Optional argument \var{verbose} prints lots of stuff if true, and prints
only failures if false; by default, or if \code{None}, it's true
if and only if \code{'-v'} is in \code{sys.argv}.
Optional argument \var{report} prints a summary at the end when true,
else prints nothing at the end. In verbose mode, the summary is
detailed, else the summary is very brief (in fact, empty if all tests
passed).
Optional argument \var{optionflags} or's together option flags. See
section~\ref{doctest-options}.
Optional argument \var{raise_on_error} defaults to false. If true,
an exception is raised upon the first failure or unexpected exception
in an example. This allows failures to be post-mortem debugged.
Default behavior is to continue running examples.
Optional argument \var{parser} specifies a \class{DocTestParser} (or
subclass) that should be used to extract tests from the files. It
defaults to a normal parser (i.e., \code{\class{DocTestParser}()}).
Optional argument \var{encoding} specifies an encoding that should
be used to convert the file to unicode.
\versionadded{2.4}
\versionchanged[The parameter \var{encoding} was added]{2.5}
\end{funcdesc}
\begin{funcdesc}{testmod}{\optional{m}\optional{, name}\optional{,
globs}\optional{, verbose}\optional{,
report}\optional{,
optionflags}\optional{, extraglobs}\optional{,
raise_on_error}\optional{, exclude_empty}}
All arguments are optional, and all except for \var{m} should be
specified in keyword form.
Test examples in docstrings in functions and classes reachable
from module \var{m} (or module \module{__main__} if \var{m} is not
supplied or is \code{None}), starting with \code{\var{m}.__doc__}.
Also test examples reachable from dict \code{\var{m}.__test__}, if it
exists and is not \code{None}. \code{\var{m}.__test__} maps
names (strings) to functions, classes and strings; function and class
docstrings are searched for examples; strings are searched directly,
as if they were docstrings.
Only docstrings attached to objects belonging to module \var{m} are
searched.
Return \samp{(\var{failure_count}, \var{test_count})}.
Optional argument \var{name} gives the name of the module; by default,
or if \code{None}, \code{\var{m}.__name__} is used.
Optional argument \var{exclude_empty} defaults to false. If true,
objects for which no doctests are found are excluded from consideration.
The default is a backward compatibility hack, so that code still
using \method{doctest.master.summarize()} in conjunction with
\function{testmod()} continues to get output for objects with no tests.
The \var{exclude_empty} argument to the newer \class{DocTestFinder}
constructor defaults to true.
Optional arguments \var{extraglobs}, \var{verbose}, \var{report},
\var{optionflags}, \var{raise_on_error}, and \var{globs} are the same as
for function \function{testfile()} above, except that \var{globs}
defaults to \code{\var{m}.__dict__}.
\versionchanged[The parameter \var{optionflags} was added]{2.3}
\versionchanged[The parameters \var{extraglobs}, \var{raise_on_error}
and \var{exclude_empty} were added]{2.4}
\versionchanged[The optional argument \var{isprivate}, deprecated
in 2.4, was removed]{2.5}
\end{funcdesc}
There's also a function to run the doctests associated with a single object.
This function is provided for backward compatibility. There are no plans
to deprecate it, but it's rarely useful:
\begin{funcdesc}{run_docstring_examples}{f, globs\optional{,
verbose}\optional{, name}\optional{,
compileflags}\optional{, optionflags}}
Test examples associated with object \var{f}; for example, \var{f} may
be a module, function, or class object.
A shallow copy of dictionary argument \var{globs} is used for the
execution context.
Optional argument \var{name} is used in failure messages, and defaults
to \code{"NoName"}.
If optional argument \var{verbose} is true, output is generated even
if there are no failures. By default, output is generated only in case
of an example failure.
Optional argument \var{compileflags} gives the set of flags that should
be used by the Python compiler when running the examples. By default, or
if \code{None}, flags are deduced corresponding to the set of future
features found in \var{globs}.
Optional argument \var{optionflags} works as for function
\function{testfile()} above.
