ref: c7d9da8f5a41b833946027c802e0e8d7dd014b22
dir: /sys/src/cmd/python/Modules/errnomodule.c/
/* Errno module */
#include "Python.h"
/* Windows socket errors (WSA*) */
#ifdef MS_WINDOWS
#include <winsock.h>
#endif
/*
* Pull in the system error definitions
*/
static PyMethodDef errno_methods[] = {
{NULL, NULL}
};
/* Helper function doing the dictionary inserting */
static void
_inscode(PyObject *d, PyObject *de, char *name, int code)
{
PyObject *u = PyString_FromString(name);
PyObject *v = PyInt_FromLong((long) code);
/* Don't bother checking for errors; they'll be caught at the end
* of the module initialization function by the caller of
* initerrno().
*/
if (u && v) {
/* insert in modules dict */
PyDict_SetItem(d, u, v);
/* insert in errorcode dict */
PyDict_SetItem(de, v, u);
}
Py_XDECREF(u);
Py_XDECREF(v);
}
PyDoc_STRVAR(errno__doc__,
"This module makes available standard errno system symbols.\n\
\n\
The value of each symbol is the corresponding integer value,\n\
e.g., on most systems, errno.ENOENT equals the integer 2.\n\
\n\
The dictionary errno.errorcode maps numeric codes to symbol names,\n\
e.g., errno.errorcode[2] could be the string 'ENOENT'.\n\
\n\
Symbols that are not relevant to the underlying system are not defined.\n\
\n\
To map error codes to error messages, use the function os.strerror(),\n\
e.g. os.strerror(2) could return 'No such file or directory'.");
PyMODINIT_FUNC
initerrno(void)
{
PyObject *m, *d, *de;
m = Py_InitModule3("errno", errno_methods, errno__doc__);
if (m == NULL)
return;
d = PyModule_GetDict(m);
de = PyDict_New();
if (!d || !de || PyDict_SetItemString(d, "errorcode", de) < 0)
return;
/* Macro so I don't have to edit each and every line below... */
#define inscode(d, ds, de, name, code, comment) _inscode(d, de, name, code)
/*
* The names and comments are borrowed from linux/include/errno.h,
* which should be pretty all-inclusive
*/
#ifdef ENODEV
inscode(d, ds, de, "ENODEV", ENODEV, "No such device");
#endif
#ifdef ENOCSI
inscode(d, ds, de, "ENOCSI", ENOCSI, "No CSI structure available");
#endif
#ifdef EHOSTUNREACH
inscode(d, ds, de, "EHOSTUNREACH", EHOSTUNREACH, "No route to host");
#else
#ifdef WSAEHOSTUNREACH
inscode(d, ds, de, "EHOSTUNREACH", WSAEHOSTUNREACH, "No route to host");
#endif
#endif
#ifdef ENOMSG
inscode(d, ds, de, "ENOMSG", ENOMSG, "No message of desired type");
#endif
#ifdef EUCLEAN
inscode(d, ds, de, "EUCLEAN", EUCLEAN, "Structure needs cleaning");
#endif
#ifdef EL2NSYNC
inscode(d, ds, de, "EL2NSYNC", EL2NSYNC, "Level 2 not synchronized");
#endif
#ifdef EL2HLT
inscode(d, ds, de, "EL2HLT", EL2HLT, "Level 2 halted");
#endif
#ifdef ENODATA
inscode(d, ds, de, "ENODATA", ENODATA, "No data available");
#endif
#ifdef ENOTBLK
inscode(d, ds, de, "ENOTBLK", ENOTBLK, "Block device required");
#endif
#ifdef ENOSYS
inscode(d, ds, de, "ENOSYS", ENOSYS, "Function not implemented");
#endif
#ifdef EPIPE
inscode(d, ds, de, "EPIPE", EPIPE, "Broken pipe");
