ref: 985b2457cda207c2c65edeb647aedbb6e92dac46
dir: /sys/src/cmd/gs/src/gdevwpr2.c/
/* Copyright (C) 1989, 2000 Aladdin Enterprises. All rights reserved.
This software is provided AS-IS with no warranty, either express or
implied.
This software is distributed under license and may not be copied,
modified or distributed except as expressly authorized under the terms
of the license contained in the file LICENSE in this distribution.
For more information about licensing, please refer to
http://www.ghostscript.com/licensing/. For information on
commercial licensing, go to http://www.artifex.com/licensing/ or
contact Artifex Software, Inc., 101 Lucas Valley Road #110,
San Rafael, CA 94903, U.S.A., +1(415)492-9861.
*/
/* $Id: gdevwpr2.c,v 1.18 2004/08/05 17:02:36 stefan Exp $ */
/*
* Microsoft Windows 3.n printer driver for Ghostscript.
* Original version by Russell Lang and
* L. Peter Deutsch, Aladdin Enterprises.
* Modified by rjl 1995-03-29 to use BMP printer code
* Modified by Pierre Arnaud 1999-02-18 (see description below)
* Modified by lpd 1999-04-03 for compatibility with Borland C++ 4.5.
* Modified by Pierre Arnaud 1999-10-03 (accept b&w printing on color printers).
* Modified by Pierre Arnaud 1999-11-20 (accept lower resolution)
* Bug fixed by Pierre Arnaud 2000-03-09 (win_pr2_put_params error when is_open)
* Bug fixed by Pierre Arnaud 2000-03-20 (win_pr2_set_bpp did not set anti_alias)
* Bug fixed by Pierre Arnaud 2000-03-22 (win_pr2_set_bpp depth was wrong)
* Modified by Pierre Arnaud 2000-12-12 (mainly added support for Tumble)
* Bug fixed by Pierre Arnaud 2000-12-18 (-dQueryUser now works from cmd line)
*/
/* This driver uses the printer default size and resolution and
* ignores page size and resolution set using -gWIDTHxHEIGHT and
* -rXxY. You must still set the correct PageSize to get the
* correct clipping path.
* The code in win_pr2_getdc() does try to set the printer page
* size from the PostScript PageSize, but it isn't working
* reliably at the moment.
*
* This driver doesn't work with some Windows printer drivers.
* The reason is unknown. All printers to which I have access
* work.
*
* rjl 1997-11-20
*/
/* Additions by Pierre Arnaud ([email protected])
*
* The driver has been extended in order to provide some run-time
* feed-back about the default Windows printer and to give the user
* the opportunity to select the printer's properties before the
* device gets opened (and any spooling starts).
*
* The driver returns an additional property named "UserSettings".
* This is a dictionary which contens are valid only after setting
* the QueryUser property (see below). The UserSettings dict contains
* the following keys:
*
* DocumentRange [begin end] (int array, can be set)
* Defines the range of pages in the document; [1 10] would
* describe a document starting at page 1 and ending at page 10.
*
* SelectedRange [begin end] (int array, can be set)
* Defines the pages the user wants to print.
*
* MediaSize [width height] (float array, read only)
* Current printer's media size.
*
* Copies n (integer, can be set)
* User selected number of copies.
*
* PrintCopies n (integer, read only)
* Number of copies which must be printed by Ghostscript itself.
* This is still experimental.
*
* DocumentName name (string, can be set)
* Name to be associated with the print job.
*
* UserChangedSettings (bool, read only)
* Set to 'true' if the last QueryUser operation succeeded.
*
* Paper n (integer, can be set)
* Windows paper selection (0 = automatic).
*
* Orient n (integer, can be set)
* Windows paper orientation (0 = automatic).
*
* Color n (integer, can be set)
* Windows color (0 = automatic, 1 = monochrome, 2 = color).
*
* MaxResolution n (integer, can be set)
* Maximum resolution in pixels pet inch (0 = no maximum). If
* the printer has a higher resolution than the maximum, trim
* the used resolution to the best one (dpi_chosen <= dpi_max,
* with dpi_chosen = dpi_printer / ratio).
*/
/* Supported printer parameters are :
*
* -dBitsPerPixel=n
* Override what the Window printer driver returns.
*
* -dNoCancel
* Don't display cancel dialog box. Useful for unattended or
* console EXE operation.
*
* -dQueryUser=n
* Query user interactively for the destination printer, before
* the device gets opened. This fills in the UserSettings dict
* and the OutputFile name properties. The following values are
* supported for n:
* 1 => show standard Print dialog
* 2 => show Print Setup dialog instead
* 3 => select default printer
* other, does nothing
*
* The /Duplex & /Tumble keys of the setpagedevice dict are supported
* if the Windows printer supports duplex printing.
*/
#include "gdevprn.h"
#include "gdevpccm.h"
#include "windows_.h"
#include <shellapi.h>
#include "gp_mswin.h"
#include "gp.h"
#include "gpcheck.h"
#include "commdlg.h"
/* Make sure we cast to the correct structure type. */
typedef struct gx_device_win_pr2_s gx_device_win_pr2;
#undef wdev
#define wdev ((gx_device_win_pr2 *)dev)
/* Device procedures */
/* See gxdevice.h for the definitions of the procedures. */
private dev_proc_open_device(win_pr2_open);
private dev_proc_close_device(win_pr2_close);
private dev_proc_print_page(win_pr2_print_page);
private dev_proc_map_rgb_color(win_pr2_map_rgb_color);
private dev_proc_map_color_rgb(win_pr2_map_color_rgb);
private dev_proc_get_params(win_pr2_get_params);
private dev_proc_put_params(win_pr2_put_params);
private void win_pr2_set_bpp(gx_device * dev, int depth);
private const gx_device_procs win_pr2_procs =
prn_color_params_procs(win_pr2_open, gdev_prn_output_page, win_pr2_close,
win_pr2_map_rgb_color, win_pr2_map_color_rgb,
