ref: c6a92afc7ac0382d90bf0fbd1d2e3e258a57aad4
dir: /sys/man/8/wpa/
.TH WPA 8 .SH NAME wpa \- Wi-Fi Protected Access setup .SH SYNOPSIS .B aux/wpa [ .B -dp12 ] [ .B -s .I essid ] .I dev .SH DESCRIPTION .I Wpa handles the authentication and key exchange with WPA protected wireless networks. .PP The .I dev parameter specifies the network interface that needs to be setup with WPA. The .I essid can be set with the .I -s option. Otherwise, the previously configured essid on the interface will be used. The .B -p option will prompt and install the preshared key or pap/chap credentials into factotum, otherwise the key has to be already present in factotum or an interactive key prompter like auth/fgui (see .IR factotum (4)) needs to provide it. .PP The authentication protocol is initiated by the wireless access point so .I wpa will background itself after the keyprompt and establish the encryption automatically as needed. The optional .B -1 or .B -2 arguments can be used to select between WPA1/TKIP (default) or WPA2/CCMP encryption with WPA PSK. .PP The .B -d option enables debugging and causes .I wpa to stay in foreground writing protocol messages to standard error. .SH EXAMPLES Setup wireless encryption: .EX % bind -a '#l1' /net % aux/wpa -s 9HAL -p /net/ether1 !Adding key: proto=wpapsk essid=9HAL password: ***** ! % ip/ipconfig ether /net/ether1 .EE .SH SOURCE .B /sys/src/cmd/aux/wpa.c .SH SEE ALSO .IR factotum (4), .IR ipconfig (8) .SH HISTORY .I Wpa first appeared in 9front (March, 2013).