\end{funcdesc}
\subsection{Unittest API\label{doctest-unittest-api}}
As your collection of doctest'ed modules grows, you'll want a way to run
all their doctests systematically. Prior to Python 2.4, \refmodule{doctest}
had a barely documented \class{Tester} class that supplied a rudimentary
way to combine doctests from multiple modules. \class{Tester} was feeble,
and in practice most serious Python testing frameworks build on the
\refmodule{unittest} module, which supplies many flexible ways to combine
tests from multiple sources. So, in Python 2.4, \refmodule{doctest}'s
\class{Tester} class is deprecated, and \refmodule{doctest} provides two
functions that can be used to create \refmodule{unittest} test suites from
modules and text files containing doctests. These test suites can then be
run using \refmodule{unittest} test runners:
\begin{verbatim}
import unittest
import doctest
import my_module_with_doctests, and_another
suite = unittest.TestSuite()
for mod in my_module_with_doctests, and_another:
suite.addTest(doctest.DocTestSuite(mod))
runner = unittest.TextTestRunner()
runner.run(suite)
\end{verbatim}
There are two main functions for creating \class{\refmodule{unittest}.TestSuite}
instances from text files and modules with doctests:
\begin{funcdesc}{DocFileSuite}{\optional{module_relative}\optional{,
package}\optional{, setUp}\optional{,
tearDown}\optional{, globs}\optional{,
optionflags}\optional{, parser}\optional{,
encoding}}
Convert doctest tests from one or more text files to a
\class{\refmodule{unittest}.TestSuite}.
The returned \class{\refmodule{unittest}.TestSuite} is to be run by the
unittest framework and runs the interactive examples in each file. If an
example in any file fails, then the synthesized unit test fails, and a
\exception{failureException} exception is raised showing the name of the
file containing the test and a (sometimes approximate) line number.
Pass one or more paths (as strings) to text files to be examined.
Options may be provided as keyword arguments:
Optional argument \var{module_relative} specifies how
the filenames in \var{paths} should be interpreted:
\begin{itemize}
\item If \var{module_relative} is \code{True} (the default), then
each filename specifies an OS-independent module-relative
path. By default, this path is relative to the calling
module's directory; but if the \var{package} argument is
specified, then it is relative to that package. To ensure
OS-independence, each filename should use \code{/} characters
to separate path segments, and may not be an absolute path
(i.e., it may not begin with \code{/}).
\item If \var{module_relative} is \code{False}, then each filename
specifies an OS-specific path. The path may be absolute or
relative; relative paths are resolved with respect to the
current working directory.
\end{itemize}
Optional argument \var{package} is a Python package or the name
of a Python package whose directory should be used as the base
directory for module-relative filenames. If no package is
specified, then the calling module's directory is used as the base
directory for module-relative filenames. It is an error to specify
\var{package} if \var{module_relative} is \code{False}.
Optional argument \var{setUp} specifies a set-up function for
the test suite. This is called before running the tests in each
file. The \var{setUp} function will be passed a \class{DocTest}
object. The setUp function can access the test globals as the
\var{globs} attribute of the test passed.
Optional argument \var{tearDown} specifies a tear-down function
for the test suite. This is called after running the tests in each
file. The \var{tearDown} function will be passed a \class{DocTest}
object. The setUp function can access the test globals as the
\var{globs} attribute of the test passed.
Optional argument \var{globs} is a dictionary containing the
initial global variables for the tests. A new copy of this
dictionary is created for each test. By default, \var{globs} is
a new empty dictionary.
Optional argument \var{optionflags} specifies the default
doctest options for the tests, created by or-ing together
individual option flags. See section~\ref{doctest-options}.
See function \function{set_unittest_reportflags()} below for
a better way to set reporting options.
Optional argument \var{parser} specifies a \class{DocTestParser} (or
subclass) that should be used to extract tests from the files. It
defaults to a normal parser (i.e., \code{\class{DocTestParser}()}).
Optional argument \var{encoding} specifies an encoding that should
be used to convert the file to unicode.
\versionadded{2.4}
\versionchanged[The global \code{__file__} was added to the
globals provided to doctests loaded from a text file using
\function{DocFileSuite()}]{2.5}
\versionchanged[The parameter \var{encoding} was added]{2.5}
\end{funcdesc}
\begin{funcdesc}{DocTestSuite}{\optional{module}\optional{,
globs}\optional{, extraglobs}\optional{,
test_finder}\optional{, setUp}\optional{,
tearDown}\optional{, checker}}
Convert doctest tests for a module to a
\class{\refmodule{unittest}.TestSuite}.
The returned \class{\refmodule{unittest}.TestSuite} is to be run by the
unittest framework and runs each doctest in the module. If any of the
doctests fail, then the synthesized unit test fails, and a
\exception{failureException} exception is raised showing the name of the
file containing the test and a (sometimes approximate) line number.
Optional argument \var{module} provides the module to be tested. It
can be a module object or a (possibly dotted) module name. If not
specified, the module calling this function is used.
Optional argument \var{globs} is a dictionary containing the
initial global variables for the tests. A new copy of this
dictionary is created for each test. By default, \var{globs} is
a new empty dictionary.