win_pr2_get_params, win_pr2_put_params);
#define PARENT_WINDOW HWND_DESKTOP
BOOL CALLBACK CancelDlgProc(HWND, UINT, WPARAM, LPARAM);
BOOL CALLBACK AbortProc2(HDC, int);
/* The device descriptor */
typedef struct gx_device_win_pr2_s gx_device_win_pr2;
struct gx_device_win_pr2_s {
gx_device_common;
gx_prn_device_common;
HDC hdcprn;
bool nocancel;
int doc_page_begin; /* first page number in document */
int doc_page_end; /* last page number in document */
int user_page_begin; /* user's choice: first page to print */
int user_page_end; /* user's choice: last page to print */
int user_copies; /* user's choice: number of copies */
int print_copies; /* number of times GS should print each page */
float user_media_size[2]; /* width/height of media selected by user */
char doc_name[200]; /* name of document for the spooler */
char paper_name[64]; /* name of selected paper format */
bool user_changed_settings; /* true if user validated dialog */
int user_paper; /* user's choice: paper format */
int user_orient; /* user's choice: paper orientation */
int user_color; /* user's choice: color format */
int max_dpi; /* maximum resolution in DPI */
int ratio; /* stretch ratio when printing */
int selected_bpp; /* selected bpp, memorised by win_pr2_set_bpp */
bool tumble; /* tumble setting (with duplex) */
int query_user; /* query user (-dQueryUser) */
HANDLE win32_hdevmode; /* handle to device mode information */
HANDLE win32_hdevnames; /* handle to device names information */
DLGPROC lpfnAbortProc;
DLGPROC lpfnCancelProc;
HWND hDlgModeless;
bool use_old_spool_name; /* user prefers old \\spool\ name */
gx_device_win_pr2* original_device; /* used to detect copies */
};
gx_device_win_pr2 far_data gs_mswinpr2_device =
{
prn_device_std_body(gx_device_win_pr2, win_pr2_procs, "mswinpr2",
DEFAULT_WIDTH_10THS, DEFAULT_HEIGHT_10THS, 72.0, 72.0,
0, 0, 0, 0,
0, win_pr2_print_page), /* depth = 0 */
0, /* hdcprn */
0, /* nocancel */
0, /* doc_page_begin */
0, /* doc_page_end */
0, /* user_page_begin */
0, /* user_page_end */
1, /* user_copies */
1, /* print_copies */
{ 0.0, 0.0 }, /* user_media_size */
{ 0 }, /* doc_name */
{ 0 }, /* paper_name */
0, /* user_changed_settings */
0, /* user_paper */
0, /* user_orient */
0, /* user_color */
0, /* max_dpi */
0, /* ratio */
0, /* selected_bpp */
false, /* tumble */
-1, /* query_user */
NULL, /* win32_hdevmode */
NULL, /* win32_hdevnames */
NULL, /* lpfnAbortProc */
NULL, /* lpfnCancelProc */
NULL, /* hDlgModeless */
false, /* use_old_spool_name */
NULL /* original_device */
};
/********************************************************************************/
private int win_pr2_getdc(gx_device_win_pr2 * dev);
private int win_pr2_update_dev(gx_device_win_pr2 * dev, LPDEVMODE pdevmode);
private int win_pr2_update_win(gx_device_win_pr2 * dev, LPDEVMODE pdevmode);
private int win_pr2_print_setup_interaction(gx_device_win_pr2 * dev, int mode);
private int win_pr2_write_user_settings(gx_device_win_pr2 * dev, gs_param_list * plist);
private int win_pr2_read_user_settings(gx_device_win_pr2 * dev, gs_param_list * plist);
private void win_pr2_copy_check(gx_device_win_pr2 * dev);
/********************************************************************************/
/* Open the win_pr2 driver */
private int
win_pr2_open(gx_device * dev)
{
int code;
int depth;
PRINTDLG pd;
POINT offset;
POINT size;
float m[4];
FILE *pfile;
DOCINFO docinfo;
float ratio = 1.0;
win_pr2_copy_check(wdev);
/* get a HDC for the printer */
if ((wdev->win32_hdevmode) &&
(wdev->win32_hdevnames)) {
/* The user has already had the opportunity to choose the output */
/* file interactively. Just use the specified parameters. */
LPDEVMODE devmode = (LPDEVMODE) GlobalLock(wdev->win32_hdevmode);
LPDEVNAMES devnames = (LPDEVNAMES) GlobalLock(wdev->win32_hdevnames);
const char* driver = (char*)(devnames)+(devnames->wDriverOffset);
const char* device = (char*)(devnames)+(devnames->wDeviceOffset);
const char* output = (char*)(devnames)+(devnames->wOutputOffset);
wdev->hdcprn = CreateDC(driver, device, output, devmode);
GlobalUnlock(wdev->win32_hdevmode);
GlobalUnlock(wdev->win32_hdevnames);
if (wdev->hdcprn == NULL) {
return gs_error_Fatal;
}
} else if (!win_pr2_getdc(wdev)) {
/* couldn't get a printer from -sOutputFile= */
/* Prompt with dialog box */
LPDEVMODE devmode = NULL;
memset(&pd, 0, sizeof(pd));
pd.lStructSize = sizeof(pd);
pd.hwndOwner = PARENT_WINDOW;
pd.Flags = PD_RETURNDC;
pd.nMinPage = wdev->doc_page_begin;
pd.nMaxPage = wdev->doc_page_end;
pd.nFromPage = wdev->user_page_begin;
pd.nToPage = wdev->user_page_end;
pd.nCopies = wdev->user_copies;
if (!PrintDlg(&pd)) {
/* device not opened - exit ghostscript */
return gs_error_Fatal; /* exit Ghostscript cleanly */
}
devmode = GlobalLock(pd.hDevMode);
win_pr2_update_dev(wdev,devmode);
GlobalUnlock(pd.hDevMode);
if (wdev->win32_hdevmode)
GlobalFree(wdev->win32_hdevmode);
if (wdev->win32_hdevnames)
GlobalFree(wdev->win32_hdevnames);
wdev->hdcprn = pd.hDC;
wdev->win32_hdevmode = pd.hDevMode;
wdev->win32_hdevnames = pd.hDevNames;
pd.hDevMode = NULL;
pd.hDevNames = NULL;
}
if (!(GetDeviceCaps(wdev->hdcprn, RASTERCAPS) != RC_DIBTODEV)) {
errprintf( "Windows printer does not have RC_DIBTODEV\n");
DeleteDC(wdev->hdcprn);
return gs_error_limitcheck;
}
/* initialise printer, install abort proc */
wdev->lpfnAbortProc = (DLGPROC) AbortProc2;
SetAbortProc(wdev->hdcprn, (ABORTPROC) wdev->lpfnAbortProc);
/*
* Some versions of the Windows headers include lpszDatatype and fwType,
* and some don't. Since we want to set these fields to zero anyway,
* we just start by zeroing the whole structure.
