shithub: libvpx

ref: 27c13712c9c5d665ee84d8753255a23257c43600
dir: /vp9/encoder/vp9_speed_features.h/

View raw version
/*
 *  Copyright (c) 2010 The WebM project authors. All Rights Reserved.
 *
 *  Use of this source code is governed by a BSD-style license
 *  that can be found in the LICENSE file in the root of the source
 *  tree. An additional intellectual property rights grant can be found
 *  in the file PATENTS.  All contributing project authors may
 *  be found in the AUTHORS file in the root of the source tree.
 */

#ifndef VP9_ENCODER_VP9_SPEED_FEATURES_H_
#define VP9_ENCODER_VP9_SPEED_FEATURES_H_

#include "vp9/common/vp9_enums.h"

#ifdef __cplusplus
extern "C" {
#endif

enum {
  INTRA_ALL       = (1 << DC_PRED) |
                    (1 << V_PRED) | (1 << H_PRED) |
                    (1 << D45_PRED) | (1 << D135_PRED) |
                    (1 << D117_PRED) | (1 << D153_PRED) |
                    (1 << D207_PRED) | (1 << D63_PRED) |
                    (1 << TM_PRED),
  INTRA_DC        = (1 << DC_PRED),
  INTRA_DC_TM     = (1 << DC_PRED) | (1 << TM_PRED),
  INTRA_DC_H_V    = (1 << DC_PRED) | (1 << V_PRED) | (1 << H_PRED),
  INTRA_DC_TM_H_V = (1 << DC_PRED) | (1 << TM_PRED) | (1 << V_PRED) |
                    (1 << H_PRED)
};

enum {
  INTER_ALL = (1 << NEARESTMV) | (1 << NEARMV) | (1 << ZEROMV) | (1 << NEWMV),
  INTER_NEAREST = (1 << NEARESTMV),
  INTER_NEAREST_NEW = (1 << NEARESTMV) | (1 << NEWMV),
  INTER_NEAREST_ZERO = (1 << NEARESTMV) | (1 << ZEROMV),
  INTER_NEAREST_NEW_ZERO = (1 << NEARESTMV) | (1 << ZEROMV) | (1 << NEWMV),
  INTER_NEAREST_NEAR_NEW = (1 << NEARESTMV) | (1 << NEARMV) | (1 << NEWMV),
  INTER_NEAREST_NEAR_ZERO = (1 << NEARESTMV) | (1 << NEARMV) | (1 << ZEROMV),
};

enum {
  DISABLE_ALL_INTER_SPLIT   = (1 << THR_COMP_GA) |
                              (1 << THR_COMP_LA) |
                              (1 << THR_ALTR) |
                              (1 << THR_GOLD) |
                              (1 << THR_LAST),

  DISABLE_ALL_SPLIT         = (1 << THR_INTRA) | DISABLE_ALL_INTER_SPLIT,

  DISABLE_COMPOUND_SPLIT    = (1 << THR_COMP_GA) | (1 << THR_COMP_LA),

  LAST_AND_INTRA_SPLIT_ONLY = (1 << THR_COMP_GA) |
                              (1 << THR_COMP_LA) |
                              (1 << THR_ALTR) |
                              (1 << THR_GOLD)
};

typedef enum {
  DIAMOND = 0,
  NSTEP = 1,
  HEX = 2,
  BIGDIA = 3,
  SQUARE = 4,
  FAST_HEX = 5,
  FAST_DIAMOND = 6
} SEARCH_METHODS;

typedef enum {
  // No recode.
  DISALLOW_RECODE = 0,
  // Allow recode for KF and exceeding maximum frame bandwidth.
  ALLOW_RECODE_KFMAXBW = 1,
  // Allow recode only for KF/ARF/GF frames.
  ALLOW_RECODE_KFARFGF = 2,
  // Allow recode for all frames based on bitrate constraints.
  ALLOW_RECODE = 3,
} RECODE_LOOP_TYPE;

typedef enum {
  SUBPEL_TREE = 0,
  SUBPEL_TREE_PRUNED = 1,           // Prunes 1/2-pel searches
  SUBPEL_TREE_PRUNED_MORE = 2,      // Prunes 1/2-pel searches more aggressively
  SUBPEL_TREE_PRUNED_EVENMORE = 3,  // Prunes 1/2- and 1/4-pel searches
  // Other methods to come
} SUBPEL_SEARCH_METHODS;

