ref: 985b2457cda207c2c65edeb647aedbb6e92dac46
dir: /sys/src/cmd/gs/src/gdevdljm.h/
/* Copyright (C) 2000 Aladdin Enterprises. All rights reserved.
This software is provided AS-IS with no warranty, either express or
implied.
This software is distributed under license and may not be copied,
modified or distributed except as expressly authorized under the terms
of the license contained in the file LICENSE in this distribution.
For more information about licensing, please refer to
http://www.ghostscript.com/licensing/. For information on
commercial licensing, go to http://www.artifex.com/licensing/ or
contact Artifex Software, Inc., 101 Lucas Valley Road #110,
San Rafael, CA 94903, U.S.A., +1(415)492-9861.
*/
/* $Id: gdevdljm.h,v 1.8 2004/01/29 18:40:23 ray Exp $ */
/* Interface to generic monochrome H-P DeskJet/LaserJet driver */
#ifndef gdevdljm_INCLUDED
# define gdevdljm_INCLUDED
#include "gdevpcl.h"
/*
* The notion that there is such a thing as a "PCL printer" is a fiction: no
* two "PCL" printers, even at the same PCL level, have identical command
* sets. (The H-P documentation isn't fully accurate either; for example,
* it doesn't reveal that the DeskJet printers implement anything beyond PCL
* 3.)
*
* This file contains feature definitions for a generic monochrome PCL
* driver (gdevdljm.c), and the specific feature values for all such
* printers that Ghostscript currently supports.
*/
/* Printer spacing capabilities. Include at most one of these. */
#define PCL_NO_SPACING 0 /* no vertical spacing capability, must be 0 */
#define PCL3_SPACING 1 /* <ESC>*p+<n>Y (PCL 3) */
#define PCL4_SPACING 2 /* <ESC>*b<n>Y (PCL 4) */
#define PCL5_SPACING 4 /* <ESC>*b<n>Y and clear seed row (PCL 5) */
/* The following is only used internally. */
#define PCL_ANY_SPACING\
(PCL3_SPACING | PCL4_SPACING | PCL5_SPACING)
/* Individual printer properties. Any subset of these may be included. */
#define PCL_MODE_2_COMPRESSION 8 /* compression mode 2 supported */
/* (PCL 4) */
#define PCL_MODE_3_COMPRESSION 16 /* compression modes 2 & 3 supported */
/* (PCL 5) */
#define PCL_END_GRAPHICS_DOES_RESET 32 /* <esc>*rB resets all parameters */
#define PCL_HAS_DUPLEX 64 /* <esc>&l<duplex>S supported */
#define PCL_CAN_SET_PAPER_SIZE 128 /* <esc>&l<sizecode>A supported */
#define PCL_CAN_PRINT_COPIES 256 /* <esc>&l<copies>X supported */
/* Shorthands for the most common spacing/compression combinations. */
#define PCL_MODE0 PCL3_SPACING
#define PCL_MODE0NS PCL_NO_SPACING
#define PCL_MODE2 (PCL4_SPACING | PCL_MODE_2_COMPRESSION)
#define PCL_MODE2P (PCL_NO_SPACING | PCL_MODE_2_COMPRESSION)
#define PCL_MODE3 (PCL5_SPACING | PCL_MODE_3_COMPRESSION)
#define PCL_MODE3NS (PCL_NO_SPACING | PCL_MODE_3_COMPRESSION)
/* Parameters for the printers we know about. */
/* H-P DeskJet */
#define PCL_DJ_FEATURES\
(PCL_MODE2 |\
PCL_END_GRAPHICS_DOES_RESET | PCL_CAN_SET_PAPER_SIZE)
/* H-P DeskJet 500 */
#define PCL_DJ500_FEATURES\
(PCL_MODE3 |\
PCL_END_GRAPHICS_DOES_RESET | PCL_CAN_SET_PAPER_SIZE)
/* Kyocera FS-600 */
#define PCL_FS600_FEATURES\
(PCL_MODE3 |\
PCL_CAN_SET_PAPER_SIZE | PCL_CAN_PRINT_COPIES)
/* H-P original LaserJet */
#define PCL_LJ_FEATURES\
(PCL_MODE0)
/* H-P LaserJet Plus */
#define PCL_LJplus_FEATURES\
(PCL_MODE0)
/* H-P LaserJet IIp, IId */
#define PCL_LJ2p_FEATURES\
(PCL_MODE2P |\
PCL_CAN_SET_PAPER_SIZE)
/* H-P LaserJet III* */
#define PCL_LJ3_FEATURES\
(PCL_MODE3 |\
PCL_CAN_SET_PAPER_SIZE | PCL_CAN_PRINT_COPIES)
/* H-P LaserJet IIId */
#define PCL_LJ3D_FEATURES\
(PCL_MODE3 |\
PCL_HAS_DUPLEX | PCL_CAN_SET_PAPER_SIZE | PCL_CAN_PRINT_COPIES)
/* H-P LaserJet 4 */
#define PCL_LJ4_FEATURES\
(PCL_MODE3 |\
PCL_CAN_SET_PAPER_SIZE | PCL_CAN_PRINT_COPIES)
/* H-P LaserJet 4d */
#define PCL_LJ4D_FEATURES\
(PCL_MODE3 |\
PCL_HAS_DUPLEX | PCL_CAN_SET_PAPER_SIZE | PCL_CAN_PRINT_COPIES)
/* H-P 2563B line printer */
#define PCL_LP2563B_FEATURES\
(PCL_MODE0NS |\
PCL_CAN_SET_PAPER_SIZE)
/* OCE 9050 line printer */
#define PCL_OCE9050_FEATURES\
(PCL_MODE3NS |\
PCL_CAN_SET_PAPER_SIZE)
/* ---------------- Procedures ---------------- */
/* Send a page to the printer. */
int dljet_mono_print_page(
gx_device_printer * pdev, /* from device-specific _print_page */
FILE * prn_stream, /* ibid. */
int dots_per_inch, /* may be a multiple of y resolution */
int features, /* as defined above */
const char *page_init /* page initialization string */
);
int dljet_mono_print_page_copies(
gx_device_printer * pdev,
FILE * prn_stream,
int num_copies,
int dots_per_inch,
int features,
const char *page_init
);
#endif /* gdevdljm_INCLUDED */