*/
memset(&docinfo, 0, sizeof(docinfo));
docinfo.cbSize = sizeof(docinfo);
docinfo.lpszDocName = wdev->doc_name;
/*docinfo.lpszOutput = NULL;*/
/*docinfo.lpszDatatype = NULL;*/
/*docinfo.fwType = 0;*/
if (docinfo.lpszDocName[0] == 0) {
docinfo.lpszDocName = "Ghostscript output";
}
if (StartDoc(wdev->hdcprn, &docinfo) <= 0) {
errprintf("Printer StartDoc failed (error %08x)\n", GetLastError());
DeleteDC(wdev->hdcprn);
return gs_error_limitcheck;
}
dev->x_pixels_per_inch = (float)GetDeviceCaps(wdev->hdcprn, LOGPIXELSX);
dev->y_pixels_per_inch = (float)GetDeviceCaps(wdev->hdcprn, LOGPIXELSY);
wdev->ratio = 1;
if (wdev->max_dpi > 50) {
float dpi_x = dev->x_pixels_per_inch;
float dpi_y = dev->y_pixels_per_inch;
while ((dev->x_pixels_per_inch > wdev->max_dpi)
|| (dev->y_pixels_per_inch > wdev->max_dpi)) {
ratio += 1.0;
wdev->ratio ++;
dev->x_pixels_per_inch = dpi_x / ratio;
dev->y_pixels_per_inch = dpi_y / ratio;
}
}
size.x = GetDeviceCaps(wdev->hdcprn, PHYSICALWIDTH);
size.y = GetDeviceCaps(wdev->hdcprn, PHYSICALHEIGHT);
gx_device_set_width_height(dev, (int)(size.x / ratio), (int)(size.y / ratio));
offset.x = GetDeviceCaps(wdev->hdcprn, PHYSICALOFFSETX);
offset.y = GetDeviceCaps(wdev->hdcprn, PHYSICALOFFSETY);
/* m[] gives margins in inches */
m[0] /*left */ = offset.x / dev->x_pixels_per_inch / ratio;
m[3] /*top */ = offset.y / dev->y_pixels_per_inch / ratio;
m[2] /*right */ = (size.x - offset.x - GetDeviceCaps(wdev->hdcprn, HORZRES)) / dev->x_pixels_per_inch / ratio;
m[1] /*bottom */ = (size.y - offset.y - GetDeviceCaps(wdev->hdcprn, VERTRES)) / dev->y_pixels_per_inch / ratio;
gx_device_set_margins(dev, m, true);
depth = dev->color_info.depth;
if (depth == 0) {
/* Set parameters that were unknown before opening device */
/* Find out if the device supports color */
/* We recognize 1, 4 (but use only 3), 8 and 24 bit color devices */
depth = GetDeviceCaps(wdev->hdcprn, PLANES) * GetDeviceCaps(wdev->hdcprn, BITSPIXEL);
}
win_pr2_set_bpp(dev, depth);
/* gdev_prn_open opens a temporary file which we don't want */
/* so we specify the name now so we can delete it later */
pfile = gp_open_scratch_file(gp_scratch_file_name_prefix,
wdev->fname, "wb");
fclose(pfile);
code = gdev_prn_open(dev);
/* delete unwanted temporary file */
unlink(wdev->fname);
if (!wdev->nocancel) {
/* inform user of progress with dialog box and allow cancel */
wdev->lpfnCancelProc = (DLGPROC) CancelDlgProc;
wdev->hDlgModeless = CreateDialog(phInstance, "CancelDlgBox",
PARENT_WINDOW, wdev->lpfnCancelProc);
ShowWindow(wdev->hDlgModeless, SW_HIDE);
}
return code;
};
/* Close the win_pr2 driver */
private int
win_pr2_close(gx_device * dev)
{
int code;
int aborted = FALSE;
win_pr2_copy_check(wdev);
/* Free resources */
if (!wdev->nocancel) {
if (!wdev->hDlgModeless)
aborted = TRUE;
else
DestroyWindow(wdev->hDlgModeless);
wdev->hDlgModeless = 0;
}
if (aborted)
AbortDoc(wdev->hdcprn);
else
EndDoc(wdev->hdcprn);
DeleteDC(wdev->hdcprn);
if (wdev->win32_hdevmode != NULL) {
GlobalFree(wdev->win32_hdevmode);
wdev->win32_hdevmode = NULL;
}
if (wdev->win32_hdevnames != NULL) {
GlobalFree(wdev->win32_hdevnames);
wdev->win32_hdevnames = NULL;
}
code = gdev_prn_close(dev);
return code;
}
/* ------ Internal routines ------ */
#undef wdev
#define wdev ((gx_device_win_pr2 *)pdev)
/********************************************************************************/
/* ------ Private definitions ------ */
/* new win_pr2_print_page routine */
/* Write BMP header to memory, then send bitmap to printer */
/* one scan line at a time */
private int
win_pr2_print_page(gx_device_printer * pdev, FILE * file)
{
int raster = gdev_prn_raster(pdev);
/* BMP scan lines are padded to 32 bits. */
ulong bmp_raster = raster + (-raster & 3);
ulong bmp_raster_multi;
int scan_lines, yslice, lines, i;
int width;
int depth = pdev->color_info.depth;
byte *row;
int y;
int code = 0; /* return code */
MSG msg;
char dlgtext[32];
HGLOBAL hrow;
int ratio = ((gx_device_win_pr2 *)pdev)->ratio;
struct bmi_s {
BITMAPINFOHEADER h;
RGBQUAD pal[256];
} bmi;
scan_lines = dev_print_scan_lines(pdev);
width = (int)(pdev->width - ((dev_l_margin(pdev) + dev_r_margin(pdev) -
dev_x_offset(pdev)) * pdev->x_pixels_per_inch));
yslice = 65535 / bmp_raster; /* max lines in 64k */
bmp_raster_multi = bmp_raster * yslice;
hrow = GlobalAlloc(0, bmp_raster_multi);
row = GlobalLock(hrow);
if (row == 0) /* can't allocate row buffer */
return_error(gs_error_VMerror);
/* Write the info header. */
bmi.h.biSize = sizeof(bmi.h);
bmi.h.biWidth = pdev->width; /* wdev->mdev.width; */
bmi.h.biHeight = yslice;
bmi.h.biPlanes = 1;
bmi.h.biBitCount = pdev->color_info.depth;
bmi.h.biCompression = 0;
bmi.h.biSizeImage = 0; /* default */
bmi.h.biXPelsPerMeter = 0; /* default */
bmi.h.biYPelsPerMeter = 0; /* default */
StartPage(wdev->hdcprn);
/* Write the palette. */
if (depth <= 8) {
int i;
gx_color_value rgb[3];
LPRGBQUAD pq;
bmi.h.biClrUsed = 1 << depth;
bmi.h.biClrImportant = 1 << depth;
for (i = 0; i != 1 << depth; i++) {
(*dev_proc(pdev, map_color_rgb)) ((gx_device *) pdev,
(gx_color_index) i, rgb);
pq = &bmi.pal[i];
