ref: ec628c4dfbf62891e311567034936a0b2cb584c4
dir: /sys/doc/lexnames.ms/
.HTML "Lexical File Names in Plan 9 or Getting Dot-Dot Right
.hw re-create
.hw re-created
.TL
Lexical File Names in Plan 9
.br
or
.br
Getting Dot-Dot Right
.AU
Rob Pike
.CW [email protected]
.AI
.MH
.AB
.LP
Symbolic links make the Unix file system non-hierarchical, resulting in
multiple valid path names for a given file.
This ambiguity is a source of confusion, especially since some shells
work overtime to present a consistent view from programs such as
.CW pwd ,
while other programs and
the kernel itself do nothing about the problem.
.LP
Plan 9 has no symbolic links but it does have other mechanisms that produce the same difficulty.
Moreover, Plan 9 is founded on the ability to control a program's environment
by manipulating its name space.
Ambiguous names muddle the result of operations such as copying a name space across
the network.
.LP
To address these problems,
the Plan 9 kernel has been modified to maintain an accurate path name for every active
file (open file, working directory, mount table entry) in the system.
The definition of `accurate' is that the path name for a file is guaranteed to be the rooted,
absolute name
the program used to acquire it.
These names are maintained by an efficient method that combines lexical processing\(emsuch as
evaluating
.CW ..
by just removing the last path name element of a directory\(emwith
local operations within the file system to maintain a consistently, easily understood view
of the name system.
Ambiguous situations are resolved by examining the lexically maintained names themselves.
.LP
A new kernel call,
.CW fd2path ,
returns the file name associated with an open file,
permitting the use of reliable names to improve system
services ranging from
.CW pwd
to debugging.
Although this work was done in Plan 9,
Unix systems could also benefit from the addition of
a method to recover the accurate name of an
open file or the current directory.
.AE
.SH
Motivation
.LP
Consider the following unedited transcript of a session running the Bourne shell on a modern
Unix system:
.P1
% echo $HOME
/home/rob
% cd $HOME
% pwd
/n/bopp/v7/rob
% cd /home/rob
% cd /home/ken
% cd ../rob
\&../rob: bad directory
%
.P2
(The same output results from running
.CW tcsh ;
we'll discuss
.CW ksh
in a moment.)
To a neophyte being schooled in the delights of a hierarchical file name space,
this behavior must be baffling.
It is, of course, the consequence of a series of symbolic links intended to give users
the illusion they share a disk, when in fact their files are scattered over several devices:
.P1
.ps -1
% ls -ld /home/rob /home/ken
lrwxr-xr-x 1 root sys 14 Dec 26 1998 /home/ken -> /n/bopp/v6/ken
lrwxr-xr-x 1 root sys 14 Dec 23 1998 /home/rob -> /n/bopp/v7/rob
%
.ps
.P2
The introduction of symbolic links has changed the Unix file system from a true
hierarchy into a directed graph, rendering
.CW ..
ambiguous and sowing confusion.
.LP
Unix popularized hierarchical naming, but the introduction of symbolic links
made its naming irregular.
Worse, the
.CW pwd
command, through the underlying
.CW getwd
library routine,
uses a tricky, expensive algorithm that often delivers the wrong answer.
Starting from the current directory,
.CW getwd
opens the parent,
.CW .. ,
and searches it for an entry whose i-number matches the current directory;
the matching entry is the final path element of the ultimate result.
Applying this process iteratively,
.CW getwd
works back towards the root.
Since
.CW getwd
knows nothing about symbolic links, it will recover surprising names for
directories reached by them,
as illustrated by the example;
the backward paths
.CW getwd
traverses will not backtrack across the links.
.LP
Partly for efficiency and partly to make
.CW cd
and
.CW pwd
more predictable, the Korn shell
.CW ksh
[Korn94]
implements
.CW pwd
as a builtin.
(The
.CW cd
command must be a builtin in any shell, since the current directory is unique to each process.)
