ref: 94916808dd9a53ac297ab537851791894b919828
dir: /sys/src/cmd/python/Tools/unicode/gencodec.py/
""" Unicode Mapping Parser and Codec Generator.
This script parses Unicode mapping files as available from the Unicode
site (ftp://ftp.unicode.org/Public/MAPPINGS/) and creates Python codec
modules from them. The codecs use the standard character mapping codec
to actually apply the mapping.
Synopsis: gencodec.py dir codec_prefix
All files in dir are scanned and those producing non-empty mappings
will be written to <codec_prefix><mapname>.py with <mapname> being the
first part of the map's filename ('a' in a.b.c.txt) converted to
lowercase with hyphens replaced by underscores.
The tool also writes marshalled versions of the mapping tables to the
same location (with .mapping extension).
Written by Marc-Andre Lemburg ([email protected]).
(c) Copyright CNRI, All Rights Reserved. NO WARRANTY.
(c) Copyright Guido van Rossum, 2000.
Table generation:
(c) Copyright Marc-Andre Lemburg, 2005.
Licensed to PSF under a Contributor Agreement.
"""#"
import re, os, time, marshal, codecs
# Maximum allowed size of charmap tables
MAX_TABLE_SIZE = 8192
# Standard undefined Unicode code point
UNI_UNDEFINED = unichr(0xFFFE)
mapRE = re.compile('((?:0x[0-9a-fA-F]+\+?)+)'
'\s+'
'((?:(?:0x[0-9a-fA-Z]+|<[A-Za-z]+>)\+?)*)'
'\s*'
'(#.+)?')
def parsecodes(codes,
len=len, filter=filter,range=range):
""" Converts code combinations to either a single code integer
or a tuple of integers.
meta-codes (in angular brackets, e.g. <LR> and <RL>) are
ignored.
Empty codes or illegal ones are returned as None.
"""
if not codes:
return None
l = codes.split('+')
if len(l) == 1:
return int(l[0],16)
for i in range(len(l)):
try:
l[i] = int(l[i],16)
except ValueError:
l[i] = None
l = filter(lambda x: x is not None, l)
if len(l) == 1:
return l[0]
else:
return tuple(l)
def readmap(filename):
f = open(filename,'r')
lines = f.readlines()
f.close()
enc2uni = {}
identity = []
unmapped = range(256)
# UTC mapping tables per convention don't include the identity
# mappings for code points 0x00 - 0x1F and 0x7F, unless these are
# explicitly mapped to different characters or undefined
for i in range(32) + [127]:
identity.append(i)
unmapped.remove(i)
enc2uni[i] = (i, 'CONTROL CHARACTER')
for line in lines:
line = line.strip()
if not line or line[0] == '#':
continue
m = mapRE.match(line)
if not m:
#print '* not matched: %s' % repr(line)
continue
enc,uni,comment = m.groups()
enc = parsecodes(enc)
uni = parsecodes(uni)
if comment is None:
comment = ''
else:
comment = comment[1:].strip()
if enc < 256:
if enc in unmapped:
unmapped.remove(enc)
if enc == uni:
identity.append(enc)
enc2uni[enc] = (uni,comment)
else:
enc2uni[enc] = (uni,comment)
# If there are more identity-mapped entries than unmapped entries,
# it pays to generate an identity dictionary first, and add explicit
# mappings to None for the rest
if len(identity) >= len(unmapped):
for enc in unmapped:
enc2uni[enc] = (None, "")
enc2uni['IDENTITY'] = 256
return enc2uni
def hexrepr(t, precision=4):
if t is None:
return 'None'
try:
len(t)
except:
return '0x%0*X' % (precision, t)
try:
return '(' + ', '.join(['0x%0*X' % (precision, item)
for item in t]) + ')'
except TypeError, why:
print '* failed to convert %r: %s' % (t, why)
raise
def python_mapdef_code(varname, map, comments=1, precisions=(2, 4)):
l = []
append = l.append
if map.has_key("IDENTITY"):
append("%s = codecs.make_identity_dict(range(%d))" %
(varname, map["IDENTITY"]))
append("%s.update({" % varname)
splits = 1
del map["IDENTITY"]
identity = 1
else:
append("%s = {" % varname)
splits = 0
identity = 0
mappings = map.items()
mappings.sort()
i = 0
key_precision, value_precision = precisions
for mapkey, mapvalue in mappings:
mapcomment = ''
if isinstance(mapkey, tuple):
(mapkey, mapcomment) = mapkey
if isinstance(mapvalue, tuple):
(mapvalue, mapcomment) = mapvalue
if mapkey is None:
continue
if (identity and
mapkey == mapvalue and
mapkey < 256):