Optional argument \var{extraglobs} specifies an extra set of
global variables, which is merged into \var{globs}. By default, no
extra globals are used.
Optional argument \var{test_finder} is the \class{DocTestFinder}
object (or a drop-in replacement) that is used to extract doctests
from the module.
Optional arguments \var{setUp}, \var{tearDown}, and \var{optionflags}
are the same as for function \function{DocFileSuite()} above.
\versionadded{2.3}
\versionchanged[The parameters \var{globs}, \var{extraglobs},
\var{test_finder}, \var{setUp}, \var{tearDown}, and
\var{optionflags} were added; this function now uses the same search
technique as \function{testmod()}]{2.4}
\end{funcdesc}
Under the covers, \function{DocTestSuite()} creates a
\class{\refmodule{unittest}.TestSuite} out of \class{doctest.DocTestCase}
instances, and \class{DocTestCase} is a subclass of
\class{\refmodule{unittest}.TestCase}. \class{DocTestCase} isn't documented
here (it's an internal detail), but studying its code can answer questions
about the exact details of \refmodule{unittest} integration.
Similarly, \function{DocFileSuite()} creates a
\class{\refmodule{unittest}.TestSuite} out of \class{doctest.DocFileCase}
instances, and \class{DocFileCase} is a subclass of \class{DocTestCase}.
So both ways of creating a \class{\refmodule{unittest}.TestSuite} run
instances of \class{DocTestCase}. This is important for a subtle reason:
when you run \refmodule{doctest} functions yourself, you can control the
\refmodule{doctest} options in use directly, by passing option flags to
\refmodule{doctest} functions. However, if you're writing a
\refmodule{unittest} framework, \refmodule{unittest} ultimately controls
when and how tests get run. The framework author typically wants to
control \refmodule{doctest} reporting options (perhaps, e.g., specified by
command line options), but there's no way to pass options through
\refmodule{unittest} to \refmodule{doctest} test runners.
For this reason, \refmodule{doctest} also supports a notion of
\refmodule{doctest} reporting flags specific to \refmodule{unittest}
support, via this function:
\begin{funcdesc}{set_unittest_reportflags}{flags}
Set the \refmodule{doctest} reporting flags to use.
Argument \var{flags} or's together option flags. See
section~\ref{doctest-options}. Only "reporting flags" can be used.
This is a module-global setting, and affects all future doctests run by
module \refmodule{unittest}: the \method{runTest()} method of
\class{DocTestCase} looks at the option flags specified for the test case
when the \class{DocTestCase} instance was constructed. If no reporting
flags were specified (which is the typical and expected case),
\refmodule{doctest}'s \refmodule{unittest} reporting flags are or'ed into
the option flags, and the option flags so augmented are passed to the
\class{DocTestRunner} instance created to run the doctest. If any
reporting flags were specified when the \class{DocTestCase} instance was
constructed, \refmodule{doctest}'s \refmodule{unittest} reporting flags
are ignored.
The value of the \refmodule{unittest} reporting flags in effect before the
function was called is returned by the function.
\versionadded{2.4}
\end{funcdesc}
\subsection{Advanced API\label{doctest-advanced-api}}
The basic API is a simple wrapper that's intended to make doctest easy
to use. It is fairly flexible, and should meet most users' needs;
however, if you require more fine-grained control over testing, or
wish to extend doctest's capabilities, then you should use the
advanced API.
The advanced API revolves around two container classes, which are used
to store the interactive examples extracted from doctest cases:
\begin{itemize}
\item \class{Example}: A single python statement, paired with its
expected output.
\item \class{DocTest}: A collection of \class{Example}s, typically
extracted from a single docstring or text file.
\end{itemize}
Additional processing classes are defined to find, parse, and run, and
check doctest examples:
\begin{itemize}
\item \class{DocTestFinder}: Finds all docstrings in a given module,
and uses a \class{DocTestParser} to create a \class{DocTest}
from every docstring that contains interactive examples.
\item \class{DocTestParser}: Creates a \class{DocTest} object from
a string (such as an object's docstring).
\item \class{DocTestRunner}: Executes the examples in a
\class{DocTest}, and uses an \class{OutputChecker} to verify
their output.
\item \class{OutputChecker}: Compares the actual output from a
doctest example with the expected output, and decides whether
they match.
\end{itemize}
The relationships among these processing classes are summarized in the
following diagram:
\begin{verbatim}
list of:
+------+ +---------+
|module| --DocTestFinder-> | DocTest | --DocTestRunner-> results
+------+ | ^ +---------+ | ^ (printed)
| | | Example | | |
v | | ... | v |
DocTestParser | Example | OutputChecker
+---------+
\end{verbatim}
\subsubsection{DocTest Objects\label{doctest-DocTest}}
\begin{classdesc}{DocTest}{examples, globs, name, filename, lineno,
docstring}
A collection of doctest examples that should be run in a single
namespace. The constructor arguments are used to initialize the
member variables of the same names.
