ref: 985b2457cda207c2c65edeb647aedbb6e92dac46
dir: /sys/src/cmd/gs/src/gxclpath.c/
/* Copyright (C) 1995, 2000 Aladdin Enterprises. All rights reserved.
This software is provided AS-IS with no warranty, either express or
implied.
This software is distributed under license and may not be copied,
modified or distributed except as expressly authorized under the terms
of the license contained in the file LICENSE in this distribution.
For more information about licensing, please refer to
http://www.ghostscript.com/licensing/. For information on
commercial licensing, go to http://www.artifex.com/licensing/ or
contact Artifex Software, Inc., 101 Lucas Valley Road #110,
San Rafael, CA 94903, U.S.A., +1(415)492-9861.
*/
/*$Id: gxclpath.c,v 1.21 2005/10/10 18:58:18 leonardo Exp $ */
/* Higher-level path operations for band lists */
#include "math_.h"
#include "memory_.h"
#include "gx.h"
#include "gpcheck.h"
#include "gserrors.h"
#include "gxdevice.h"
#include "gxdevmem.h" /* must precede gxcldev.h */
#include "gxcldev.h"
#include "gxclpath.h"
#include "gxcolor2.h"
#include "gxdcolor.h"
#include "gxpaint.h" /* for gx_fill/stroke_params */
#include "gzpath.h"
#include "gzcpath.h"
#include "stream.h"
#include "gsserial.h"
/* Statistics */
#ifdef DEBUG
ulong stats_cmd_diffs[5];
#endif
/* Forward declarations */
private int cmd_put_path(gx_device_clist_writer * cldev,
gx_clist_state * pcls, const gx_path * ppath,
fixed ymin, fixed ymax, byte op,
bool implicit_close, segment_notes keep_notes);
/* ------ Utilities ------ */
/* Compute the colors used by a colored halftone. */
private gx_color_index
colored_halftone_colors_used(gx_device_clist_writer *cldev,
const gx_drawing_color *pdcolor)
{
/*
* We only know how to compute an accurate color set for the
* standard CMYK color mapping function.
*/
if (dev_proc(cldev, map_cmyk_color) != cmyk_1bit_map_cmyk_color)
return ((gx_color_index)1 << cldev->color_info.depth) - 1;
/*
* Note that c_base[0], and the low-order bit of plane_mask,
* correspond to cyan: this requires reversing the bit order of
* the plane mask.
*/
return
((pdcolor->colors.colored.c_base[0] << 3) |
(pdcolor->colors.colored.c_base[1] << 2) |
(pdcolor->colors.colored.c_base[2] << 1) |
(pdcolor->colors.colored.c_base[3]) |
(byte_reverse_bits[pdcolor->colors.colored.plane_mask] >> 4));
}
/*
* Compute whether a drawing operation will require the slow (full-pixel)
* RasterOp implementation. If pdcolor is not NULL, it is the texture for
* the RasterOp.
*/
bool
cmd_slow_rop(gx_device *dev, gs_logical_operation_t lop,
const gx_drawing_color *pdcolor)
{
gs_rop3_t rop = lop_rop(lop);
if (pdcolor != 0 && gx_dc_is_pure(pdcolor)) {
gx_color_index color = gx_dc_pure_color(pdcolor);
if (color == gx_device_black(dev))
rop = rop3_know_T_0(rop);
else if (color == gx_device_white(dev))
rop = rop3_know_T_1(rop);
}
return !(rop == rop3_0 || rop == rop3_1 ||
rop == rop3_D || rop == rop3_S || rop == rop3_T);
}
/* Write out the color for filling, stroking, or masking. */
/* We should be able to share this with clist_tile_rectangle, */
/* but I don't see how to do it without adding a level of procedure. */
int
cmd_put_drawing_color(gx_device_clist_writer * cldev, gx_clist_state * pcls,
const gx_drawing_color * pdcolor)
{
const gx_device_halftone * pdht = pdcolor->type->get_dev_halftone(pdcolor);
int code, di;
uint dc_size = 0, req_size;
gx_device_color_saved * psdc = &pcls->sdc;
byte * dp;
byte * dp0;
gs_int_point color_phase;
/* see if the halftone must be inserted in the command list */
if ( pdht != NULL &&
pdht->id != cldev->device_halftone_id ) {
if ((code = cmd_put_halftone(cldev, pdht)) < 0)
return code;
color_unset(psdc);
}
/* see if phase informaiton must be inserted in the command list */
if ( pdcolor->type->get_phase(pdcolor, &color_phase) &&
(color_phase.x != pcls->tile_phase.x ||
color_phase.y != pcls->tile_phase.y ) &&
(code = cmd_set_tile_phase( cldev,
pcls,
color_phase.x,
color_phase.y )) < 0 )
return code;
/*
* Get the device color type index and the required size.
*
* The complete cmd_opv_ext_put_drawing_color consists of:
* comand code (2 bytes)
* device color type index (1)
* length of serialized device color (enc_u_sizew(dc_size))
* the serialized device color itself (dc_size)
*/
di = gx_get_dc_type_index(pdcolor);
code = pdcolor->type->write( pdcolor,
psdc,
(gx_device *)cldev,
0,
&dc_size );
/* if the returned value is > 0, no change in the color is necessary */
if (code > 0)
return 0;
else if (code < 0 && code != gs_error_rangecheck)
return code;
req_size = dc_size + 2 + 1 + enc_u_sizew(dc_size);
/*
* Encoded device colors are small in comparison to the command
* buffer size (< 64 bytes), so we can just clear space in the
* command buffer for them.
