ref: f6dbd3d99325352b80e2ff6b0d13e8a1557369cb
dir: /sys/src/cmd/gs/jpeg/jcsample.c/
/*
* jcsample.c
*
* Copyright (C) 1991-1996, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains downsampling routines.
*
* Downsampling input data is counted in "row groups". A row group
* is defined to be max_v_samp_factor pixel rows of each component,
* from which the downsampler produces v_samp_factor sample rows.
* A single row group is processed in each call to the downsampler module.
*
* The downsampler is responsible for edge-expansion of its output data
* to fill an integral number of DCT blocks horizontally. The source buffer
* may be modified if it is helpful for this purpose (the source buffer is
* allocated wide enough to correspond to the desired output width).
* The caller (the prep controller) is responsible for vertical padding.
*
* The downsampler may request "context rows" by setting need_context_rows
* during startup. In this case, the input arrays will contain at least
* one row group's worth of pixels above and below the passed-in data;
* the caller will create dummy rows at image top and bottom by replicating
* the first or last real pixel row.
*
* An excellent reference for image resampling is
* Digital Image Warping, George Wolberg, 1990.
* Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7.
*
* The downsampling algorithm used here is a simple average of the source
* pixels covered by the output pixel. The hi-falutin sampling literature
* refers to this as a "box filter". In general the characteristics of a box
* filter are not very good, but for the specific cases we normally use (1:1
* and 2:1 ratios) the box is equivalent to a "triangle filter" which is not
* nearly so bad. If you intend to use other sampling ratios, you'd be well
* advised to improve this code.
*
* A simple input-smoothing capability is provided. This is mainly intended
* for cleaning up color-dithered GIF input files (if you find it inadequate,
* we suggest using an external filtering program such as pnmconvol). When
* enabled, each input pixel P is replaced by a weighted sum of itself and its
* eight neighbors. P's weight is 1-8*SF and each neighbor's weight is SF,
* where SF = (smoothing_factor / 1024).
* Currently, smoothing is only supported for 2h2v sampling factors.
*/
#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"
/* Pointer to routine to downsample a single component */
typedef JMETHOD(void, downsample1_ptr,
(j_compress_ptr cinfo, jpeg_component_info * compptr,
JSAMPARRAY input_data, JSAMPARRAY output_data));
/* Private subobject */
typedef struct {
struct jpeg_downsampler pub; /* public fields */
/* Downsampling method pointers, one per component */
downsample1_ptr methods[MAX_COMPONENTS];
} my_downsampler;
typedef my_downsampler * my_downsample_ptr;
/*
* Initialize for a downsampling pass.
*/
METHODDEF(void)
start_pass_downsample (j_compress_ptr cinfo)
{
/* no work for now */
}
/*
* Expand a component horizontally from width input_cols to width output_cols,
* by duplicating the rightmost samples.
*/
LOCAL(void)
expand_right_edge (JSAMPARRAY image_data, int num_rows,
JDIMENSION input_cols, JDIMENSION output_cols)
{
register JSAMPROW ptr;
register JSAMPLE pixval;
register int count;
int row;
int numcols = (int) (output_cols - input_cols);
if (numcols > 0) {
for (row = 0; row < num_rows; row++) {
ptr = image_data[row] + input_cols;
pixval = ptr[-1]; /* don't need GETJSAMPLE() here */
for (count = numcols; count > 0; count--)
*ptr++ = pixval;
}
}
}
/*
* Do downsampling for a whole row group (all components).
*
* In this version we simply downsample each component independently.
*/
METHODDEF(void)
sep_downsample (j_compress_ptr cinfo,
JSAMPIMAGE input_buf, JDIMENSION in_row_index,
JSAMPIMAGE output_buf, JDIMENSION out_row_group_index)
{
my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample;
int ci;
jpeg_component_info * compptr;
JSAMPARRAY in_ptr, out_ptr;
for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
ci++, compptr++) {
in_ptr = input_buf[ci] + in_row_index;
out_ptr = output_buf[ci] + (out_row_group_index * compptr->v_samp_factor);
(*downsample->methods[ci]) (cinfo, compptr, in_ptr, out_ptr);
}
}
/*
* Downsample pixel values of a single component.
