ref: 7be7d0681f567e97fd37f937c2e5e486d6d74eab
dir: /sys/src/ape/lib/openssl/crypto/idea/idea_lcl.h/
/* crypto/idea/idea_lcl.h */
/* Copyright (C) 1995-1998 Eric Young ([email protected])
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young ([email protected]).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson ([email protected]).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young ([email protected])"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson ([email protected])"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* The new form of this macro (check if the a*b == 0) was suggested by
* Colin Plumb <[email protected]> */
/* Removal of the inner if from from Wei Dai 24/4/96 */
#define idea_mul(r,a,b,ul) \
ul=(unsigned long)a*b; \
if (ul != 0) \
{ \
r=(ul&0xffff)-(ul>>16); \
r-=((r)>>16); \
} \
else \
r=(-(int)a-b+1); /* assuming a or b is 0 and in range */
#ifdef undef
#define idea_mul(r,a,b,ul,sl) \
if (a == 0) r=(0x10001-b)&0xffff; \
else if (b == 0) r=(0x10001-a)&0xffff; \
else { \
ul=(unsigned long)a*b; \
sl=(ul&0xffff)-(ul>>16); \
if (sl <= 0) sl+=0x10001; \
r=sl; \
}
#endif
/* 7/12/95 - Many thanks to Rhys Weatherley <[email protected]>
* for pointing out that I was assuming little endian
* byte order for all quantities what idea
* actually used bigendian. No where in the spec does it mention
* this, it is all in terms of 16 bit numbers and even the example
* does not use byte streams for the input example :-(.
* If you byte swap each pair of input, keys and iv, the functions
* would produce the output as the old version :-(.
*/
/* NOTE - c is not incremented as per n2l */
#define n2ln(c,l1,l2,n) { \
c+=n; \
l1=l2=0; \
switch (n) { \
case 8: l2 =((unsigned long)(*(--(c)))) ; \
case 7: l2|=((unsigned long)(*(--(c))))<< 8; \
case 6: l2|=((unsigned long)(*(--(c))))<<16; \
case 5: l2|=((unsigned long)(*(--(c))))<<24; \
case 4: l1 =((unsigned long)(*(--(c)))) ; \
case 3: l1|=((unsigned long)(*(--(c))))<< 8; \
case 2: l1|=((unsigned long)(*(--(c))))<<16; \
case 1: l1|=((unsigned long)(*(--(c))))<<24; \
} \
}
/* NOTE - c is not incremented as per l2n */
#define l2nn(l1,l2,c,n) { \
c+=n; \
switch (n) { \
case 8: *(--(c))=(unsigned char)(((l2) )&0xff); \
case 7: *(--(c))=(unsigned char)(((l2)>> 8)&0xff); \
case 6: *(--(c))=(unsigned char)(((l2)>>16)&0xff); \
case 5: *(--(c))=(unsigned char)(((l2)>>24)&0xff); \
case 4: *(--(c))=(unsigned char)(((l1) )&0xff); \
case 3: *(--(c))=(unsigned char)(((l1)>> 8)&0xff); \
case 2: *(--(c))=(unsigned char)(((l1)>>16)&0xff); \
case 1: *(--(c))=(unsigned char)(((l1)>>24)&0xff); \
} \
}
#undef n2l
#define n2l(c,l) (l =((unsigned long)(*((c)++)))<<24L, \
l|=((unsigned long)(*((c)++)))<<16L, \
l|=((unsigned long)(*((c)++)))<< 8L, \
l|=((unsigned long)(*((c)++))))
#undef l2n
#define l2n(l,c) (*((c)++)=(unsigned char)(((l)>>24L)&0xff), \
*((c)++)=(unsigned char)(((l)>>16L)&0xff), \
*((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
*((c)++)=(unsigned char)(((l) )&0xff))
#undef s2n
#define s2n(l,c) (*((c)++)=(unsigned char)(((l) )&0xff), \
*((c)++)=(unsigned char)(((l)>> 8L)&0xff))
#undef n2s
#define n2s(c,l) (l =((IDEA_INT)(*((c)++)))<< 8L, \
l|=((IDEA_INT)(*((c)++))) )
#ifdef undef
/* NOTE - c is not incremented as per c2l */
#define c2ln(c,l1,l2,n) { \
c+=n; \
l1=l2=0; \
switch (n) { \
case 8: l2 =((unsigned long)(*(--(c))))<<24; \
case 7: l2|=((unsigned long)(*(--(c))))<<16; \
case 6: l2|=((unsigned long)(*(--(c))))<< 8; \
case 5: l2|=((unsigned long)(*(--(c)))); \
case 4: l1 =((unsigned long)(*(--(c))))<<24; \
case 3: l1|=((unsigned long)(*(--(c))))<<16; \
case 2: l1|=((unsigned long)(*(--(c))))<< 8; \
case 1: l1|=((unsigned long)(*(--(c)))); \
} \
}
/* NOTE - c is not incremented as per l2c */
#define l2cn(l1,l2,c,n) { \
c+=n; \
switch (n) { \
case 8: *(--(c))=(unsigned char)(((l2)>>24)&0xff); \
case 7: *(--(c))=(unsigned char)(((l2)>>16)&0xff); \
case 6: *(--(c))=(unsigned char)(((l2)>> 8)&0xff); \
case 5: *(--(c))=(unsigned char)(((l2) )&0xff); \
case 4: *(--(c))=(unsigned char)(((l1)>>24)&0xff); \
case 3: *(--(c))=(unsigned char)(((l1)>>16)&0xff); \
case 2: *(--(c))=(unsigned char)(((l1)>> 8)&0xff); \
case 1: *(--(c))=(unsigned char)(((l1) )&0xff); \
} \
}
#undef c2s
#define c2s(c,l) (l =((unsigned long)(*((c)++))) , \
l|=((unsigned long)(*((c)++)))<< 8L)
#undef s2c
#define s2c(l,c) (*((c)++)=(unsigned char)(((l) )&0xff), \
*((c)++)=(unsigned char)(((l)>> 8L)&0xff))
#undef c2l
#define c2l(c,l) (l =((unsigned long)(*((c)++))) , \
l|=((unsigned long)(*((c)++)))<< 8L, \
l|=((unsigned long)(*((c)++)))<<16L, \
l|=((unsigned long)(*((c)++)))<<24L)
#undef l2c
#define l2c(l,c) (*((c)++)=(unsigned char)(((l) )&0xff), \
*((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
*((c)++)=(unsigned char)(((l)>>16L)&0xff), \
*((c)++)=(unsigned char)(((l)>>24L)&0xff))
#endif
#define E_IDEA(num) \
x1&=0xffff; \
idea_mul(x1,x1,*p,ul); p++; \
x2+= *(p++); \
x3+= *(p++); \
x4&=0xffff; \
idea_mul(x4,x4,*p,ul); p++; \
t0=(x1^x3)&0xffff; \
idea_mul(t0,t0,*p,ul); p++; \
t1=(t0+(x2^x4))&0xffff; \
idea_mul(t1,t1,*p,ul); p++; \
t0+=t1; \
x1^=t1; \
x4^=t0; \
ul=x2^t0; /* do the swap to x3 */ \
x2=x3^t1; \
x3=ul;