ref: f4f19cdf1a8f0d2aa5f9fce10c896201528b5347
dir: /sys/src/cmd/audio/libvorbis/mapping0.c/
/********************************************************************
* *
* THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE. *
* USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS *
* GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE *
* IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING. *
* *
* THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2010 *
* by the Xiph.Org Foundation http://www.xiph.org/ *
* *
********************************************************************
function: channel mapping 0 implementation
last mod: $Id: mapping0.c 19441 2015-01-21 01:17:41Z xiphmont $
********************************************************************/
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <math.h>
#include <ogg/ogg.h>
#include "vorbis/codec.h"
#include "codec_internal.h"
#include "codebook.h"
#include "window.h"
#include "registry.h"
#include "psy.h"
#include "misc.h"
/* simplistic, wasteful way of doing this (unique lookup for each
mode/submapping); there should be a central repository for
identical lookups. That will require minor work, so I'm putting it
off as low priority.
Why a lookup for each backend in a given mode? Because the
blocksize is set by the mode, and low backend lookups may require
parameters from other areas of the mode/mapping */
static void mapping0_free_info(vorbis_info_mapping *i){
vorbis_info_mapping0 *info=(vorbis_info_mapping0 *)i;
if(info){
memset(info,0,sizeof(*info));
_ogg_free(info);
}
}
static void mapping0_pack(vorbis_info *vi,vorbis_info_mapping *vm,
oggpack_buffer *opb){
int i;
vorbis_info_mapping0 *info=(vorbis_info_mapping0 *)vm;
/* another 'we meant to do it this way' hack... up to beta 4, we
packed 4 binary zeros here to signify one submapping in use. We
now redefine that to mean four bitflags that indicate use of
deeper features; bit0:submappings, bit1:coupling,
bit2,3:reserved. This is backward compatable with all actual uses
of the beta code. */
if(info->submaps>1){
oggpack_write(opb,1,1);
oggpack_write(opb,info->submaps-1,4);
}else
oggpack_write(opb,0,1);
if(info->coupling_steps>0){
oggpack_write(opb,1,1);
oggpack_write(opb,info->coupling_steps-1,8);
for(i=0;i<info->coupling_steps;i++){
oggpack_write(opb,info->coupling_mag[i],ov_ilog(vi->channels-1));
oggpack_write(opb,info->coupling_ang[i],ov_ilog(vi->channels-1));
}
}else
oggpack_write(opb,0,1);
oggpack_write(opb,0,2); /* 2,3:reserved */
/* we don't write the channel submappings if we only have one... */
if(info->submaps>1){
for(i=0;i<vi->channels;i++)
oggpack_write(opb,info->chmuxlist[i],4);
}
for(i=0;i<info->submaps;i++){
oggpack_write(opb,0,8); /* time submap unused */
oggpack_write(opb,info->floorsubmap[i],8);
oggpack_write(opb,info->residuesubmap[i],8);
}
}
/* also responsible for range checking */
static vorbis_info_mapping *mapping0_unpack(vorbis_info *vi,oggpack_buffer *opb){
int i,b;
vorbis_info_mapping0 *info=_ogg_calloc(1,sizeof(*info));
codec_setup_info *ci=vi->codec_setup;
memset(info,0,sizeof(*info));
if(vi->channels<=0)goto err_out;
b=oggpack_read(opb,1);
if(b<0)goto err_out;
if(b){
info->submaps=oggpack_read(opb,4)+1;
if(info->submaps<=0)goto err_out;
}else
info->submaps=1;