\versionadded{2.4}
\end{classdesc}
\class{DocTest} defines the following member variables. They are
initialized by the constructor, and should not be modified directly.
\begin{memberdesc}{examples}
A list of \class{Example} objects encoding the individual
interactive Python examples that should be run by this test.
\end{memberdesc}
\begin{memberdesc}{globs}
The namespace (aka globals) that the examples should be run in.
This is a dictionary mapping names to values. Any changes to the
namespace made by the examples (such as binding new variables)
will be reflected in \member{globs} after the test is run.
\end{memberdesc}
\begin{memberdesc}{name}
A string name identifying the \class{DocTest}. Typically, this is
the name of the object or file that the test was extracted from.
\end{memberdesc}
\begin{memberdesc}{filename}
The name of the file that this \class{DocTest} was extracted from;
or \code{None} if the filename is unknown, or if the
\class{DocTest} was not extracted from a file.
\end{memberdesc}
\begin{memberdesc}{lineno}
The line number within \member{filename} where this
\class{DocTest} begins, or \code{None} if the line number is
unavailable. This line number is zero-based with respect to the
beginning of the file.
\end{memberdesc}
\begin{memberdesc}{docstring}
The string that the test was extracted from, or `None` if the
string is unavailable, or if the test was not extracted from a
string.
\end{memberdesc}
\subsubsection{Example Objects\label{doctest-Example}}
\begin{classdesc}{Example}{source, want\optional{,
exc_msg}\optional{, lineno}\optional{,
indent}\optional{, options}}
A single interactive example, consisting of a Python statement and
its expected output. The constructor arguments are used to
initialize the member variables of the same names.
\versionadded{2.4}
\end{classdesc}
\class{Example} defines the following member variables. They are
initialized by the constructor, and should not be modified directly.
\begin{memberdesc}{source}
A string containing the example's source code. This source code
consists of a single Python statement, and always ends with a
newline; the constructor adds a newline when necessary.
\end{memberdesc}
\begin{memberdesc}{want}
The expected output from running the example's source code (either
from stdout, or a traceback in case of exception). \member{want}
ends with a newline unless no output is expected, in which case
it's an empty string. The constructor adds a newline when
necessary.
\end{memberdesc}
\begin{memberdesc}{exc_msg}
The exception message generated by the example, if the example is
expected to generate an exception; or \code{None} if it is not
expected to generate an exception. This exception message is
compared against the return value of
\function{traceback.format_exception_only()}. \member{exc_msg}
ends with a newline unless it's \code{None}. The constructor adds
a newline if needed.
\end{memberdesc}
\begin{memberdesc}{lineno}
The line number within the string containing this example where
the example begins. This line number is zero-based with respect
to the beginning of the containing string.
\end{memberdesc}
\begin{memberdesc}{indent}
The example's indentation in the containing string, i.e., the
number of space characters that precede the example's first
prompt.
\end{memberdesc}
\begin{memberdesc}{options}
A dictionary mapping from option flags to \code{True} or
\code{False}, which is used to override default options for this
example. Any option flags not contained in this dictionary are
left at their default value (as specified by the
\class{DocTestRunner}'s \member{optionflags}).
By default, no options are set.
\end{memberdesc}
\subsubsection{DocTestFinder objects\label{doctest-DocTestFinder}}
\begin{classdesc}{DocTestFinder}{\optional{verbose}\optional{,
parser}\optional{, recurse}\optional{,
exclude_empty}}
A processing class used to extract the \class{DocTest}s that are
relevant to a given object, from its docstring and the docstrings
of its contained objects. \class{DocTest}s can currently be
extracted from the following object types: modules, functions,
classes, methods, staticmethods, classmethods, and properties.
The optional argument \var{verbose} can be used to display the
objects searched by the finder. It defaults to \code{False} (no
output).
The optional argument \var{parser} specifies the
\class{DocTestParser} object (or a drop-in replacement) that is
used to extract doctests from docstrings.
If the optional argument \var{recurse} is false, then
\method{DocTestFinder.find()} will only examine the given object,
and not any contained objects.
If the optional argument \var{exclude_empty} is false, then
\method{DocTestFinder.find()} will include tests for objects with
empty docstrings.