* One row group is processed per call.
* This version handles arbitrary integral sampling ratios, without smoothing.
* Note that this version is not actually used for customary sampling ratios.
*/
METHODDEF(void)
int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
JSAMPARRAY input_data, JSAMPARRAY output_data)
{
int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v;
JDIMENSION outcol, outcol_h; /* outcol_h == outcol*h_expand */
JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
JSAMPROW inptr, outptr;
INT32 outvalue;
h_expand = cinfo->max_h_samp_factor / compptr->h_samp_factor;
v_expand = cinfo->max_v_samp_factor / compptr->v_samp_factor;
numpix = h_expand * v_expand;
numpix2 = numpix/2;
/* Expand input data enough to let all the output samples be generated
* by the standard loop. Special-casing padded output would be more
* efficient.
*/
expand_right_edge(input_data, cinfo->max_v_samp_factor,
cinfo->image_width, output_cols * h_expand);
inrow = 0;
for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
outptr = output_data[outrow];
for (outcol = 0, outcol_h = 0; outcol < output_cols;
outcol++, outcol_h += h_expand) {
outvalue = 0;
for (v = 0; v < v_expand; v++) {
inptr = input_data[inrow+v] + outcol_h;
for (h = 0; h < h_expand; h++) {
outvalue += (INT32) GETJSAMPLE(*inptr++);
}
}
*outptr++ = (JSAMPLE) ((outvalue + numpix2) / numpix);
}
inrow += v_expand;
}
}
/*
* Downsample pixel values of a single component.
* This version handles the special case of a full-size component,
* without smoothing.
*/
METHODDEF(void)
fullsize_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
JSAMPARRAY input_data, JSAMPARRAY output_data)
{
/* Copy the data */
jcopy_sample_rows(input_data, 0, output_data, 0,
cinfo->max_v_samp_factor, cinfo->image_width);
/* Edge-expand */
expand_right_edge(output_data, cinfo->max_v_samp_factor,
cinfo->image_width, compptr->width_in_blocks * DCTSIZE);
}
/*
* Downsample pixel values of a single component.
* This version handles the common case of 2:1 horizontal and 1:1 vertical,
* without smoothing.
*
* A note about the "bias" calculations: when rounding fractional values to
* integer, we do not want to always round 0.5 up to the next integer.
* If we did that, we'd introduce a noticeable bias towards larger values.
* Instead, this code is arranged so that 0.5 will be rounded up or down at
* alternate pixel locations (a simple ordered dither pattern).
*/
METHODDEF(void)
h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
JSAMPARRAY input_data, JSAMPARRAY output_data)
{
int outrow;
JDIMENSION outcol;
JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
register JSAMPROW inptr, outptr;
register int bias;
/* Expand input data enough to let all the output samples be generated
* by the standard loop. Special-casing padded output would be more
* efficient.
*/
expand_right_edge(input_data, cinfo->max_v_samp_factor,
cinfo->image_width, output_cols * 2);
for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
outptr = output_data[outrow];
inptr = input_data[outrow];
bias = 0; /* bias = 0,1,0,1,... for successive samples */
for (outcol = 0; outcol < output_cols; outcol++) {
*outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr) + GETJSAMPLE(inptr[1])
+ bias) >> 1);
bias ^= 1; /* 0=>1, 1=>0 */
inptr += 2;
}
}
}
/*
* Downsample pixel values of a single component.
* This version handles the standard case of 2:1 horizontal and 2:1 vertical,
* without smoothing.
*/
METHODDEF(void)
h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
JSAMPARRAY input_data, JSAMPARRAY output_data)
{
int inrow, outrow;
JDIMENSION outcol;
JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
register JSAMPROW inptr0, inptr1, outptr;
register int bias;
/* Expand input data enough to let all the output samples be generated
* by the standard loop. Special-casing padded output would be more
* efficient.