*/
if ((code = set_cmd_put_op(dp, cldev, pcls, cmd_opv_extend, req_size)) < 0)
return code;
dp0 = dp;
dp[1] = cmd_opv_ext_put_drawing_color;
dp += 2;
*dp++ = di;
enc_u_putw(dc_size, dp);
code = pdcolor->type->write( pdcolor,
&pcls->sdc,
(gx_device *)cldev,
dp,
&dc_size );
if (code < 0) {
cldev->cnext = dp0;
return code;
}
/* should properly calculate colors_used, but for now just punt */
pcls->colors_used.or = ((gx_color_index)1 << cldev->color_info.depth) - 1;
/* record the color we have just serialized color */
pdcolor->type->save_dc(pdcolor, &pcls->sdc);
return code;
}
/* Compute the colors used by a drawing color. */
gx_color_index
cmd_drawing_colors_used(gx_device_clist_writer *cldev,
const gx_drawing_color * pdcolor)
{
if (gx_dc_is_pure(pdcolor))
return gx_dc_pure_color(pdcolor);
else if (gx_dc_is_binary_halftone(pdcolor))
return gx_dc_binary_color0(pdcolor) | gx_dc_binary_color1(pdcolor);
else if (gx_dc_is_colored_halftone(pdcolor))
return colored_halftone_colors_used(cldev, pdcolor);
else
return ((gx_color_index)1 << cldev->color_info.depth) - 1;
}
/* Clear (a) specific 'known' flag(s) for all bands. */
/* We must do this whenever the value of a 'known' parameter changes. */
void
cmd_clear_known(gx_device_clist_writer * cldev, uint known)
{
uint unknown = ~known;
gx_clist_state *pcls = cldev->states;
int i;
for (i = cldev->nbands; --i >= 0; ++pcls)
pcls->known &= unknown;
}
/* Check whether we need to change the clipping path in the device. */
bool
cmd_check_clip_path(gx_device_clist_writer * cldev, const gx_clip_path * pcpath)
{
if (pcpath == NULL)
return false;
/* The clip path might have moved in memory, so even if the */
/* ids match, update the pointer. */
cldev->clip_path = pcpath;
if (pcpath->id == cldev->clip_path_id)
return false;
cldev->clip_path_id = pcpath->id;
return true;
}
/*
* Check the graphics state elements that need to be up to date for filling
* or stroking.
*/
#define FILL_KNOWN\
(cj_ac_sa_known | flatness_known | op_bm_tk_known | opacity_alpha_known |\
shape_alpha_known | fill_adjust_known | alpha_known | clip_path_known)
private void
cmd_check_fill_known(gx_device_clist_writer *cdev, const gs_imager_state *pis,
floatp flatness, const gs_fixed_point *padjust,
const gx_clip_path *pcpath, uint *punknown)
{
/*
* stroke_adjust is not needed for fills, and none of these are needed
* if the path has no curves, but it's easier to update them all.
*/
if (state_neq(line_params.curve_join) || state_neq(accurate_curves) ||
state_neq(stroke_adjust)
) {
*punknown |= cj_ac_sa_known;
state_update(line_params.curve_join);
state_update(accurate_curves);
state_update(stroke_adjust);
}
if (cdev->imager_state.flatness != flatness) {
*punknown |= flatness_known;
cdev->imager_state.flatness = flatness;
}
/*
* Note: overprint and overprint_mode are implemented via a compositor
* device, which is passed separately through the command list. Hence,
* though both parameters are passed in the state as well, this usually
* has no effect.
*/
if (state_neq(overprint) || state_neq(overprint_mode) ||
state_neq(blend_mode) || state_neq(text_knockout)
) {
*punknown |= op_bm_tk_known;
state_update(overprint);
state_update(overprint_mode);
state_update(blend_mode);
state_update(text_knockout);
}
if (state_neq(opacity.alpha)) {
*punknown |= opacity_alpha_known;
state_update(opacity.alpha);
}
if (state_neq(shape.alpha)) {
*punknown |= shape_alpha_known;
state_update(shape.alpha);
}
if (cdev->imager_state.fill_adjust.x != padjust->x ||
cdev->imager_state.fill_adjust.y != padjust->y
) {
*punknown |= fill_adjust_known;
cdev->imager_state.fill_adjust = *padjust;
}
if (cdev->imager_state.alpha != pis->alpha) {
*punknown |= alpha_known;
state_update(alpha);
}
if (cmd_check_clip_path(cdev, pcpath))
*punknown |= clip_path_known;
}
/* Compute the written CTM length. */
int
cmd_write_ctm_return_length(gx_device_clist_writer * cldev, const gs_matrix *m)
{
stream s;
s_init(&s, cldev->memory);
swrite_position_only(&s);
sput_matrix(&s, m);
return (uint)stell(&s);
}
/* Write out CTM. */
int
cmd_write_ctm(const gs_matrix *m, byte *dp, int len)
{
stream s;
swrite_string(&s, dp + 1, len);
sput_matrix(&s, m);
return 0;
}
/* Write out values of any unknown parameters. */
int
cmd_write_unknown(gx_device_clist_writer * cldev, gx_clist_state * pcls,
uint must_know)
{
uint unknown = ~pcls->known & must_know;
uint misc2_unknown = unknown & misc2_all_known;
byte *dp;
int code;
if (misc2_unknown) {
byte buf[
1 + /* cap_join */
1 + /* cj_ac_sa */
sizeof(float) + /* flatness */
sizeof(float) + /* line width */
sizeof(float) + /* miter limit */
1 + /* op_bm_tk */
sizeof(float) * 2 + /* opacity/shape alpha */
sizeof(cldev->imager_state.alpha)
];
byte *bp = buf;
if (unknown & cap_join_known) {
*bp++ = (cldev->imager_state.line_params.cap << 3) +
cldev->imager_state.line_params.join;
}
if (unknown & cj_ac_sa_known) {
*bp++ =
((cldev->imager_state.line_params.curve_join + 1) << 2) +