\versionadded{2.4}
\end{classdesc}
\class{DocTestFinder} defines the following method:
\begin{methoddesc}{find}{obj\optional{, name}\optional{,
module}\optional{, globs}\optional{, extraglobs}}
Return a list of the \class{DocTest}s that are defined by
\var{obj}'s docstring, or by any of its contained objects'
docstrings.
The optional argument \var{name} specifies the object's name; this
name will be used to construct names for the returned
\class{DocTest}s. If \var{name} is not specified, then
\code{\var{obj}.__name__} is used.
The optional parameter \var{module} is the module that contains
the given object. If the module is not specified or is None, then
the test finder will attempt to automatically determine the
correct module. The object's module is used:
\begin{itemize}
\item As a default namespace, if \var{globs} is not specified.
\item To prevent the DocTestFinder from extracting DocTests
from objects that are imported from other modules. (Contained
objects with modules other than \var{module} are ignored.)
\item To find the name of the file containing the object.
\item To help find the line number of the object within its file.
\end{itemize}
If \var{module} is \code{False}, no attempt to find the module
will be made. This is obscure, of use mostly in testing doctest
itself: if \var{module} is \code{False}, or is \code{None} but
cannot be found automatically, then all objects are considered to
belong to the (non-existent) module, so all contained objects will
(recursively) be searched for doctests.
The globals for each \class{DocTest} is formed by combining
\var{globs} and \var{extraglobs} (bindings in \var{extraglobs}
override bindings in \var{globs}). A new shallow copy of the globals
dictionary is created for each \class{DocTest}. If \var{globs} is
not specified, then it defaults to the module's \var{__dict__}, if
specified, or \code{\{\}} otherwise. If \var{extraglobs} is not
specified, then it defaults to \code{\{\}}.
\end{methoddesc}
\subsubsection{DocTestParser objects\label{doctest-DocTestParser}}
\begin{classdesc}{DocTestParser}{}
A processing class used to extract interactive examples from a
string, and use them to create a \class{DocTest} object.
\versionadded{2.4}
\end{classdesc}
\class{DocTestParser} defines the following methods:
\begin{methoddesc}{get_doctest}{string, globs, name, filename, lineno}
Extract all doctest examples from the given string, and collect
them into a \class{DocTest} object.
\var{globs}, \var{name}, \var{filename}, and \var{lineno} are
attributes for the new \class{DocTest} object. See the
documentation for \class{DocTest} for more information.
\end{methoddesc}
\begin{methoddesc}{get_examples}{string\optional{, name}}
Extract all doctest examples from the given string, and return
them as a list of \class{Example} objects. Line numbers are
0-based. The optional argument \var{name} is a name identifying
this string, and is only used for error messages.
\end{methoddesc}
\begin{methoddesc}{parse}{string\optional{, name}}
Divide the given string into examples and intervening text, and
return them as a list of alternating \class{Example}s and strings.
Line numbers for the \class{Example}s are 0-based. The optional
argument \var{name} is a name identifying this string, and is only
used for error messages.
\end{methoddesc}
\subsubsection{DocTestRunner objects\label{doctest-DocTestRunner}}
\begin{classdesc}{DocTestRunner}{\optional{checker}\optional{,
verbose}\optional{, optionflags}}
A processing class used to execute and verify the interactive
examples in a \class{DocTest}.
The comparison between expected outputs and actual outputs is done
by an \class{OutputChecker}. This comparison may be customized
with a number of option flags; see section~\ref{doctest-options}
for more information. If the option flags are insufficient, then
the comparison may also be customized by passing a subclass of
\class{OutputChecker} to the constructor.
The test runner's display output can be controlled in two ways.
First, an output function can be passed to
\method{TestRunner.run()}; this function will be called with
strings that should be displayed. It defaults to
\code{sys.stdout.write}. If capturing the output is not
sufficient, then the display output can be also customized by
subclassing DocTestRunner, and overriding the methods
\method{report_start}, \method{report_success},
\method{report_unexpected_exception}, and \method{report_failure}.
The optional keyword argument \var{checker} specifies the
\class{OutputChecker} object (or drop-in replacement) that should
be used to compare the expected outputs to the actual outputs of
doctest examples.
The optional keyword argument \var{verbose} controls the
\class{DocTestRunner}'s verbosity. If \var{verbose} is
\code{True}, then information is printed about each example, as it
is run. If \var{verbose} is \code{False}, then only failures are
printed. If \var{verbose} is unspecified, or \code{None}, then
verbose output is used iff the command-line switch \programopt{-v}
is used.
The optional keyword argument \var{optionflags} can be used to
control how the test runner compares expected output to actual
output, and how it displays failures. For more information, see
section~\ref{doctest-options}.