.CW Ksh
maintains its own private view of the file system to try to disguise symbolic links;
in particular,
.CW cd
and
.CW pwd
involve some lexical processing (somewhat like the
.CW cleanname
function discussed later
in this paper), augmented by heuristics such as examining the environment
for names like
.CW $HOME
and
.CW $PWD
to assist initialization of the state of the private view. [Korn00]
.LP
This transcript begins with a Bourne shell running:
.P1
% cd /home/rob
% pwd
/n/bopp/v7/rob
% ksh
$ pwd
/home/rob
$
.P2
This result is encouraging. Another example, again starting from a Bourne shell:
.P1
% cd /home/rob
% cd ../ken
\&../ken: bad directory
% ksh
$ pwd
/home/rob
$ cd ../ken
$ pwd
/home/ken
$
.P2
By doing extra work,
the Korn shell is providing more sensible behavior,
but it is easy to defeat:
.P1
% cd /home/rob
% pwd
/n/bopp/v7/rob
% cd bin
% pwd
/n/bopp/v7/rob/bin
% ksh
$ pwd
/n/bopp/v7/rob/bin
$ exit
% cd /home/ken
% pwd
/n/bopp/v6/ken
% ksh
$ pwd
/n/bopp/v6/ken
$
.P2
In these examples,
.CW ksh 's
built-in
.CW pwd
failed to produce the results
.CW /home/rob/bin "" (
and
.CW /home/ken )
that the previous example might have led us to expect.
The Korn shell is hiding the problem, not solving it, and in fact is not even hiding it very well.
.LP
A deeper question is whether the shell should even be trying to make
.CW pwd
and
.CW cd
do a better job.
If it does, then the
.CW getwd
library call and every program that uses it will behave differently from the shell,
a situation that is sure to confuse.
Moreover, the ability to change directory to
.CW ../ken
with the Korn shell's
.CW cd
command but not with the
.CW chdir
system call is a symptom of a diseased system, not a healthy shell.
.LP
The operating system should provide names that work and make sense.
Symbolic links, though, are here to stay, so we need a way to provide
sensible, unambiguous names in the face of a non-hierarchical name space.
This paper shows how the challenge was met on Plan 9, an operating system
with Unix-like naming.
.SH
Names in Plan 9
.LP
Except for some details involved with bootstrapping, file names in Plan 9 have the same syntax as in Unix.
Plan 9 has no symbolic links, but its name space construction operators,
.CW bind
and
.CW mount ,
make it possible to build the same sort of non-hierarchical structures created
by symbolically linking directories on Unix.
.LP
Plan 9's
.CW mount
system call takes a file descriptor
and attaches to the local name space the file system service it represents:
.P1
mount(fd, "/dir", flags)
.P2
Here
.CW fd
is a file descriptor to a communications port such as a pipe or network connection;
at the other end of the port is a service, such as file server, that talks 9P, the Plan 9 file
system protocol.
After the call succeeds, the root directory of the service will be visible at the
.I "mount point
.CW /dir ,
much as with the
.CW mount
call of Unix.
The
.CW flag
argument specifies the nature of the attachment:
.CW MREPL
says that the contents of the root directory (appear to) replace the current contents of
.CW /dir ;
.CW MAFTER
says that the current contents of
.CW dir
remain visible, with the mounted directory's contents appearing
.I after
any existing files;
and
.CW MBEFORE
says that the contents remain visible, with
the mounted directory's contents appearing
.I before
any existing files.
These multicomponent directories are called
.I "union directories
and are somewhat different from union directories in 4.4BSD-Lite [PeMc95], because
only the top-level directory itself is unioned, not its descendents, recursively.
(Plan 9's union directories are used differently from 4.4BSD-Lite's, as will become apparent.)
.LP
For example, to bootstrap a diskless computer the system builds a local name space containing
only the root directory,
.CW / ,
then uses the network to open a connection
to the main file server.
It then executes
.P1
mount(rootfd, "/", MREPL);
.P2
After this call, the entire file server's tree is visible, starting from the root of the local machine.
.LP
While
.CW mount
connects a new service to the local name space,
.CW bind
rearranges the existing name space:
.P1
bind("tofile", "fromfile", flags)
.P2
causes subsequent mention of the
.CW fromfile
(which may be a plain file or a directory)
to behave as though
.CW tofile
had been mentioned instead, somewhat like a symbolic link.