pq->rgbRed = gx_color_value_to_byte(rgb[0]);
pq->rgbGreen = gx_color_value_to_byte(rgb[1]);
pq->rgbBlue = gx_color_value_to_byte(rgb[2]);
pq->rgbReserved = 0;
}
} else {
bmi.h.biClrUsed = 0;
bmi.h.biClrImportant = 0;
}
if (!wdev->nocancel) {
sprintf(dlgtext, "Printing page %d", (int)(pdev->PageCount) + 1);
SetWindowText(GetDlgItem(wdev->hDlgModeless, CANCEL_PRINTING), dlgtext);
ShowWindow(wdev->hDlgModeless, SW_SHOW);
}
for (y = 0; y < scan_lines;) {
/* copy slice to row buffer */
if (y > scan_lines - yslice)
lines = scan_lines - y;
else
lines = yslice;
for (i = 0; i < lines; i++)
gdev_prn_copy_scan_lines(pdev, y + i,
row + (bmp_raster * (lines - 1 - i)), raster);
if (ratio > 1) {
StretchDIBits(wdev->hdcprn, 0, y*ratio, pdev->width*ratio, lines*ratio,
0, 0, pdev->width, lines,
row,
(BITMAPINFO FAR *) & bmi, DIB_RGB_COLORS, SRCCOPY);
} else {
SetDIBitsToDevice(wdev->hdcprn, 0, y, pdev->width, lines,
0, 0, 0, lines,
row,
(BITMAPINFO FAR *) & bmi, DIB_RGB_COLORS);
}
y += lines;
if (!wdev->nocancel) {
/* inform user of progress */
sprintf(dlgtext, "%d%% done", (int)(y * 100L / scan_lines));
SetWindowText(GetDlgItem(wdev->hDlgModeless, CANCEL_PCDONE), dlgtext);
}
/* process message loop */
while (PeekMessage(&msg, wdev->hDlgModeless, 0, 0, PM_REMOVE)) {
if ((wdev->hDlgModeless == 0) || !IsDialogMessage(wdev->hDlgModeless, &msg)) {
TranslateMessage(&msg);
DispatchMessage(&msg);
}
}
if ((!wdev->nocancel) && (wdev->hDlgModeless == 0)) {
/* user pressed cancel button */
break;
}
}
if ((!wdev->nocancel) && (wdev->hDlgModeless == 0))
code = gs_error_Fatal; /* exit Ghostscript cleanly */
else {
/* push out the page */
if (!wdev->nocancel)
SetWindowText(GetDlgItem(wdev->hDlgModeless, CANCEL_PCDONE),
"Ejecting page...");
EndPage(wdev->hdcprn);
if (!wdev->nocancel)
ShowWindow(wdev->hDlgModeless, SW_HIDE);
}
GlobalUnlock(hrow);
GlobalFree(hrow);
return code;
}
/* combined color mappers */
/* 24-bit color mappers (taken from gdevmem2.c). */
/* Note that Windows expects RGB values in the order B,G,R. */
/* Map a r-g-b color to a color index. */
private gx_color_index
win_pr2_map_rgb_color(gx_device * dev, const gx_color_value cv[])
{
gx_color_value r = cv[0];
gx_color_value g = cv[1];
gx_color_value b = cv[2];
switch (dev->color_info.depth) {
case 1:
return gdev_prn_map_rgb_color(dev, cv);
case 4:
/* use only 8 colors */
return (r > (gx_max_color_value / 2 + 1) ? 4 : 0) +
(g > (gx_max_color_value / 2 + 1) ? 2 : 0) +
(b > (gx_max_color_value / 2 + 1) ? 1 : 0);
case 8:
return pc_8bit_map_rgb_color(dev, cv);
case 24:
return gx_color_value_to_byte(r) +
((uint) gx_color_value_to_byte(g) << 8) +
((ulong) gx_color_value_to_byte(b) << 16);
}
return 0; /* error */
}
/* Map a color index to a r-g-b color. */
private int
win_pr2_map_color_rgb(gx_device * dev, gx_color_index color,
gx_color_value prgb[3])
{
switch (dev->color_info.depth) {
case 1:
gdev_prn_map_color_rgb(dev, color, prgb);
break;
case 4:
/* use only 8 colors */
prgb[0] = (color & 4) ? gx_max_color_value : 0;
prgb[1] = (color & 2) ? gx_max_color_value : 0;
prgb[2] = (color & 1) ? gx_max_color_value : 0;
break;
case 8:
pc_8bit_map_color_rgb(dev, color, prgb);
break;
case 24:
prgb[2] = gx_color_value_from_byte(color >> 16);
prgb[1] = gx_color_value_from_byte((color >> 8) & 0xff);
prgb[0] = gx_color_value_from_byte(color & 0xff);
break;
}
return 0;
}
void
win_pr2_set_bpp(gx_device * dev, int depth)
{
if (depth > 8) {
static const gx_device_color_info win_pr2_24color = dci_std_color(24);
dev->color_info = win_pr2_24color;
depth = 24;
} else if (depth >= 8) {
/* 8-bit (SuperVGA-style) color. */
/* (Uses a fixed palette of 3,3,2 bits.) */
static const gx_device_color_info win_pr2_8color = dci_pc_8bit;
dev->color_info = win_pr2_8color;
depth = 8;
} else if (depth >= 3) {
/* 3 plane printer */
/* suitable for impact dot matrix CMYK printers */
/* create 4-bit bitmap, but only use 8 colors */
static const gx_device_color_info win_pr2_4color = dci_values(3, 4, 1, 1, 2, 2);
dev->color_info = win_pr2_4color;
depth = 4;
} else { /* default is black_and_white */
static const gx_device_color_info win_pr2_1color = dci_std_color(1);
dev->color_info = win_pr2_1color;
depth = 1;
}
((gx_device_win_pr2 *)dev)->selected_bpp = depth;
/* copy encode/decode procedures */
dev->procs.encode_color = dev->procs.map_rgb_color;
dev->procs.decode_color = dev->procs.map_color_rgb;
if (depth == 1) {
dev->procs.get_color_mapping_procs =
gx_default_DevGray_get_color_mapping_procs;
dev->procs.get_color_comp_index =
gx_default_DevGray_get_color_comp_index;
}
else {
dev->procs.get_color_mapping_procs =
gx_default_DevRGB_get_color_mapping_procs;
dev->procs.get_color_comp_index =
gx_default_DevRGB_get_color_comp_index;
}
}
/********************************************************************************/
/* Get device parameters */
int
win_pr2_get_params(gx_device * pdev, gs_param_list * plist)
{
int code = gdev_prn_get_params(pdev, plist);
win_pr2_copy_check(wdev);
if (code >= 0)
code = param_write_bool(plist, "NoCancel",
&(wdev->nocancel));
if (code >= 0)
code = param_write_int(plist, "QueryUser",