\versionadded{2.4}
\end{classdesc}
\class{DocTestParser} defines the following methods:
\begin{methoddesc}{report_start}{out, test, example}
Report that the test runner is about to process the given example.
This method is provided to allow subclasses of
\class{DocTestRunner} to customize their output; it should not be
called directly.
\var{example} is the example about to be processed. \var{test} is
the test containing \var{example}. \var{out} is the output
function that was passed to \method{DocTestRunner.run()}.
\end{methoddesc}
\begin{methoddesc}{report_success}{out, test, example, got}
Report that the given example ran successfully. This method is
provided to allow subclasses of \class{DocTestRunner} to customize
their output; it should not be called directly.
\var{example} is the example about to be processed. \var{got} is
the actual output from the example. \var{test} is the test
containing \var{example}. \var{out} is the output function that
was passed to \method{DocTestRunner.run()}.
\end{methoddesc}
\begin{methoddesc}{report_failure}{out, test, example, got}
Report that the given example failed. This method is provided to
allow subclasses of \class{DocTestRunner} to customize their
output; it should not be called directly.
\var{example} is the example about to be processed. \var{got} is
the actual output from the example. \var{test} is the test
containing \var{example}. \var{out} is the output function that
was passed to \method{DocTestRunner.run()}.
\end{methoddesc}
\begin{methoddesc}{report_unexpected_exception}{out, test, example, exc_info}
Report that the given example raised an unexpected exception.
This method is provided to allow subclasses of
\class{DocTestRunner} to customize their output; it should not be
called directly.
\var{example} is the example about to be processed.
\var{exc_info} is a tuple containing information about the
unexpected exception (as returned by \function{sys.exc_info()}).
\var{test} is the test containing \var{example}. \var{out} is the
output function that was passed to \method{DocTestRunner.run()}.
\end{methoddesc}
\begin{methoddesc}{run}{test\optional{, compileflags}\optional{,
out}\optional{, clear_globs}}
Run the examples in \var{test} (a \class{DocTest} object), and
display the results using the writer function \var{out}.
The examples are run in the namespace \code{test.globs}. If
\var{clear_globs} is true (the default), then this namespace will
be cleared after the test runs, to help with garbage collection.
If you would like to examine the namespace after the test
completes, then use \var{clear_globs=False}.
\var{compileflags} gives the set of flags that should be used by
the Python compiler when running the examples. If not specified,
then it will default to the set of future-import flags that apply
to \var{globs}.
The output of each example is checked using the
\class{DocTestRunner}'s output checker, and the results are
formatted by the \method{DocTestRunner.report_*} methods.
\end{methoddesc}
\begin{methoddesc}{summarize}{\optional{verbose}}
Print a summary of all the test cases that have been run by this
DocTestRunner, and return a tuple \samp{(\var{failure_count},
\var{test_count})}.
The optional \var{verbose} argument controls how detailed the
summary is. If the verbosity is not specified, then the
\class{DocTestRunner}'s verbosity is used.
\end{methoddesc}
\subsubsection{OutputChecker objects\label{doctest-OutputChecker}}
\begin{classdesc}{OutputChecker}{}
A class used to check the whether the actual output from a doctest
example matches the expected output. \class{OutputChecker}
defines two methods: \method{check_output}, which compares a given
pair of outputs, and returns true if they match; and
\method{output_difference}, which returns a string describing the
differences between two outputs.
\versionadded{2.4}
\end{classdesc}
\class{OutputChecker} defines the following methods:
\begin{methoddesc}{check_output}{want, got, optionflags}
Return \code{True} iff the actual output from an example
(\var{got}) matches the expected output (\var{want}). These
strings are always considered to match if they are identical; but
depending on what option flags the test runner is using, several
non-exact match types are also possible. See
section~\ref{doctest-options} for more information about option
flags.
\end{methoddesc}
\begin{methoddesc}{output_difference}{example, got, optionflags}
Return a string describing the differences between the expected
output for a given example (\var{example}) and the actual output
(\var{got}). \var{optionflags} is the set of option flags used to
compare \var{want} and \var{got}.
\end{methoddesc}
\subsection{Debugging\label{doctest-debugging}}
Doctest provides several mechanisms for debugging doctest examples:
\begin{itemize}
\item Several functions convert doctests to executable Python
programs, which can be run under the Python debugger, \refmodule{pdb}.
\item The \class{DebugRunner} class is a subclass of
\class{DocTestRunner} that raises an exception for the first
failing example, containing information about that example.
This information can be used to perform post-mortem debugging on
the example.
