ref: 619951af97b1d4902ff90ad254b3f39ad6f9e142
dir: /vp9/encoder/vp9_firstpass.c/
/*
* Copyright (c) 2010 The WebM project authors. All Rights Reserved.
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
*/
#include <limits.h>
#include <math.h>
#include <stdio.h>
#include "./vpx_scale_rtcd.h"
#include "vpx_mem/vpx_mem.h"
#include "vpx_scale/vpx_scale.h"
#include "vpx_scale/yv12config.h"
#include "vp9/common/vp9_entropymv.h"
#include "vp9/common/vp9_quant_common.h"
#include "vp9/common/vp9_reconinter.h" // vp9_setup_dst_planes()
#include "vp9/common/vp9_systemdependent.h"
#include "vp9/encoder/vp9_aq_variance.h"
#include "vp9/encoder/vp9_block.h"
#include "vp9/encoder/vp9_encodeframe.h"
#include "vp9/encoder/vp9_encodemb.h"
#include "vp9/encoder/vp9_encodemv.h"
#include "vp9/encoder/vp9_encoder.h"
#include "vp9/encoder/vp9_extend.h"
#include "vp9/encoder/vp9_firstpass.h"
#include "vp9/encoder/vp9_mcomp.h"
#include "vp9/encoder/vp9_quantize.h"
#include "vp9/encoder/vp9_rd.h"
#include "vp9/encoder/vp9_variance.h"
#define OUTPUT_FPF 0
#define IIFACTOR 12.5
#define IIKFACTOR1 12.5
#define IIKFACTOR2 15.0
#define RMAX 512.0
#define GF_RMAX 96.0
#define ERR_DIVISOR 150.0
#define MIN_DECAY_FACTOR 0.1
#define SVC_FACTOR_PT_LOW 0.45
#define FACTOR_PT_LOW 0.5
#define FACTOR_PT_HIGH 0.9
#define KF_MB_INTRA_MIN 150
#define GF_MB_INTRA_MIN 100
#define DOUBLE_DIVIDE_CHECK(x) ((x) < 0 ? (x) - 0.000001 : (x) + 0.000001)
#define MIN_KF_BOOST 300
#define MIN_GF_INTERVAL 4
static void swap_yv12(YV12_BUFFER_CONFIG *a, YV12_BUFFER_CONFIG *b) {
YV12_BUFFER_CONFIG temp = *a;
*a = *b;
*b = temp;
}
static int gfboost_qadjust(int qindex) {
const double q = vp9_convert_qindex_to_q(qindex);
return (int)((0.00000828 * q * q * q) +
(-0.0055 * q * q) +
(1.32 * q) + 79.3);
}
// Resets the first pass file to the given position using a relative seek from
// the current position.
static void reset_fpf_position(TWO_PASS *p,
const FIRSTPASS_STATS *position) {
p->stats_in = position;
}
// Read frame stats at an offset from the current position.
static const FIRSTPASS_STATS *read_frame_stats(const TWO_PASS *p, int offset) {
if ((offset >= 0 && p->stats_in + offset >= p->stats_in_end) ||
(offset < 0 && p->stats_in + offset < p->stats_in_start)) {
return NULL;
}
return &p->stats_in[offset];
}
static int input_stats(TWO_PASS *p, FIRSTPASS_STATS *fps) {
if (p->stats_in >= p->stats_in_end)
return EOF;
*fps = *p->stats_in;
++p->stats_in;
return 1;
}
static void output_stats(FIRSTPASS_STATS *stats,
struct vpx_codec_pkt_list *pktlist) {
struct vpx_codec_cx_pkt pkt;
pkt.kind = VPX_CODEC_STATS_PKT;
pkt.data.twopass_stats.buf = stats;
pkt.data.twopass_stats.sz = sizeof(FIRSTPASS_STATS);
vpx_codec_pkt_list_add(pktlist, &pkt);
// TEMP debug code
#if OUTPUT_FPF
{
FILE *fpfile;
fpfile = fopen("firstpass.stt", "a");
fprintf(fpfile, "%12.0f %12.0f %12.0f %12.0f %12.4f %12.4f"
"%12.4f %12.4f %12.4f %12.4f %12.4f %12.4f %12.4f"
"%12.0f %12.0f %12.4f %12.0f %12.0f %12.4f\n",
stats->frame,
stats->intra_error,
stats->coded_error,
stats->sr_coded_error,
stats->pcnt_inter,
stats->pcnt_motion,
stats->pcnt_second_ref,
stats->pcnt_neutral,
stats->MVr,
stats->mvr_abs,
stats->MVc,
stats->mvc_abs,
stats->MVrv,
stats->MVcv,
stats->mv_in_out_count,
stats->new_mv_count,
stats->count,
stats->duration);
fclose(fpfile);
}
#endif
}
#if CONFIG_FP_MB_STATS
static void output_fpmb_stats(uint8_t *this_frame_mb_stats, VP9_COMMON *cm,
struct vpx_codec_pkt_list *pktlist) {
struct vpx_codec_cx_pkt pkt;
pkt.kind = VPX_CODEC_FPMB_STATS_PKT;
pkt.data.firstpass_mb_stats.buf = this_frame_mb_stats;
pkt.data.firstpass_mb_stats.sz = cm->MBs * sizeof(uint8_t);
vpx_codec_pkt_list_add(pktlist, &pkt);
}
#endif
static void zero_stats(FIRSTPASS_STATS *section) {
section->frame = 0.0;
section->intra_error = 0.0;
section->coded_error = 0.0;
section->sr_coded_error = 0.0;
section->pcnt_inter = 0.0;
section->pcnt_motion = 0.0;
section->pcnt_second_ref = 0.0;
section->pcnt_neutral = 0.0;
section->MVr = 0.0;
section->mvr_abs = 0.0;
section->MVc = 0.0;
section->mvc_abs = 0.0;
section->MVrv = 0.0;
section->MVcv = 0.0;
section->mv_in_out_count = 0.0;
section->new_mv_count = 0.0;
section->count = 0.0;
section->duration = 1.0;
section->spatial_layer_id = 0;
}
static void accumulate_stats(FIRSTPASS_STATS *section,
const FIRSTPASS_STATS *frame) {
section->frame += frame->frame;
section->spatial_layer_id = frame->spatial_layer_id;
section->intra_error += frame->intra_error;
section->coded_error += frame->coded_error;
section->sr_coded_error += frame->sr_coded_error;
section->pcnt_inter += frame->pcnt_inter;
section->pcnt_motion += frame->pcnt_motion;
section->pcnt_second_ref += frame->pcnt_second_ref;
section->pcnt_neutral += frame->pcnt_neutral;
section->MVr += frame->MVr;
section->mvr_abs += frame->mvr_abs;
section->MVc += frame->MVc;
section->mvc_abs += frame->mvc_abs;
section->MVrv += frame->MVrv;
section->MVcv += frame->MVcv;
section->mv_in_out_count += frame->mv_in_out_count;
section->new_mv_count += frame->new_mv_count;
section->count += frame->count;
section->duration += frame->duration;
}
static void subtract_stats(FIRSTPASS_STATS *section,
const FIRSTPASS_STATS *frame) {
section->frame -= frame->frame;
section->intra_error -= frame->intra_error;
section->coded_error -= frame->coded_error;
section->sr_coded_error -= frame->sr_coded_error;
section->pcnt_inter -= frame->pcnt_inter;
section->pcnt_motion -= frame->pcnt_motion;
section->pcnt_second_ref -= frame->pcnt_second_ref;
section->pcnt_neutral -= frame->pcnt_neutral;
section->MVr -= frame->MVr;
section->mvr_abs -= frame->mvr_abs;
section->MVc -= frame->MVc;
section->mvc_abs -= frame->mvc_abs;
section->MVrv -= frame->MVrv;
section->MVcv -= frame->MVcv;
section->mv_in_out_count -= frame->mv_in_out_count;
section->new_mv_count -= frame->new_mv_count;
section->count -= frame->count;
section->duration -= frame->duration;
}
// Calculate a modified Error used in distributing bits between easier and
// harder frames.