(cldev->imager_state.accurate_curves ? 2 : 0) +
(cldev->imager_state.stroke_adjust ? 1 : 0);
}
if (unknown & flatness_known) {
memcpy(bp, &cldev->imager_state.flatness, sizeof(float));
bp += sizeof(float);
}
if (unknown & line_width_known) {
float width =
gx_current_line_width(&cldev->imager_state.line_params);
memcpy(bp, &width, sizeof(width));
bp += sizeof(width);
}
if (unknown & miter_limit_known) {
memcpy(bp, &cldev->imager_state.line_params.miter_limit,
sizeof(float));
bp += sizeof(float);
}
if (unknown & op_bm_tk_known) {
*bp++ =
((int)cldev->imager_state.blend_mode << 3) +
(cldev->imager_state.text_knockout << 2) +
(cldev->imager_state.overprint_mode << 1) +
cldev->imager_state.overprint;
}
if (unknown & opacity_alpha_known) {
memcpy(bp, &cldev->imager_state.opacity.alpha, sizeof(float));
bp += sizeof(float);
}
if (unknown & shape_alpha_known) {
memcpy(bp, &cldev->imager_state.shape.alpha, sizeof(float));
bp += sizeof(float);
}
if (unknown & alpha_known) {
memcpy(bp, &cldev->imager_state.alpha,
sizeof(cldev->imager_state.alpha));
bp += sizeof(cldev->imager_state.alpha);
}
code = set_cmd_put_op(dp, cldev, pcls, cmd_opv_set_misc2,
1 + cmd_sizew(misc2_unknown) + bp - buf);
if (code < 0)
return 0;
memcpy(cmd_put_w(misc2_unknown, dp + 1), buf, bp - buf);
pcls->known |= misc2_unknown;
}
if (unknown & fill_adjust_known) {
code = set_cmd_put_op(dp, cldev, pcls, cmd_opv_set_fill_adjust,
1 + sizeof(fixed) * 2);
if (code < 0)
return code;
memcpy(dp + 1, &cldev->imager_state.fill_adjust.x, sizeof(fixed));
memcpy(dp + 1 + sizeof(fixed), &cldev->imager_state.fill_adjust.y, sizeof(fixed));
pcls->known |= fill_adjust_known;
}
if (unknown & ctm_known) {
int len = cmd_write_ctm_return_length(cldev, &ctm_only(&cldev->imager_state));
code = set_cmd_put_op(dp, cldev, pcls, cmd_opv_set_ctm, len + 1);
if (code < 0)
return code;
code = cmd_write_ctm(&ctm_only(&cldev->imager_state), dp, len);
if (code < 0)
return code;
pcls->known |= ctm_known;
}
if (unknown & dash_known) {
int n = cldev->imager_state.line_params.dash.pattern_size;
code = set_cmd_put_op(dp, cldev, pcls, cmd_opv_set_dash,
2 + (n + 2) * sizeof(float));
if (code < 0)
return code;
dp[1] = n + (cldev->imager_state.line_params.dash.adapt ? 0x80 : 0) +
(cldev->imager_state.line_params.dot_length_absolute ? 0x40 : 0);
memcpy(dp + 2, &cldev->imager_state.line_params.dot_length,
sizeof(float));
memcpy(dp + 2 + sizeof(float),
&cldev->imager_state.line_params.dash.offset,
sizeof(float));
if (n != 0)
memcpy(dp + 2 + sizeof(float) * 2,
cldev->dash_pattern, n * sizeof(float));
pcls->known |= dash_known;
}
if (unknown & clip_path_known) {
/*
* We can write out the clipping path either as rectangles
* or as a real (filled) path.
*/
const gx_clip_path *pcpath = cldev->clip_path;
int band_height = cldev->page_band_height;
int ymin = (pcls - cldev->states) * band_height;
int ymax = min(ymin + band_height, cldev->height);
gs_fixed_rect box;
bool punt_to_outer_box = false;
int code;
code = set_cmd_put_op(dp, cldev, pcls, cmd_opv_begin_clip, 1);
if (code < 0)
return code;
if (pcpath->path_valid) {
if (gx_path_is_rectangle(&pcpath->path, &box) &&
fixed_is_int(box.p.x | box.p.y | box.q.x | box.q.y)
) {
/* Write the path as a rectangle. */
code = cmd_write_rect_cmd(cldev, pcls, cmd_op_fill_rect,
fixed2int_var(box.p.x),
fixed2int_var(box.p.y),
fixed2int(box.q.x - box.p.x),
fixed2int(box.q.y - box.p.y));
} else if ( !(cldev->disable_mask & clist_disable_complex_clip) ) {
/* Write the path. */
code = cmd_put_path(cldev, pcls, &pcpath->path,
int2fixed(ymin - 1),
int2fixed(ymax + 1),
(byte)(pcpath->rule == gx_rule_even_odd ?
cmd_opv_eofill : cmd_opv_fill),
true, sn_not_first);
} else {
/* Complex paths disabled: write outer box as clip */
punt_to_outer_box = true;
}
} else { /* Write out the rectangles. */
const gx_clip_list *list = gx_cpath_list(pcpath);
const gx_clip_rect *prect = list->head;
if (prect == 0)
prect = &list->single;
else if (cldev->disable_mask & clist_disable_complex_clip)
punt_to_outer_box = true;
if (!punt_to_outer_box) {
for (; prect != 0 && code >= 0; prect = prect->next)
if (prect->xmax > prect->xmin &&
prect->ymin < ymax && prect->ymax > ymin
) {
code =
cmd_write_rect_cmd(cldev, pcls, cmd_op_fill_rect,
prect->xmin, prect->ymin,
prect->xmax - prect->xmin,
prect->ymax - prect->ymin);
}
}
}
if (punt_to_outer_box) {
/* Clip is complex, but disabled. Write out the outer box */
gs_fixed_rect box;
gx_cpath_outer_box(pcpath, &box);
box.p.x = fixed_floor(box.p.x);
box.p.y = fixed_floor(box.p.y);
code = cmd_write_rect_cmd(cldev, pcls, cmd_op_fill_rect,
fixed2int_var(box.p.x),
fixed2int_var(box.p.y),
fixed2int_ceiling(box.q.x - box.p.x),
fixed2int_ceiling(box.q.y - box.p.y));
}
{
int end_code =
set_cmd_put_op(dp, cldev, pcls, cmd_opv_end_clip, 1);
if (code >= 0)
code = end_code; /* take the first failure seen */
if (end_code < 0 && cldev->error_is_retryable) {
/*
* end_clip has to work despite lo-mem to maintain consistency.
