ref: 49f6ff11032df0d6696da8cf544d0292e185d00c
dir: /vp9/encoder/vp9_aq_complexity.c/
/*
* Copyright (c) 2014 The WebM project authors. All Rights Reserved.
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
*/
#include <limits.h>
#include <math.h>
#include "vpx_ports/system_state.h"
#include "vp9/encoder/vp9_aq_complexity.h"
#include "vp9/encoder/vp9_aq_variance.h"
#include "vp9/encoder/vp9_encodeframe.h"
#include "vp9/common/vp9_seg_common.h"
#include "vp9/encoder/vp9_segmentation.h"
#define AQ_C_SEGMENTS 5
#define DEFAULT_AQ2_SEG 3 // Neutral Q segment
#define AQ_C_STRENGTHS 3
static const double aq_c_q_adj_factor[AQ_C_STRENGTHS][AQ_C_SEGMENTS] =
{ {1.75, 1.25, 1.05, 1.00, 0.90},
{2.00, 1.50, 1.15, 1.00, 0.85},
{2.50, 1.75, 1.25, 1.00, 0.80} };
static const double aq_c_transitions[AQ_C_STRENGTHS][AQ_C_SEGMENTS] =
{ {0.15, 0.30, 0.55, 2.00, 100.0},
{0.20, 0.40, 0.65, 2.00, 100.0},
{0.25, 0.50, 0.75, 2.00, 100.0} };
static const double aq_c_var_thresholds[AQ_C_STRENGTHS][AQ_C_SEGMENTS] =
{ {-4.0, -3.0, -2.0, 100.00, 100.0},
{-3.5, -2.5, -1.5, 100.00, 100.0},
{-3.0, -2.0, -1.0, 100.00, 100.0} };
#define DEFAULT_COMPLEXITY 64
static int get_aq_c_strength(int q_index, vpx_bit_depth_t bit_depth) {
// Approximate base quatizer (truncated to int)
const int base_quant = vp9_ac_quant(q_index, 0, bit_depth) / 4;
return (base_quant > 10) + (base_quant > 25);
}
void vp9_setup_in_frame_q_adj(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
struct segmentation *const seg = &cm->seg;
// Make SURE use of floating point in this function is safe.
vpx_clear_system_state();
if (cm->frame_type == KEY_FRAME ||
cpi->refresh_alt_ref_frame ||
(cpi->refresh_golden_frame && !cpi->rc.is_src_frame_alt_ref)) {
int segment;
const int aq_strength = get_aq_c_strength(cm->base_qindex, cm->bit_depth);
// Clear down the segment map.
memset(cpi->segmentation_map, DEFAULT_AQ2_SEG, cm->mi_rows * cm->mi_cols);
vp9_clearall_segfeatures(seg);
// Segmentation only makes sense if the target bits per SB is above a
// threshold. Below this the overheads will usually outweigh any benefit.
if (cpi->rc.sb64_target_rate < 256) {
vp9_disable_segmentation(seg);
return;
}
vp9_enable_segmentation(seg);
// Select delta coding method.
seg->abs_delta = SEGMENT_DELTADATA;
// Default segment "Q" feature is disabled so it defaults to the baseline Q.
vp9_disable_segfeature(seg, DEFAULT_AQ2_SEG, SEG_LVL_ALT_Q);
// Use some of the segments for in frame Q adjustment.
for (segment = 0; segment < AQ_C_SEGMENTS; ++segment) {
int qindex_delta;
if (segment == DEFAULT_AQ2_SEG)
continue;
qindex_delta =
vp9_compute_qdelta_by_rate(&cpi->rc, cm->frame_type, cm->base_qindex,
aq_c_q_adj_factor[aq_strength][segment],
cm->bit_depth);
// For AQ complexity mode, we dont allow Q0 in a segment if the base
// Q is not 0. Q0 (lossless) implies 4x4 only and in AQ mode 2 a segment
// Q delta is sometimes applied without going back around the rd loop.
// This could lead to an illegal combination of partition size and q.
if ((cm->base_qindex != 0) && ((cm->base_qindex + qindex_delta) == 0)) {
qindex_delta = -cm->base_qindex + 1;
}
if ((cm->base_qindex + qindex_delta) > 0) {
vp9_enable_segfeature(seg, segment, SEG_LVL_ALT_Q);
vp9_set_segdata(seg, segment, SEG_LVL_ALT_Q, qindex_delta);
}
}
}
}
#define DEFAULT_LV_THRESH 10.0
#define MIN_DEFAULT_LV_THRESH 8.0
#define VAR_STRENGTH_STEP 0.25
// Select a segment for the current block.
// The choice of segment for a block depends on the ratio of the projected
// bits for the block vs a target average and its spatial complexity.
void vp9_caq_select_segment(VP9_COMP *cpi, MACROBLOCK *mb, BLOCK_SIZE bs,
int mi_row, int mi_col, int projected_rate) {
VP9_COMMON *const cm = &cpi->common;
const int mi_offset = mi_row * cm->mi_cols + mi_col;
const int bw = num_8x8_blocks_wide_lookup[BLOCK_64X64];
const int bh = num_8x8_blocks_high_lookup[BLOCK_64X64];
const int xmis = MIN(cm->mi_cols - mi_col, num_8x8_blocks_wide_lookup[bs]);
const int ymis = MIN(cm->mi_rows - mi_row, num_8x8_blocks_high_lookup[bs]);
int x, y;
int i;
unsigned char segment;
if (0) {
segment = DEFAULT_AQ2_SEG;
} else {
// Rate depends on fraction of a SB64 in frame (xmis * ymis / bw * bh).
// It is converted to bits * 256 units.
const int target_rate = (cpi->rc.sb64_target_rate * xmis * ymis * 256) /
(bw * bh);
double logvar;
double low_var_thresh;
const int aq_strength = get_aq_c_strength(cm->base_qindex, cm->bit_depth);
vpx_clear_system_state();
low_var_thresh = (cpi->oxcf.pass == 2)
? MAX(cpi->twopass.mb_av_energy, MIN_DEFAULT_LV_THRESH)
: DEFAULT_LV_THRESH;
vp9_setup_src_planes(mb, cpi->Source, mi_row, mi_col);
logvar = vp9_log_block_var(cpi, mb, bs);
segment = AQ_C_SEGMENTS - 1; // Just in case no break out below.
for (i = 0; i < AQ_C_SEGMENTS; ++i) {
// Test rate against a threshold value and variance against a threshold.
// Increasing segment number (higher variance and complexity) = higher Q.
if ((projected_rate <
target_rate * aq_c_transitions[aq_strength][i]) &&
(logvar < (low_var_thresh + aq_c_var_thresholds[aq_strength][i]))) {
segment = i;
break;
}
}
}
// Fill in the entires in the segment map corresponding to this SB64.
for (y = 0; y < ymis; y++) {
for (x = 0; x < xmis; x++) {
cpi->segmentation_map[mi_offset + y * cm->mi_cols + x] = segment;
}
}
}