typedef enum {
  NO_MOTION_THRESHOLD = 0,
  LOW_MOTION_THRESHOLD = 7
} MOTION_THRESHOLD;

typedef enum {
  USE_FULL_RD = 0,
  USE_LARGESTALL,
  USE_TX_8X8
} TX_SIZE_SEARCH_METHOD;

typedef enum {
  NOT_IN_USE = 0,
  RELAXED_NEIGHBORING_MIN_MAX = 1,
  STRICT_NEIGHBORING_MIN_MAX = 2
} AUTO_MIN_MAX_MODE;

typedef enum {
  // Try the full image with different values.
  LPF_PICK_FROM_FULL_IMAGE,
  // Try a small portion of the image with different values.
  LPF_PICK_FROM_SUBIMAGE,
  // Estimate the level based on quantizer and frame type
  LPF_PICK_FROM_Q,
  // Pick 0 to disable LPF if LPF was enabled last frame
  LPF_PICK_MINIMAL_LPF
} LPF_PICK_METHOD;

typedef enum {
  // Terminate search early based on distortion so far compared to
  // qp step, distortion in the neighborhood of the frame, etc.
  FLAG_EARLY_TERMINATE = 1 << 0,

  // Skips comp inter modes if the best so far is an intra mode.
  FLAG_SKIP_COMP_BESTINTRA = 1 << 1,

  // Skips oblique intra modes if the best so far is an inter mode.
  FLAG_SKIP_INTRA_BESTINTER = 1 << 3,

  // Skips oblique intra modes  at angles 27, 63, 117, 153 if the best
  // intra so far is not one of the neighboring directions.
  FLAG_SKIP_INTRA_DIRMISMATCH = 1 << 4,

  // Skips intra modes other than DC_PRED if the source variance is small
  FLAG_SKIP_INTRA_LOWVAR = 1 << 5,
} MODE_SEARCH_SKIP_LOGIC;

typedef enum {
  FLAG_SKIP_EIGHTTAP = 1 << EIGHTTAP,
  FLAG_SKIP_EIGHTTAP_SMOOTH = 1 << EIGHTTAP_SMOOTH,
  FLAG_SKIP_EIGHTTAP_SHARP = 1 << EIGHTTAP_SHARP,
} INTERP_FILTER_MASK;

typedef enum {
  // Search partitions using RD/NONRD criterion
  SEARCH_PARTITION,

  // Always use a fixed size partition
  FIXED_PARTITION,

  REFERENCE_PARTITION,

  // Use an arbitrary partitioning scheme based on source variance within
  // a 64X64 SB
  VAR_BASED_PARTITION,

  // Use non-fixed partitions based on source variance
  SOURCE_VAR_BASED_PARTITION
} PARTITION_SEARCH_TYPE;

typedef enum {
  // Does a dry run to see if any of the contexts need to be updated or not,
  // before the final run.
  TWO_LOOP = 0,

  // No dry run, also only half the coef contexts and bands are updated.
  // The rest are not updated at all.
  ONE_LOOP_REDUCED = 1
} FAST_COEFF_UPDATE;

typedef struct MV_SPEED_FEATURES {
  // Motion search method (Diamond, NSTEP, Hex, Big Diamond, Square, etc).
  SEARCH_METHODS search_method;

  // This parameter controls which step in the n-step process we start at.
  // It's changed adaptively based on circumstances.
  int reduce_first_step_size;

  // If this is set to 1, we limit the motion search range to 2 times the
  // largest motion vector found in the last frame.
  int auto_mv_step_size;

  // Subpel_search_method can only be subpel_tree which does a subpixel
  // logarithmic search that keeps stepping at 1/2 pixel units until
  // you stop getting a gain, and then goes on to 1/4 and repeats
  // the same process. Along the way it skips many diagonals.
  SUBPEL_SEARCH_METHODS subpel_search_method;

  // Maximum number of steps in logarithmic subpel search before giving up.
  int subpel_iters_per_step;

  // Control when to stop subpel search
  int subpel_force_stop;

  // This variable sets the step_param used in full pel motion search.
  int fullpel_search_step_param;
} MV_SPEED_FEATURES;

#define MAX_MESH_STEP 4

typedef struct MESH_PATTERN {
  int range;
  int interval;
} MESH_PATTERN;

typedef struct SPEED_FEATURES {
  MV_SPEED_FEATURES mv;

  // Frame level coding parameter update
  int frame_parameter_update;

  RECODE_LOOP_TYPE recode_loop;