#endif
#ifdef EINVAL
inscode(d, ds, de, "EINVAL", EINVAL, "Invalid argument");
#else
#ifdef WSAEINVAL
inscode(d, ds, de, "EINVAL", WSAEINVAL, "Invalid argument");
#endif
#endif
#ifdef EOVERFLOW
inscode(d, ds, de, "EOVERFLOW", EOVERFLOW, "Value too large for defined data type");
#endif
#ifdef EADV
inscode(d, ds, de, "EADV", EADV, "Advertise error");
#endif
#ifdef EINTR
inscode(d, ds, de, "EINTR", EINTR, "Interrupted system call");
#else
#ifdef WSAEINTR
inscode(d, ds, de, "EINTR", WSAEINTR, "Interrupted system call");
#endif
#endif
#ifdef EUSERS
inscode(d, ds, de, "EUSERS", EUSERS, "Too many users");
#else
#ifdef WSAEUSERS
inscode(d, ds, de, "EUSERS", WSAEUSERS, "Too many users");
#endif
#endif
#ifdef ENOTEMPTY
inscode(d, ds, de, "ENOTEMPTY", ENOTEMPTY, "Directory not empty");
#else
#ifdef WSAENOTEMPTY
inscode(d, ds, de, "ENOTEMPTY", WSAENOTEMPTY, "Directory not empty");
#endif
#endif
#ifdef ENOBUFS
inscode(d, ds, de, "ENOBUFS", ENOBUFS, "No buffer space available");
#else
#ifdef WSAENOBUFS
inscode(d, ds, de, "ENOBUFS", WSAENOBUFS, "No buffer space available");
#endif
#endif
#ifdef EPROTO
inscode(d, ds, de, "EPROTO", EPROTO, "Protocol error");
#endif
#ifdef EREMOTE
inscode(d, ds, de, "EREMOTE", EREMOTE, "Object is remote");
#else
#ifdef WSAEREMOTE
inscode(d, ds, de, "EREMOTE", WSAEREMOTE, "Object is remote");
#endif
#endif
#ifdef ENAVAIL
inscode(d, ds, de, "ENAVAIL", ENAVAIL, "No XENIX semaphores available");
#endif
#ifdef ECHILD
inscode(d, ds, de, "ECHILD", ECHILD, "No child processes");
#endif
#ifdef ELOOP
inscode(d, ds, de, "ELOOP", ELOOP, "Too many symbolic links encountered");
#else
#ifdef WSAELOOP
inscode(d, ds, de, "ELOOP", WSAELOOP, "Too many symbolic links encountered");
#endif
#endif
#ifdef EXDEV
inscode(d, ds, de, "EXDEV", EXDEV, "Cross-device link");
#endif
#ifdef E2BIG
inscode(d, ds, de, "E2BIG", E2BIG, "Arg list too long");
#endif
#ifdef ESRCH
inscode(d, ds, de, "ESRCH", ESRCH, "No such process");
#endif
#ifdef EMSGSIZE
inscode(d, ds, de, "EMSGSIZE", EMSGSIZE, "Message too long");
#else
#ifdef WSAEMSGSIZE
inscode(d, ds, de, "EMSGSIZE", WSAEMSGSIZE, "Message too long");
#endif
#endif
#ifdef EAFNOSUPPORT
inscode(d, ds, de, "EAFNOSUPPORT", EAFNOSUPPORT, "Address family not supported by protocol");
#else
#ifdef WSAEAFNOSUPPORT
inscode(d, ds, de, "EAFNOSUPPORT", WSAEAFNOSUPPORT, "Address family not supported by protocol");
#endif
#endif
#ifdef EBADR
inscode(d, ds, de, "EBADR", EBADR, "Invalid request descriptor");
#endif
#ifdef EHOSTDOWN
inscode(d, ds, de, "EHOSTDOWN", EHOSTDOWN, "Host is down");
#else
#ifdef WSAEHOSTDOWN
inscode(d, ds, de, "EHOSTDOWN", WSAEHOSTDOWN, "Host is down");
#endif
#endif
#ifdef EPFNOSUPPORT
inscode(d, ds, de, "EPFNOSUPPORT", EPFNOSUPPORT, "Protocol family not supported");
#else
#ifdef WSAEPFNOSUPPORT
inscode(d, ds, de, "EPFNOSUPPORT", WSAEPFNOSUPPORT, "Protocol family not supported");
#endif
#endif
#ifdef ENOPROTOOPT
inscode(d, ds, de, "ENOPROTOOPT", ENOPROTOOPT, "Protocol not available");