static double calculate_modified_err(const TWO_PASS *twopass,
const VP9EncoderConfig *oxcf,
const FIRSTPASS_STATS *this_frame) {
const FIRSTPASS_STATS *const stats = &twopass->total_stats;
const double av_err = stats->coded_error / stats->count;
const double modified_error = av_err *
pow(this_frame->coded_error / DOUBLE_DIVIDE_CHECK(av_err),
oxcf->two_pass_vbrbias / 100.0);
return fclamp(modified_error,
twopass->modified_error_min, twopass->modified_error_max);
}
// This function returns the maximum target rate per frame.
static int frame_max_bits(const RATE_CONTROL *rc,
const VP9EncoderConfig *oxcf) {
int64_t max_bits = ((int64_t)rc->avg_frame_bandwidth *
(int64_t)oxcf->two_pass_vbrmax_section) / 100;
if (max_bits < 0)
max_bits = 0;
else if (max_bits > rc->max_frame_bandwidth)
max_bits = rc->max_frame_bandwidth;
return (int)max_bits;
}
void vp9_init_first_pass(VP9_COMP *cpi) {
zero_stats(&cpi->twopass.total_stats);
}
void vp9_end_first_pass(VP9_COMP *cpi) {
if (is_two_pass_svc(cpi)) {
int i;
for (i = 0; i < cpi->svc.number_spatial_layers; ++i) {
output_stats(&cpi->svc.layer_context[i].twopass.total_stats,
cpi->output_pkt_list);
}
} else {
output_stats(&cpi->twopass.total_stats, cpi->output_pkt_list);
}
}
static vp9_variance_fn_t get_block_variance_fn(BLOCK_SIZE bsize) {
switch (bsize) {
case BLOCK_8X8:
return vp9_mse8x8;
case BLOCK_16X8:
return vp9_mse16x8;
case BLOCK_8X16:
return vp9_mse8x16;
default:
return vp9_mse16x16;
}
}
static unsigned int get_prediction_error(BLOCK_SIZE bsize,
const struct buf_2d *src,
const struct buf_2d *ref) {
unsigned int sse;
const vp9_variance_fn_t fn = get_block_variance_fn(bsize);
fn(src->buf, src->stride, ref->buf, ref->stride, &sse);
return sse;
}
// Refine the motion search range according to the frame dimension
// for first pass test.
static int get_search_range(const VP9_COMMON *cm) {
int sr = 0;
const int dim = MIN(cm->width, cm->height);
while ((dim << sr) < MAX_FULL_PEL_VAL)
++sr;
return sr;
}
static void first_pass_motion_search(VP9_COMP *cpi, MACROBLOCK *x,
const MV *ref_mv, MV *best_mv,
int *best_motion_err) {
MACROBLOCKD *const xd = &x->e_mbd;
MV tmp_mv = {0, 0};
MV ref_mv_full = {ref_mv->row >> 3, ref_mv->col >> 3};
int num00, tmp_err, n;
const BLOCK_SIZE bsize = xd->mi[0]->mbmi.sb_type;
vp9_variance_fn_ptr_t v_fn_ptr = cpi->fn_ptr[bsize];
const int new_mv_mode_penalty = 256;
int step_param = 3;
int further_steps = (MAX_MVSEARCH_STEPS - 1) - step_param;
const int sr = get_search_range(&cpi->common);
step_param += sr;
further_steps -= sr;
// Override the default variance function to use MSE.
v_fn_ptr.vf = get_block_variance_fn(bsize);
// Center the initial step/diamond search on best mv.
tmp_err = cpi->diamond_search_sad(x, &cpi->ss_cfg, &ref_mv_full, &tmp_mv,
step_param,
x->sadperbit16, &num00, &v_fn_ptr, ref_mv);
if (tmp_err < INT_MAX)
tmp_err = vp9_get_mvpred_var(x, &tmp_mv, ref_mv, &v_fn_ptr, 1);
if (tmp_err < INT_MAX - new_mv_mode_penalty)
tmp_err += new_mv_mode_penalty;
if (tmp_err < *best_motion_err) {
*best_motion_err = tmp_err;
*best_mv = tmp_mv;
}
// Carry out further step/diamond searches as necessary.
n = num00;
num00 = 0;
while (n < further_steps) {
++n;
if (num00) {
--num00;
} else {
tmp_err = cpi->diamond_search_sad(x, &cpi->ss_cfg, &ref_mv_full, &tmp_mv,
step_param + n, x->sadperbit16,
&num00, &v_fn_ptr, ref_mv);
if (tmp_err < INT_MAX)
tmp_err = vp9_get_mvpred_var(x, &tmp_mv, ref_mv, &v_fn_ptr, 1);
if (tmp_err < INT_MAX - new_mv_mode_penalty)
tmp_err += new_mv_mode_penalty;
if (tmp_err < *best_motion_err) {
*best_motion_err = tmp_err;
*best_mv = tmp_mv;
}
}
}
}
static BLOCK_SIZE get_bsize(const VP9_COMMON *cm, int mb_row, int mb_col) {
if (2 * mb_col + 1 < cm->mi_cols) {
return 2 * mb_row + 1 < cm->mi_rows ? BLOCK_16X16
: BLOCK_16X8;
} else {
return 2 * mb_row + 1 < cm->mi_rows ? BLOCK_8X16
: BLOCK_8X8;
}
}
static int find_fp_qindex() {
int i;
for (i = 0; i < QINDEX_RANGE; ++i)
if (vp9_convert_qindex_to_q(i) >= 30.0)
break;
if (i == QINDEX_RANGE)
i--;
return i;
}
static void set_first_pass_params(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
if (!cpi->refresh_alt_ref_frame &&
(cm->current_video_frame == 0 ||
(cpi->frame_flags & FRAMEFLAGS_KEY))) {
cm->frame_type = KEY_FRAME;
} else {
cm->frame_type = INTER_FRAME;
}
// Do not use periodic key frames.
cpi->rc.frames_to_key = INT_MAX;
}
void vp9_first_pass(VP9_COMP *cpi, const struct lookahead_entry *source) {
int mb_row, mb_col;
MACROBLOCK *const x = &cpi->mb;
VP9_COMMON *const cm = &cpi->common;
MACROBLOCKD *const xd = &x->e_mbd;
TileInfo tile;
struct macroblock_plane *const p = x->plane;
struct macroblockd_plane *const pd = xd->plane;
const PICK_MODE_CONTEXT *ctx = &cpi->pc_root->none;
int i;
int recon_yoffset, recon_uvoffset;
YV12_BUFFER_CONFIG *const lst_yv12 = get_ref_frame_buffer(cpi, LAST_FRAME);
YV12_BUFFER_CONFIG *gld_yv12 = get_ref_frame_buffer(cpi, GOLDEN_FRAME);
YV12_BUFFER_CONFIG *const new_yv12 = get_frame_new_buffer(cm);
int recon_y_stride = lst_yv12->y_stride;
int recon_uv_stride = lst_yv12->uv_stride;
int uv_mb_height = 16 >> (lst_yv12->y_height > lst_yv12->uv_height);
int64_t intra_error = 0;
int64_t coded_error = 0;
int64_t sr_coded_error = 0;
int sum_mvr = 0, sum_mvc = 0;
int sum_mvr_abs = 0, sum_mvc_abs = 0;
int64_t sum_mvrs = 0, sum_mvcs = 0;
int mvcount = 0;
int intercount = 0;
int second_ref_count = 0;
int intrapenalty = 256;
int neutral_count = 0;
int new_mv_count = 0;
int sum_in_vectors = 0;
MV lastmv = {0, 0};
TWO_PASS *twopass = &cpi->twopass;
const MV zero_mv = {0, 0};
const YV12_BUFFER_CONFIG *first_ref_buf = lst_yv12;
LAYER_CONTEXT *const lc = is_two_pass_svc(cpi) ?