&(wdev->query_user));
if (code >= 0)
code = win_pr2_write_user_settings(wdev, plist);
if ((code >= 0) && (wdev->Duplex_set > 0))
code = param_write_bool(plist, "Tumble",
&(wdev->tumble));
return code;
}
/* We implement this ourselves so that we can change BitsPerPixel */
/* before the device is opened */
int
win_pr2_put_params(gx_device * pdev, gs_param_list * plist)
{
int ecode = 0, code;
int old_bpp = pdev->color_info.depth;
int bpp = old_bpp;
bool tumble = wdev->tumble;
bool nocancel = wdev->nocancel;
int queryuser = 0;
bool old_duplex = wdev->Duplex;
bool old_tumble = wdev->tumble;
int old_orient = wdev->user_orient;
int old_color = wdev->user_color;
int old_paper = wdev->user_paper;
int old_mx_dpi = wdev->max_dpi;
if (wdev->Duplex_set < 0) {
wdev->Duplex_set = 0;
wdev->Duplex = false;
wdev->tumble = false;
}
win_pr2_copy_check(wdev);
code = win_pr2_read_user_settings(wdev, plist);
switch (code = param_read_int(plist, "BitsPerPixel", &bpp)) {
case 0:
if (pdev->is_open) {
if (wdev->selected_bpp == bpp) {
break;
}
ecode = gs_error_rangecheck;
} else { /* change dev->color_info is valid before device is opened */
win_pr2_set_bpp(pdev, bpp);
break;
}
goto bppe;
default:
ecode = code;
bppe:param_signal_error(plist, "BitsPerPixel", ecode);
case 1:
break;
}
switch (code = param_read_bool(plist, "NoCancel", &nocancel)) {
case 0:
if (pdev->is_open) {
if (wdev->nocancel == nocancel) {
break;
}
ecode = gs_error_rangecheck;
} else {
wdev->nocancel = nocancel;
break;
}
goto nocancele;
default:
ecode = code;
nocancele:param_signal_error(plist, "NoCancel", ecode);
case 1:
break;
}
switch (code = param_read_bool(plist, "Tumble", &tumble)) {
case 0:
wdev->tumble = tumble;
break;
default:
ecode = code;
param_signal_error(plist, "Tumble", ecode);
case 1:
break;
}
switch (code = param_read_int(plist, "QueryUser", &queryuser)) {
case 0:
if ((queryuser > 0) &&
(queryuser < 4)) {
win_pr2_print_setup_interaction(wdev, queryuser);
}
break;
default:
ecode = code;
param_signal_error(plist, "QueryUser", ecode);
case 1:
break;
}
if (ecode >= 0)
ecode = gdev_prn_put_params(pdev, plist);
if (wdev->win32_hdevmode && wdev->hdcprn) {
if ( (old_duplex != wdev->Duplex)
|| (old_tumble != wdev->tumble)
|| (old_orient != wdev->user_orient)
|| (old_color != wdev->user_color)
|| (old_paper != wdev->user_paper)
|| (old_mx_dpi != wdev->max_dpi) ) {
LPDEVMODE pdevmode = GlobalLock(wdev->win32_hdevmode);
if (pdevmode) {
win_pr2_update_win(wdev, pdevmode);
ResetDC(wdev->hdcprn, pdevmode);
GlobalUnlock(pdevmode);
}
}
}
return ecode;
}
#undef wdev
/********************************************************************************/
/* Get Device Context for printer */
private int
win_pr2_getdc(gx_device_win_pr2 * wdev)
{
char *device;
char *devices;
char *p;
char driverbuf[512];
char *driver;
char *output;
char *devcap;
int devcapsize;
int size;
int i, n;
POINT *pp;
int paperindex;
int paperwidth, paperheight;
int orientation;
int papersize;
char papername[64];
char drvname[32];
HINSTANCE hlib;
LPFNDEVMODE pfnExtDeviceMode;
LPFNDEVCAPS pfnDeviceCapabilities;
LPDEVMODE podevmode, pidevmode;
HANDLE hprinter;
/* first try to derive the printer name from -sOutputFile= */
/* is printer if name prefixed by \\spool\ or by %printer% */
if (is_spool(wdev->fname)) {
device = wdev->fname + 8; /* skip over \\spool\ */
wdev->use_old_spool_name = true;
} else if (strncmp("%printer%",wdev->fname,9) == 0) {
device = wdev->fname + 9; /* skip over %printer% */
wdev->use_old_spool_name = false;
} else {
return FALSE;
}
/* now try to match the printer name against the [Devices] section */
if ((devices = gs_malloc(wdev->memory, 4096, 1, "win_pr2_getdc")) == (char *)NULL)
return FALSE;
GetProfileString("Devices", NULL, "", devices, 4096);
p = devices;
while (*p) {
if (stricmp(p, device) == 0)
break;
p += strlen(p) + 1;
}
if (*p == '\0')
p = NULL;
gs_free(wdev->memory, devices, 4096, 1, "win_pr2_getdc");
if (p == NULL)
return FALSE; /* doesn't match an available printer */
/* the printer exists, get the remaining information from win.ini */
GetProfileString("Devices", device, "", driverbuf, sizeof(driverbuf));
driver = strtok(driverbuf, ",");
output = strtok(NULL, ",");
if (is_win32s)
{
strcpy(drvname, driver);
strcat(drvname, ".drv");
driver = drvname;
}
if (!is_win32s) { /* Win32 */
if (!OpenPrinter(device, &hprinter, NULL))
return FALSE;
size = DocumentProperties(NULL, hprinter, device, NULL, NULL, 0);
if ((podevmode = gs_malloc(wdev->memory, size, 1, "win_pr2_getdc")) == (LPDEVMODE) NULL) {
ClosePrinter(hprinter);
return FALSE;
}
if ((pidevmode = gs_malloc(wdev->memory, size, 1, "win_pr2_getdc")) == (LPDEVMODE) NULL) {
gs_free(wdev->memory, podevmode, size, 1, "win_pr2_getdc");
ClosePrinter(hprinter);
return FALSE;
}
DocumentProperties(NULL, hprinter, device, podevmode, NULL, DM_OUT_BUFFER);
pfnDeviceCapabilities = (LPFNDEVCAPS) DeviceCapabilities;
} else
{ /* Win16 and Win32s */
/* now load the printer driver */
hlib = LoadLibrary(driver);
if (hlib < (HINSTANCE) HINSTANCE_ERROR)
return FALSE;
/* call ExtDeviceMode() to get default parameters */