(Note, however, that the arguments are in the opposite order
compared to
.CW ln
.CW -s ).
The
.CW flags
argument is the same as with
.CW mount .
.LP
As an example, a sequence something like the following is done at bootstrap time to
assemble, under the single directory
.CW /bin ,
all of the binaries suitable for this architecture, represented by (say) the string
.CW sparc :
.P1
bind("/sparc/bin", "/bin", MREPL);
bind("/usr/rob/sparc/bin", "/bin", MAFTER);
.P2
This sequence of
.CW binds
causes
.CW /bin
to contain first the standard binaries, then the contents of
.CW rob 's
private SPARC binaries.
The ability to build such union directories
obviates the need for a shell
.CW $PATH
variable
while providing opportunities for managing heterogeneity.
If the system were a Power PC, the same sequence would be run with
.CW power
textually substituted for
.CW sparc
to place the Power PC binaries in
.CW /bin
rather than the SPARC binaries.
.LP
Trouble is already brewing. After these bindings are set up,
where does
.P1
% cd /bin
% cd ..
.P2
set the current working directory, to
.CW /
or
.CW /sparc
or
.CW /usr/rob/sparc ?
We will return to this issue.
.LP
There are some important differences between
.CW binds
and symbolic links.
First,
symbolic links are a static part of the file system, while
Plan 9 bindings are created at run time, are stored in the kernel,
and endure only as long as the system maintains them;
they are temporary.
Since they are known to the kernel but not the file system, they must
be set up each time the kernel boots or a user logs in;
permanent bindings are created by editing system initialization scripts
and user profiles rather than by building them in the file system itself.
.LP
The Plan 9 kernel records what bindings are active for a process,
whereas symbolic links, being held on the Unix file server, may strike whenever the process evaluates
a file name.
Also, symbolic links apply to all processes that evaluate the affected file, whereas
.CW bind
has a local scope, applying only to the process that executes it and possibly some of its
peers, as discussed in the next section.
Symbolic links cannot construct the sort of
.CW /bin
directory built here; it is possible to have multiple directories point to
.CW /bin
but not the other way around.
.LP
Finally,
symbolic links are symbolic, like macros: they evaluate the associated names each time
they are accessed.
Bindings, on the other hand, are evaluated only once, when the bind is executed;
after the binding is set up, the kernel associates the underlying files, rather than their names.
In fact, the kernel's representation of a bind is identical to its representation of a mount;
in effect, a bind is a mount of the
.CW tofile
upon the
.CW fromfile .
The binds and mounts coexist in a single
.I "mount table" ,
the subject of the next section.
.SH
The Mount Table
.LP
Unix has a single global mount table
for all processes in the system, but Plan 9's mount tables are local to each process.
By default it is inherited when a process forks, so mounts and binds made by one
process affect the other, but a process may instead inherit a copy,
so modifications it makes will be invisible to other processes.
The convention is that related processes, such
as processes running in a single window, share a mount table, while sets of processes
in different windows have distinct mount tables.
In practice, the name spaces of the two windows will appear largely the same,
but the possibility for different processes to see different files (hence services) under
the same name is fundamental to the system,
affecting the design of key programs such as the
window system [Pike91].
.LP
The Plan 9 mount table is little more than an ordered list of pairs, mapping the
.CW fromfiles
to the
.CW tofiles .
For mounts, the
.CW tofile
will be an item called a
.CW Channel ,
similar to a Unix
.CW vnode ,
pointing to the root of the file service,
while for a bind it will be the
.CW Channel
pointing to the
.CW tofile
mentioned in the
.CW bind
call.
In both cases, the
.CW fromfile
entry in the table
will be a
.CW Channel
pointing to the
.CW fromfile
itself.
.LP
The evaluation of a file name proceeds as follows.
If the name begins with a slash, start with the
.CW Channel
for the root; otherwise start with the
.CW Channel
for the current directory of the process.
For each path element in the name,
such as
.CW usr
in
.CW /usr/rob ,
try to `walk' the
.CW Channel
to that element [Pike93].
If the walk succeeds, look to see if the resulting
.CW Channel
is the same as any
.CW fromfile
in the mount table, and if so, replace it by the corresponding
.CW tofile .