#else
#ifdef WSAENOPROTOOPT
inscode(d, ds, de, "ENOPROTOOPT", WSAENOPROTOOPT, "Protocol not available");
#endif
#endif
#ifdef EBUSY
inscode(d, ds, de, "EBUSY", EBUSY, "Device or resource busy");
#endif
#ifdef EWOULDBLOCK
inscode(d, ds, de, "EWOULDBLOCK", EWOULDBLOCK, "Operation would block");
#else
#ifdef WSAEWOULDBLOCK
inscode(d, ds, de, "EWOULDBLOCK", WSAEWOULDBLOCK, "Operation would block");
#endif
#endif
#ifdef EBADFD
inscode(d, ds, de, "EBADFD", EBADFD, "File descriptor in bad state");
#endif
#ifdef EDOTDOT
inscode(d, ds, de, "EDOTDOT", EDOTDOT, "RFS specific error");
#endif
#ifdef EISCONN
inscode(d, ds, de, "EISCONN", EISCONN, "Transport endpoint is already connected");
#else
#ifdef WSAEISCONN
inscode(d, ds, de, "EISCONN", WSAEISCONN, "Transport endpoint is already connected");
#endif
#endif
#ifdef ENOANO
inscode(d, ds, de, "ENOANO", ENOANO, "No anode");
#endif
#ifdef ESHUTDOWN
inscode(d, ds, de, "ESHUTDOWN", ESHUTDOWN, "Cannot send after transport endpoint shutdown");
#else
#ifdef WSAESHUTDOWN
inscode(d, ds, de, "ESHUTDOWN", WSAESHUTDOWN, "Cannot send after transport endpoint shutdown");
#endif
#endif
#ifdef ECHRNG
inscode(d, ds, de, "ECHRNG", ECHRNG, "Channel number out of range");
#endif
#ifdef ELIBBAD
inscode(d, ds, de, "ELIBBAD", ELIBBAD, "Accessing a corrupted shared library");
#endif
#ifdef ENONET
inscode(d, ds, de, "ENONET", ENONET, "Machine is not on the network");
#endif
#ifdef EBADE
inscode(d, ds, de, "EBADE", EBADE, "Invalid exchange");
#endif
#ifdef EBADF
inscode(d, ds, de, "EBADF", EBADF, "Bad file number");
#else
#ifdef WSAEBADF
inscode(d, ds, de, "EBADF", WSAEBADF, "Bad file number");
#endif
#endif
#ifdef EMULTIHOP
inscode(d, ds, de, "EMULTIHOP", EMULTIHOP, "Multihop attempted");
#endif
#ifdef EIO
inscode(d, ds, de, "EIO", EIO, "I/O error");
#endif
#ifdef EUNATCH
inscode(d, ds, de, "EUNATCH", EUNATCH, "Protocol driver not attached");
#endif
#ifdef EPROTOTYPE
inscode(d, ds, de, "EPROTOTYPE", EPROTOTYPE, "Protocol wrong type for socket");
#else
#ifdef WSAEPROTOTYPE
inscode(d, ds, de, "EPROTOTYPE", WSAEPROTOTYPE, "Protocol wrong type for socket");
#endif
#endif
#ifdef ENOSPC
inscode(d, ds, de, "ENOSPC", ENOSPC, "No space left on device");
#endif
#ifdef ENOEXEC
inscode(d, ds, de, "ENOEXEC", ENOEXEC, "Exec format error");
#endif
#ifdef EALREADY
inscode(d, ds, de, "EALREADY", EALREADY, "Operation already in progress");
#else
#ifdef WSAEALREADY
inscode(d, ds, de, "EALREADY", WSAEALREADY, "Operation already in progress");
#endif
#endif
#ifdef ENETDOWN
inscode(d, ds, de, "ENETDOWN", ENETDOWN, "Network is down");
#else
#ifdef WSAENETDOWN
inscode(d, ds, de, "ENETDOWN", WSAENETDOWN, "Network is down");
#endif
#endif
#ifdef ENOTNAM
inscode(d, ds, de, "ENOTNAM", ENOTNAM, "Not a XENIX named type file");
#endif
#ifdef EACCES
inscode(d, ds, de, "EACCES", EACCES, "Permission denied");
#else
#ifdef WSAEACCES
inscode(d, ds, de, "EACCES", WSAEACCES, "Permission denied");