&cpi->svc.layer_context[cpi->svc.spatial_layer_id] : NULL;
#if CONFIG_FP_MB_STATS
if (cpi->use_fp_mb_stats) {
vp9_zero_array(cpi->twopass.frame_mb_stats_buf, cm->MBs);
}
#endif
vp9_clear_system_state();
set_first_pass_params(cpi);
vp9_set_quantizer(cm, find_fp_qindex());
if (lc != NULL) {
MV_REFERENCE_FRAME ref_frame = LAST_FRAME;
twopass = &lc->twopass;
if (cpi->common.current_video_frame == 0) {
cpi->ref_frame_flags = 0;
} else {
if (lc->current_video_frame_in_layer <
(unsigned int)cpi->svc.number_temporal_layers)
cpi->ref_frame_flags = VP9_GOLD_FLAG;
else
cpi->ref_frame_flags = VP9_LAST_FLAG | VP9_GOLD_FLAG;
}
vp9_scale_references(cpi);
// Use either last frame or alt frame for motion search.
if (cpi->ref_frame_flags & VP9_LAST_FLAG) {
first_ref_buf = vp9_get_scaled_ref_frame(cpi, LAST_FRAME);
ref_frame = LAST_FRAME;
if (first_ref_buf == NULL)
first_ref_buf = get_ref_frame_buffer(cpi, LAST_FRAME);
} else if (cpi->ref_frame_flags & VP9_GOLD_FLAG) {
first_ref_buf = vp9_get_scaled_ref_frame(cpi, GOLDEN_FRAME);
ref_frame = GOLDEN_FRAME;
if (first_ref_buf == NULL)
first_ref_buf = get_ref_frame_buffer(cpi, GOLDEN_FRAME);
}
recon_y_stride = new_yv12->y_stride;
recon_uv_stride = new_yv12->uv_stride;
uv_mb_height = 16 >> (new_yv12->y_height > new_yv12->uv_height);
// Disable golden frame for svc first pass for now.
gld_yv12 = NULL;
set_ref_ptrs(cm, xd, ref_frame, NONE);
cpi->Source = vp9_scale_if_required(cm, cpi->un_scaled_source,
&cpi->scaled_source);
}
vp9_setup_block_planes(&x->e_mbd, cm->subsampling_x, cm->subsampling_y);
vp9_setup_src_planes(x, cpi->Source, 0, 0);
vp9_setup_pre_planes(xd, 0, first_ref_buf, 0, 0, NULL);
vp9_setup_dst_planes(xd->plane, new_yv12, 0, 0);
xd->mi = cm->mi_grid_visible;
xd->mi[0] = cm->mi;
vp9_frame_init_quantizer(cpi);
for (i = 0; i < MAX_MB_PLANE; ++i) {
p[i].coeff = ctx->coeff_pbuf[i][1];
p[i].qcoeff = ctx->qcoeff_pbuf[i][1];
pd[i].dqcoeff = ctx->dqcoeff_pbuf[i][1];
p[i].eobs = ctx->eobs_pbuf[i][1];
}
x->skip_recode = 0;
vp9_init_mv_probs(cm);
vp9_initialize_rd_consts(cpi);
// Tiling is ignored in the first pass.
vp9_tile_init(&tile, cm, 0, 0);
for (mb_row = 0; mb_row < cm->mb_rows; ++mb_row) {
MV best_ref_mv = {0, 0};
// Reset above block coeffs.
xd->up_available = (mb_row != 0);
recon_yoffset = (mb_row * recon_y_stride * 16);
recon_uvoffset = (mb_row * recon_uv_stride * uv_mb_height);
// Set up limit values for motion vectors to prevent them extending
// outside the UMV borders.
x->mv_row_min = -((mb_row * 16) + BORDER_MV_PIXELS_B16);
x->mv_row_max = ((cm->mb_rows - 1 - mb_row) * 16)
+ BORDER_MV_PIXELS_B16;
for (mb_col = 0; mb_col < cm->mb_cols; ++mb_col) {
int this_error;
const int use_dc_pred = (mb_col || mb_row) && (!mb_col || !mb_row);
double error_weight = 1.0;
const BLOCK_SIZE bsize = get_bsize(cm, mb_row, mb_col);
#if CONFIG_FP_MB_STATS
const int mb_index = mb_row * cm->mb_cols + mb_col;
#endif
vp9_clear_system_state();
xd->plane[0].dst.buf = new_yv12->y_buffer + recon_yoffset;
xd->plane[1].dst.buf = new_yv12->u_buffer + recon_uvoffset;
xd->plane[2].dst.buf = new_yv12->v_buffer + recon_uvoffset;
xd->left_available = (mb_col != 0);
xd->mi[0]->mbmi.sb_type = bsize;
xd->mi[0]->mbmi.ref_frame[0] = INTRA_FRAME;
set_mi_row_col(xd, &tile,
mb_row << 1, num_8x8_blocks_high_lookup[bsize],
mb_col << 1, num_8x8_blocks_wide_lookup[bsize],
cm->mi_rows, cm->mi_cols);
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
const int energy = vp9_block_energy(cpi, x, bsize);
error_weight = vp9_vaq_inv_q_ratio(energy);
}
// Do intra 16x16 prediction.
x->skip_encode = 0;
xd->mi[0]->mbmi.mode = DC_PRED;
xd->mi[0]->mbmi.tx_size = use_dc_pred ?
(bsize >= BLOCK_16X16 ? TX_16X16 : TX_8X8) : TX_4X4;
vp9_encode_intra_block_plane(x, bsize, 0);
this_error = vp9_get_mb_ss(x->plane[0].src_diff);
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
vp9_clear_system_state();
this_error = (int)(this_error * error_weight);
}
// Intrapenalty below deals with situations where the intra and inter
// error scores are very low (e.g. a plain black frame).
// We do not have special cases in first pass for 0,0 and nearest etc so
// all inter modes carry an overhead cost estimate for the mv.
// When the error score is very low this causes us to pick all or lots of
// INTRA modes and throw lots of key frames.
// This penalty adds a cost matching that of a 0,0 mv to the intra case.
this_error += intrapenalty;
// Accumulate the intra error.
intra_error += (int64_t)this_error;
#if CONFIG_FP_MB_STATS
if (cpi->use_fp_mb_stats) {
// initialization
cpi->twopass.frame_mb_stats_buf[mb_index] = 0;
}
#endif
// Set up limit values for motion vectors to prevent them extending
// outside the UMV borders.
x->mv_col_min = -((mb_col * 16) + BORDER_MV_PIXELS_B16);
x->mv_col_max = ((cm->mb_cols - 1 - mb_col) * 16) + BORDER_MV_PIXELS_B16;
// Other than for the first frame do a motion search.
if (cm->current_video_frame > 0) {
int tmp_err, motion_error, raw_motion_error;
// Assume 0,0 motion with no mv overhead.