\item The \refmodule{unittest} cases generated by \function{DocTestSuite()}
support the \method{debug()} method defined by
\class{\refmodule{unittest}.TestCase}.
\item You can add a call to \function{\refmodule{pdb}.set_trace()} in a
doctest example, and you'll drop into the Python debugger when that
line is executed. Then you can inspect current values of variables,
and so on. For example, suppose \file{a.py} contains just this
module docstring:
\begin{verbatim}
"""
>>> def f(x):
... g(x*2)
>>> def g(x):
... print x+3
... import pdb; pdb.set_trace()
>>> f(3)
9
"""
\end{verbatim}
Then an interactive Python session may look like this:
\begin{verbatim}
>>> import a, doctest
>>> doctest.testmod(a)
--Return--
> <doctest a[1]>(3)g()->None
-> import pdb; pdb.set_trace()
(Pdb) list
1 def g(x):
2 print x+3
3 -> import pdb; pdb.set_trace()
[EOF]
(Pdb) print x
6
(Pdb) step
--Return--
> <doctest a[0]>(2)f()->None
-> g(x*2)
(Pdb) list
1 def f(x):
2 -> g(x*2)
[EOF]
(Pdb) print x
3
(Pdb) step
--Return--
> <doctest a[2]>(1)?()->None
-> f(3)
(Pdb) cont
(0, 3)
>>>
\end{verbatim}
\versionchanged[The ability to use \code{\refmodule{pdb}.set_trace()}
usefully inside doctests was added]{2.4}
\end{itemize}
Functions that convert doctests to Python code, and possibly run
the synthesized code under the debugger:
\begin{funcdesc}{script_from_examples}{s}
Convert text with examples to a script.
Argument \var{s} is a string containing doctest examples. The string
is converted to a Python script, where doctest examples in \var{s}
are converted to regular code, and everything else is converted to
Python comments. The generated script is returned as a string.
For example,
\begin{verbatim}
import doctest
print doctest.script_from_examples(r"""
Set x and y to 1 and 2.
>>> x, y = 1, 2
Print their sum:
>>> print x+y
3
""")
\end{verbatim}
displays:
\begin{verbatim}
# Set x and y to 1 and 2.
x, y = 1, 2
#
# Print their sum:
print x+y
# Expected:
## 3
\end{verbatim}
This function is used internally by other functions (see below), but
can also be useful when you want to transform an interactive Python
session into a Python script.
\versionadded{2.4}
\end{funcdesc}
\begin{funcdesc}{testsource}{module, name}
Convert the doctest for an object to a script.
Argument \var{module} is a module object, or dotted name of a module,
containing the object whose doctests are of interest. Argument
\var{name} is the name (within the module) of the object with the
doctests of interest. The result is a string, containing the
object's docstring converted to a Python script, as described for
\function{script_from_examples()} above. For example, if module
\file{a.py} contains a top-level function \function{f()}, then
\begin{verbatim}
import a, doctest
print doctest.testsource(a, "a.f")
\end{verbatim}
prints a script version of function \function{f()}'s docstring,
with doctests converted to code, and the rest placed in comments.
\versionadded{2.3}
\end{funcdesc}
\begin{funcdesc}{debug}{module, name\optional{, pm}}
Debug the doctests for an object.
The \var{module} and \var{name} arguments are the same as for function
\function{testsource()} above. The synthesized Python script for the
named object's docstring is written to a temporary file, and then that
file is run under the control of the Python debugger, \refmodule{pdb}.
A shallow copy of \code{\var{module}.__dict__} is used for both local
and global execution context.
Optional argument \var{pm} controls whether post-mortem debugging is
used. If \var{pm} has a true value, the script file is run directly, and
the debugger gets involved only if the script terminates via raising an
unhandled exception. If it does, then post-mortem debugging is invoked,
via \code{\refmodule{pdb}.post_mortem()}, passing the traceback object
from the unhandled exception. If \var{pm} is not specified, or is false,
the script is run under the debugger from the start, via passing an
appropriate \function{execfile()} call to \code{\refmodule{pdb}.run()}.
\versionadded{2.3}
\versionchanged[The \var{pm} argument was added]{2.4}
\end{funcdesc}
\begin{funcdesc}{debug_src}{src\optional{, pm}\optional{, globs}}
Debug the doctests in a string.
This is like function \function{debug()} above, except that
a string containing doctest examples is specified directly, via
the \var{src} argument.
Optional argument \var{pm} has the same meaning as in function
\function{debug()} above.
Optional argument \var{globs} gives a dictionary to use as both
local and global execution context. If not specified, or \code{None},
an empty dictionary is used. If specified, a shallow copy of the
dictionary is used.