b=oggpack_read(opb,1);
if(b<0)goto err_out;
if(b){
info->coupling_steps=oggpack_read(opb,8)+1;
if(info->coupling_steps<=0)goto err_out;
for(i=0;i<info->coupling_steps;i++){
/* vi->channels > 0 is enforced in the caller */
int testM=info->coupling_mag[i]=
oggpack_read(opb,ov_ilog(vi->channels-1));
int testA=info->coupling_ang[i]=
oggpack_read(opb,ov_ilog(vi->channels-1));
if(testM<0 ||
testA<0 ||
testM==testA ||
testM>=vi->channels ||
testA>=vi->channels) goto err_out;
}
}
if(oggpack_read(opb,2)!=0)goto err_out; /* 2,3:reserved */
if(info->submaps>1){
for(i=0;i<vi->channels;i++){
info->chmuxlist[i]=oggpack_read(opb,4);
if(info->chmuxlist[i]>=info->submaps || info->chmuxlist[i]<0)goto err_out;
}
}
for(i=0;i<info->submaps;i++){
oggpack_read(opb,8); /* time submap unused */
info->floorsubmap[i]=oggpack_read(opb,8);
if(info->floorsubmap[i]>=ci->floors || info->floorsubmap[i]<0)goto err_out;
info->residuesubmap[i]=oggpack_read(opb,8);
if(info->residuesubmap[i]>=ci->residues || info->residuesubmap[i]<0)goto err_out;
}
return info;
err_out:
mapping0_free_info(info);
return(NULL);
}
#include "os.h"
#include "lpc.h"
#include "lsp.h"
#include "envelope.h"
#include "mdct.h"
#include "psy.h"
#include "scales.h"
#if 0
static long seq=0;
static ogg_int64_t total=0;
static float FLOOR1_fromdB_LOOKUP[256]={
1.0649863e-07F, 1.1341951e-07F, 1.2079015e-07F, 1.2863978e-07F,
1.3699951e-07F, 1.4590251e-07F, 1.5538408e-07F, 1.6548181e-07F,
1.7623575e-07F, 1.8768855e-07F, 1.9988561e-07F, 2.128753e-07F,
2.2670913e-07F, 2.4144197e-07F, 2.5713223e-07F, 2.7384213e-07F,
2.9163793e-07F, 3.1059021e-07F, 3.3077411e-07F, 3.5226968e-07F,
3.7516214e-07F, 3.9954229e-07F, 4.2550680e-07F, 4.5315863e-07F,
4.8260743e-07F, 5.1396998e-07F, 5.4737065e-07F, 5.8294187e-07F,
6.2082472e-07F, 6.6116941e-07F, 7.0413592e-07F, 7.4989464e-07F,
7.9862701e-07F, 8.5052630e-07F, 9.0579828e-07F, 9.6466216e-07F,
1.0273513e-06F, 1.0941144e-06F, 1.1652161e-06F, 1.2409384e-06F,
1.3215816e-06F, 1.4074654e-06F, 1.4989305e-06F, 1.5963394e-06F,
1.7000785e-06F, 1.8105592e-06F, 1.9282195e-06F, 2.0535261e-06F,
2.1869758e-06F, 2.3290978e-06F, 2.4804557e-06F, 2.6416497e-06F,
2.8133190e-06F, 2.9961443e-06F, 3.1908506e-06F, 3.3982101e-06F,
3.6190449e-06F, 3.8542308e-06F, 4.1047004e-06F, 4.3714470e-06F,
4.6555282e-06F, 4.9580707e-06F, 5.2802740e-06F, 5.6234160e-06F,
5.9888572e-06F, 6.3780469e-06F, 6.7925283e-06F, 7.2339451e-06F,
7.7040476e-06F, 8.2047000e-06F, 8.7378876e-06F, 9.3057248e-06F,
9.9104632e-06F, 1.0554501e-05F, 1.1240392e-05F, 1.1970856e-05F,
1.2748789e-05F, 1.3577278e-05F, 1.4459606e-05F, 1.5399272e-05F,
1.6400004e-05F, 1.7465768e-05F, 1.8600792e-05F, 1.9809576e-05F,
2.1096914e-05F, 2.2467911e-05F, 2.3928002e-05F, 2.5482978e-05F,
2.7139006e-05F, 2.8902651e-05F, 3.0780908e-05F, 3.2781225e-05F,
3.4911534e-05F, 3.7180282e-05F, 3.9596466e-05F, 4.2169667e-05F,
4.4910090e-05F, 4.7828601e-05F, 5.0936773e-05F, 5.4246931e-05F,
5.7772202e-05F, 6.1526565e-05F, 6.5524908e-05F, 6.9783085e-05F,
7.4317983e-05F, 7.9147585e-05F, 8.4291040e-05F, 8.9768747e-05F,
9.5602426e-05F, 0.00010181521F, 0.00010843174F, 0.00011547824F,
0.00012298267F, 0.00013097477F, 0.00013948625F, 0.00014855085F,
0.00015820453F, 0.00016848555F, 0.00017943469F, 0.00019109536F,
0.00020351382F, 0.00021673929F, 0.00023082423F, 0.00024582449F,