MV mv = {0, 0} , tmp_mv = {0, 0};
struct buf_2d unscaled_last_source_buf_2d;
xd->plane[0].pre[0].buf = first_ref_buf->y_buffer + recon_yoffset;
motion_error = get_prediction_error(bsize, &x->plane[0].src,
&xd->plane[0].pre[0]);
// Compute the motion error of the 0,0 motion using the last source
// frame as the reference. Skip the further motion search on
// reconstructed frame if this error is small.
unscaled_last_source_buf_2d.buf =
cpi->unscaled_last_source->y_buffer + recon_yoffset;
unscaled_last_source_buf_2d.stride =
cpi->unscaled_last_source->y_stride;
raw_motion_error = get_prediction_error(bsize, &x->plane[0].src,
&unscaled_last_source_buf_2d);
// TODO(pengchong): Replace the hard-coded threshold
if (raw_motion_error > 25 || lc != NULL) {
// Test last reference frame using the previous best mv as the
// starting point (best reference) for the search.
first_pass_motion_search(cpi, x, &best_ref_mv, &mv, &motion_error);
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
vp9_clear_system_state();
motion_error = (int)(motion_error * error_weight);
}
// If the current best reference mv is not centered on 0,0 then do a
// 0,0 based search as well.
if (!is_zero_mv(&best_ref_mv)) {
tmp_err = INT_MAX;
first_pass_motion_search(cpi, x, &zero_mv, &tmp_mv, &tmp_err);
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
vp9_clear_system_state();
tmp_err = (int)(tmp_err * error_weight);
}
if (tmp_err < motion_error) {
motion_error = tmp_err;
mv = tmp_mv;
}
}
// Search in an older reference frame.
if (cm->current_video_frame > 1 && gld_yv12 != NULL) {
// Assume 0,0 motion with no mv overhead.
int gf_motion_error;
xd->plane[0].pre[0].buf = gld_yv12->y_buffer + recon_yoffset;
gf_motion_error = get_prediction_error(bsize, &x->plane[0].src,
&xd->plane[0].pre[0]);
first_pass_motion_search(cpi, x, &zero_mv, &tmp_mv,
&gf_motion_error);
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
vp9_clear_system_state();
gf_motion_error = (int)(gf_motion_error * error_weight);
}
if (gf_motion_error < motion_error && gf_motion_error < this_error)
++second_ref_count;
// Reset to last frame as reference buffer.
xd->plane[0].pre[0].buf = first_ref_buf->y_buffer + recon_yoffset;
xd->plane[1].pre[0].buf = first_ref_buf->u_buffer + recon_uvoffset;
xd->plane[2].pre[0].buf = first_ref_buf->v_buffer + recon_uvoffset;
// In accumulating a score for the older reference frame take the
// best of the motion predicted score and the intra coded error
// (just as will be done for) accumulation of "coded_error" for
// the last frame.
if (gf_motion_error < this_error)
sr_coded_error += gf_motion_error;
else
sr_coded_error += this_error;
} else {
sr_coded_error += motion_error;
}
} else {
sr_coded_error += motion_error;
}
// Start by assuming that intra mode is best.
best_ref_mv.row = 0;
best_ref_mv.col = 0;
#if CONFIG_FP_MB_STATS
if (cpi->use_fp_mb_stats) {
// intra predication statistics
cpi->twopass.frame_mb_stats_buf[mb_index] = 0;
cpi->twopass.frame_mb_stats_buf[mb_index] |= FPMB_DCINTRA_MASK;
cpi->twopass.frame_mb_stats_buf[mb_index] |= FPMB_MOTION_ZERO_MASK;
if (this_error > FPMB_ERROR_LARGE_TH) {
cpi->twopass.frame_mb_stats_buf[mb_index] |= FPMB_ERROR_LARGE_MASK;
} else if (this_error < FPMB_ERROR_SMALL_TH) {
cpi->twopass.frame_mb_stats_buf[mb_index] |= FPMB_ERROR_SMALL_MASK;
}
}
#endif
if (motion_error <= this_error) {
// Keep a count of cases where the inter and intra were very close
// and very low. This helps with scene cut detection for example in
// cropped clips with black bars at the sides or top and bottom.
if (((this_error - intrapenalty) * 9 <= motion_error * 10) &&
this_error < 2 * intrapenalty)
++neutral_count;
mv.row *= 8;
mv.col *= 8;
this_error = motion_error;
xd->mi[0]->mbmi.mode = NEWMV;
xd->mi[0]->mbmi.mv[0].as_mv = mv;
xd->mi[0]->mbmi.tx_size = TX_4X4;
xd->mi[0]->mbmi.ref_frame[0] = LAST_FRAME;
xd->mi[0]->mbmi.ref_frame[1] = NONE;
vp9_build_inter_predictors_sby(xd, mb_row << 1, mb_col << 1, bsize);
vp9_encode_sby_pass1(x, bsize);
sum_mvr += mv.row;
sum_mvr_abs += abs(mv.row);
sum_mvc += mv.col;
sum_mvc_abs += abs(mv.col);
sum_mvrs += mv.row * mv.row;
sum_mvcs += mv.col * mv.col;
++intercount;
best_ref_mv = mv;
#if CONFIG_FP_MB_STATS
if (cpi->use_fp_mb_stats) {
// inter predication statistics
cpi->twopass.frame_mb_stats_buf[mb_index] = 0;
cpi->twopass.frame_mb_stats_buf[mb_index] &= ~FPMB_DCINTRA_MASK;
cpi->twopass.frame_mb_stats_buf[mb_index] |= FPMB_MOTION_ZERO_MASK;
if (this_error > FPMB_ERROR_LARGE_TH) {
cpi->twopass.frame_mb_stats_buf[mb_index] |=
FPMB_ERROR_LARGE_MASK;
} else if (this_error < FPMB_ERROR_SMALL_TH) {
cpi->twopass.frame_mb_stats_buf[mb_index] |=
FPMB_ERROR_SMALL_MASK;
}
}
#endif
if (!is_zero_mv(&mv)) {
++mvcount;
#if CONFIG_FP_MB_STATS
if (cpi->use_fp_mb_stats) {
cpi->twopass.frame_mb_stats_buf[mb_index] &=
~FPMB_MOTION_ZERO_MASK;
// check estimated motion direction
if (mv.as_mv.col > 0 && mv.as_mv.col >= abs(mv.as_mv.row)) {
// right direction
cpi->twopass.frame_mb_stats_buf[mb_index] |=
FPMB_MOTION_RIGHT_MASK;
} else if (mv.as_mv.row < 0 &&
abs(mv.as_mv.row) >= abs(mv.as_mv.col)) {
// up direction
cpi->twopass.frame_mb_stats_buf[mb_index] |=
FPMB_MOTION_UP_MASK;
} else if (mv.as_mv.col < 0 &&
abs(mv.as_mv.col) >= abs(mv.as_mv.row)) {
// left direction
cpi->twopass.frame_mb_stats_buf[mb_index] |=
FPMB_MOTION_LEFT_MASK;
} else {
// down direction
cpi->twopass.frame_mb_stats_buf[mb_index] |=
FPMB_MOTION_DOWN_MASK;
}
}
#endif
// Non-zero vector, was it different from the last non zero vector?