Advance to the next element and continue.
.LP
There are a couple of nuances. If the directory being walked is a union directory,
the walk is attempted in the elements of the union, in order, until a walk succeeds.
If none succeed, the operation fails.
Also, when the destination of a walk is a directory for a purpose such as the
.CW chdir
system call or the
.CW fromfile
in a
.CW bind ,
once the final walk of the sequence has completed the operation stops;
the final check through the mount table is not done.
Among other things, this simplifies the management of union directories;
for example, subsequent
.CW bind
calls will append to the union associated with the underlying
.CW fromfile
instead of what is bound upon it.
.SH
A Definition of Dot-Dot
.LP
The ability to construct union directories and other intricate naming structures
introduces some thorny problems: as with symbolic links,
the name space is no longer hierarchical, files and directories can have multiple
names, and the meaning of
.CW .. ,
the parent directory, can be ambiguous.
.LP
The meaning of
.CW ..
is straightforward if the directory is in a locally hierarchical part of the name space,
but if we ask what
.CW ..
should identify when the current directory is a mount point or union directory or
multiply symlinked spot (which we will henceforth call just a mount point, for brevity),
there is no obvious answer.
Name spaces have been part of Plan 9 from the beginning, but the definition of
.CW ..
has changed several times as we grappled with this issue.
In fact, several attempts to clarify the meaning of
.CW ..
by clever coding
resulted in definitions that could charitably be summarized as `what the implementation gives.'
.LP
Frustrated by this situation, and eager to have better-defined names for some of the
applications described later in this paper, we recently proposed the following definition
for
.CW .. :
.IP
The parent of a directory
.I X ,
.I X\f(CW/..\f1,
is the same directory that would obtain if
we instead accessed the directory named by stripping away the last
path name element of
.I X .
.LP
For example, if we are in the directory
.CW /a/b/c
and
.CW chdir
to
.CW .. ,
the result is
.I exactly
as if we had executed a
.CW chdir
to
.CW /a/b .
.LP
This definition is easy to understand and seems natural.
It is, however, a purely
.I lexical
definition that flatly ignores evaluated file names, mount tables, and
other kernel-resident data structures.
Our challenge is to implement it efficiently.
One obvious (and correct)
implementation is to rewrite path names lexically to fold out
.CW .. ,
and then evaluate the file name forward from the root,
but this is expensive and unappealing.
We want to be able to use local operations to evaluate file names,
but maintain the global, lexical definition of dot-dot.
It isn't too hard.
.SH
The Implementation
.LP
To operate lexically on file names, we associate a name with each open file in the kernel, that
is, with each
.CW Channel
data structure.
The first step is therefore to store a
.CW char*
with each
.CW Channel
in the system, called its
.CW Cname ,
that records the
.I absolute
rooted
file name for the
.CW Channel .
.CW Cnames
are stored as full text strings, shared copy-on-write for efficiency.
The task is to maintain each
.CW Cname
as an accurate absolute name using only local operations.
.LP
When a file is opened, the file name argument in the
.CW open
(or
.CW chdir
or
.CW bind
or ...) call is recorded in the
.CW Cname
of the resulting
.CW Channel .
When the file name begins with a slash, the name is stored as is,
subject to a cleanup pass described in the next section.
Otherwise, it is a local name, and the file name must be made
absolute by prefixing it with the
.CW Cname
of the current directory, followed by a slash.
For example, if we are in
.CW /home/rob
and
.CW chdir
to
.CW bin ,
the
.CW Cname
of the resulting
.CW Channel
will be the string
.CW /home/rob/bin .
.LP
This assumes, of course, that the local file name contains no
.CW ..
elements.
If it does, instead of storing for example
.CW /home/rob/..
we delete the last element of the existing name and set the
.CW Cname
to
.CW /home .
To maintain the lexical naming property we must guarantee that the resulting
.CW Cname ,
if it were to be evaluated, would yield the identical directory to the one
we actually do get by the local
.CW ..
operation.
.LP
If the current directory is not a mount point, it is easy to maintain the lexical property.