  // Trellis (dynamic programming) optimization of quantized values (+1, 0).
  int optimize_coefficients;

  // Always set to 0. If on it enables 0 cost background transmission
  // (except for the initial transmission of the segmentation). The feature is
  // disabled because the addition of very large block sizes make the
  // backgrounds very to cheap to encode, and the segmentation we have
  // adds overhead.
  int static_segmentation;

  // If 1 we iterate finding a best reference for 2 ref frames together - via
  // a log search that iterates 4 times (check around mv for last for best
  // error of combined predictor then check around mv for alt). If 0 we
  // we just use the best motion vector found for each frame by itself.
  BLOCK_SIZE comp_inter_joint_search_thresh;

  // This variable is used to cap the maximum number of times we skip testing a
  // mode to be evaluated. A high value means we will be faster.
  int adaptive_rd_thresh;

  // Enables skipping the reconstruction step (idct, recon) in the
  // intermediate steps assuming the last frame didn't have too many intra
  // blocks and the q is less than a threshold.
  int skip_encode_sb;
  int skip_encode_frame;
  // Speed feature to allow or disallow skipping of recode at block
  // level within a frame.
  int allow_skip_recode;

  // Coefficient probability model approximation step size
  int coeff_prob_appx_step;

  // The threshold is to determine how slow the motino is, it is used when
  // use_lastframe_partitioning is set to LAST_FRAME_PARTITION_LOW_MOTION
  MOTION_THRESHOLD lf_motion_threshold;

  // Determine which method we use to determine transform size. We can choose
  // between options like full rd, largest for prediction size, largest
  // for intra and model coefs for the rest.
  TX_SIZE_SEARCH_METHOD tx_size_search_method;

  // Low precision 32x32 fdct keeps everything in 16 bits and thus is less
  // precise but significantly faster than the non lp version.
  int use_lp32x32fdct;

  // After looking at the first set of modes (set by index here), skip
  // checking modes for reference frames that don't match the reference frame
  // of the best so far.
  int mode_skip_start;

  // TODO(JBB): Remove this.
  int reference_masking;

  PARTITION_SEARCH_TYPE partition_search_type;

  // Used if partition_search_type = FIXED_SIZE_PARTITION
  BLOCK_SIZE always_this_block_size;

  // Skip rectangular partition test when partition type none gives better
  // rd than partition type split.
  int less_rectangular_check;

  // Disable testing non square partitions. (eg 16x32)
  int use_square_partition_only;
  BLOCK_SIZE use_square_only_threshold;

  // Sets min and max partition sizes for this 64x64 region based on the
  // same 64x64 in last encoded frame, and the left and above neighbor.
  AUTO_MIN_MAX_MODE auto_min_max_partition_size;
  // Ensures the rd based auto partition search will always
  // go down at least to the specified level.
  BLOCK_SIZE rd_auto_partition_min_limit;

  // Min and max partition size we enable (block_size) as per auto
  // min max, but also used by adjust partitioning, and pick_partitioning.
  BLOCK_SIZE default_min_partition_size;
  BLOCK_SIZE default_max_partition_size;

  // Whether or not we allow partitions one smaller or one greater than the last
  // frame's partitioning. Only used if use_lastframe_partitioning is set.
  int adjust_partitioning_from_last_frame;

  // How frequently we re do the partitioning from scratch. Only used if
  // use_lastframe_partitioning is set.
  int last_partitioning_redo_frequency;

  // Disables sub 8x8 blocksizes in different scenarios: Choices are to disable
  // it always, to allow it for only Last frame and Intra, disable it for all
  // inter modes or to enable it always.
  int disable_split_mask;

  // TODO(jingning): combine the related motion search speed features
  // This allows us to use motion search at other sizes as a starting
  // point for this motion search and limits the search range around it.
  int adaptive_motion_search;

  // Flag for allowing some use of exhaustive searches;
  int allow_exhaustive_searches;

  // Threshold for allowing exhaistive motion search.
  int exhaustive_searches_thresh;

  // Maximum number of exhaustive searches for a frame.
  int max_exaustive_pct;

  // Pattern to be used for any exhaustive mesh searches.
  MESH_PATTERN mesh_patterns[MAX_MESH_STEP];

  int schedule_mode_search;

  // Allows sub 8x8 modes to use the prediction filter that was determined
  // best for 8x8 mode. If set to 0 we always re check all the filters for
  // sizes less than 8x8, 1 means we check all filter modes if no 8x8 filter
  // was selected, and 2 means we use 8 tap if no 8x8 filter mode was selected.
  int adaptive_pred_interp_filter;