* This isn't error recovery, but just to prevent dangling
* cmd_opv_begin_clip's.
*/
++cldev->ignore_lo_mem_warnings;
end_code =
set_cmd_put_op(dp, cldev, pcls, cmd_opv_end_clip, 1);
--cldev->ignore_lo_mem_warnings;
}
}
if (code < 0)
return code;
pcls->clip_enabled = 1;
pcls->known |= clip_path_known;
}
if (unknown & color_space_known) {
byte *dp;
if (cldev->color_space.byte1 & 8) { /* indexed */
const gs_color_space *pcs = cldev->color_space.space;
int hival = pcs->params.indexed.hival;
uint num_values = (hival + 1) *
gs_color_space_num_components(
(const gs_color_space *)&pcs->params.indexed.base_space);
bool use_proc = cldev->color_space.byte1 & 4;
const void *map_data;
uint map_size;
if (use_proc) {
map_data = pcs->params.indexed.lookup.map->values;
map_size = num_values *
sizeof(pcs->params.indexed.lookup.map->values[0]);
} else {
map_data = pcs->params.indexed.lookup.table.data;
map_size = num_values;
}
code = set_cmd_put_op(dp, cldev, pcls, cmd_opv_set_color_space,
2 + cmd_sizew(hival) + map_size);
if (code < 0)
return code;
memcpy(cmd_put_w(hival, dp + 2), map_data, map_size);
} else {
code = set_cmd_put_op(dp, cldev, pcls, cmd_opv_set_color_space, 2);
if (code < 0)
return code;
}
dp[1] = cldev->color_space.byte1;
pcls->known |= color_space_known;
}
/****** HANDLE masks ******/
return 0;
}
/* ------ Driver procedures ------ */
int
clist_fill_path(gx_device * dev, const gs_imager_state * pis, gx_path * ppath,
const gx_fill_params * params, const gx_drawing_color * pdcolor,
const gx_clip_path * pcpath)
{
gx_device_clist_writer * const cdev =
&((gx_device_clist *)dev)->writer;
uint unknown = 0;
int y, height, y0, y1;
gs_logical_operation_t lop = pis->log_op;
byte op = (byte)
(params->rule == gx_rule_even_odd ?
cmd_opv_eofill : cmd_opv_fill);
gs_fixed_point adjust;
bool slow_rop = cmd_slow_rop(dev, lop_know_S_0(lop), pdcolor);
if ( (cdev->disable_mask & clist_disable_fill_path) ||
gs_debug_c(',')
) {
/* Disable path-based banding. */
return gx_default_fill_path(dev, pis, ppath, params, pdcolor,
pcpath);
}
adjust = params->adjust;
{
gs_fixed_rect bbox;
gx_path_bbox(ppath, &bbox);
y = fixed2int(bbox.p.y) - 1;
height = fixed2int_ceiling(bbox.q.y) - y + 1;
fit_fill_y(dev, y, height);
fit_fill_h(dev, y, height);
if (height <= 0)
return 0;
}
y0 = y;
y1 = y + height;
cmd_check_fill_known(cdev, pis, params->flatness, &adjust, pcpath,
&unknown);
if (unknown)
cmd_clear_known(cdev, unknown);
FOR_RECTS_NO_ERROR {
int code = cmd_do_write_unknown(cdev, pcls, FILL_KNOWN);
if (code < 0)
return code;
if ((code = cmd_do_enable_clip(cdev, pcls, pcpath != NULL)) < 0 ||
(code = cmd_update_lop(cdev, pcls, lop)) < 0
)
return code;
code = cmd_put_drawing_color(cdev, pcls, pdcolor);
if (code < 0) {
/* Something went wrong, use the default implementation. */
return gx_default_fill_path(dev, pis, ppath, params, pdcolor,
pcpath);
}
pcls->colors_used.slow_rop |= slow_rop;
code = cmd_put_path(cdev, pcls, ppath,
int2fixed(max(y - 1, y0)),
int2fixed(min(y + height + 1, y1)),
op,
true, sn_none /* fill doesn't need the notes */ );
if (code < 0)
return code;
} END_RECTS_NO_ERROR;
return 0;
}
int
clist_stroke_path(gx_device * dev, const gs_imager_state * pis, gx_path * ppath,
const gx_stroke_params * params,
const gx_drawing_color * pdcolor, const gx_clip_path * pcpath)
{
gx_device_clist_writer * const cdev =
&((gx_device_clist *)dev)->writer;
int pattern_size = pis->line_params.dash.pattern_size;
uint unknown = 0;
gs_fixed_rect bbox;
gs_fixed_point expansion;
int adjust_y, expansion_code;
int y, height;
gs_logical_operation_t lop = pis->log_op;
bool slow_rop = cmd_slow_rop(dev, lop_know_S_0(lop), pdcolor);
if ((cdev->disable_mask & clist_disable_stroke_path) ||
gs_debug_c(',')
) {
/* Disable path-based banding. */
return gx_default_stroke_path(dev, pis, ppath, params, pdcolor,
pcpath);
}
gx_path_bbox(ppath, &bbox);
/* We must use the supplied imager state, not our saved one, */
/* for computing the stroke expansion. */
expansion_code = gx_stroke_path_expansion(pis, ppath, &expansion);
if (expansion_code < 0) {
/* Expansion is too large: use the entire page. */
adjust_y = 0;
y = 0;
height = dev->height;
} else {
adjust_y = fixed2int_ceiling(expansion.y) + 1;
y = fixed2int(bbox.p.y) - adjust_y;
height = fixed2int_ceiling(bbox.q.y) - y + adjust_y;
fit_fill_y(dev, y, height);
fit_fill_h(dev, y, height);
if (height <= 0)
return 0;
}
/* Check the dash pattern, since we bail out if */
/* the pattern is too large. */
if (cdev->imager_state.line_params.dash.pattern_size != pattern_size ||
(pattern_size != 0 &&
memcmp(cdev->dash_pattern, pis->line_params.dash.pattern,
pattern_size * sizeof(float))) ||
cdev->imager_state.line_params.dash.offset !=
pis->line_params.dash.offset ||
cdev->imager_state.line_params.dash.adapt !=
pis->line_params.dash.adapt ||
cdev->imager_state.line_params.dot_length !=
pis->line_params.dot_length ||
cdev->imager_state.line_params.dot_length_absolute !=
pis->line_params.dot_length_absolute
) {
/* Bail out if the dash pattern is too long. */
if (pattern_size > cmd_max_dash)
return gx_default_stroke_path(dev, pis, ppath, params,
pdcolor, pcpath);
unknown |= dash_known;
/*
* Temporarily reset the dash pattern pointer for gx_set_dash,
* but don't leave it set, since that would confuse the GC.