\versionadded{2.4}
\end{funcdesc}
The \class{DebugRunner} class, and the special exceptions it may raise,
are of most interest to testing framework authors, and will only be
sketched here. See the source code, and especially \class{DebugRunner}'s
docstring (which is a doctest!) for more details:
\begin{classdesc}{DebugRunner}{\optional{checker}\optional{,
verbose}\optional{, optionflags}}
A subclass of \class{DocTestRunner} that raises an exception as
soon as a failure is encountered. If an unexpected exception
occurs, an \exception{UnexpectedException} exception is raised,
containing the test, the example, and the original exception. If
the output doesn't match, then a \exception{DocTestFailure}
exception is raised, containing the test, the example, and the
actual output.
For information about the constructor parameters and methods, see
the documentation for \class{DocTestRunner} in
section~\ref{doctest-advanced-api}.
\end{classdesc}
There are two exceptions that may be raised by \class{DebugRunner}
instances:
\begin{excclassdesc}{DocTestFailure}{test, example, got}
An exception thrown by \class{DocTestRunner} to signal that a
doctest example's actual output did not match its expected output.
The constructor arguments are used to initialize the member
variables of the same names.
\end{excclassdesc}
\exception{DocTestFailure} defines the following member variables:
\begin{memberdesc}{test}
The \class{DocTest} object that was being run when the example failed.
\end{memberdesc}
\begin{memberdesc}{example}
The \class{Example} that failed.
\end{memberdesc}
\begin{memberdesc}{got}
The example's actual output.
\end{memberdesc}
\begin{excclassdesc}{UnexpectedException}{test, example, exc_info}
An exception thrown by \class{DocTestRunner} to signal that a
doctest example raised an unexpected exception. The constructor
arguments are used to initialize the member variables of the same
names.
\end{excclassdesc}
\exception{UnexpectedException} defines the following member variables:
\begin{memberdesc}{test}
The \class{DocTest} object that was being run when the example failed.
\end{memberdesc}
\begin{memberdesc}{example}
The \class{Example} that failed.
\end{memberdesc}
\begin{memberdesc}{exc_info}
A tuple containing information about the unexpected exception, as
returned by \function{sys.exc_info()}.
\end{memberdesc}
\subsection{Soapbox\label{doctest-soapbox}}
As mentioned in the introduction, \refmodule{doctest} has grown to have
three primary uses:
\begin{enumerate}
\item Checking examples in docstrings.
\item Regression testing.
\item Executable documentation / literate testing.
\end{enumerate}
These uses have different requirements, and it is important to
distinguish them. In particular, filling your docstrings with obscure
test cases makes for bad documentation.
When writing a docstring, choose docstring examples with care.
There's an art to this that needs to be learned---it may not be
natural at first. Examples should add genuine value to the
documentation. A good example can often be worth many words.
If done with care, the examples will be invaluable for your users, and
will pay back the time it takes to collect them many times over as the
years go by and things change. I'm still amazed at how often one of
my \refmodule{doctest} examples stops working after a "harmless"
change.
Doctest also makes an excellent tool for regression testing, especially if
you don't skimp on explanatory text. By interleaving prose and examples,
it becomes much easier to keep track of what's actually being tested, and
why. When a test fails, good prose can make it much easier to figure out
what the problem is, and how it should be fixed. It's true that you could
write extensive comments in code-based testing, but few programmers do.
Many have found that using doctest approaches instead leads to much clearer
tests. Perhaps this is simply because doctest makes writing prose a little
easier than writing code, while writing comments in code is a little
harder. I think it goes deeper than just that: the natural attitude
when writing a doctest-based test is that you want to explain the fine
points of your software, and illustrate them with examples. This in
turn naturally leads to test files that start with the simplest features,
and logically progress to complications and edge cases. A coherent
narrative is the result, instead of a collection of isolated functions
that test isolated bits of functionality seemingly at random. It's
a different attitude, and produces different results, blurring the
distinction between testing and explaining.
Regression testing is best confined to dedicated objects or files. There
are several options for organizing tests:
\begin{itemize}
\item Write text files containing test cases as interactive examples,
and test the files using \function{testfile()} or
\function{DocFileSuite()}. This is recommended, although is
easiest to do for new projects, designed from the start to use
doctest.
\item Define functions named \code{_regrtest_\textit{topic}} that
consist of single docstrings, containing test cases for the
named topics. These functions can be included in the same file
as the module, or separated out into a separate test file.
\item Define a \code{__test__} dictionary mapping from regression test
topics to docstrings containing test cases.
\end{itemize}