# No need to include identity mappings, since these
# are already set for the first 256 code points.
continue
key = hexrepr(mapkey, key_precision)
value = hexrepr(mapvalue, value_precision)
if mapcomment and comments:
append(' %s: %s,\t# %s' % (key, value, mapcomment))
else:
append(' %s: %s,' % (key, value))
i += 1
if i == 4096:
# Split the definition into parts to that the Python
# parser doesn't dump core
if splits == 0:
append('}')
else:
append('})')
append('%s.update({' % varname)
i = 0
splits = splits + 1
if splits == 0:
append('}')
else:
append('})')
return l
def python_tabledef_code(varname, map, comments=1, key_precision=2):
l = []
append = l.append
append('%s = (' % varname)
# Analyze map and create table dict
mappings = map.items()
mappings.sort()
table = {}
maxkey = 0
if map.has_key('IDENTITY'):
for key in range(256):
table[key] = (key, '')
maxkey = 255
del map['IDENTITY']
for mapkey, mapvalue in mappings:
mapcomment = ''
if isinstance(mapkey, tuple):
(mapkey, mapcomment) = mapkey
if isinstance(mapvalue, tuple):
(mapvalue, mapcomment) = mapvalue
if mapkey is None:
continue
table[mapkey] = (mapvalue, mapcomment)
if mapkey > maxkey:
maxkey = mapkey
if maxkey > MAX_TABLE_SIZE:
# Table too large
return None
# Create table code
for key in range(maxkey + 1):
if key not in table:
mapvalue = None
mapcomment = 'UNDEFINED'
else:
mapvalue, mapcomment = table[key]
if mapvalue is None:
mapchar = UNI_UNDEFINED
else:
if isinstance(mapvalue, tuple):
# 1-n mappings not supported
return None
else:
mapchar = unichr(mapvalue)
if mapcomment and comments:
append(' %r\t# %s -> %s' % (mapchar,
hexrepr(key, key_precision),
mapcomment))
else:
append(' %r' % mapchar)
append(')')
return l
def codegen(name, map, encodingname, comments=1):
""" Returns Python source for the given map.
Comments are included in the source, if comments is true (default).
"""
# Generate code
decoding_map_code = python_mapdef_code(
'decoding_map',
map,
comments=comments)
decoding_table_code = python_tabledef_code(
'decoding_table',
map,
comments=comments)
encoding_map_code = python_mapdef_code(
'encoding_map',
codecs.make_encoding_map(map),
comments=comments,
precisions=(4, 2))
if decoding_table_code:
suffix = 'table'
else:
suffix = 'map'
l = [
'''\
""" Python Character Mapping Codec %s generated from '%s' with gencodec.py.
"""#"
import codecs
### Codec APIs
class Codec(codecs.Codec):
def encode(self,input,errors='strict'):
return codecs.charmap_encode(input,errors,encoding_%s)
def decode(self,input,errors='strict'):
return codecs.charmap_decode(input,errors,decoding_%s)
''' % (encodingname, name, suffix, suffix)]
l.append('''\
class IncrementalEncoder(codecs.IncrementalEncoder):
def encode(self, input, final=False):
return codecs.charmap_encode(input,self.errors,encoding_%s)[0]
class IncrementalDecoder(codecs.IncrementalDecoder):
def decode(self, input, final=False):
return codecs.charmap_decode(input,self.errors,decoding_%s)[0]''' %
(suffix, suffix))
l.append('''
class StreamWriter(Codec,codecs.StreamWriter):
pass
class StreamReader(Codec,codecs.StreamReader):
pass
### encodings module API
def getregentry():
return codecs.CodecInfo(
name=%r,
encode=Codec().encode,
decode=Codec().decode,
incrementalencoder=IncrementalEncoder,
incrementaldecoder=IncrementalDecoder,
streamreader=StreamReader,
streamwriter=StreamWriter,
)
''' % encodingname.replace('_', '-'))
# Add decoding table or map (with preference to the table)
if not decoding_table_code:
l.append('''
### Decoding Map
''')
l.extend(decoding_map_code)
else:
l.append('''
### Decoding Table
''')
l.extend(decoding_table_code)
# Add encoding map
if decoding_table_code:
l.append('''
### Encoding table
encoding_table=codecs.charmap_build(decoding_table)
''')
else:
l.append('''
### Encoding Map
''')
l.extend(encoding_map_code)
# Final new-line
l.append('')
return '\n'.join(l).expandtabs()
def pymap(name,map,pyfile,encodingname,comments=1):
code = codegen(name,map,encodingname,comments)
f = open(pyfile,'w')
f.write(code)
f.close()
def marshalmap(name,map,marshalfile):
d = {}
for e,(u,c) in map.items():
d[e] = (u,c)
f = open(marshalfile,'wb')
marshal.dump(d,f)
f.close()
def convertdir(dir, dirprefix='', nameprefix='', comments=1):
mapnames = os.listdir(dir)
for mapname in mapnames:
mappathname = os.path.join(dir, mapname)
if not os.path.isfile(mappathname):
continue
name = os.path.split(mapname)[1]
name = name.replace('-','_')
name = name.split('.')[0]
name = name.lower()
name = nameprefix + name
codefile = name + '.py'
marshalfile = name + '.mapping'
print 'converting %s to %s and %s' % (mapname,
dirprefix + codefile,
dirprefix + marshalfile)
try:
map = readmap(os.path.join(dir,mapname))
if not map:
print '* map is empty; skipping'
else:
pymap(mappathname, map, dirprefix + codefile,name,comments)
marshalmap(mappathname, map, dirprefix + marshalfile)
except ValueError, why:
print '* conversion failed: %s' % why
raise
def rewritepythondir(dir, dirprefix='', comments=1):
mapnames = os.listdir(dir)
for mapname in mapnames:
if not mapname.endswith('.mapping'):
continue
name = mapname[:-len('.mapping')]
codefile = name + '.py'
print 'converting %s to %s' % (mapname,
dirprefix + codefile)
try:
map = marshal.load(open(os.path.join(dir,mapname),
'rb'))
if not map:
print '* map is empty; skipping'
else:
pymap(mapname, map, dirprefix + codefile,name,comments)
except ValueError, why:
print '* conversion failed: %s' % why
if __name__ == '__main__':
import sys
if 1:
apply(convertdir,tuple(sys.argv[1:]))
else:
apply(rewritepythondir,tuple(sys.argv[1:]))