If it is a mount point, though, it is still possible to maintain it on Plan 9
because the mount table, a kernel-resident data structure, contains all the
information about the non-hierarchical connectivity of the name space.
(On Unix, by contrast, symbolic links are stored on the file server rather than in the kernel.)
Moreover, the presence of a full file name for each
.CW Channel
in the mount table provides the information necessary to resolve ambiguities.
.LP
The mount table is examined in the
.CW from\f1\(->\fPto
direction when evaluating a name, but
.CW ..
points backwards in the hierarchy, so to evaluate
.CW ..
the table must be examined in the
.CW to\f1\(->\fPfrom
direction.
(``How did we get here?'')
.LP
The value of
.CW ..
is ambiguous when there are multiple bindings (mount points) that point to
the directories involved in the evaluation of
.CW .. .
For example, return to our original script with
.CW /n/bopp/v6
(containing a home directory for
.CW ken )
and
.CW /n/bopp/v7
(containing a home directory for
.CW rob )
unioned into
.CW /home .
This is represented by two entries in the mount table,
.CW from=/home ,
.CW to=/n/bopp/v6
and
.CW from=/home ,
.CW to=/n/bopp/v7 .
If we have set our current directory to
.CW /home/rob
(which has landed us in the physical location
.CW /n/bopp/v7/rob )
our current directory is not a mount point but its parent is.
The value of
.CW ..
is ambiguous: it could be
.CW /home ,
.CW /n/bopp/v7 ,
or maybe even
.CW /n/bopp/v6 ,
and the ambiguity is caused by two
.CW tofiles
bound to the same
.CW fromfile .
By our definition, if we now evaluate
.CW .. ,
we should acquire the directory
.CW /home ;
otherwise
.CW ../ken
could not possibly result in
.CW ken 's
home directory, which it should.
On the other hand, if we had originally gone to
.CW /n/bopp/v7/rob ,
the name
.CW ../ken
should
.I not
evaluate to
.CW ken 's
home directory because there is no directory
.CW /n/bopp/v7/ken
.CW ken 's (
home directory is on
.CW v6 ).
The problem is that by using local file operations, it is impossible
to distinguish these cases: regardless of whether we got here using the name
.CW /home/rob
or
.CW /n/bopp/v7/rob ,
the resulting directory is the same.
Moreover, the mount table does not itself have enough information
to disambiguate: when we do a local operation to evaluate
.CW ..
and land in
.CW /n/bopp/v7 ,
we discover that the directory is a
.CW tofile
in the mount table; should we step back through the table to
.CW /home
or not?
.LP
The solution comes from the
.CW Cnames
themselves.
Whether to step back through the mount point
.CW from=/home ,
.CW to=/n/bopp/v7
when evaluating
.CW ..
in
.CW rob 's
directory is trivially resolved by asking the question,
Does the
.CW Cname
for the directory begin
.CW /home ?
If it does, then the path that was evaluated to get us to the current
directory must have gone through this mount point, and we should
back up through it to evaluate
.CW .. ;
if not, then this mount table entry is irrelevant.
.LP
More precisely,
both
.I before
and
.I after
each
.CW ..
element in the path name is evaluated,
if the directory is a
.CW tofile
in the mount table, the corresponding
.CW fromfile
is taken instead, provided the
.CW Cname
of the corresponding
.CW fromfile
is the prefix of the
.CW Cname
of the original directory.
Since we always know the full name of the directory
we are evaluating, we can always compare it against all the entries in the mount table that point
to it, thereby resolving ambiguous situations
and maintaining the
lexical property of
.CW .. .
This check also guarantees we don't follow a misleading mount point, such as the entry pointing to
.CW /home
when we are really in
.CW /n/bopp/v7/rob .
Keeping the full names with the
.CW Channels
makes it easy to use the mount table to decide how we got here and, therefore,
how to get back.
.LP
In summary, the algorithm is as follows.
Use the usual file system operations to walk to
.CW .. ;
call the resulting directory
.I d .
Lexically remove
the last element of the initial file name.
Examine all entries in the mount table whose
.CW tofile
is
.I d
and whose
.CW fromfile
has a
.CW Cname
identical to the truncated name.