#endif
#endif
#ifdef ELNRNG
inscode(d, ds, de, "ELNRNG", ELNRNG, "Link number out of range");
#endif
#ifdef EILSEQ
inscode(d, ds, de, "EILSEQ", EILSEQ, "Illegal byte sequence");
#endif
#ifdef ENOTDIR
inscode(d, ds, de, "ENOTDIR", ENOTDIR, "Not a directory");
#endif
#ifdef ENOTUNIQ
inscode(d, ds, de, "ENOTUNIQ", ENOTUNIQ, "Name not unique on network");
#endif
#ifdef EPERM
inscode(d, ds, de, "EPERM", EPERM, "Operation not permitted");
#endif
#ifdef EDOM
inscode(d, ds, de, "EDOM", EDOM, "Math argument out of domain of func");
#endif
#ifdef EXFULL
inscode(d, ds, de, "EXFULL", EXFULL, "Exchange full");
#endif
#ifdef ECONNREFUSED
inscode(d, ds, de, "ECONNREFUSED", ECONNREFUSED, "Connection refused");
#else
#ifdef WSAECONNREFUSED
inscode(d, ds, de, "ECONNREFUSED", WSAECONNREFUSED, "Connection refused");
#endif
#endif
#ifdef EISDIR
inscode(d, ds, de, "EISDIR", EISDIR, "Is a directory");
#endif
#ifdef EPROTONOSUPPORT
inscode(d, ds, de, "EPROTONOSUPPORT", EPROTONOSUPPORT, "Protocol not supported");
#else
#ifdef WSAEPROTONOSUPPORT
inscode(d, ds, de, "EPROTONOSUPPORT", WSAEPROTONOSUPPORT, "Protocol not supported");
#endif
#endif
#ifdef EROFS
inscode(d, ds, de, "EROFS", EROFS, "Read-only file system");
#endif
#ifdef EADDRNOTAVAIL
inscode(d, ds, de, "EADDRNOTAVAIL", EADDRNOTAVAIL, "Cannot assign requested address");
#else
#ifdef WSAEADDRNOTAVAIL
inscode(d, ds, de, "EADDRNOTAVAIL", WSAEADDRNOTAVAIL, "Cannot assign requested address");
#endif
#endif
#ifdef EIDRM
inscode(d, ds, de, "EIDRM", EIDRM, "Identifier removed");
#endif
#ifdef ECOMM
inscode(d, ds, de, "ECOMM", ECOMM, "Communication error on send");
#endif
#ifdef ESRMNT
inscode(d, ds, de, "ESRMNT", ESRMNT, "Srmount error");
#endif
#ifdef EREMOTEIO
inscode(d, ds, de, "EREMOTEIO", EREMOTEIO, "Remote I/O error");
#endif
#ifdef EL3RST
inscode(d, ds, de, "EL3RST", EL3RST, "Level 3 reset");
#endif
#ifdef EBADMSG
inscode(d, ds, de, "EBADMSG", EBADMSG, "Not a data message");
#endif
#ifdef ENFILE
inscode(d, ds, de, "ENFILE", ENFILE, "File table overflow");
#endif
#ifdef ELIBMAX
inscode(d, ds, de, "ELIBMAX", ELIBMAX, "Attempting to link in too many shared libraries");
#endif
#ifdef ESPIPE
inscode(d, ds, de, "ESPIPE", ESPIPE, "Illegal seek");
#endif
#ifdef ENOLINK
inscode(d, ds, de, "ENOLINK", ENOLINK, "Link has been severed");
#endif
#ifdef ENETRESET
inscode(d, ds, de, "ENETRESET", ENETRESET, "Network dropped connection because of reset");
#else
#ifdef WSAENETRESET
inscode(d, ds, de, "ENETRESET", WSAENETRESET, "Network dropped connection because of reset");
#endif
#endif
#ifdef ETIMEDOUT
inscode(d, ds, de, "ETIMEDOUT", ETIMEDOUT, "Connection timed out");
#else
#ifdef WSAETIMEDOUT
inscode(d, ds, de, "ETIMEDOUT", WSAETIMEDOUT, "Connection timed out");
#endif
#endif
#ifdef ENOENT
inscode(d, ds, de, "ENOENT", ENOENT, "No such file or directory");
#endif
#ifdef EEXIST
inscode(d, ds, de, "EEXIST", EEXIST, "File exists");
#endif
#ifdef EDQUOT