if (!is_equal_mv(&mv, &lastmv))
++new_mv_count;
lastmv = mv;
// Does the row vector point inwards or outwards?
if (mb_row < cm->mb_rows / 2) {
if (mv.row > 0)
--sum_in_vectors;
else if (mv.row < 0)
++sum_in_vectors;
} else if (mb_row > cm->mb_rows / 2) {
if (mv.row > 0)
++sum_in_vectors;
else if (mv.row < 0)
--sum_in_vectors;
}
// Does the col vector point inwards or outwards?
if (mb_col < cm->mb_cols / 2) {
if (mv.col > 0)
--sum_in_vectors;
else if (mv.col < 0)
++sum_in_vectors;
} else if (mb_col > cm->mb_cols / 2) {
if (mv.col > 0)
++sum_in_vectors;
else if (mv.col < 0)
--sum_in_vectors;
}
}
}
} else {
sr_coded_error += (int64_t)this_error;
}
coded_error += (int64_t)this_error;
// Adjust to the next column of MBs.
x->plane[0].src.buf += 16;
x->plane[1].src.buf += uv_mb_height;
x->plane[2].src.buf += uv_mb_height;
recon_yoffset += 16;
recon_uvoffset += uv_mb_height;
}
// Adjust to the next row of MBs.
x->plane[0].src.buf += 16 * x->plane[0].src.stride - 16 * cm->mb_cols;
x->plane[1].src.buf += uv_mb_height * x->plane[1].src.stride -
uv_mb_height * cm->mb_cols;
x->plane[2].src.buf += uv_mb_height * x->plane[1].src.stride -
uv_mb_height * cm->mb_cols;
vp9_clear_system_state();
}
vp9_clear_system_state();
{
FIRSTPASS_STATS fps;
fps.frame = cm->current_video_frame;
fps.spatial_layer_id = cpi->svc.spatial_layer_id;
fps.intra_error = (double)(intra_error >> 8);
fps.coded_error = (double)(coded_error >> 8);
fps.sr_coded_error = (double)(sr_coded_error >> 8);
fps.count = 1.0;
fps.pcnt_inter = (double)intercount / cm->MBs;
fps.pcnt_second_ref = (double)second_ref_count / cm->MBs;
fps.pcnt_neutral = (double)neutral_count / cm->MBs;
if (mvcount > 0) {
fps.MVr = (double)sum_mvr / mvcount;
fps.mvr_abs = (double)sum_mvr_abs / mvcount;
fps.MVc = (double)sum_mvc / mvcount;
fps.mvc_abs = (double)sum_mvc_abs / mvcount;
fps.MVrv = ((double)sum_mvrs - (fps.MVr * fps.MVr / mvcount)) / mvcount;
fps.MVcv = ((double)sum_mvcs - (fps.MVc * fps.MVc / mvcount)) / mvcount;
fps.mv_in_out_count = (double)sum_in_vectors / (mvcount * 2);
fps.new_mv_count = new_mv_count;
fps.pcnt_motion = (double)mvcount / cm->MBs;
} else {
fps.MVr = 0.0;
fps.mvr_abs = 0.0;
fps.MVc = 0.0;
fps.mvc_abs = 0.0;
fps.MVrv = 0.0;
fps.MVcv = 0.0;
fps.mv_in_out_count = 0.0;
fps.new_mv_count = 0.0;
fps.pcnt_motion = 0.0;
}
// TODO(paulwilkins): Handle the case when duration is set to 0, or
// something less than the full time between subsequent values of
// cpi->source_time_stamp.
fps.duration = (double)(source->ts_end - source->ts_start);
// Don't want to do output stats with a stack variable!
twopass->this_frame_stats = fps;
output_stats(&twopass->this_frame_stats, cpi->output_pkt_list);
accumulate_stats(&twopass->total_stats, &fps);
#if CONFIG_FP_MB_STATS
if (cpi->use_fp_mb_stats) {
output_fpmb_stats(twopass->frame_mb_stats_buf, cm, cpi->output_pkt_list);
}
#endif
}
// Copy the previous Last Frame back into gf and and arf buffers if
// the prediction is good enough... but also don't allow it to lag too far.
if ((twopass->sr_update_lag > 3) ||
((cm->current_video_frame > 0) &&
(twopass->this_frame_stats.pcnt_inter > 0.20) &&
((twopass->this_frame_stats.intra_error /
DOUBLE_DIVIDE_CHECK(twopass->this_frame_stats.coded_error)) > 2.0))) {
if (gld_yv12 != NULL) {
vp8_yv12_copy_frame(lst_yv12, gld_yv12);
}
twopass->sr_update_lag = 1;
} else {
++twopass->sr_update_lag;
}
vp9_extend_frame_borders(new_yv12);
if (lc != NULL) {
vp9_update_reference_frames(cpi);
} else {
// Swap frame pointers so last frame refers to the frame we just compressed.
swap_yv12(lst_yv12, new_yv12);
}
// Special case for the first frame. Copy into the GF buffer as a second
// reference.
if (cm->current_video_frame == 0 && gld_yv12 != NULL) {
vp8_yv12_copy_frame(lst_yv12, gld_yv12);
}
// Use this to see what the first pass reconstruction looks like.
if (0) {
char filename[512];
FILE *recon_file;
snprintf(filename, sizeof(filename), "enc%04d.yuv",
(int)cm->current_video_frame);
if (cm->current_video_frame == 0)
recon_file = fopen(filename, "wb");
else
recon_file = fopen(filename, "ab");
(void)fwrite(lst_yv12->buffer_alloc, lst_yv12->frame_size, 1, recon_file);
fclose(recon_file);
}
++cm->current_video_frame;
if (cpi->use_svc)
vp9_inc_frame_in_layer(cpi);
}
static double calc_correction_factor(double err_per_mb,
double err_divisor,
double pt_low,
double pt_high,
int q) {
const double error_term = err_per_mb / err_divisor;
// Adjustment based on actual quantizer to power term.
const double power_term = MIN(vp9_convert_qindex_to_q(q) * 0.0125 + pt_low,
pt_high);
// Calculate correction factor.
if (power_term < 1.0)
assert(error_term >= 0.0);
return fclamp(pow(error_term, power_term), 0.05, 5.0);
}
static int get_twopass_worst_quality(const VP9_COMP *cpi,
const FIRSTPASS_STATS *stats,
int section_target_bandwidth) {
const RATE_CONTROL *const rc = &cpi->rc;
const VP9EncoderConfig *const oxcf = &cpi->oxcf;
if (section_target_bandwidth <= 0) {
return rc->worst_quality; // Highest value allowed
} else {
const int num_mbs = cpi->common.MBs;
const double section_err = stats->coded_error / stats->count;
const double err_per_mb = section_err / num_mbs;
const double speed_term = 1.0 + 0.04 * oxcf->speed;
const int target_norm_bits_per_mb = ((uint64_t)section_target_bandwidth <<
BPER_MB_NORMBITS) / num_mbs;
int q;
int is_svc_upper_layer = 0;
if (is_two_pass_svc(cpi) && cpi->svc.spatial_layer_id > 0)
is_svc_upper_layer = 1;
// Try and pick a max Q that will be high enough to encode the
// content at the given rate.
for (q = rc->best_quality; q < rc->worst_quality; ++q) {
const double factor =
calc_correction_factor(err_per_mb, ERR_DIVISOR,
is_svc_upper_layer ? SVC_FACTOR_PT_LOW :
FACTOR_PT_LOW, FACTOR_PT_HIGH, q);
const int bits_per_mb = vp9_rc_bits_per_mb(INTER_FRAME, q,
factor * speed_term);
if (bits_per_mb <= target_norm_bits_per_mb)
break;
}
// Restriction on active max q for constrained quality mode.
if (cpi->oxcf.rc_mode == VPX_CQ)
q = MAX(q, oxcf->cq_level);
return q;
}
}
extern void vp9_new_framerate(VP9_COMP *cpi, double framerate);
void vp9_init_second_pass(VP9_COMP *cpi) {
SVC *const svc = &cpi->svc;
const VP9EncoderConfig *const oxcf = &cpi->oxcf;
const int is_two_pass_svc = (svc->number_spatial_layers > 1) ||
(svc->number_temporal_layers > 1);
TWO_PASS *const twopass = is_two_pass_svc ?