If one exists, that
.CW fromfile
is the correct result; by construction, it also has the right
.CW Cname .
In our example, evaluating
.CW ..
in
.CW /home/rob
(really
.CW /n/bopp/v7/rob )
will set
.I d
to
.CW /n/bopp/v7 ;
that is a
.CW tofile
whose
.CW fromfile
is
.CW /home .
Removing the
.CW /rob
from the original
.CW Cname ,
we find the name
.CW /home ,
which matches that of the
.CW fromfile ,
so the result is the
.CW fromfile ,
.CW /home .
.LP
Since this implementation uses only local operations to maintain its names,
it is possible to confuse it by external changes to the file system.
Deleting or renaming directories and files that are part of a
.CW Cname ,
or modifying the mount table, can introduce errors.
With more implementation work, such mistakes could probably be caught,
but in a networked environment, with machines sharing a remote file server, renamings
and deletions made by one machine may go unnoticed by others.
These problems, however, are minor, uncommon and, most important, easy to understand.
The method maintains the lexical property of file names unless an external
agent changes the name surreptitiously;
within a stable file system, it is always maintained and
.CW pwd
is always right.
.LP
To recapitulate, maintaining the
.CW Channel 's
absolute file names lexically and using the names to disambiguate the
mount table entries when evaluating
.CW ..
at a mount point
combine to maintain the lexical definition of
.CW ..
efficiently.
.SH
Cleaning names
.LP
The lexical processing can generate names that are messy or redundant,
ones with extra slashes or embedded
.CW ../
or
.CW ./
elements and other extraneous artifacts.
As part of the kernel's implementation, we wrote a procedure,
.CW cleanname ,
that rewrites a name in place to canonicalize its appearance.
The procedure is useful enough that it is now part of the Plan 9 C
library and is employed by many programs to make sure they always
present clean file names.
.LP
.CW Cleanname
is analogous to the URL-cleaning rules defined in RFC 1808 [Field95], although
the rules are slightly different.
.CW Cleanname
iteratively does the following until no further processing can be done:
.IP
1. Reduce multiple slashes to a single slash.
.IP
2. Eliminate
.CW .
path name elements
(the current directory).
.IP
3. Eliminate
.CW ..
path name elements (the parent directory) and the
.CW . "" non-
.CW .., "" non-
element that precedes them.
.IP
4. Eliminate
.CW ..
elements that begin a rooted path, that is, replace
.CW /..
by
.CW /
at the beginning of a path.
.IP
5. Leave intact
.CW ..
elements that begin a non-rooted path.
.LP
If the result of this process is a null string,
.CW cleanname
returns the string
.CW \&"." ,
representing the current directory.
.SH
The fd2path system call
.LP
Plan 9 has a new system call,
.CW fd2path ,
to enable programs to extract the
.CW Cname
associated with an open file descriptor.
It takes three arguments: a file descriptor, a buffer, and the size of the buffer:
.P1
int fd2path(int fd, char *buf, int nbuf)
.P2
It returns an error if the file descriptor is invalid; otherwise it fills the buffer with the name
associated with
.CW fd .
(If the name is too long, it is truncated; perhaps this condition should also draw an error.)
The
.CW fd2path
system call is very cheap, since all it does is copy the
.CW Cname
string to user space.
.LP
The Plan 9 implementation of
.CW getwd
uses
.CW fd2path
rather than the tricky algorithm necessary in Unix:
.P1
char*
getwd(char *buf, int nbuf)
{
int n, fd;
fd = open(".", OREAD);
if(fd < 0)
return NULL;
n = fd2path(fd, buf, nbuf);
close(fd);
if(n < 0)
return NULL;
return buf;
}
.P2
(The Unix specification of
.CW getwd
does not include a count argument.)
This version of
.CW getwd
is not only straightforward, it is very efficient, reducing the performance
advantage of a built-in
.CW pwd
command while guaranteeing that all commands, not just
.CW pwd ,
see sensible directory names.