0.00026179955F, 0.00027881276F, 0.00029693158F, 0.00031622787F,
0.00033677814F, 0.00035866388F, 0.00038197188F, 0.00040679456F,
0.00043323036F, 0.00046138411F, 0.00049136745F, 0.00052329927F,
0.00055730621F, 0.00059352311F, 0.00063209358F, 0.00067317058F,
0.00071691700F, 0.00076350630F, 0.00081312324F, 0.00086596457F,
0.00092223983F, 0.00098217216F, 0.0010459992F, 0.0011139742F,
0.0011863665F, 0.0012634633F, 0.0013455702F, 0.0014330129F,
0.0015261382F, 0.0016253153F, 0.0017309374F, 0.0018434235F,
0.0019632195F, 0.0020908006F, 0.0022266726F, 0.0023713743F,
0.0025254795F, 0.0026895994F, 0.0028643847F, 0.0030505286F,
0.0032487691F, 0.0034598925F, 0.0036847358F, 0.0039241906F,
0.0041792066F, 0.0044507950F, 0.0047400328F, 0.0050480668F,
0.0053761186F, 0.0057254891F, 0.0060975636F, 0.0064938176F,
0.0069158225F, 0.0073652516F, 0.0078438871F, 0.0083536271F,
0.0088964928F, 0.009474637F, 0.010090352F, 0.010746080F,
0.011444421F, 0.012188144F, 0.012980198F, 0.013823725F,
0.014722068F, 0.015678791F, 0.016697687F, 0.017782797F,
0.018938423F, 0.020169149F, 0.021479854F, 0.022875735F,
0.024362330F, 0.025945531F, 0.027631618F, 0.029427276F,
0.031339626F, 0.033376252F, 0.035545228F, 0.037855157F,
0.040315199F, 0.042935108F, 0.045725273F, 0.048696758F,
0.051861348F, 0.055231591F, 0.058820850F, 0.062643361F,
0.066714279F, 0.071049749F, 0.075666962F, 0.080584227F,
0.085821044F, 0.091398179F, 0.097337747F, 0.10366330F,
0.11039993F, 0.11757434F, 0.12521498F, 0.13335215F,
0.14201813F, 0.15124727F, 0.16107617F, 0.17154380F,
0.18269168F, 0.19456402F, 0.20720788F, 0.22067342F,
0.23501402F, 0.25028656F, 0.26655159F, 0.28387361F,
0.30232132F, 0.32196786F, 0.34289114F, 0.36517414F,
0.38890521F, 0.41417847F, 0.44109412F, 0.46975890F,
0.50028648F, 0.53279791F, 0.56742212F, 0.60429640F,
0.64356699F, 0.68538959F, 0.72993007F, 0.77736504F,
0.82788260F, 0.88168307F, 0.9389798F, 1.F,
};
#endif
static int mapping0_forward(vorbis_block *vb){
vorbis_dsp_state *vd=vb->vd;
vorbis_info *vi=vd->vi;
codec_setup_info *ci=vi->codec_setup;
private_state *b=vb->vd->backend_state;
vorbis_block_internal *vbi=(vorbis_block_internal *)vb->internal;
int n=vb->pcmend;
int i,j,k;
int *nonzero = malloc(sizeof(*nonzero)*vi->channels);
float **gmdct = _vorbis_block_alloc(vb,vi->channels*sizeof(*gmdct));
int **iwork = _vorbis_block_alloc(vb,vi->channels*sizeof(*iwork));
int ***floor_posts = _vorbis_block_alloc(vb,vi->channels*sizeof(*floor_posts));
float global_ampmax=vbi->ampmax;
float *local_ampmax=malloc(sizeof(*local_ampmax)*vi->channels);
int blocktype=vbi->blocktype;
int modenumber=vb->W;
vorbis_info_mapping0 *info=ci->map_param[modenumber];
vorbis_look_psy *psy_look=b->psy+blocktype+(vb->W?2:0);
vb->mode=modenumber;
for(i=0;i<vi->channels;i++){
float scale=4.f/n;
float scale_dB;
float *pcm =vb->pcm[i];
float *logfft =pcm;
iwork[i]=_vorbis_block_alloc(vb,n/2*sizeof(**iwork));
gmdct[i]=_vorbis_block_alloc(vb,n/2*sizeof(**gmdct));
scale_dB=todB(&scale) + .345; /* + .345 is a hack; the original
todB estimation used on IEEE 754
compliant machines had a bug that
returned dB values about a third
of a decibel too high. The bug
was harmless because tunings
implicitly took that into
account. However, fixing the bug
in the estimator requires
changing all the tunings as well.