*/
cdev->imager_state.line_params.dash.pattern = cdev->dash_pattern;
gx_set_dash(&cdev->imager_state.line_params.dash,
pis->line_params.dash.pattern,
pis->line_params.dash.pattern_size,
pis->line_params.dash.offset, NULL);
cdev->imager_state.line_params.dash.pattern = 0;
gx_set_dash_adapt(&cdev->imager_state.line_params.dash,
pis->line_params.dash.adapt);
gx_set_dot_length(&cdev->imager_state.line_params,
pis->line_params.dot_length,
pis->line_params.dot_length_absolute);
}
if (state_neq(line_params.cap) || state_neq(line_params.join)) {
unknown |= cap_join_known;
state_update(line_params.cap);
state_update(line_params.join);
}
cmd_check_fill_known(cdev, pis, params->flatness, &pis->fill_adjust,
pcpath, &unknown);
if (state_neq(line_params.half_width)) {
unknown |= line_width_known;
state_update(line_params.half_width);
}
if (state_neq(line_params.miter_limit)) {
unknown |= miter_limit_known;
gx_set_miter_limit(&cdev->imager_state.line_params,
pis->line_params.miter_limit);
}
if (state_neq(ctm.xx) || state_neq(ctm.xy) ||
state_neq(ctm.yx) || state_neq(ctm.yy) ||
/* We don't actually need tx or ty, but we don't want to bother */
/* tracking them separately from the other coefficients. */
state_neq(ctm.tx) || state_neq(ctm.ty)
) {
unknown |= ctm_known;
state_update(ctm);
}
if (unknown)
cmd_clear_known(cdev, unknown);
FOR_RECTS_NO_ERROR {
int code;
if ((code = cmd_do_write_unknown(cdev, pcls, stroke_all_known)) < 0 ||
(code = cmd_do_enable_clip(cdev, pcls, pcpath != NULL)) < 0 ||
(code = cmd_update_lop(cdev, pcls, lop)) < 0
)
return code;
code = cmd_put_drawing_color(cdev, pcls, pdcolor);
if (code < 0) {
/* Something went wrong, use the default implementation. */
return gx_default_stroke_path(dev, pis, ppath, params, pdcolor,
pcpath);
}
pcls->colors_used.slow_rop |= slow_rop;
{
fixed ymin, ymax;
/*
* If a dash pattern is active, we can't skip segments
* outside the clipping region, because that would throw off
* the pattern.
* Don't skip segments when expansion is unknown.
*/
if (pattern_size || expansion_code < 0 ) {
ymin = min_fixed;
ymax = max_fixed;
} else {
ymin = int2fixed(y - adjust_y);
ymax = int2fixed(y + height + adjust_y);
}
code = cmd_put_path(cdev, pcls, ppath, ymin, ymax,
cmd_opv_stroke,
false, (segment_notes)~0);
if (code < 0)
return code;
}
} END_RECTS_NO_ERROR;
return 0;
}
/*
* Fill_parallelogram and fill_triangle aren't very efficient. This isn't
* important right now, since the non-degenerate case is only used for
* smooth shading. However, the rectangular case of fill_parallelogram is
* sometimes used for images, so its performance does matter.