*/
expand_right_edge(input_data, cinfo->max_v_samp_factor,
cinfo->image_width, output_cols * 2);
inrow = 0;
for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
outptr = output_data[outrow];
inptr0 = input_data[inrow];
inptr1 = input_data[inrow+1];
bias = 1; /* bias = 1,2,1,2,... for successive samples */
for (outcol = 0; outcol < output_cols; outcol++) {
*outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1])
+ bias) >> 2);
bias ^= 3; /* 1=>2, 2=>1 */
inptr0 += 2; inptr1 += 2;
}
inrow += 2;
}
}
#ifdef INPUT_SMOOTHING_SUPPORTED
/*
* Downsample pixel values of a single component.
* This version handles the standard case of 2:1 horizontal and 2:1 vertical,
* with smoothing. One row of context is required.
*/
METHODDEF(void)
h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
JSAMPARRAY input_data, JSAMPARRAY output_data)
{
int inrow, outrow;
JDIMENSION colctr;
JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr;
INT32 membersum, neighsum, memberscale, neighscale;
/* Expand input data enough to let all the output samples be generated
* by the standard loop. Special-casing padded output would be more
* efficient.
*/
expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2,
cinfo->image_width, output_cols * 2);
/* We don't bother to form the individual "smoothed" input pixel values;
* we can directly compute the output which is the average of the four
* smoothed values. Each of the four member pixels contributes a fraction
* (1-8*SF) to its own smoothed image and a fraction SF to each of the three
* other smoothed pixels, therefore a total fraction (1-5*SF)/4 to the final
* output. The four corner-adjacent neighbor pixels contribute a fraction
* SF to just one smoothed pixel, or SF/4 to the final output; while the
* eight edge-adjacent neighbors contribute SF to each of two smoothed
* pixels, or SF/2 overall. In order to use integer arithmetic, these
* factors are scaled by 2^16 = 65536.
* Also recall that SF = smoothing_factor / 1024.
*/
memberscale = 16384 - cinfo->smoothing_factor * 80; /* scaled (1-5*SF)/4 */
neighscale = cinfo->smoothing_factor * 16; /* scaled SF/4 */
inrow = 0;
for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
outptr = output_data[outrow];
inptr0 = input_data[inrow];
inptr1 = input_data[inrow+1];
above_ptr = input_data[inrow-1];
below_ptr = input_data[inrow+2];
/* Special case for first column: pretend column -1 is same as column 0 */
membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]);
neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) +
GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) +
GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[2]) +
GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[2]);
neighsum += neighsum;
neighsum += GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[2]) +
GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[2]);
membersum = membersum * memberscale + neighsum * neighscale;
*outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2;
for (colctr = output_cols - 2; colctr > 0; colctr--) {
/* sum of pixels directly mapped to this output element */
membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]);
/* sum of edge-neighbor pixels */
neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) +
GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) +
GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[2]) +
GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[2]);
/* The edge-neighbors count twice as much as corner-neighbors */
neighsum += neighsum;
/* Add in the corner-neighbors */
neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[2]) +
GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[2]);
/* form final output scaled up by 2^16 */
membersum = membersum * memberscale + neighsum * neighscale;
/* round, descale and output it */
*outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2;
}
/* Special case for last column */
membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]);
neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) +
GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) +
GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[1]) +
GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[1]);
neighsum += neighsum;
neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[1]) +
GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[1]);
membersum = membersum * memberscale + neighsum * neighscale;
*outptr = (JSAMPLE) ((membersum + 32768) >> 16);
inrow += 2;
}
}
/*
* Downsample pixel values of a single component.
* This version handles the special case of a full-size component,
* with smoothing. One row of context is required.
*/
METHODDEF(void)
fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr,
JSAMPARRAY input_data, JSAMPARRAY output_data)
{
int outrow;
JDIMENSION colctr;
JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
register JSAMPROW inptr, above_ptr, below_ptr, outptr;
INT32 membersum, neighsum, memberscale, neighscale;
int colsum, lastcolsum, nextcolsum;
/* Expand input data enough to let all the output samples be generated
* by the standard loop. Special-casing padded output would be more
* efficient.
*/
expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2,
cinfo->image_width, output_cols);
/* Each of the eight neighbor pixels contributes a fraction SF to the
* smoothed pixel, while the main pixel contributes (1-8*SF). In order
* to use integer arithmetic, these factors are multiplied by 2^16 = 65536.