&svc->layer_context[svc->spatial_layer_id].twopass : &cpi->twopass;
double frame_rate;
FIRSTPASS_STATS *stats;
zero_stats(&twopass->total_stats);
zero_stats(&twopass->total_left_stats);
if (!twopass->stats_in_end)
return;
stats = &twopass->total_stats;
*stats = *twopass->stats_in_end;
twopass->total_left_stats = *stats;
frame_rate = 10000000.0 * stats->count / stats->duration;
// Each frame can have a different duration, as the frame rate in the source
// isn't guaranteed to be constant. The frame rate prior to the first frame
// encoded in the second pass is a guess. However, the sum duration is not.
// It is calculated based on the actual durations of all frames from the
// first pass.
if (is_two_pass_svc) {
vp9_update_spatial_layer_framerate(cpi, frame_rate);
twopass->bits_left = (int64_t)(stats->duration *
svc->layer_context[svc->spatial_layer_id].target_bandwidth /
10000000.0);
} else {
vp9_new_framerate(cpi, frame_rate);
twopass->bits_left = (int64_t)(stats->duration * oxcf->target_bandwidth /
10000000.0);
}
// Calculate a minimum intra value to be used in determining the IIratio
// scores used in the second pass. We have this minimum to make sure
// that clips that are static but "low complexity" in the intra domain
// are still boosted appropriately for KF/GF/ARF.
if (!is_two_pass_svc) {
// We don't know the number of MBs for each layer at this point.
// So we will do it later.
twopass->kf_intra_err_min = KF_MB_INTRA_MIN * cpi->common.MBs;
twopass->gf_intra_err_min = GF_MB_INTRA_MIN * cpi->common.MBs;
}
// This variable monitors how far behind the second ref update is lagging.
twopass->sr_update_lag = 1;
// Scan the first pass file and calculate a modified total error based upon
// the bias/power function used to allocate bits.
{
const double avg_error = stats->coded_error /
DOUBLE_DIVIDE_CHECK(stats->count);
const FIRSTPASS_STATS *s = twopass->stats_in;
double modified_error_total = 0.0;
twopass->modified_error_min = (avg_error *
oxcf->two_pass_vbrmin_section) / 100;
twopass->modified_error_max = (avg_error *
oxcf->two_pass_vbrmax_section) / 100;
while (s < twopass->stats_in_end) {
modified_error_total += calculate_modified_err(twopass, oxcf, s);
++s;
}
twopass->modified_error_left = modified_error_total;
}
// Reset the vbr bits off target counter
cpi->rc.vbr_bits_off_target = 0;
}
// This function gives an estimate of how badly we believe the prediction
// quality is decaying from frame to frame.
static double get_prediction_decay_rate(const VP9_COMMON *cm,
const FIRSTPASS_STATS *next_frame) {
// Look at the observed drop in prediction quality between the last frame
// and the GF buffer (which contains an older frame).
const double mb_sr_err_diff = (next_frame->sr_coded_error -
next_frame->coded_error) / cm->MBs;
const double second_ref_decay = mb_sr_err_diff <= 512.0
? fclamp(pow(1.0 - (mb_sr_err_diff / 512.0), 0.5), 0.85, 1.0)
: 0.85;
return MIN(second_ref_decay, next_frame->pcnt_inter);
}
// This function gives an estimate of how badly we believe the prediction
// quality is decaying from frame to frame.
static double get_zero_motion_factor(const FIRSTPASS_STATS *frame) {
const double sr_ratio = frame->coded_error /
DOUBLE_DIVIDE_CHECK(frame->sr_coded_error);
const double zero_motion_pct = frame->pcnt_inter -
frame->pcnt_motion;
return MIN(sr_ratio, zero_motion_pct);
}
// Function to test for a condition where a complex transition is followed
// by a static section. For example in slide shows where there is a fade
// between slides. This is to help with more optimal kf and gf positioning.
static int detect_transition_to_still(const TWO_PASS *twopass,
int frame_interval, int still_interval,
double loop_decay_rate,
double last_decay_rate) {
// Break clause to detect very still sections after motion
// For example a static image after a fade or other transition
// instead of a clean scene cut.
if (frame_interval > MIN_GF_INTERVAL &&
loop_decay_rate >= 0.999 &&
last_decay_rate < 0.9) {
int j;
// Look ahead a few frames to see if static condition persists...
for (j = 0; j < still_interval; ++j) {
const FIRSTPASS_STATS *stats = &twopass->stats_in[j];
if (stats >= twopass->stats_in_end)
break;
if (stats->pcnt_inter - stats->pcnt_motion < 0.999)
break;
}
// Only if it does do we signal a transition to still.
return j == still_interval;
}
return 0;
}
// This function detects a flash through the high relative pcnt_second_ref
// score in the frame following a flash frame. The offset passed in should
// reflect this.
static int detect_flash(const TWO_PASS *twopass, int offset) {
const FIRSTPASS_STATS *const next_frame = read_frame_stats(twopass, offset);
// What we are looking for here is a situation where there is a
// brief break in prediction (such as a flash) but subsequent frames
// are reasonably well predicted by an earlier (pre flash) frame.
// The recovery after a flash is indicated by a high pcnt_second_ref
// compared to pcnt_inter.
return next_frame != NULL &&
next_frame->pcnt_second_ref > next_frame->pcnt_inter &&
next_frame->pcnt_second_ref >= 0.5;
}
// Update the motion related elements to the GF arf boost calculation.
static void accumulate_frame_motion_stats(const FIRSTPASS_STATS *stats,
double *mv_in_out,
double *mv_in_out_accumulator,
double *abs_mv_in_out_accumulator,
double *mv_ratio_accumulator) {
const double pct = stats->pcnt_motion;
// Accumulate Motion In/Out of frame stats.
*mv_in_out = stats->mv_in_out_count * pct;
*mv_in_out_accumulator += *mv_in_out;
*abs_mv_in_out_accumulator += fabs(*mv_in_out);
// Accumulate a measure of how uniform (or conversely how random) the motion
// field is (a ratio of abs(mv) / mv).
if (pct > 0.05) {
const double mvr_ratio = fabs(stats->mvr_abs) /
DOUBLE_DIVIDE_CHECK(fabs(stats->MVr));
const double mvc_ratio = fabs(stats->mvc_abs) /
DOUBLE_DIVIDE_CHECK(fabs(stats->MVc));
*mv_ratio_accumulator += pct * (mvr_ratio < stats->mvr_abs ?
mvr_ratio : stats->mvr_abs);
*mv_ratio_accumulator += pct * (mvc_ratio < stats->mvc_abs ?
mvc_ratio : stats->mvc_abs);
}
}
// Calculate a baseline boost number for the current frame.
static double calc_frame_boost(const TWO_PASS *twopass,
const FIRSTPASS_STATS *this_frame,
double this_frame_mv_in_out) {
double frame_boost;
// Underlying boost factor is based on inter intra error ratio.
if (this_frame->intra_error > twopass->gf_intra_err_min)
frame_boost = (IIFACTOR * this_frame->intra_error /
DOUBLE_DIVIDE_CHECK(this_frame->coded_error));
else
frame_boost = (IIFACTOR * twopass->gf_intra_err_min /
DOUBLE_DIVIDE_CHECK(this_frame->coded_error));
// Increase boost for frames where new data coming into frame (e.g. zoom out).