  // Adaptive prediction mode search
  int adaptive_mode_search;

  // Chessboard pattern prediction filter type search
  int cb_pred_filter_search;

  int cb_partition_search;

  int motion_field_mode_search;

  int alt_ref_search_fp;

  // Fast quantization process path
  int use_quant_fp;

  // Use finer quantizer in every other few frames that run variable block
  // partition type search.
  int force_frame_boost;

  // Maximally allowed base quantization index fluctuation.
  int max_delta_qindex;

  // Implements various heuristics to skip searching modes
  // The heuristics selected are based on  flags
  // defined in the MODE_SEARCH_SKIP_HEURISTICS enum
  unsigned int mode_search_skip_flags;

  // A source variance threshold below which filter search is disabled
  // Choose a very large value (UINT_MAX) to use 8-tap always
  unsigned int disable_filter_search_var_thresh;

  // These bit masks allow you to enable or disable intra modes for each
  // transform size separately.
  int intra_y_mode_mask[TX_SIZES];
  int intra_uv_mode_mask[TX_SIZES];

  // These bit masks allow you to enable or disable intra modes for each
  // prediction block size separately.
  int intra_y_mode_bsize_mask[BLOCK_SIZES];

  // This variable enables an early break out of mode testing if the model for
  // rd built from the prediction signal indicates a value that's much
  // higher than the best rd we've seen so far.
  int use_rd_breakout;

  // This enables us to use an estimate for intra rd based on dc mode rather
  // than choosing an actual uv mode in the stage of encoding before the actual
  // final encode.
  int use_uv_intra_rd_estimate;

  // This feature controls how the loop filter level is determined.
  LPF_PICK_METHOD lpf_pick;

  // This feature limits the number of coefficients updates we actually do
  // by only looking at counts from 1/2 the bands.
  FAST_COEFF_UPDATE use_fast_coef_updates;

  // This flag controls the use of non-RD mode decision.
  int use_nonrd_pick_mode;

  // A binary mask indicating if NEARESTMV, NEARMV, ZEROMV, NEWMV
  // modes are used in order from LSB to MSB for each BLOCK_SIZE.
  int inter_mode_mask[BLOCK_SIZES];

  // This feature controls whether we do the expensive context update and
  // calculation in the rd coefficient costing loop.
  int use_fast_coef_costing;

  // This feature controls the tolerence vs target used in deciding whether to
  // recode a frame. It has no meaning if recode is disabled.
  int recode_tolerance;

  // This variable controls the maximum block size where intra blocks can be
  // used in inter frames.
  // TODO(aconverse): Fold this into one of the other many mode skips
  BLOCK_SIZE max_intra_bsize;

  // The frequency that we check if SOURCE_VAR_BASED_PARTITION or
  // FIXED_PARTITION search type should be used.
  int search_type_check_frequency;

  // When partition is pre-set, the inter prediction result from pick_inter_mode
  // can be reused in final block encoding process. It is enabled only for real-
  // time mode speed 6.
  int reuse_inter_pred_sby;

  // This variable sets the encode_breakout threshold. Currently, it is only
  // enabled in real time mode.
  int encode_breakout_thresh;

  // default interp filter choice
  INTERP_FILTER default_interp_filter;

  // Early termination in transform size search, which only applies while
  // tx_size_search_method is USE_FULL_RD.
  int tx_size_search_breakout;

  // adaptive interp_filter search to allow skip of certain filter types.
  int adaptive_interp_filter_search;

  // mask for skip evaluation of certain interp_filter type.
  INTERP_FILTER_MASK interp_filter_search_mask;

  // Partition search early breakout thresholds.
  int64_t partition_search_breakout_dist_thr;
  int partition_search_breakout_rate_thr;

  // Allow skipping partition search for still image frame
  int allow_partition_search_skip;

  // Fast approximation of vp9_model_rd_from_var_lapndz
  int simple_model_rd_from_var;

  // Skip a number of expensive mode evaluations for blocks with zero source
  // variance.
  int short_circuit_flat_blocks;
} SPEED_FEATURES;

struct VP9_COMP;

void vp9_set_speed_features_framesize_independent(struct VP9_COMP *cpi);
void vp9_set_speed_features_framesize_dependent(struct VP9_COMP *cpi);

#ifdef __cplusplus
}  // extern "C"
#endif

#endif  // VP9_ENCODER_VP9_SPEED_FEATURES_H_