* Also recall that SF = smoothing_factor / 1024.
*/
memberscale = 65536L - cinfo->smoothing_factor * 512L; /* scaled 1-8*SF */
neighscale = cinfo->smoothing_factor * 64; /* scaled SF */
for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
outptr = output_data[outrow];
inptr = input_data[outrow];
above_ptr = input_data[outrow-1];
below_ptr = input_data[outrow+1];
/* Special case for first column */
colsum = GETJSAMPLE(*above_ptr++) + GETJSAMPLE(*below_ptr++) +
GETJSAMPLE(*inptr);
membersum = GETJSAMPLE(*inptr++);
nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) +
GETJSAMPLE(*inptr);
neighsum = colsum + (colsum - membersum) + nextcolsum;
membersum = membersum * memberscale + neighsum * neighscale;
*outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
lastcolsum = colsum; colsum = nextcolsum;
for (colctr = output_cols - 2; colctr > 0; colctr--) {
membersum = GETJSAMPLE(*inptr++);
above_ptr++; below_ptr++;
nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) +
GETJSAMPLE(*inptr);
neighsum = lastcolsum + (colsum - membersum) + nextcolsum;
membersum = membersum * memberscale + neighsum * neighscale;
*outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
lastcolsum = colsum; colsum = nextcolsum;
}
/* Special case for last column */
membersum = GETJSAMPLE(*inptr);
neighsum = lastcolsum + (colsum - membersum) + colsum;
membersum = membersum * memberscale + neighsum * neighscale;
*outptr = (JSAMPLE) ((membersum + 32768) >> 16);
}
}
#endif /* INPUT_SMOOTHING_SUPPORTED */
/*
* Module initialization routine for downsampling.
* Note that we must select a routine for each component.
*/
GLOBAL(void)
jinit_downsampler (j_compress_ptr cinfo)
{
my_downsample_ptr downsample;
int ci;
jpeg_component_info * compptr;
boolean smoothok = TRUE;
downsample = (my_downsample_ptr)
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
SIZEOF(my_downsampler));
cinfo->downsample = (struct jpeg_downsampler *) downsample;
downsample->pub.start_pass = start_pass_downsample;
downsample->pub.downsample = sep_downsample;
downsample->pub.need_context_rows = FALSE;
if (cinfo->CCIR601_sampling)
ERREXIT(cinfo, JERR_CCIR601_NOTIMPL);
/* Verify we can handle the sampling factors, and set up method pointers */
for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
ci++, compptr++) {
if (compptr->h_samp_factor == cinfo->max_h_samp_factor &&
compptr->v_samp_factor == cinfo->max_v_samp_factor) {
#ifdef INPUT_SMOOTHING_SUPPORTED
if (cinfo->smoothing_factor) {
downsample->methods[ci] = fullsize_smooth_downsample;
downsample->pub.need_context_rows = TRUE;
} else
#endif
downsample->methods[ci] = fullsize_downsample;
} else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor &&
compptr->v_samp_factor == cinfo->max_v_samp_factor) {
smoothok = FALSE;
downsample->methods[ci] = h2v1_downsample;
} else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor &&
compptr->v_samp_factor * 2 == cinfo->max_v_samp_factor) {
#ifdef INPUT_SMOOTHING_SUPPORTED
if (cinfo->smoothing_factor) {
downsample->methods[ci] = h2v2_smooth_downsample;
downsample->pub.need_context_rows = TRUE;
} else
#endif
downsample->methods[ci] = h2v2_downsample;
} else if ((cinfo->max_h_samp_factor % compptr->h_samp_factor) == 0 &&
(cinfo->max_v_samp_factor % compptr->v_samp_factor) == 0) {
smoothok = FALSE;
downsample->methods[ci] = int_downsample;
} else
ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL);
}
#ifdef INPUT_SMOOTHING_SUPPORTED
if (cinfo->smoothing_factor && !smoothok)
TRACEMS(cinfo, 0, JTRC_SMOOTH_NOTIMPL);
#endif
}