pfnExtDeviceMode = (LPFNDEVMODE) GetProcAddress(hlib, "ExtDeviceMode");
if (pfnExtDeviceMode == (LPFNDEVMODE) NULL) {
FreeLibrary(hlib);
return FALSE;
}
pfnDeviceCapabilities = (LPFNDEVCAPS) GetProcAddress(hlib, "DeviceCapabilities");
if (pfnDeviceCapabilities == (LPFNDEVCAPS) NULL) {
FreeLibrary(hlib);
return FALSE;
}
size = pfnExtDeviceMode(NULL, hlib, NULL, device, output, NULL, NULL, 0);
if ((podevmode = gs_malloc(wdev->memory, size, 1, "win_pr2_getdc")) == (LPDEVMODE) NULL) {
FreeLibrary(hlib);
return FALSE;
}
if ((pidevmode = gs_malloc(wdev->memory, size, 1, "win_pr2_getdc")) == (LPDEVMODE) NULL) {
gs_free(wdev->memory, podevmode, size, 1, "win_pr2_getdc");
FreeLibrary(hlib);
return FALSE;
}
pfnExtDeviceMode(NULL, hlib, podevmode, device, output,
NULL, NULL, DM_OUT_BUFFER);
}
/* now find out what paper sizes are available */
devcapsize = pfnDeviceCapabilities(device, output, DC_PAPERSIZE, NULL, NULL);
devcapsize *= sizeof(POINT);
if ((devcap = gs_malloc(wdev->memory, devcapsize, 1, "win_pr2_getdc")) == (LPBYTE) NULL)
return FALSE;
n = pfnDeviceCapabilities(device, output, DC_PAPERSIZE, devcap, NULL);
paperwidth = (int)(wdev->MediaSize[0] * 254 / 72);
paperheight = (int)(wdev->MediaSize[1] * 254 / 72);
papername[0] = '\0';
papersize = 0;
paperindex = -1;
orientation = 0;
pp = (POINT *) devcap;
for (i = 0; i < n; i++, pp++) {
if ((pp->x < paperwidth + 20) && (pp->x > paperwidth - 20) &&
(pp->y < paperheight + 20) && (pp->y > paperheight - 20)) {
paperindex = i;
paperwidth = pp->x;
paperheight = pp->y;
orientation = DMORIENT_PORTRAIT;
break;
}
}
if (paperindex < 0) {
/* try again in landscape */
pp = (POINT *) devcap;
for (i = 0; i < n; i++, pp++) {
if ((pp->x < paperheight + 20) && (pp->x > paperheight - 20) &&
(pp->y < paperwidth + 20) && (pp->y > paperwidth - 20)) {
paperindex = i;
paperwidth = pp->x;
paperheight = pp->y;
orientation = DMORIENT_LANDSCAPE;
break;
}
}
}
gs_free(wdev->memory, devcap, devcapsize, 1, "win_pr2_getdc");
/* get the dmPaperSize */
devcapsize = pfnDeviceCapabilities(device, output, DC_PAPERS, NULL, NULL);
devcapsize *= sizeof(WORD);
if ((devcap = gs_malloc(wdev->memory, devcapsize, 1, "win_pr2_getdc")) == (LPBYTE) NULL)
return FALSE;
n = pfnDeviceCapabilities(device, output, DC_PAPERS, devcap, NULL);
if ((paperindex >= 0) && (paperindex < n))
papersize = ((WORD *) devcap)[paperindex];
gs_free(wdev->memory, devcap, devcapsize, 1, "win_pr2_getdc");
/* get the paper name */
devcapsize = pfnDeviceCapabilities(device, output, DC_PAPERNAMES, NULL, NULL);
devcapsize *= 64;
if ((devcap = gs_malloc(wdev->memory, devcapsize, 1, "win_pr2_getdc")) == (LPBYTE) NULL)
return FALSE;
n = pfnDeviceCapabilities(device, output, DC_PAPERNAMES, devcap, NULL);
if ((paperindex >= 0) && (paperindex < n))
strcpy(papername, devcap + paperindex * 64);
gs_free(wdev->memory, devcap, devcapsize, 1, "win_pr2_getdc");
memcpy(pidevmode, podevmode, size);
pidevmode->dmFields = 0;
wdev->paper_name[0] = 0;
if ( (wdev->user_paper)
&& (wdev->user_paper != papersize) ) {
papersize = wdev->user_paper;
paperheight = 0;
paperwidth = 0;
papername[0] = 0;
}
if (wdev->user_orient) {
orientation = wdev->user_orient;
}
pidevmode->dmFields &= ~(DM_PAPERSIZE | DM_ORIENTATION | DM_COLOR | DM_PAPERLENGTH | DM_PAPERWIDTH | DM_DUPLEX);
pidevmode->dmFields |= DM_DEFAULTSOURCE;
pidevmode->dmDefaultSource = 0;
if (orientation) {
wdev->user_orient = orientation;
}
if (papersize) {
wdev->user_paper = papersize;
strcpy (wdev->paper_name, papername);
}
if (paperheight && paperwidth) {
pidevmode->dmFields |= (DM_PAPERLENGTH | DM_PAPERWIDTH);
pidevmode->dmPaperWidth = paperwidth;
pidevmode->dmPaperLength = paperheight;
wdev->user_media_size[0] = paperwidth / 254.0 * 72.0;
wdev->user_media_size[1] = paperheight / 254.0 * 72.0;
}
if (DeviceCapabilities(device, output, DC_DUPLEX, NULL, NULL)) {
wdev->Duplex_set = 1;
}
win_pr2_update_win(wdev, pidevmode);
if (!is_win32s) {
/* merge the entries */
DocumentProperties(NULL, hprinter, device, podevmode, pidevmode, DM_IN_BUFFER | DM_OUT_BUFFER);
ClosePrinter(hprinter);
/* now get a DC */
wdev->hdcprn = CreateDC(driver, device, NULL, podevmode);
} else
{ /* Win16 and Win32s */
pfnExtDeviceMode(NULL, hlib, podevmode, device, output,
pidevmode, NULL, DM_IN_BUFFER | DM_OUT_BUFFER);
/* release the printer driver */
FreeLibrary(hlib);
/* now get a DC */
if (is_win32s)
strtok(driver, "."); /* remove .drv */
wdev->hdcprn = CreateDC(driver, device, output, podevmode);
}
if (wdev->win32_hdevmode == NULL) {
wdev->win32_hdevmode = GlobalAlloc(0, sizeof(DEVMODE));
}
if (wdev->win32_hdevmode) {
LPDEVMODE pdevmode = (LPDEVMODE) GlobalLock(wdev->win32_hdevmode);
if (pdevmode) {
memcpy(pdevmode, podevmode, sizeof(DEVMODE));
GlobalUnlock(wdev->win32_hdevmode);
}
}
gs_free(wdev->memory, pidevmode, size, 1, "win_pr2_getdc");
gs_free(wdev->memory, podevmode, size, 1, "win_pr2_getdc");
if (wdev->hdcprn != (HDC) NULL)
return TRUE; /* success */
/* fall back to prompting user */
return FALSE;
}
/*
* Minimalist update of the wdev parameters (mainly for the
* UserSettings parameters).