inscode(d, ds, de, "EDQUOT", EDQUOT, "Quota exceeded");
#else
#ifdef WSAEDQUOT
inscode(d, ds, de, "EDQUOT", WSAEDQUOT, "Quota exceeded");
#endif
#endif
#ifdef ENOSTR
inscode(d, ds, de, "ENOSTR", ENOSTR, "Device not a stream");
#endif
#ifdef EBADSLT
inscode(d, ds, de, "EBADSLT", EBADSLT, "Invalid slot");
#endif
#ifdef EBADRQC
inscode(d, ds, de, "EBADRQC", EBADRQC, "Invalid request code");
#endif
#ifdef ELIBACC
inscode(d, ds, de, "ELIBACC", ELIBACC, "Can not access a needed shared library");
#endif
#ifdef EFAULT
inscode(d, ds, de, "EFAULT", EFAULT, "Bad address");
#else
#ifdef WSAEFAULT
inscode(d, ds, de, "EFAULT", WSAEFAULT, "Bad address");
#endif
#endif
#ifdef EFBIG
inscode(d, ds, de, "EFBIG", EFBIG, "File too large");
#endif
#ifdef EDEADLK
inscode(d, ds, de, "EDEADLK", EDEADLK, "Resource deadlock would occur");
#endif
#ifdef ENOTCONN
inscode(d, ds, de, "ENOTCONN", ENOTCONN, "Transport endpoint is not connected");
#else
#ifdef WSAENOTCONN
inscode(d, ds, de, "ENOTCONN", WSAENOTCONN, "Transport endpoint is not connected");
#endif
#endif
#ifdef EDESTADDRREQ
inscode(d, ds, de, "EDESTADDRREQ", EDESTADDRREQ, "Destination address required");
#else
#ifdef WSAEDESTADDRREQ
inscode(d, ds, de, "EDESTADDRREQ", WSAEDESTADDRREQ, "Destination address required");
#endif
#endif
#ifdef ELIBSCN
inscode(d, ds, de, "ELIBSCN", ELIBSCN, ".lib section in a.out corrupted");
#endif
#ifdef ENOLCK
inscode(d, ds, de, "ENOLCK", ENOLCK, "No record locks available");
#endif
#ifdef EISNAM
inscode(d, ds, de, "EISNAM", EISNAM, "Is a named type file");
#endif
#ifdef ECONNABORTED
inscode(d, ds, de, "ECONNABORTED", ECONNABORTED, "Software caused connection abort");
#else
#ifdef WSAECONNABORTED
inscode(d, ds, de, "ECONNABORTED", WSAECONNABORTED, "Software caused connection abort");
#endif
#endif
#ifdef ENETUNREACH
inscode(d, ds, de, "ENETUNREACH", ENETUNREACH, "Network is unreachable");
#else
#ifdef WSAENETUNREACH
inscode(d, ds, de, "ENETUNREACH", WSAENETUNREACH, "Network is unreachable");
#endif
#endif
#ifdef ESTALE
inscode(d, ds, de, "ESTALE", ESTALE, "Stale NFS file handle");
#else
#ifdef WSAESTALE
inscode(d, ds, de, "ESTALE", WSAESTALE, "Stale NFS file handle");
#endif
#endif
#ifdef ENOSR
inscode(d, ds, de, "ENOSR", ENOSR, "Out of streams resources");
#endif
#ifdef ENOMEM
inscode(d, ds, de, "ENOMEM", ENOMEM, "Out of memory");
#endif
#ifdef ENOTSOCK
inscode(d, ds, de, "ENOTSOCK", ENOTSOCK, "Socket operation on non-socket");
#else
#ifdef WSAENOTSOCK
inscode(d, ds, de, "ENOTSOCK", WSAENOTSOCK, "Socket operation on non-socket");
#endif
#endif
#ifdef ESTRPIPE
inscode(d, ds, de, "ESTRPIPE", ESTRPIPE, "Streams pipe error");
#endif
#ifdef EMLINK
inscode(d, ds, de, "EMLINK", EMLINK, "Too many links");
#endif
#ifdef ERANGE
inscode(d, ds, de, "ERANGE", ERANGE, "Math result not representable");
#endif
#ifdef ELIBEXEC
inscode(d, ds, de, "ELIBEXEC", ELIBEXEC, "Cannot exec a shared library directly");
#endif
#ifdef EL3HLT