For now, it's easier to sync
things back up here, and
recalibrate the tunings in the
next major model upgrade. */
#if 0
if(vi->channels==2){
if(i==0)
_analysis_output("pcmL",seq,pcm,n,0,0,total-n/2);
else
_analysis_output("pcmR",seq,pcm,n,0,0,total-n/2);
}else{
_analysis_output("pcm",seq,pcm,n,0,0,total-n/2);
}
#endif
/* window the PCM data */
_vorbis_apply_window(pcm,b->window,ci->blocksizes,vb->lW,vb->W,vb->nW);
#if 0
if(vi->channels==2){
if(i==0)
_analysis_output("windowedL",seq,pcm,n,0,0,total-n/2);
else
_analysis_output("windowedR",seq,pcm,n,0,0,total-n/2);
}else{
_analysis_output("windowed",seq,pcm,n,0,0,total-n/2);
}
#endif
/* transform the PCM data */
/* only MDCT right now.... */
mdct_forward(b->transform[vb->W][0],pcm,gmdct[i]);
/* FFT yields more accurate tonal estimation (not phase sensitive) */
drft_forward(&b->fft_look[vb->W],pcm);
logfft[0]=scale_dB+todB(pcm) + .345; /* + .345 is a hack; the
original todB estimation used on
IEEE 754 compliant machines had a
bug that returned dB values about
a third of a decibel too high.
The bug was harmless because
tunings implicitly took that into
account. However, fixing the bug
in the estimator requires
changing all the tunings as well.
For now, it's easier to sync
things back up here, and
recalibrate the tunings in the
next major model upgrade. */
local_ampmax[i]=logfft[0];
for(j=1;j<n-1;j+=2){
float temp=pcm[j]*pcm[j]+pcm[j+1]*pcm[j+1];
temp=logfft[(j+1)>>1]=scale_dB+.5f*todB(&temp) + .345; /* +
.345 is a hack; the original todB
estimation used on IEEE 754
compliant machines had a bug that
returned dB values about a third
of a decibel too high. The bug
was harmless because tunings
implicitly took that into
account. However, fixing the bug
in the estimator requires
changing all the tunings as well.
For now, it's easier to sync
things back up here, and
recalibrate the tunings in the
next major model upgrade. */
if(temp>local_ampmax[i])local_ampmax[i]=temp;
}
if(local_ampmax[i]>0.f)local_ampmax[i]=0.f;
if(local_ampmax[i]>global_ampmax)global_ampmax=local_ampmax[i];
#if 0
if(vi->channels==2){
if(i==0){
_analysis_output("fftL",seq,logfft,n/2,1,0,0);
}else{
_analysis_output("fftR",seq,logfft,n/2,1,0,0);
}
}else{
_analysis_output("fft",seq,logfft,n/2,1,0,0);
}
#endif
}
{
float *noise = _vorbis_block_alloc(vb,n/2*sizeof(*noise));
float *tone = _vorbis_block_alloc(vb,n/2*sizeof(*tone));
for(i=0;i<vi->channels;i++){
/* the encoder setup assumes that all the modes used by any
specific bitrate tweaking use the same floor */
int submap=info->chmuxlist[i];
/* the following makes things clearer to *me* anyway */
float *mdct =gmdct[i];
float *logfft =vb->pcm[i];
float *logmdct =logfft+n/2;
float *logmask =logfft;
vb->mode=modenumber;
floor_posts[i]=_vorbis_block_alloc(vb,PACKETBLOBS*sizeof(**floor_posts));
memset(floor_posts[i],0,sizeof(**floor_posts)*PACKETBLOBS);
for(j=0;j<n/2;j++)
logmdct[j]=todB(mdct+j) + .345; /* + .345 is a hack; the original
todB estimation used on IEEE 754
compliant machines had a bug that
returned dB values about a third
of a decibel too high. The bug
was harmless because tunings
implicitly took that into
account. However, fixing the bug
in the estimator requires
changing all the tunings as well.