*/
private int
clist_put_polyfill(gx_device *dev, fixed px, fixed py,
const gs_fixed_point *points, int num_points,
const gx_drawing_color *pdcolor, gs_logical_operation_t lop)
{
gx_path path;
gs_memory_t *mem = dev->memory;
int code;
gx_device_clist_writer * const cdev =
&((gx_device_clist *)dev)->writer;
gs_fixed_rect bbox;
int y, height, y0, y1;
bool slow_rop = cmd_slow_rop(dev, lop_know_S_0(lop), pdcolor);
if (gs_debug_c(','))
return -1; /* path-based banding is disabled */
gx_path_init_local(&path, mem);
if ((code = gx_path_add_point(&path, px, py)) < 0 ||
(code = gx_path_add_lines(&path, points, num_points)) < 0
)
goto out;
gx_path_bbox(&path, &bbox);
y = fixed2int(bbox.p.y) - 1;
height = fixed2int_ceiling(bbox.q.y) - y + 1;
fit_fill_y(dev, y, height);
fit_fill_h(dev, y, height);
if (height <= 0)
return 0;
y0 = y;
y1 = y + height;
FOR_RECTS_NO_ERROR {
if ((code = cmd_update_lop(cdev, pcls, lop)) < 0 ||
(code = cmd_put_drawing_color(cdev, pcls, pdcolor)) < 0)
goto out;
pcls->colors_used.slow_rop |= slow_rop;
code = cmd_put_path(cdev, pcls, &path,
int2fixed(max(y - 1, y0)),
int2fixed(min(y + height + 1, y1)),
cmd_opv_polyfill,
true, sn_none /* fill doesn't need the notes */ );
if (code < 0)
goto out;
} END_RECTS_NO_ERROR;
out:
gx_path_free(&path, "clist_put_polyfill");
return code;
}
int
clist_fill_parallelogram(gx_device *dev, fixed px, fixed py,
fixed ax, fixed ay, fixed bx, fixed by,
const gx_drawing_color *pdcolor,
gs_logical_operation_t lop)
{
gs_fixed_point pts[3];
int code;
if (PARALLELOGRAM_IS_RECT(ax, ay, bx, by)) {
gs_int_rect r;
INT_RECT_FROM_PARALLELOGRAM(&r, px, py, ax, ay, bx, by);
return gx_fill_rectangle_device_rop(r.p.x, r.p.y, r.q.x - r.p.x,
r.q.y - r.p.y, pdcolor, dev, lop);
}
pts[0].x = px + ax, pts[0].y = py + ay;
pts[1].x = pts[0].x + bx, pts[1].y = pts[0].y + by;
pts[2].x = px + bx, pts[2].y = py + by;
code = clist_put_polyfill(dev, px, py, pts, 3, pdcolor, lop);
return (code >= 0 ? code :
gx_default_fill_parallelogram(dev, px, py, ax, ay, bx, by,
pdcolor, lop));
}
int
clist_fill_triangle(gx_device *dev, fixed px, fixed py,
fixed ax, fixed ay, fixed bx, fixed by,
const gx_drawing_color *pdcolor,
gs_logical_operation_t lop)
{
gs_fixed_point pts[2];
int code;
pts[0].x = px + ax, pts[0].y = py + ay;
pts[1].x = px + bx, pts[1].y = py + by;
code = clist_put_polyfill(dev, px, py, pts, 2, pdcolor, lop);
return (code >= 0 ? code :
gx_default_fill_triangle(dev, px, py, ax, ay, bx, by,
pdcolor, lop));
}
/* ------ Path utilities ------ */
/* Define the state bookkeeping for writing path segments. */
typedef struct cmd_segment_writer_s {
/* Set at initialization */
gx_device_clist_writer *cldev;
gx_clist_state *pcls;
/* Updated dynamically */
segment_notes notes;
byte *dp;
int len;
gs_fixed_point delta_first;
byte cmd[6 * (1 + sizeof(fixed))];
}
cmd_segment_writer;
/* Put out a path segment command. */
private int
cmd_put_segment(cmd_segment_writer * psw, byte op,
const fixed * operands, segment_notes notes)
{
const fixed *optr = operands;
/* Fetch num_operands before possible command merging. */
static const byte op_num_operands[] = {
cmd_segment_op_num_operands_values
};
int i = op_num_operands[op & 0xf];
/* One picky compiler complains if we initialize to psw->cmd - 1. */
byte *q = psw->cmd;
--q;
#ifdef DEBUG
if (gs_debug_c('L')) {
int j;
dlprintf2("[L] %s:%d:", cmd_sub_op_names[op >> 4][op & 0xf],
(int)notes);
for (j = 0; j < i; ++j)
dprintf1(" %g", fixed2float(operands[j]));
dputs("\n");
}
#endif
/* Merge or shorten commands if possible. */
if (op == cmd_opv_rlineto) {
if (operands[0] == 0)
op = cmd_opv_vlineto, optr = ++operands, i = 1;
else if (operands[1] == 0)
op = cmd_opv_hlineto, i = 1;
else
switch (*psw->dp) {
case cmd_opv_rmoveto:
psw->delta_first.x = operands[0];
psw->delta_first.y = operands[1];
op = cmd_opv_rmlineto;
merge:cmd_uncount_op(*psw->dp, psw->len);
cmd_shorten_op(psw->cldev, psw->pcls, psw->len); /* delete it */
q += psw->len - 1;
break;
case cmd_opv_rmlineto:
if (notes != psw->notes)
break;
op = cmd_opv_rm2lineto;
goto merge;
case cmd_opv_rm2lineto:
if (notes != psw->notes)
break;
if (operands[0] == -psw->delta_first.x &&
operands[1] == -psw->delta_first.y
) {
cmd_uncount_op(cmd_opv_rm2lineto, psw->len);
*psw->dp = cmd_count_op(cmd_opv_rm3lineto, psw->len);
return 0;
}
break;
default:
;
}
}
for (; --i >= 0; ++optr) {
fixed d = *optr, d2;
if (is_bits(d, _fixed_shift + 11) &&
!(d & (float2fixed(0.25) - 1))
) {
cmd_count_add1(stats_cmd_diffs[3]);
d = ((d >> (_fixed_shift - 2)) & 0x1fff) + 0xc000;
q += 2;
} else if (is_bits(d, 19) && i > 0 && is_bits(d2 = optr[1], 19)) {
cmd_count_add1(stats_cmd_diffs[0]);
q[1] = (byte) ((d >> 13) & 0x3f);
q[2] = (byte) (d >> 5);
q[3] = (byte) ((d << 3) + ((d2 >> 16) & 7));
q[4] = (byte) (d2 >> 8);
q[5] = (byte) d2;
q += 5;
--i, ++optr;
continue;
} else if (is_bits(d, 22)) {
cmd_count_add1(stats_cmd_diffs[1]);
q[1] = (byte) (((d >> 16) & 0x3f) + 0x40);
q += 3;
} else if (is_bits(d, 30)) {
cmd_count_add1(stats_cmd_diffs[2]);
q[1] = (byte) (((d >> 24) & 0x3f) + 0x80);
q[2] = (byte) (d >> 16);
q += 4;
} else {
int b;
cmd_count_add1(stats_cmd_diffs[4]);
*++q = 0xe0;
for (b = sizeof(fixed) - 1; b > 1; --b)
*++q = (byte) (d >> (b * 8));
q += 2;
}
q[-1] = (byte) (d >> 8);
*q = (byte) d;
}
if (notes != psw->notes) {
byte *dp;
int code =
set_cmd_put_op(dp, psw->cldev, psw->pcls, cmd_opv_set_misc2, 3);
if (code < 0)
return code;
dp[1] = segment_notes_known;
dp[2] = notes;
psw->notes = notes;
} {
int len = q + 2 - psw->cmd;
byte *dp;
int code = set_cmd_put_op(dp, psw->cldev, psw->pcls, op, len);
if (code < 0)
return code;
memcpy(dp + 1, psw->cmd, len - 1);
psw->len = len;
psw->dp = dp;
}
return 0;
}
/* Put out a line segment command. */
#define cmd_put_rmoveto(psw, operands)\
cmd_put_segment(psw, cmd_opv_rmoveto, operands, sn_none)
#define cmd_put_rlineto(psw, operands, notes)\
cmd_put_segment(psw, cmd_opv_rlineto, operands, notes)
/*
* Write a path. We go to a lot of trouble to omit segments that are
* entirely outside the band.