inscode(d, ds, de, "EL3HLT", EL3HLT, "Level 3 halted");
#endif
#ifdef ECONNRESET
inscode(d, ds, de, "ECONNRESET", ECONNRESET, "Connection reset by peer");
#else
#ifdef WSAECONNRESET
inscode(d, ds, de, "ECONNRESET", WSAECONNRESET, "Connection reset by peer");
#endif
#endif
#ifdef EADDRINUSE
inscode(d, ds, de, "EADDRINUSE", EADDRINUSE, "Address already in use");
#else
#ifdef WSAEADDRINUSE
inscode(d, ds, de, "EADDRINUSE", WSAEADDRINUSE, "Address already in use");
#endif
#endif
#ifdef EOPNOTSUPP
inscode(d, ds, de, "EOPNOTSUPP", EOPNOTSUPP, "Operation not supported on transport endpoint");
#else
#ifdef WSAEOPNOTSUPP
inscode(d, ds, de, "EOPNOTSUPP", WSAEOPNOTSUPP, "Operation not supported on transport endpoint");
#endif
#endif
#ifdef EREMCHG
inscode(d, ds, de, "EREMCHG", EREMCHG, "Remote address changed");
#endif
#ifdef EAGAIN
inscode(d, ds, de, "EAGAIN", EAGAIN, "Try again");
#endif
#ifdef ENAMETOOLONG
inscode(d, ds, de, "ENAMETOOLONG", ENAMETOOLONG, "File name too long");
#else
#ifdef WSAENAMETOOLONG
inscode(d, ds, de, "ENAMETOOLONG", WSAENAMETOOLONG, "File name too long");
#endif
#endif
#ifdef ENOTTY
inscode(d, ds, de, "ENOTTY", ENOTTY, "Not a typewriter");
#endif
#ifdef ERESTART
inscode(d, ds, de, "ERESTART", ERESTART, "Interrupted system call should be restarted");
#endif
#ifdef ESOCKTNOSUPPORT
inscode(d, ds, de, "ESOCKTNOSUPPORT", ESOCKTNOSUPPORT, "Socket type not supported");
#else
#ifdef WSAESOCKTNOSUPPORT
inscode(d, ds, de, "ESOCKTNOSUPPORT", WSAESOCKTNOSUPPORT, "Socket type not supported");
#endif
#endif
#ifdef ETIME
inscode(d, ds, de, "ETIME", ETIME, "Timer expired");
#endif
#ifdef EBFONT
inscode(d, ds, de, "EBFONT", EBFONT, "Bad font file format");
#endif
#ifdef EDEADLOCK
inscode(d, ds, de, "EDEADLOCK", EDEADLOCK, "Error EDEADLOCK");
#endif
#ifdef ETOOMANYREFS
inscode(d, ds, de, "ETOOMANYREFS", ETOOMANYREFS, "Too many references: cannot splice");
#else
#ifdef WSAETOOMANYREFS
inscode(d, ds, de, "ETOOMANYREFS", WSAETOOMANYREFS, "Too many references: cannot splice");
#endif
#endif
#ifdef EMFILE
inscode(d, ds, de, "EMFILE", EMFILE, "Too many open files");
#else
#ifdef WSAEMFILE
inscode(d, ds, de, "EMFILE", WSAEMFILE, "Too many open files");
#endif
#endif
#ifdef ETXTBSY
inscode(d, ds, de, "ETXTBSY", ETXTBSY, "Text file busy");
#endif
#ifdef EINPROGRESS
inscode(d, ds, de, "EINPROGRESS", EINPROGRESS, "Operation now in progress");
#else
#ifdef WSAEINPROGRESS
inscode(d, ds, de, "EINPROGRESS", WSAEINPROGRESS, "Operation now in progress");
#endif
#endif
#ifdef ENXIO
inscode(d, ds, de, "ENXIO", ENXIO, "No such device or address");
#endif
#ifdef ENOPKG
inscode(d, ds, de, "ENOPKG", ENOPKG, "Package not installed");
#endif
#ifdef WSASY
inscode(d, ds, de, "WSASY", WSASY, "Error WSASY");
#endif
#ifdef WSAEHOSTDOWN
inscode(d, ds, de, "WSAEHOSTDOWN", WSAEHOSTDOWN, "Host is down");
#endif
#ifdef WSAENETDOWN
inscode(d, ds, de, "WSAENETDOWN", WSAENETDOWN, "Network is down");
#endif
#ifdef WSAENOTSOCK