For now, it's easier to sync
things back up here, and
recalibrate the tunings in the
next major model upgrade. */
#if 0
if(vi->channels==2){
if(i==0)
_analysis_output("mdctL",seq,logmdct,n/2,1,0,0);
else
_analysis_output("mdctR",seq,logmdct,n/2,1,0,0);
}else{
_analysis_output("mdct",seq,logmdct,n/2,1,0,0);
}
#endif
/* first step; noise masking. Not only does 'noise masking'
give us curves from which we can decide how much resolution
to give noise parts of the spectrum, it also implicitly hands
us a tonality estimate (the larger the value in the
'noise_depth' vector, the more tonal that area is) */
_vp_noisemask(psy_look,
logmdct,
noise); /* noise does not have by-frequency offset
bias applied yet */
#if 0
if(vi->channels==2){
if(i==0)
_analysis_output("noiseL",seq,noise,n/2,1,0,0);
else
_analysis_output("noiseR",seq,noise,n/2,1,0,0);
}else{
_analysis_output("noise",seq,noise,n/2,1,0,0);
}
#endif
/* second step: 'all the other crap'; all the stuff that isn't
computed/fit for bitrate management goes in the second psy
vector. This includes tone masking, peak limiting and ATH */
_vp_tonemask(psy_look,
logfft,
tone,
global_ampmax,
local_ampmax[i]);
#if 0
if(vi->channels==2){
if(i==0)
_analysis_output("toneL",seq,tone,n/2,1,0,0);
else
_analysis_output("toneR",seq,tone,n/2,1,0,0);
}else{
_analysis_output("tone",seq,tone,n/2,1,0,0);
}
#endif
/* third step; we offset the noise vectors, overlay tone
masking. We then do a floor1-specific line fit. If we're
performing bitrate management, the line fit is performed
multiple times for up/down tweakage on demand. */
#if 0
{
float aotuv[psy_look->n];
#endif
_vp_offset_and_mix(psy_look,
noise,
tone,
1,
logmask,
mdct,
logmdct);
#if 0
if(vi->channels==2){
if(i==0)
_analysis_output("aotuvM1_L",seq,aotuv,psy_look->n,1,1,0);
else
_analysis_output("aotuvM1_R",seq,aotuv,psy_look->n,1,1,0);
}else{
_analysis_output("aotuvM1",seq,aotuv,psy_look->n,1,1,0);
}
}
#endif
#if 0
if(vi->channels==2){
if(i==0)
_analysis_output("mask1L",seq,logmask,n/2,1,0,0);
else
_analysis_output("mask1R",seq,logmask,n/2,1,0,0);
}else{
_analysis_output("mask1",seq,logmask,n/2,1,0,0);
}
#endif
/* this algorithm is hardwired to floor 1 for now; abort out if
we're *not* floor1. This won't happen unless someone has
broken the encode setup lib. Guard it anyway. */
if(ci->floor_type[info->floorsubmap[submap]]!=1){
free(nonzero);
free(local_ampmax);
return(-1);
}
floor_posts[i][PACKETBLOBS/2]=
floor1_fit(vb,b->flr[info->floorsubmap[submap]],
logmdct,
logmask);
/* are we managing bitrate? If so, perform two more fits for
later rate tweaking (fits represent hi/lo) */
if(vorbis_bitrate_managed(vb) && floor_posts[i][PACKETBLOBS/2]){
/* higher rate by way of lower noise curve */
_vp_offset_and_mix(psy_look,
noise,
tone,
2,
logmask,
mdct,
logmdct);
#if 0
if(vi->channels==2){
if(i==0)
_analysis_output("mask2L",seq,logmask,n/2,1,0,0);
else
_analysis_output("mask2R",seq,logmask,n/2,1,0,0);
}else{
_analysis_output("mask2",seq,logmask,n/2,1,0,0);
}
#endif
floor_posts[i][PACKETBLOBS-1]=
floor1_fit(vb,b->flr[info->floorsubmap[submap]],
logmdct,
logmask);
/* lower rate by way of higher noise curve */
_vp_offset_and_mix(psy_look,
noise,
tone,
0,
logmask,
mdct,
logmdct);
#if 0
if(vi->channels==2){
if(i==0)
_analysis_output("mask0L",seq,logmask,n/2,1,0,0);
else
_analysis_output("mask0R",seq,logmask,n/2,1,0,0);
}else{
_analysis_output("mask0",seq,logmask,n/2,1,0,0);
}
#endif
floor_posts[i][0]=
floor1_fit(vb,b->flr[info->floorsubmap[submap]],
logmdct,
logmask);
/* we also interpolate a range of intermediate curves for
intermediate rates */
for(k=1;k<PACKETBLOBS/2;k++)
floor_posts[i][k]=
floor1_interpolate_fit(vb,b->flr[info->floorsubmap[submap]],
floor_posts[i][0],
floor_posts[i][PACKETBLOBS/2],
k*65536/(PACKETBLOBS/2));
for(k=PACKETBLOBS/2+1;k<PACKETBLOBS-1;k++)
floor_posts[i][k]=
floor1_interpolate_fit(vb,b->flr[info->floorsubmap[submap]],
floor_posts[i][PACKETBLOBS/2],
floor_posts[i][PACKETBLOBS-1],
(k-PACKETBLOBS/2)*65536/(PACKETBLOBS/2));
}
}
}
vbi->ampmax=global_ampmax;
/*
the next phases are performed once for vbr-only and PACKETBLOB
times for bitrate managed modes.