*/
private int
win_pr2_update_dev(gx_device_win_pr2 * dev, LPDEVMODE pdevmode)
{
if (pdevmode == 0)
return FALSE;
if (pdevmode->dmFields & DM_COLOR) {
dev->user_color = pdevmode->dmColor;
}
if (pdevmode->dmFields & DM_ORIENTATION) {
dev->user_orient = pdevmode->dmOrientation;
}
if (pdevmode->dmFields & DM_PAPERSIZE) {
dev->user_paper = pdevmode->dmPaperSize;
dev->user_media_size[0] = pdevmode->dmPaperWidth / 254.0 * 72.0;
dev->user_media_size[1] = pdevmode->dmPaperLength / 254.0 * 72.0;
dev->paper_name[0] = 0; /* unknown paper size */
}
if (pdevmode->dmFields & DM_DUPLEX) {
dev->Duplex_set = 1;
dev->Duplex = pdevmode->dmDuplex == DMDUP_SIMPLEX ? false : true;
dev->tumble = pdevmode->dmDuplex == DMDUP_HORIZONTAL ? true : false;
}
return TRUE;
}
private int
win_pr2_update_win(gx_device_win_pr2 * dev, LPDEVMODE pdevmode)
{
if (dev->Duplex_set > 0) {
pdevmode->dmFields |= DM_DUPLEX;
pdevmode->dmDuplex = DMDUP_SIMPLEX;
if (dev->Duplex) {
if (dev->tumble == false) {
pdevmode->dmDuplex = DMDUP_VERTICAL;
} else {
pdevmode->dmDuplex = DMDUP_HORIZONTAL;
}
}
}
if (dev->user_color) {
pdevmode->dmColor = dev->user_color;
pdevmode->dmFields |= DM_COLOR;
}
if (dev->user_orient) {
pdevmode->dmFields |= DM_ORIENTATION;
pdevmode->dmOrientation = dev->user_orient;
}
if (dev->user_paper) {
pdevmode->dmFields |= DM_PAPERSIZE;
pdevmode->dmPaperSize = dev->user_paper;
}
return 0;
}
/********************************************************************************/
#define BEGIN_ARRAY_PARAM(pread, pname, pa, psize, e)\
switch ( code = pread(dict.list, (param_name = pname), &(pa)) )\
{\
case 0:\
if ( (pa).size != psize )\
ecode = gs_note_error(gs_error_rangecheck);\
else {
/* The body of the processing code goes here. */
/* If it succeeds, it should do a 'break'; */
/* if it fails, it should set ecode and fall through. */
#define END_ARRAY_PARAM(pa, e)\
}\
goto e;\
default:\
ecode = code;\
e: param_signal_error(dict.list, param_name, ecode);\
case 1:\
(pa).data = 0; /* mark as not filled */\
}
/* Put the user params from UserSettings into our */
/* internal variables. */
private int
win_pr2_read_user_settings(gx_device_win_pr2 * wdev, gs_param_list * plist)
{
gs_param_dict dict;
gs_param_string docn = { 0 };
const char* dict_name = "UserSettings";
const char* param_name = "";
int code = 0;
int ecode = 0;
switch (code = param_begin_read_dict(plist, dict_name, &dict, false)) {
default:
param_signal_error(plist, dict_name, code);
return code;
case 1:
break;
case 0:
{
gs_param_int_array ia;
BEGIN_ARRAY_PARAM(param_read_int_array, "DocumentRange", ia, 2, ia)
if ((ia.data[0] < 0) ||
(ia.data[1] < 0) ||
(ia.data[0] > ia.data[1]))
ecode = gs_note_error(gs_error_rangecheck);
wdev->doc_page_begin = ia.data[0];
wdev->doc_page_end = ia.data[1];
END_ARRAY_PARAM(ia, doc_range_error)
BEGIN_ARRAY_PARAM(param_read_int_array, "SelectedRange", ia, 2, ia)
if ((ia.data[0] < 0) ||
(ia.data[1] < 0) ||
(ia.data[0] > ia.data[1]))
ecode = gs_note_error(gs_error_rangecheck);
wdev->user_page_begin = ia.data[0];
wdev->user_page_end = ia.data[1];
END_ARRAY_PARAM(ia, sel_range_error)
param_read_int(dict.list, "Copies", &wdev->user_copies);
param_read_int(dict.list, "Paper", &wdev->user_paper);
param_read_int(dict.list, "Orientation", &wdev->user_orient);
param_read_int(dict.list, "Color", &wdev->user_color);
param_read_int(dict.list, "MaxResolution", &wdev->max_dpi);
switch (code = param_read_string(dict.list, (param_name = "DocumentName"), &docn)) {
case 0:
if (docn.size < sizeof(wdev->doc_name))
break;
code = gs_error_rangecheck;
/* fall through */
default:
ecode = code;
param_signal_error(plist, param_name, ecode);
/* fall through */
case 1:
docn.data = 0;
break;
}
param_end_read_dict(plist, dict_name, &dict);
if (docn.data) {
memcpy(wdev->doc_name, docn.data, docn.size);
wdev->doc_name[docn.size] = 0;
}
wdev->print_copies = 1;
if (wdev->win32_hdevmode) {
LPDEVMODE devmode = (LPDEVMODE) GlobalLock(wdev->win32_hdevmode);
if (devmode) {
devmode->dmCopies = wdev->user_copies;
devmode->dmPaperSize = wdev->user_paper;
devmode->dmOrientation = wdev->user_orient;
devmode->dmColor = wdev->user_color;
GlobalUnlock(wdev->win32_hdevmode);
}
}
}
break;
}
return code;
}
private int
win_pr2_write_user_settings(gx_device_win_pr2 * wdev, gs_param_list * plist)
{
gs_param_dict dict;
gs_param_int_array range;
gs_param_float_array box;
gs_param_string docn;
gs_param_string papn;
int array[2];
const char* pname = "UserSettings";
int code;
dict.size = 12;
code = param_begin_write_dict(plist, pname, &dict, false);
if (code < 0) return code;
array[0] = wdev->doc_page_begin;
array[1] = wdev->doc_page_end;
range.data = array;
range.size = 2;
range.persistent = false;
code = param_write_int_array(dict.list, "DocumentRange", &range);
if (code < 0) goto error;
array[0] = wdev->user_page_begin;
array[1] = wdev->user_page_end;
range.data = array;
range.size = 2;
range.persistent = false;
code = param_write_int_array(dict.list, "SelectedRange", &range);
if (code < 0) goto error;
box.data = wdev->user_media_size;
box.size = 2;
box.persistent = false;
code = param_write_float_array(dict.list, "MediaSize", &box);
if (code < 0) goto error;
code = param_write_int(dict.list, "Copies", &wdev->user_copies);
if (code < 0) goto error;
code = param_write_int(dict.list, "Paper", &wdev->user_paper);
if (code < 0) goto error;
code = param_write_int(dict.list, "Orientation", &wdev->user_orient);
if (code < 0) goto error;
code = param_write_int(dict.list, "Color", &wdev->user_color);
if (code < 0) goto error;
code = param_write_int(dict.list, "MaxResolution", &wdev->max_dpi);
if (code < 0) goto error;
code = param_write_int(dict.list, "PrintCopies", &wdev->print_copies);
if (code < 0) goto error;
docn.data = (const byte*)wdev->doc_name;
docn.size = strlen(wdev->doc_name);
docn.persistent = false;
code = param_write_string(dict.list, "DocumentName", &docn);
if (code < 0) goto error;
papn.data = (const byte*)wdev->paper_name;
papn.size = strlen(wdev->paper_name);
papn.persistent = false;
code = param_write_string(dict.list, "PaperName", &papn);
if (code < 0) goto error;
code = param_write_bool(dict.list, "UserChangedSettings", &wdev->user_changed_settings);
error:
param_end_write_dict(plist, pname, &dict);
return code;
}
/********************************************************************************/
/* Show up a dialog for the user to choose a printer and a paper size.