inscode(d, ds, de, "WSAENOTSOCK", WSAENOTSOCK, "Socket operation on non-socket");
#endif
#ifdef WSAEHOSTUNREACH
inscode(d, ds, de, "WSAEHOSTUNREACH", WSAEHOSTUNREACH, "No route to host");
#endif
#ifdef WSAELOOP
inscode(d, ds, de, "WSAELOOP", WSAELOOP, "Too many symbolic links encountered");
#endif
#ifdef WSAEMFILE
inscode(d, ds, de, "WSAEMFILE", WSAEMFILE, "Too many open files");
#endif
#ifdef WSAESTALE
inscode(d, ds, de, "WSAESTALE", WSAESTALE, "Stale NFS file handle");
#endif
#ifdef WSAVERNOTSUPPORTED
inscode(d, ds, de, "WSAVERNOTSUPPORTED", WSAVERNOTSUPPORTED, "Error WSAVERNOTSUPPORTED");
#endif
#ifdef WSAENETUNREACH
inscode(d, ds, de, "WSAENETUNREACH", WSAENETUNREACH, "Network is unreachable");
#endif
#ifdef WSAEPROCLIM
inscode(d, ds, de, "WSAEPROCLIM", WSAEPROCLIM, "Error WSAEPROCLIM");
#endif
#ifdef WSAEFAULT
inscode(d, ds, de, "WSAEFAULT", WSAEFAULT, "Bad address");
#endif
#ifdef WSANOTINITIALISED
inscode(d, ds, de, "WSANOTINITIALISED", WSANOTINITIALISED, "Error WSANOTINITIALISED");
#endif
#ifdef WSAEUSERS
inscode(d, ds, de, "WSAEUSERS", WSAEUSERS, "Too many users");
#endif
#ifdef WSAMAKEASYNCREPL
inscode(d, ds, de, "WSAMAKEASYNCREPL", WSAMAKEASYNCREPL, "Error WSAMAKEASYNCREPL");
#endif
#ifdef WSAENOPROTOOPT
inscode(d, ds, de, "WSAENOPROTOOPT", WSAENOPROTOOPT, "Protocol not available");
#endif
#ifdef WSAECONNABORTED
inscode(d, ds, de, "WSAECONNABORTED", WSAECONNABORTED, "Software caused connection abort");
#endif
#ifdef WSAENAMETOOLONG
inscode(d, ds, de, "WSAENAMETOOLONG", WSAENAMETOOLONG, "File name too long");
#endif
#ifdef WSAENOTEMPTY
inscode(d, ds, de, "WSAENOTEMPTY", WSAENOTEMPTY, "Directory not empty");
#endif
#ifdef WSAESHUTDOWN
inscode(d, ds, de, "WSAESHUTDOWN", WSAESHUTDOWN, "Cannot send after transport endpoint shutdown");
#endif
#ifdef WSAEAFNOSUPPORT
inscode(d, ds, de, "WSAEAFNOSUPPORT", WSAEAFNOSUPPORT, "Address family not supported by protocol");
#endif
#ifdef WSAETOOMANYREFS
inscode(d, ds, de, "WSAETOOMANYREFS", WSAETOOMANYREFS, "Too many references: cannot splice");
#endif
#ifdef WSAEACCES
inscode(d, ds, de, "WSAEACCES", WSAEACCES, "Permission denied");
#endif
#ifdef WSATR
inscode(d, ds, de, "WSATR", WSATR, "Error WSATR");
#endif
#ifdef WSABASEERR
inscode(d, ds, de, "WSABASEERR", WSABASEERR, "Error WSABASEERR");
#endif
#ifdef WSADESCRIPTIO
inscode(d, ds, de, "WSADESCRIPTIO", WSADESCRIPTIO, "Error WSADESCRIPTIO");
#endif
#ifdef WSAEMSGSIZE
inscode(d, ds, de, "WSAEMSGSIZE", WSAEMSGSIZE, "Message too long");
#endif
#ifdef WSAEBADF
inscode(d, ds, de, "WSAEBADF", WSAEBADF, "Bad file number");
#endif
#ifdef WSAECONNRESET
inscode(d, ds, de, "WSAECONNRESET", WSAECONNRESET, "Connection reset by peer");
#endif
#ifdef WSAGETSELECTERRO
inscode(d, ds, de, "WSAGETSELECTERRO", WSAGETSELECTERRO, "Error WSAGETSELECTERRO");
#endif
#ifdef WSAETIMEDOUT
inscode(d, ds, de, "WSAETIMEDOUT", WSAETIMEDOUT, "Connection timed out");
#endif
#ifdef WSAENOBUFS
inscode(d, ds, de, "WSAENOBUFS", WSAENOBUFS, "No buffer space available");