// Slightly reduce boost if there is a net balance of motion out of the frame
// (zoom in). The range for this_frame_mv_in_out is -1.0 to +1.0.
if (this_frame_mv_in_out > 0.0)
frame_boost += frame_boost * (this_frame_mv_in_out * 2.0);
// In the extreme case the boost is halved.
else
frame_boost += frame_boost * (this_frame_mv_in_out / 2.0);
return MIN(frame_boost, GF_RMAX);
}
static int calc_arf_boost(VP9_COMP *cpi, int offset,
int f_frames, int b_frames,
int *f_boost, int *b_boost) {
TWO_PASS *const twopass = &cpi->twopass;
int i;
double boost_score = 0.0;
double mv_ratio_accumulator = 0.0;
double decay_accumulator = 1.0;
double this_frame_mv_in_out = 0.0;
double mv_in_out_accumulator = 0.0;
double abs_mv_in_out_accumulator = 0.0;
int arf_boost;
int flash_detected = 0;
// Search forward from the proposed arf/next gf position.
for (i = 0; i < f_frames; ++i) {
const FIRSTPASS_STATS *this_frame = read_frame_stats(twopass, i + offset);
if (this_frame == NULL)
break;
// Update the motion related elements to the boost calculation.
accumulate_frame_motion_stats(this_frame,
&this_frame_mv_in_out, &mv_in_out_accumulator,
&abs_mv_in_out_accumulator,
&mv_ratio_accumulator);
// We want to discount the flash frame itself and the recovery
// frame that follows as both will have poor scores.
flash_detected = detect_flash(twopass, i + offset) ||
detect_flash(twopass, i + offset + 1);
// Accumulate the effect of prediction quality decay.
if (!flash_detected) {
decay_accumulator *= get_prediction_decay_rate(&cpi->common, this_frame);
decay_accumulator = decay_accumulator < MIN_DECAY_FACTOR
? MIN_DECAY_FACTOR : decay_accumulator;
}
boost_score += decay_accumulator * calc_frame_boost(twopass, this_frame,
this_frame_mv_in_out);
}
*f_boost = (int)boost_score;
// Reset for backward looking loop.
boost_score = 0.0;
mv_ratio_accumulator = 0.0;
decay_accumulator = 1.0;
this_frame_mv_in_out = 0.0;
mv_in_out_accumulator = 0.0;
abs_mv_in_out_accumulator = 0.0;
// Search backward towards last gf position.
for (i = -1; i >= -b_frames; --i) {
const FIRSTPASS_STATS *this_frame = read_frame_stats(twopass, i + offset);
if (this_frame == NULL)
break;
// Update the motion related elements to the boost calculation.
accumulate_frame_motion_stats(this_frame,
&this_frame_mv_in_out, &mv_in_out_accumulator,
&abs_mv_in_out_accumulator,
&mv_ratio_accumulator);
// We want to discount the the flash frame itself and the recovery
// frame that follows as both will have poor scores.
flash_detected = detect_flash(twopass, i + offset) ||
detect_flash(twopass, i + offset + 1);
// Cumulative effect of prediction quality decay.
if (!flash_detected) {
decay_accumulator *= get_prediction_decay_rate(&cpi->common, this_frame);
decay_accumulator = decay_accumulator < MIN_DECAY_FACTOR
? MIN_DECAY_FACTOR : decay_accumulator;
}
boost_score += decay_accumulator * calc_frame_boost(twopass, this_frame,
this_frame_mv_in_out);
}
*b_boost = (int)boost_score;
arf_boost = (*f_boost + *b_boost);
if (arf_boost < ((b_frames + f_frames) * 20))
arf_boost = ((b_frames + f_frames) * 20);
return arf_boost;
}
// Calculate a section intra ratio used in setting max loop filter.
static int calculate_section_intra_ratio(const FIRSTPASS_STATS *begin,
const FIRSTPASS_STATS *end,
int section_length) {
const FIRSTPASS_STATS *s = begin;
double intra_error = 0.0;
double coded_error = 0.0;
int i = 0;
while (s < end && i < section_length) {
intra_error += s->intra_error;
coded_error += s->coded_error;
++s;
++i;
}
return (int)(intra_error / DOUBLE_DIVIDE_CHECK(coded_error));
}
// Calculate the total bits to allocate in this GF/ARF group.
static int64_t calculate_total_gf_group_bits(VP9_COMP *cpi,
double gf_group_err) {
const RATE_CONTROL *const rc = &cpi->rc;
const TWO_PASS *const twopass = &cpi->twopass;
const int max_bits = frame_max_bits(rc, &cpi->oxcf);
int64_t total_group_bits;
// Calculate the bits to be allocated to the group as a whole.
if ((twopass->kf_group_bits > 0) && (twopass->kf_group_error_left > 0)) {
total_group_bits = (int64_t)(twopass->kf_group_bits *
(gf_group_err / twopass->kf_group_error_left));
} else {
total_group_bits = 0;
}
// Clamp odd edge cases.
total_group_bits = (total_group_bits < 0) ?
0 : (total_group_bits > twopass->kf_group_bits) ?
twopass->kf_group_bits : total_group_bits;
// Clip based on user supplied data rate variability limit.
if (total_group_bits > (int64_t)max_bits * rc->baseline_gf_interval)
total_group_bits = (int64_t)max_bits * rc->baseline_gf_interval;
return total_group_bits;
}
// Calculate the number bits extra to assign to boosted frames in a group.
static int calculate_boost_bits(int frame_count,
int boost, int64_t total_group_bits) {
int allocation_chunks;
// return 0 for invalid inputs (could arise e.g. through rounding errors)
if (!boost || (total_group_bits <= 0) || (frame_count <= 0) )
return 0;
allocation_chunks = (frame_count * 100) + boost;
// Prevent overflow.
if (boost > 1023) {
int divisor = boost >> 10;
boost /= divisor;
allocation_chunks /= divisor;
}
// Calculate the number of extra bits for use in the boosted frame or frames.
return MAX((int)(((int64_t)boost * total_group_bits) / allocation_chunks), 0);
}
// Current limit on maximum number of active arfs in a GF/ARF group.
#define MAX_ACTIVE_ARFS 2
#define ARF_SLOT1 2
#define ARF_SLOT2 3
// This function indirects the choice of buffers for arfs.