* If mode == 3, then automatically select the default Windows printer
* instead of asking the user.
*/
private int
win_pr2_print_setup_interaction(gx_device_win_pr2 * wdev, int mode)
{
PRINTDLG pd;
LPDEVMODE devmode;
LPDEVNAMES devnames;
wdev->user_changed_settings = FALSE;
wdev->query_user = mode;
memset(&pd, 0, sizeof(pd));
pd.lStructSize = sizeof(pd);
pd.hwndOwner = PARENT_WINDOW;
switch (mode) {
case 2: pd.Flags = PD_PRINTSETUP; break;
case 3: pd.Flags = PD_RETURNDEFAULT; break;
default: pd.Flags = 0; break;
}
pd.Flags |= PD_USEDEVMODECOPIES;
pd.nMinPage = wdev->doc_page_begin;
pd.nMaxPage = wdev->doc_page_end;
pd.nFromPage = wdev->user_page_begin;
pd.nToPage = wdev->user_page_end;
pd.nCopies = wdev->user_copies;
/* Show the Print Setup dialog and let the user choose a printer
* and a paper size/orientation.
*/
if (!PrintDlg(&pd)) return FALSE;
devmode = (LPDEVMODE) GlobalLock(pd.hDevMode);
devnames = (LPDEVNAMES) GlobalLock(pd.hDevNames);
wdev->user_changed_settings = TRUE;
if (wdev->use_old_spool_name) {
sprintf(wdev->fname, "\\\\spool\\%s", (char*)(devnames)+(devnames->wDeviceOffset));
} else {
sprintf(wdev->fname, "%%printer%%%s", (char*)(devnames)+(devnames->wDeviceOffset));
}
if (mode == 3) {
devmode->dmCopies = wdev->user_copies * wdev->print_copies;
pd.nCopies = 1;
}
wdev->user_page_begin = pd.nFromPage;
wdev->user_page_end = pd.nToPage;
wdev->user_copies = devmode->dmCopies;
wdev->print_copies = pd.nCopies;
wdev->user_media_size[0] = devmode->dmPaperWidth / 254.0 * 72.0;
wdev->user_media_size[1] = devmode->dmPaperLength / 254.0 * 72.0;
wdev->user_paper = devmode->dmPaperSize;
wdev->user_orient = devmode->dmOrientation;
wdev->user_color = devmode->dmColor;
if (devmode->dmFields & DM_DUPLEX) {
wdev->Duplex_set = 1;
wdev->Duplex = devmode->dmDuplex == DMDUP_SIMPLEX ? false : true;
wdev->tumble = devmode->dmDuplex == DMDUP_HORIZONTAL ? true : false;
}
{
float xppinch = 0;
float yppinch = 0;
const char* driver = (char*)(devnames)+(devnames->wDriverOffset);
const char* device = (char*)(devnames)+(devnames->wDeviceOffset);
const char* output = (char*)(devnames)+(devnames->wOutputOffset);
HDC hic = CreateIC(driver, device, output, devmode);
if (hic) {
xppinch = (float)GetDeviceCaps(hic, LOGPIXELSX);
yppinch = (float)GetDeviceCaps(hic, LOGPIXELSY);
wdev->user_media_size[0] = GetDeviceCaps(hic, PHYSICALWIDTH) * 72.0 / xppinch;
wdev->user_media_size[1] = GetDeviceCaps(hic, PHYSICALHEIGHT) * 72.0 / yppinch;
DeleteDC(hic);
}
}
devmode = NULL;
devnames = NULL;
GlobalUnlock(pd.hDevMode);
GlobalUnlock(pd.hDevNames);
if (wdev->win32_hdevmode != NULL) {
GlobalFree(wdev->win32_hdevmode);
}
if (wdev->win32_hdevnames != NULL) {
GlobalFree(wdev->win32_hdevnames);
}
wdev->win32_hdevmode = pd.hDevMode;
wdev->win32_hdevnames = pd.hDevNames;
return TRUE;
}
/* Check that we are dealing with an original device. If this
* happens to be a copy made by "copydevice", we will have to
* copy the original's handles to the associated Win32 params.
*/
private void
win_pr2_copy_check(gx_device_win_pr2 * wdev)
{
HGLOBAL hdevmode = wdev->win32_hdevmode;
HGLOBAL hdevnames = wdev->win32_hdevnames;
DWORD devmode_len = (hdevmode) ? GlobalSize(hdevmode) : 0;
DWORD devnames_len = (hdevnames) ? GlobalSize(hdevnames) : 0;
if (wdev->original_device == wdev)
return;
wdev->hdcprn = NULL;
wdev->win32_hdevmode = NULL;
wdev->win32_hdevnames = NULL;
wdev->original_device = wdev;
if (devmode_len) {
wdev->win32_hdevmode = GlobalAlloc(0, devmode_len);
if (wdev->win32_hdevmode) {
memcpy(GlobalLock(wdev->win32_hdevmode), GlobalLock(hdevmode), devmode_len);
GlobalUnlock(wdev->win32_hdevmode);
GlobalUnlock(hdevmode);
}
}
if (devnames_len) {
wdev->win32_hdevnames = GlobalAlloc(0, devnames_len);
if (wdev->win32_hdevnames) {
memcpy(GlobalLock(wdev->win32_hdevnames), GlobalLock(hdevnames), devnames_len);
GlobalUnlock(wdev->win32_hdevnames);
GlobalUnlock(hdevnames);
}
}
}
/* Modeless dialog box - Cancel printing */
BOOL CALLBACK
CancelDlgProc(HWND hDlg, UINT message, WPARAM wParam, LPARAM lParam)
{
switch (message) {
case WM_INITDIALOG:
SetWindowText(hDlg, szAppName);
return TRUE;
case WM_COMMAND:
switch (LOWORD(wParam)) {
case IDCANCEL:
DestroyWindow(hDlg);
EndDialog(hDlg, 0);
return TRUE;
}
}
return FALSE;
}
BOOL CALLBACK
AbortProc2(HDC hdcPrn, int code)
{
process_interrupts(NULL);
if (code == SP_OUTOFDISK)
return (FALSE); /* cancel job */
return (TRUE);
}