1) encode actual mode being used
2) encode the floor for each channel, compute coded mask curve/res
3) normalize and couple.
4) encode residue
5) save packet bytes to the packetblob vector
*/
/* iterate over the many masking curve fits we've created */
{
int **couple_bundle=malloc(sizeof(*couple_bundle)*vi->channels);
int *zerobundle=malloc(sizeof(*zerobundle)*vi->channels);
for(k=(vorbis_bitrate_managed(vb)?0:PACKETBLOBS/2);
k<=(vorbis_bitrate_managed(vb)?PACKETBLOBS-1:PACKETBLOBS/2);
k++){
oggpack_buffer *opb=vbi->packetblob[k];
/* start out our new packet blob with packet type and mode */
/* Encode the packet type */
oggpack_write(opb,0,1);
/* Encode the modenumber */
/* Encode frame mode, pre,post windowsize, then dispatch */
oggpack_write(opb,modenumber,b->modebits);
if(vb->W){
oggpack_write(opb,vb->lW,1);
oggpack_write(opb,vb->nW,1);
}
/* encode floor, compute masking curve, sep out residue */
for(i=0;i<vi->channels;i++){
int submap=info->chmuxlist[i];
int *ilogmask=iwork[i];
nonzero[i]=floor1_encode(opb,vb,b->flr[info->floorsubmap[submap]],
floor_posts[i][k],
ilogmask);
#if 0
{
char buf[80];
sprintf(buf,"maskI%c%d",i?'R':'L',k);
float work[n/2];
for(j=0;j<n/2;j++)
work[j]=FLOOR1_fromdB_LOOKUP[iwork[i][j]];
_analysis_output(buf,seq,work,n/2,1,1,0);
}
#endif
}
/* our iteration is now based on masking curve, not prequant and
coupling. Only one prequant/coupling step */
/* quantize/couple */
/* incomplete implementation that assumes the tree is all depth
one, or no tree at all */
_vp_couple_quantize_normalize(k,
&ci->psy_g_param,
psy_look,
info,
gmdct,
iwork,
nonzero,
ci->psy_g_param.sliding_lowpass[vb->W][k],
vi->channels);
#if 0
for(i=0;i<vi->channels;i++){
char buf[80];
sprintf(buf,"res%c%d",i?'R':'L',k);
float work[n/2];
for(j=0;j<n/2;j++)
work[j]=iwork[i][j];
_analysis_output(buf,seq,work,n/2,1,0,0);
}
#endif
/* classify and encode by submap */
for(i=0;i<info->submaps;i++){
int ch_in_bundle=0;
long **classifications;
int resnum=info->residuesubmap[i];
for(j=0;j<vi->channels;j++){
if(info->chmuxlist[j]==i){
zerobundle[ch_in_bundle]=0;
if(nonzero[j])zerobundle[ch_in_bundle]=1;
couple_bundle[ch_in_bundle++]=iwork[j];
}
}
classifications=_residue_P[ci->residue_type[resnum]]->
class(vb,b->residue[resnum],couple_bundle,zerobundle,ch_in_bundle);
ch_in_bundle=0;
for(j=0;j<vi->channels;j++)
if(info->chmuxlist[j]==i)
couple_bundle[ch_in_bundle++]=iwork[j];
_residue_P[ci->residue_type[resnum]]->
forward(opb,vb,b->residue[resnum],
couple_bundle,zerobundle,ch_in_bundle,classifications,i);
}
/* ok, done encoding. Next protopacket. */
}
free(couple_bundle);
free(zerobundle);
}
#if 0
seq++;
total+=ci->blocksizes[vb->W]/4+ci->blocksizes[vb->nW]/4;
