ref: a6fde3edc5ec390d23e50110c93492d42f1e23e1
dir: /sys/lib/ghostscript/gs_dps.ps/
% Copyright (C) 1997, 2000 Aladdin Enterprises. All rights reserved. % % This software is provided AS-IS with no warranty, either express or % implied. % % This software is distributed under license and may not be copied, % modified or distributed except as expressly authorized under the terms % of the license contained in the file LICENSE in this distribution. % % For more information about licensing, please refer to % http://www.ghostscript.com/licensing/. For information on % commercial licensing, go to http://www.artifex.com/licensing/ or % contact Artifex Software, Inc., 101 Lucas Valley Road #110, % San Rafael, CA 94903, U.S.A., +1(415)492-9861. % $Id: gs_dps.ps,v 1.8 2002/11/14 17:24:00 raph Exp $ % Initialization file for Display PostScript functions. % ------ Contexts ------ % % To create a context with private local VM, we use the .localfork % operator to actually create the context, the new VM, and an empty % userdict, and then we call the .initlocaldicts procedure to make % local copies of the initial contents of the dictionaries in local VM. % savedlocaldicts in systemdict is a global read-only dictionary whose % elements are global read-only copies of these initial contents; % we just copy its elements into local VM and install them in systemdict. % userdict and internaldict require special handling. % Switching between contexts with different local VMs requires % changing the bindings in systemdict that reference local objects. % For this purpose, each userdict has an entry called localdicts % which holds the local copies of the elements of savedlocaldicts, % plus internaldict. The context switching code in the interpreter % effectively copies this dictionary into systemdict. % NOTE: the name localdicts is known to the interpreter. % Switching between contexts also requires resetting the user parameters. % The interpreter records the value of userparams (a local dictionary % referenced from systemdict) for each context, and uses it for this. % See gs_lev2.ps for more details. % NOTE: the name userparams is known to the interpreter. % Save copies of local dictionaries at the end of system initialization. % Also save the initial gstate. /.savelocalstate { .currentglobal true .setglobal //systemdict /savedlocaldicts mark //systemdict { dup gcheck { pop pop } { dup type /dicttype eq { % Save a copy of this dictionary in global VM. dup maxlength dict .copydict readonly } { pop pop } ifelse } ifelse } forall .dicttomark readonly put % Create localdicts for the current context. false .setglobal userdict /localdicts mark savedlocaldicts { pop dup load } forall /internaldict dup load .dicttomark readonly put % Save a copy of the initial gstate. true .setglobal //systemdict /savedinitialgstate gstate readonly put .setglobal } .bind def % Initialize local dictionaries and gstate when creating a new context. % Note that until this completes, we are in the anomalous situation of % having systemdict point to dictionaries that are in a non-current % local VM. Because of this, we turn off garbage collection temporarily. /.copylocal { % <name> <dict> .copylocal <name> <dict'> % Copy a dictionary to the current (local) VM, % and make it read-only if its current definition is. dup maxlength dict .copydict 1 index load wcheck not { readonly } if } .bind def % When this is called, the dictionary stack is in its initial state, % and there is (anomalously) only one gstate on the gstate stack. /.initlocaldicts { % - .initlocaldicts - -2 vmreclaim .currentglobal //systemdict begin false .setglobal % Since localdicts doesn't exist yet, references from % systemdict to local objects won't get restored if % a context switch happens in this code. Therefore, % until localdicts is defined, we have to keep all our % state on the operand stack. % Acquire userdict. %****** WRONG IF NON-STANDARD INITIAL DSTACK ****** countdictstack array dictstack { dup gcheck not { exit } if pop } forall % Create localdicts with a local copy of each dictionary, % except for userdict and userparams, which just need % to be filled in. mark savedlocaldicts { 1 index /userdict eq { % Stack: userdict mark ... /userdict inituserdict counttomark 1 add index .copydict } { 1 index /userparams eq { % Stack: userdict mark ... /userparams inituserparams userparams .copydict } { .copylocal } ifelse } ifelse } forall /internaldict dup .makeinternaldict .makeoperator .dicttomark readonly /localdicts exch put % localdicts is now defined in userdict. % Copy the definitions into systemdict. localdicts { .forcedef } forall % Set the user parameters. userparams readonly .setuserparams % Establish the initial gstate(s). /savedinitialgstate .systemvar setgstate gsave % Wrap up. end .setglobal } odef % Check whether an object is a procedure. /.proccheck { % <obj> .proccheck <bool> dup xcheck exch type dup /arraytype eq exch /packedarraytype eq or and } bind def % Create a context with private local VM. % The .localfork operator does all the work, but we must ensure that % .initlocaldicts gets called when the new context starts up. /localfork { % <mark> <obj1> ... <objN> <proc> % <stdin|null> <stdout|null> % localfork <context> .currentglobal true .setglobal 3 index dup .proccheck not { pop .setglobal /localfork cvx /typecheck signalerror } if {exec .initlocaldicts} aload pop 3 1 roll 3 packedarray cvx 4 1 roll 5 -1 roll pop .setglobal .localfork } odef % Fork a context that shares VM. The .fork operator creates an empty % userparams dictionary for the context, but we still need to initialize % this dictionary when the new context starts up. /.postfork { % - .postfork - % Initialize the user parameters. savedlocaldicts /userparams get userparams .copydict readonly pop } odef /fork { % <mark> <obj1> ... <objN> <proc> fork <context> .currentglobal false .setglobal 1 index dup .proccheck not { pop .setglobal /fork cvx /typecheck signalerror } if {exec .postfork} aload pop 3 1 roll 3 packedarray cvx 3 1 roll exch pop .setglobal .fork } odef % ------ Halftone phase ------ % /sethalftonephase { % <x> <y> sethalftonephase - -1 2 index 2 index .setscreenphase pop pop } odef /currenthalftonephase { % - currenthalftonephase <x> <y> 0 .currentscreenphase } odef % ------ Device-source images ------ */ .imagetypes 2 /.image2 load put % ------ Device information ------ % /.deviceinfodict mark /Colors null /GrayValues null /RedValues null /GreenValues null /BlueValues null /ColorValues null .dicttomark readonly def /deviceinfo { % - deviceinfo <dict> currentdevice //.deviceinfodict .getdeviceparams .dicttomark dup begin /ColorValues .knownget { 0 le { currentdict /ColorValues undef } { % hack around devices that incorrect set GrayValues Colors 3 eq { 1 } { GrayValues } ifelse RedValues mul GreenValues mul BlueValues mul ColorValues ne { currentdict /GrayValues undef currentdict /RedValues undef currentdict /GreenValues undef currentdict /BlueValues undef } if } ifelse } if currentdict end readonly } odef % The current implementation allocates a 2-element array each time. % Perhaps we should change this to 2 separate parameters for X and Y? /.wtdict mark /wtranslation null .dicttomark readonly def /wtranslation { % - wtranslation <x> <y> currentdevice //.wtdict .getdeviceparams exch pop exch pop aload pop } odef currentdict /.wtdict .undef % ------ View clipping ------ % /rectviewclip { % <x> <y> <width> <height> rectviewclip - % <numarray|numstring> rectviewclip - newpath .rectappend viewclip } odef