.LP
Here is a routine that prints the file name associated
with each of its open file descriptors; it is useful for tracking down file descriptors
left open by network listeners, text editors that spawn commands, and the like:
.P1
void
openfiles(void)
{
int i;
char buf[256];
for(i=0; i<NFD; i++)
if(fd2path(i, buf, sizeof buf) >= 0)
print("%d: %s\en", i, buf);
}
.P2
.SH
Uses of good names
.LP
Although
.CW pwd
was the motivation for getting names right, good file names are useful in many contexts
and have become a key part of the Plan 9 programming environment.
The compilers record in the symbol table the full name of the source file, which makes
it easy to track down the source of buggy, old software and also permits the
implementation of a program,
.CW src ,
to automate tracking it down.
Given the name of a program,
.CW src
reads its symbol table, extracts the file information,
and triggers the editor to open a window on the program's
source for its
.CW main
routine.
No guesswork, no heuristics.
.LP
The
.CW openfiles
routine was the inspiration for a new file in the
.CW /proc
file system [Kill84].
For process
.I n ,
the file
.CW /proc/\f2n\fP/fd
is a list of all its open files, including its working directory,
with associated information including its open status,
I/O offset, unique id (analogous to i-number)
and file name.
Here is the contents of the
.CW fd
file for a process in the window system on the machine being used to write this paper:
.P1
% cat /proc/125099/fd
/usr/rob
0 r M 5141 00000001.00000000 0 /mnt/term/dev/cons
1 w M 5141 00000001.00000000 51 /mnt/term/dev/cons
2 w M 5141 00000001.00000000 51 /mnt/term/dev/cons
3 r M 5141 0000000b.00000000 1166 /dev/snarf
4 rw M 5141 0ffffffc.00000000 288 /dev/draw/new
5 rw M 5141 00000036.00000000 4266337 /dev/draw/3/data
6 r M 5141 00000037.00000000 0 /dev/draw/3/refresh
7 r c 0 00000004.00000000 6199848 /dev/bintime
%
.P2
(The Linux implementation of
.CW /proc
provides a related service by giving a directory in which each file-descriptor-numbered file is
a symbolic link to the file itself.)
When debugging errant systems software, such information can be valuable.
.LP
Another motivation for getting names right was the need to extract from the system
an accurate description of the mount table, so that a process's name space could be
recreated on another machine, in order to move (or simulate) a computing environment
across the network.
One program that does this is Plan 9's
.CW cpu
command, which recreates the local name space on a remote machine, typically a large
fast multiprocessor.
Without accurate names, it was impossible to do the job right; now
.CW /proc
provides a description of the name space of each process,
.CW /proc/\f2n\fP/ns :
.P1
% cat /proc/125099/ns
bind / /
mount -aC #s/boot /
bind #c /dev
bind #d /fd
bind -c #e /env
bind #p /proc
bind -c #s /srv
bind /386/bin /bin
bind -a /rc/bin /bin
bind /net /net
bind -a #l /net
mount -a #s/cs /net
mount -a #s/dns /net
bind -a #D /net
mount -c #s/boot /n/emelie
bind -c /n/emelie/mail /mail
mount -c /net/il/134/data /mnt/term
bind -a /usr/rob/bin/rc /bin
bind -a /usr/rob/bin/386 /bin
mount #s/boot /n/emelieother other
bind -c /n/emelieother/rob /tmp
mount #s/boot /n/dump dump
bind /mnt/term/dev/cons /dev/cons
\&...
cd /usr/rob
%
.P2
(The
.CW #
notation identifies raw device drivers so they may be attached to the name space.)
The last line of the file gives the working directory of the process.
The format of this file is that used by a library routine,
.CW newns ,
which reads a textual description like this and reconstructs a name space.
Except for the need to quote
.CW #
characters, the output is also a shell script that invokes the user-level commands
.CW bind
and
.CW mount ,
which are just interfaces to the underlying system calls.
However,
files like
.CW /net/il/134/data
represent network connections; to find out where they point, so that the corresponding
calls can be reestablished for another process,
they must be examined in more detail using the network device files [PrWi93]. Another program,
.CW ns ,
does this; it reads the
.CW /proc/\f2n\fP/ns
file, decodes the information, and interprets it, translating the network
addresses and quoting the names when required:
.P1
\&...
mount -a '#s/dns' /net
\&...
mount -c il!135.104.3.100!12884 /mnt/term
\&...