*/
private int
cmd_put_path(gx_device_clist_writer * cldev, gx_clist_state * pcls,
const gx_path * ppath, fixed ymin, fixed ymax, byte path_op,
bool implicit_close, segment_notes keep_notes)
{
gs_path_enum cenum;
cmd_segment_writer writer;
/*
* initial_op is logically const. We would like to declare it as
* static const, since some systems really dislike non-const statics,
* but this would entail a cast in set_first_point() that provokes a
* warning message from gcc. Instead, we pay the (tiny) cost of an
* unnecessary dynamic initialization.
*/
byte initial_op = cmd_opv_end_run;
/*
* We define the 'side' of a point according to its Y value as
* follows:
*/
#define which_side(y) ((y) < ymin ? -1 : (y) >= ymax ? 1 : 0)
/*
* While writing a subpath, we need to keep track of any segments
* skipped at the beginning of the subpath and any segments skipped
* just before the current segment. We do this with two sets of
* state variables, one that tracks the actual path segments and one
* that tracks the emitted segments.
*
* The following track the actual segments:
*/
/*
* The point and side of the last moveto (skipped if
* start_side != 0):
*/
gs_fixed_point start;
int start_side = 0x7badf00d; /* Initialize against indeterminizm. */
/*
* Whether any lines or curves were skipped immediately
* following the moveto:
*/
bool start_skip = 0x7badf00d; /* Initialize against indeterminizm. */
/* The side of the last point: */
int side = 0x7badf00d; /* Initialize against indeterminizm. */
/* The last point with side != 0: */
gs_fixed_point out;
/* If the last out-going segment was a lineto, */
/* its notes: */
segment_notes out_notes = 0x7badf00d; /* Initialize against indeterminizm. */
/*
* The following track the emitted segments:
*/
/* The last point emitted: */
fixed px = int2fixed(pcls->rect.x);
fixed py = int2fixed(pcls->rect.y);
/* The point of the last emitted moveto: */
gs_fixed_point first;
/* Information about the last emitted operation: */
int open = 0; /* -1 if last was moveto, 1 if line/curveto, */
/* 0 if newpath/closepath */
if_debug4('p', "[p]initial (%g,%g), clip [%g..%g)\n",
fixed2float(px), fixed2float(py),
fixed2float(ymin), fixed2float(ymax));
gx_path_enum_init(&cenum, ppath);
writer.cldev = cldev;
writer.pcls = pcls;
writer.notes = sn_none;
#define set_first_point() (writer.dp = &initial_op)
#define first_point() (writer.dp == &initial_op)
set_first_point();
for (;;) {
fixed vs[6];
struct { fixed vs[6]; } prev;
#define A vs[0]
#define B vs[1]
#define C vs[2]
#define D vs[3]
#define E vs[4]
#define F vs[5]
int pe_op = gx_path_enum_next(&cenum, (gs_fixed_point *) vs);
byte *dp;
int code;
switch (pe_op) {
case 0:
/* If the path is open and needs an implicit close, */
/* do the close and then come here again. */
if (open > 0 && implicit_close)
goto close;
/* All done. */
pcls->rect.x = fixed2int_var(px);
pcls->rect.y = fixed2int_var(py);
if_debug2('p', "[p]final (%d,%d)\n",
pcls->rect.x, pcls->rect.y);
return set_cmd_put_op(dp, cldev, pcls, path_op, 1);
case gs_pe_moveto:
/* If the path is open and needs an implicit close, */
/* do a closepath and then redo the moveto. */
if (open > 0 && implicit_close) {
gx_path_enum_backup(&cenum);
goto close;
}
open = -1;
start.x = A, start.y = B;
start_skip = false;
if ((start_side = side = which_side(B)) != 0) {
out.x = A, out.y = B;
if_debug3('p', "[p]skip moveto (%g,%g) side %d\n",
fixed2float(out.x), fixed2float(out.y),
side);
continue;
}
C = A - px, D = B - py;
first.x = px = A, first.y = py = B;
code = cmd_put_rmoveto(&writer, &C);
if_debug2('p', "[p]moveto (%g,%g)\n",
fixed2float(px), fixed2float(py));
break;
case gs_pe_lineto:
{
int next_side = which_side(B);
segment_notes notes =
gx_path_enum_notes(&cenum) & keep_notes;
if (next_side == side && side != 0) { /* Skip a line completely outside the clip region. */
if (open < 0)
start_skip = true;
out.x = A, out.y = B;
out_notes = notes;
if_debug3('p', "[p]skip lineto (%g,%g) side %d\n",
fixed2float(out.x), fixed2float(out.y),
side);
continue;
}
/* If we skipped any segments, put out a moveto/lineto. */
if (side && (px != out.x || py != out.y || first_point())) {
C = out.x - px, D = out.y - py;
if (open < 0) {
first = out;
code = cmd_put_rmoveto(&writer, &C);
} else
code = cmd_put_rlineto(&writer, &C, out_notes);
if (code < 0)
return code;
px = out.x, py = out.y;
if_debug3('p', "[p]catchup %s (%g,%g) for line\n",
(open < 0 ? "moveto" : "lineto"),
fixed2float(px), fixed2float(py));
}
if ((side = next_side) != 0) { /* Note a vertex going outside the clip region. */