#endif
#ifdef WSAEDISCON
inscode(d, ds, de, "WSAEDISCON", WSAEDISCON, "Error WSAEDISCON");
#endif
#ifdef WSAEINTR
inscode(d, ds, de, "WSAEINTR", WSAEINTR, "Interrupted system call");
#endif
#ifdef WSAEPROTOTYPE
inscode(d, ds, de, "WSAEPROTOTYPE", WSAEPROTOTYPE, "Protocol wrong type for socket");
#endif
#ifdef WSAHOS
inscode(d, ds, de, "WSAHOS", WSAHOS, "Error WSAHOS");
#endif
#ifdef WSAEADDRINUSE
inscode(d, ds, de, "WSAEADDRINUSE", WSAEADDRINUSE, "Address already in use");
#endif
#ifdef WSAEADDRNOTAVAIL
inscode(d, ds, de, "WSAEADDRNOTAVAIL", WSAEADDRNOTAVAIL, "Cannot assign requested address");
#endif
#ifdef WSAEALREADY
inscode(d, ds, de, "WSAEALREADY", WSAEALREADY, "Operation already in progress");
#endif
#ifdef WSAEPROTONOSUPPORT
inscode(d, ds, de, "WSAEPROTONOSUPPORT", WSAEPROTONOSUPPORT, "Protocol not supported");
#endif
#ifdef WSASYSNOTREADY
inscode(d, ds, de, "WSASYSNOTREADY", WSASYSNOTREADY, "Error WSASYSNOTREADY");
#endif
#ifdef WSAEWOULDBLOCK
inscode(d, ds, de, "WSAEWOULDBLOCK", WSAEWOULDBLOCK, "Operation would block");
#endif
#ifdef WSAEPFNOSUPPORT
inscode(d, ds, de, "WSAEPFNOSUPPORT", WSAEPFNOSUPPORT, "Protocol family not supported");
#endif
#ifdef WSAEOPNOTSUPP
inscode(d, ds, de, "WSAEOPNOTSUPP", WSAEOPNOTSUPP, "Operation not supported on transport endpoint");
#endif
#ifdef WSAEISCONN
inscode(d, ds, de, "WSAEISCONN", WSAEISCONN, "Transport endpoint is already connected");
#endif
#ifdef WSAEDQUOT
inscode(d, ds, de, "WSAEDQUOT", WSAEDQUOT, "Quota exceeded");
#endif
#ifdef WSAENOTCONN
inscode(d, ds, de, "WSAENOTCONN", WSAENOTCONN, "Transport endpoint is not connected");
#endif
#ifdef WSAEREMOTE
inscode(d, ds, de, "WSAEREMOTE", WSAEREMOTE, "Object is remote");
#endif
#ifdef WSAEINVAL
inscode(d, ds, de, "WSAEINVAL", WSAEINVAL, "Invalid argument");
#endif
#ifdef WSAEINPROGRESS
inscode(d, ds, de, "WSAEINPROGRESS", WSAEINPROGRESS, "Operation now in progress");
#endif
#ifdef WSAGETSELECTEVEN
inscode(d, ds, de, "WSAGETSELECTEVEN", WSAGETSELECTEVEN, "Error WSAGETSELECTEVEN");
#endif
#ifdef WSAESOCKTNOSUPPORT
inscode(d, ds, de, "WSAESOCKTNOSUPPORT", WSAESOCKTNOSUPPORT, "Socket type not supported");
#endif
#ifdef WSAGETASYNCERRO
inscode(d, ds, de, "WSAGETASYNCERRO", WSAGETASYNCERRO, "Error WSAGETASYNCERRO");
#endif
#ifdef WSAMAKESELECTREPL
inscode(d, ds, de, "WSAMAKESELECTREPL", WSAMAKESELECTREPL, "Error WSAMAKESELECTREPL");
#endif
#ifdef WSAGETASYNCBUFLE
inscode(d, ds, de, "WSAGETASYNCBUFLE", WSAGETASYNCBUFLE, "Error WSAGETASYNCBUFLE");
#endif
#ifdef WSAEDESTADDRREQ
inscode(d, ds, de, "WSAEDESTADDRREQ", WSAEDESTADDRREQ, "Destination address required");
#endif
#ifdef WSAECONNREFUSED
inscode(d, ds, de, "WSAECONNREFUSED", WSAECONNREFUSED, "Connection refused");
#endif
#ifdef WSAENETRESET
inscode(d, ds, de, "WSAENETRESET", WSAENETRESET, "Network dropped connection because of reset");
#endif
#ifdef WSAN
inscode(d, ds, de, "WSAN", WSAN, "Error WSAN");
#endif
Py_DECREF(de);
}