.P2
These tools make it possible to capture an accurate description of a process's
name space and recreate it elsewhere.
And like the open file descriptor table,
they are a boon to debugging; it is always helpful to know
exactly what resources a program is using.
.SH
Adapting to Unix
.LP
This work was done for the Plan 9 operating system, which has the advantage that
the non-hierarchical aspects of the name space are all known to the kernel.
It should be possible, though, to adapt it to a Unix system.
The problem is that Unix has nothing corresponding precisely to a
.CW Channel ,
which in Plan 9 represents the unique result of evaluating a name.
The
.CW vnode
structure is a shared structure that may represent a file
known by several names, while the
.CW file
structure refers only to open files, but for example the current working
directory of a process is not open.
Possibilities to address this discrepancy include
introducing a
.CW Channel -like
structure that connects a name and a
.CW vnode ,
or maintaining a separate per-process table that maps names to
.CW vnodes ,
disambiguating using the techniques described here.
If it could be done
the result would be an implementation of
.CW ..
that reduces the need for a built-in
.CW pwd
in the shell and offers a consistent, sensible interpretation of the `parent directory'.
.LP
We have not done this adaptation, but we recommend that the Unix community try it.
.SH
Conclusions
.LP
It should be easy to discover a well-defined, absolute path name for every open file and
directory in the system, even in the face of symbolic links and other non-hierarchical
elements of the file name space.
In earlier versions of Plan 9, and all current versions of Unix,
names can instead be inconsistent and confusing.
.LP
The Plan 9 operating system now maintains an accurate name for each file,
using inexpensive lexical operations coupled with local file system actions.
Ambiguities are resolved by examining the names themselves;
since they reflect the path that was used to reach the file, they also reflect the path back,
permitting a dependable answer to be recovered even when stepping backwards through
a multiply-named directory.
.LP
Names make sense again: they are sensible and consistent.
Now that dependable names are available, system services can depend on them,
and recent work in Plan 9 is doing just that.
We\(emthe community of Unix and Unix-like systems\(emshould have done this work a long time ago.
.SH
Acknowledgements
.LP
Phil Winterbottom devised the
.CW ns
command and the
.CW fd
and
.CW ns
files in
.CW /proc ,
based on an earlier implementation of path name management that
the work in this paper replaces.
Russ Cox wrote the final version of
.CW cleanname
and helped debug the code for reversing the mount table.
Ken Thompson, Dave Presotto, and Jim McKie offered encouragement and consultation.
.SH
References
.LP
[Field95]
R. Fielding,
``Relative Uniform Resource Locators'',
.I "Network Working Group Request for Comments: 1808" ,
June, 1995.
.LP
[Kill84]
T. J. Killian,
``Processes as Files'',
.I "Proceedings of the Summer 1984 USENIX Conference" ,
Salt Lake City, 1984, pp. 203-207.
.LP
[Korn94]
David G. Korn,
``ksh: An Extensible High Level Language'',
.I "Proceedings of the USENIX Very High Level Languages Symposium" ,
Santa Fe, 1994, pp. 129-146.
.LP
[Korn00]
David G. Korn,
personal communication.
.LP
[PeMc95]
Jan-Simon Pendry and Marshall Kirk McKusick,
``Union Mounts in 4.4BSD-Lite'',
.I "Proceedings of the 1995 USENIX Conference" ,
New Orleans, 1995.
.LP
[Pike91]
Rob Pike,
``8½, the Plan 9 Window System'',
.I "Proceedings of the Summer 1991 USENIX Conference" ,
Nashville, 1991, pp. 257-265.
.LP
[Pike93]
Rob Pike, Dave Presotto, Ken Thompson, Howard Trickey, and Phil Winterbottom,
``The Use of Name Spaces in Plan 9'',
.I "Operating Systems Review" ,
.B 27 ,
2, April 1993, pp. 72-76.
.LP
[PrWi93]
Dave Presotto and Phil Winterbottom,
``The Organization of Networks in Plan 9'',
.I "Proceedings of the Winter 1993 USENIX Conference" ,
San Diego, 1993, pp. 43-50.