out.x = A, out.y = B;
}
C = A - px, D = B - py;
px = A, py = B;
open = 1;
code = cmd_put_rlineto(&writer, &C, notes);
}
if_debug3('p', "[p]lineto (%g,%g) side %d\n",
fixed2float(px), fixed2float(py), side);
break;
case gs_pe_closepath:
#ifdef DEBUG
{
gs_path_enum cpenum;
gs_fixed_point cvs[3];
int op;
cpenum = cenum;
switch (op = gx_path_enum_next(&cpenum, cvs)) {
case 0:
case gs_pe_moveto:
break;
default:
lprintf1("closepath followed by %d, not end/moveto!\n",
op);
}
}
#endif
/* A closepath may require drawing an explicit line if */
/* we skipped any segments at the beginning of the path. */
close:if (side != start_side) { /* If we skipped any segments, put out a moveto/lineto. */
if (side && (px != out.x || py != out.y || first_point())) {
C = out.x - px, D = out.y - py;
code = cmd_put_rlineto(&writer, &C, out_notes);
if (code < 0)
return code;
px = out.x, py = out.y;
if_debug2('p', "[p]catchup line (%g,%g) for close\n",
fixed2float(px), fixed2float(py));
}
if (open > 0 && start_skip) { /* Draw the closing line back to the start. */
C = start.x - px, D = start.y - py;
code = cmd_put_rlineto(&writer, &C, sn_none);
if (code < 0)
return code;
px = start.x, py = start.y;
if_debug2('p', "[p]draw close to (%g,%g)\n",
fixed2float(px), fixed2float(py));
}
}
/*
* We don't bother to update side because we know that the
* next element after a closepath, if any, must be a moveto.
* We must handle explicitly the possibility that the entire
* subpath was skipped.
*/
if (implicit_close || open <= 0) {
/*
* Force writing an explicit moveto if the next subpath
* starts with a moveto to the same point where this one
* ends.
*/
set_first_point();
if (side != 0) {
open = 0;
continue;
}
}
open = 0;
px = first.x, py = first.y;
code = cmd_put_segment(&writer, cmd_opv_closepath, &A, sn_none);
if_debug0('p', "[p]close\n");
break;
case gs_pe_curveto:
{
segment_notes notes =
gx_path_enum_notes(&cenum) & keep_notes;
{
fixed bpy, bqy;
int all_side, out_side;
/* Compute the Y bounds for the clipping check. */
if (B < D)
bpy = B, bqy = D;
else
bpy = D, bqy = B;
if (F < bpy)
bpy = F;
else if (F > bqy)
bqy = F;
all_side = (bqy < ymin ? -1 : bpy > ymax ? 1 : 0);
if (all_side != 0) {
if (all_side == side) { /* Skip a curve entirely outside the clip region. */
if (open < 0)
start_skip = true;
out.x = E, out.y = F;
out_notes = notes;
if_debug3('p', "[p]skip curveto (%g,%g) side %d\n",
fixed2float(out.x), fixed2float(out.y),
side);
continue;
}
out_side = all_side;
} else
out_side = which_side(F);
/* If we skipped any segments, put out a moveto/lineto. */
if (side && (px != out.x || py != out.y || first_point())) {
fixed diff[2];
diff[0] = out.x - px, diff[1] = out.y - py;
if (open < 0) {
first = out;
code = cmd_put_rmoveto(&writer, diff);
} else
code = cmd_put_rlineto(&writer, diff, out_notes);
if (code < 0)
return code;
px = out.x, py = out.y;
if_debug3('p', "[p]catchup %s (%g,%g) for curve\n",
(open < 0 ? "moveto" : "lineto"),
fixed2float(px), fixed2float(py));
}
if ((side = out_side) != 0) { /* Note a vertex going outside the clip region. */
out.x = E, out.y = F;
}
}
{
fixed nx = E, ny = F;
const fixed *optr = vs;
byte op;
if_debug7('p', "[p]curveto (%g,%g; %g,%g; %g,%g) side %d\n",
fixed2float(A), fixed2float(B),
fixed2float(C), fixed2float(D),
fixed2float(E), fixed2float(F), side);
E -= C, F -= D;
C -= A, D -= B;
A -= px, B -= py;
if (*writer.dp >= cmd_opv_min_curveto &&
*writer.dp <= cmd_opv_max_curveto &&
((prev.A == 0 &&
A == prev.E && C == prev.C && E == prev.A &&
B == -prev.F && D == -prev.D && F == -prev.B) ||
(prev.A != 0 &&
A == -prev.E && C == -prev.C && E == -prev.A &&
B == prev.F && D == prev.D && F == prev.B))
)
op = cmd_opv_scurveto;
else if (B == 0 && E == 0) {
B = A, E = F, optr++, op = cmd_opv_hvcurveto;
if ((B ^ D) >= 0) {
if (C == D && E == B)
op = cmd_opv_hqcurveto;
} else if (C == -D && E == -B)
C = D, op = cmd_opv_hqcurveto;
} else if (A == 0 && F == 0) {
optr++, op = cmd_opv_vhcurveto;
if ((B ^ C) >= 0) {
if (D == C && E == B)
op = cmd_opv_vqcurveto;
} else if (D == -C && E == -B)
op = cmd_opv_vqcurveto;
} else if (A == 0 && B == 0)
optr += 2, op = cmd_opv_nrcurveto;
else if (E == 0 && F == 0)
op = cmd_opv_rncurveto;
else
op = cmd_opv_rrcurveto;
memcpy(prev.vs, vs, sizeof(prev.vs));
px = nx, py = ny;
open = 1;
code = cmd_put_segment(&writer, op, optr, notes);
}
}
break;
default:
return_error(gs_error_rangecheck);
}
if (code < 0)
return code;
#undef A
#undef B
#undef C
#undef D
#undef E
#undef F
}
}