#endif
free(nonzero);
free(local_ampmax);
return(0);
}
static int mapping0_inverse(vorbis_block *vb,vorbis_info_mapping *l){
vorbis_dsp_state *vd=vb->vd;
vorbis_info *vi=vd->vi;
codec_setup_info *ci=vi->codec_setup;
private_state *b=vd->backend_state;
vorbis_info_mapping0 *info=(vorbis_info_mapping0 *)l;
int i,j;
long n=vb->pcmend=ci->blocksizes[vb->W];
float **pcmbundle=malloc(sizeof(*pcmbundle)*vi->channels);
int *zerobundle=malloc(sizeof(*zerobundle)*vi->channels);
int *nonzero =malloc(sizeof(*nonzero)*vi->channels);
void **floormemo=malloc(sizeof(*floormemo)*vi->channels);
/* recover the spectral envelope; store it in the PCM vector for now */
for(i=0;i<vi->channels;i++){
int submap=info->chmuxlist[i];
floormemo[i]=_floor_P[ci->floor_type[info->floorsubmap[submap]]]->
inverse1(vb,b->flr[info->floorsubmap[submap]]);
if(floormemo[i])
nonzero[i]=1;
else
nonzero[i]=0;
memset(vb->pcm[i],0,sizeof(*vb->pcm[i])*n/2);
}
/* channel coupling can 'dirty' the nonzero listing */
for(i=0;i<info->coupling_steps;i++){
if(nonzero[info->coupling_mag[i]] ||
nonzero[info->coupling_ang[i]]){
nonzero[info->coupling_mag[i]]=1;
nonzero[info->coupling_ang[i]]=1;
}
}
/* recover the residue into our working vectors */
for(i=0;i<info->submaps;i++){
int ch_in_bundle=0;
for(j=0;j<vi->channels;j++){
if(info->chmuxlist[j]==i){
if(nonzero[j])
zerobundle[ch_in_bundle]=1;
else
zerobundle[ch_in_bundle]=0;
pcmbundle[ch_in_bundle++]=vb->pcm[j];
}
}
_residue_P[ci->residue_type[info->residuesubmap[i]]]->
inverse(vb,b->residue[info->residuesubmap[i]],
pcmbundle,zerobundle,ch_in_bundle);
}
/* channel coupling */
for(i=info->coupling_steps-1;i>=0;i--){
float *pcmM=vb->pcm[info->coupling_mag[i]];
float *pcmA=vb->pcm[info->coupling_ang[i]];
for(j=0;j<n/2;j++){
float mag=pcmM[j];
float ang=pcmA[j];
if(mag>0)
if(ang>0){
pcmM[j]=mag;
pcmA[j]=mag-ang;
}else{
pcmA[j]=mag;
pcmM[j]=mag+ang;
}
else
if(ang>0){
pcmM[j]=mag;
pcmA[j]=mag+ang;
}else{
pcmA[j]=mag;
pcmM[j]=mag-ang;
}
}
}
/* compute and apply spectral envelope */
for(i=0;i<vi->channels;i++){
float *pcm=vb->pcm[i];
int submap=info->chmuxlist[i];
_floor_P[ci->floor_type[info->floorsubmap[submap]]]->
inverse2(vb,b->flr[info->floorsubmap[submap]],
floormemo[i],pcm);
}
/* transform the PCM data; takes PCM vector, vb; modifies PCM vector */
/* only MDCT right now.... */
for(i=0;i<vi->channels;i++){
float *pcm=vb->pcm[i];
mdct_backward(b->transform[vb->W][0],pcm,pcm);
}
/* all done! */
free(pcmbundle);
free(zerobundle);
free(nonzero);
free(floormemo);
return(0);
}
/* export hooks */
const vorbis_func_mapping mapping0_exportbundle={
&mapping0_pack,
&mapping0_unpack,
&mapping0_free_info,
&mapping0_forward,
&mapping0_inverse
};