// At the moment the values are fixed but this may change as part of
// the integration process with other codec features that swap buffers around.
static void get_arf_buffer_indices(unsigned char *arf_buffer_indices) {
arf_buffer_indices[0] = ARF_SLOT1;
arf_buffer_indices[1] = ARF_SLOT2;
}
static void allocate_gf_group_bits(VP9_COMP *cpi, int64_t gf_group_bits,
double group_error, int gf_arf_bits) {
RATE_CONTROL *const rc = &cpi->rc;
const VP9EncoderConfig *const oxcf = &cpi->oxcf;
TWO_PASS *const twopass = &cpi->twopass;
GF_GROUP *const gf_group = &twopass->gf_group;
FIRSTPASS_STATS frame_stats;
int i;
int frame_index = 1;
int target_frame_size;
int key_frame;
const int max_bits = frame_max_bits(&cpi->rc, &cpi->oxcf);
int64_t total_group_bits = gf_group_bits;
double modified_err = 0.0;
double err_fraction;
int mid_boost_bits = 0;
int mid_frame_idx;
unsigned char arf_buffer_indices[MAX_ACTIVE_ARFS];
int alt_frame_index = frame_index;
int has_temporal_layers = is_two_pass_svc(cpi) &&
cpi->svc.number_temporal_layers > 1;
// Only encode alt reference frame in temporal base layer.
if (has_temporal_layers)
alt_frame_index = cpi->svc.number_temporal_layers;
key_frame = cpi->common.frame_type == KEY_FRAME ||
vp9_is_upper_layer_key_frame(cpi);
get_arf_buffer_indices(arf_buffer_indices);
// For key frames the frame target rate is already set and it
// is also the golden frame.
if (!key_frame) {
if (rc->source_alt_ref_active) {
gf_group->update_type[0] = OVERLAY_UPDATE;
gf_group->rf_level[0] = INTER_NORMAL;
gf_group->bit_allocation[0] = 0;
gf_group->arf_update_idx[0] = arf_buffer_indices[0];
gf_group->arf_ref_idx[0] = arf_buffer_indices[0];
} else {
gf_group->update_type[0] = GF_UPDATE;
gf_group->rf_level[0] = GF_ARF_STD;
gf_group->bit_allocation[0] = gf_arf_bits;
gf_group->arf_update_idx[0] = arf_buffer_indices[0];
gf_group->arf_ref_idx[0] = arf_buffer_indices[0];
}
// Step over the golden frame / overlay frame
if (EOF == input_stats(twopass, &frame_stats))
return;
}
// Deduct the boost bits for arf (or gf if it is not a key frame)
// from the group total.
if (rc->source_alt_ref_pending || !key_frame)
total_group_bits -= gf_arf_bits;
// Store the bits to spend on the ARF if there is one.
if (rc->source_alt_ref_pending) {
gf_group->update_type[alt_frame_index] = ARF_UPDATE;
gf_group->rf_level[alt_frame_index] = GF_ARF_STD;
gf_group->bit_allocation[alt_frame_index] = gf_arf_bits;
if (has_temporal_layers)
gf_group->arf_src_offset[alt_frame_index] =
(unsigned char)(rc->baseline_gf_interval -
cpi->svc.number_temporal_layers);
else
gf_group->arf_src_offset[alt_frame_index] =
(unsigned char)(rc->baseline_gf_interval - 1);
gf_group->arf_update_idx[alt_frame_index] = arf_buffer_indices[0];
gf_group->arf_ref_idx[alt_frame_index] =
arf_buffer_indices[cpi->multi_arf_last_grp_enabled &&
rc->source_alt_ref_active];
if (!has_temporal_layers)
++frame_index;
if (cpi->multi_arf_enabled) {
// Set aside a slot for a level 1 arf.
gf_group->update_type[frame_index] = ARF_UPDATE;
gf_group->rf_level[frame_index] = GF_ARF_LOW;
gf_group->arf_src_offset[frame_index] =
(unsigned char)((rc->baseline_gf_interval >> 1) - 1);
gf_group->arf_update_idx[frame_index] = arf_buffer_indices[1];
gf_group->arf_ref_idx[frame_index] = arf_buffer_indices[0];
++frame_index;
}
}
// Define middle frame
mid_frame_idx = frame_index + (rc->baseline_gf_interval >> 1) - 1;
// Allocate bits to the other frames in the group.
for (i = 0; i < rc->baseline_gf_interval - 1; ++i) {
int arf_idx = 0;
if (EOF == input_stats(twopass, &frame_stats))
break;
if (has_temporal_layers && frame_index == alt_frame_index) {
++frame_index;
}
modified_err = calculate_modified_err(twopass, oxcf, &frame_stats);
if (group_error > 0)
err_fraction = modified_err / DOUBLE_DIVIDE_CHECK(group_error);
else
err_fraction = 0.0;
target_frame_size = (int)((double)total_group_bits * err_fraction);
if (rc->source_alt_ref_pending && cpi->multi_arf_enabled) {
mid_boost_bits += (target_frame_size >> 4);
target_frame_size -= (target_frame_size >> 4);
if (frame_index <= mid_frame_idx)
arf_idx = 1;
}
gf_group->arf_update_idx[frame_index] = arf_buffer_indices[arf_idx];
gf_group->arf_ref_idx[frame_index] = arf_buffer_indices[arf_idx];
target_frame_size = clamp(target_frame_size, 0,
MIN(max_bits, (int)total_group_bits));
gf_group->update_type[frame_index] = LF_UPDATE;
gf_group->rf_level[frame_index] = INTER_NORMAL;
gf_group->bit_allocation[frame_index] = target_frame_size;
++frame_index;
}
// Note:
// We need to configure the frame at the end of the sequence + 1 that will be
// the start frame for the next group. Otherwise prior to the call to
// vp9_rc_get_second_pass_params() the data will be undefined.
gf_group->arf_update_idx[frame_index] = arf_buffer_indices[0];
gf_group->arf_ref_idx[frame_index] = arf_buffer_indices[0];
if (rc->source_alt_ref_pending) {
gf_group->update_type[frame_index] = OVERLAY_UPDATE;
gf_group->rf_level[frame_index] = INTER_NORMAL;
// Final setup for second arf and its overlay.
if (cpi->multi_arf_enabled) {
gf_group->bit_allocation[2] =
gf_group->bit_allocation[mid_frame_idx] + mid_boost_bits;
gf_group->update_type[mid_frame_idx] = OVERLAY_UPDATE;
gf_group->bit_allocation[mid_frame_idx] = 0;
}
} else {
gf_group->update_type[frame_index] = GF_UPDATE;
gf_group->rf_level[frame_index] = GF_ARF_STD;
}
// Note whether multi-arf was enabled this group for next time.
cpi->multi_arf_last_grp_enabled = cpi->multi_arf_enabled;
}
// Analyse and define a gf/arf group.
static void define_gf_group(VP9_COMP *cpi, FIRSTPASS_STATS *this_frame) {
RATE_CONTROL *const rc = &cpi->rc;
const VP9EncoderConfig *const oxcf = &cpi->oxcf;
TWO_PASS *const twopass = &cpi->twopass;
FIRSTPASS_STATS next_frame;
const FIRSTPASS_STATS *const start_pos = twopass->stats_in;
int i;
double boost_score = 0.0;
double old_boost_score = 0.0;
double gf_group_err = 0.0;
double gf_first_frame_err = 0.0;
double mod_frame_err = 0.0;
double mv_ratio_accumulator = 0.0;
double decay_accumulator = 1.0;
double zero_motion_accumulator = 1.0;
double loop_decay_rate = 1.00;
double last_loop_decay_rate = 1.00;
double this_frame_mv_in_out = 0.0;
double mv_in_out_accumulator = 0.0;
double abs_mv_in_out_accumulator = 0.0;
double mv_ratio_accumulator_thresh;
unsigned int allow_alt_ref = is_altref_enabled(cpi);
int f_boost = 0;
int b_boost = 0;
int flash_detected;
int active_max_gf_interval;
int64_t gf_group_bits;
double gf_group_error_left;
int gf_arf_bits;
// Reset the GF group data structures unless this is a key
// frame in which case it will already have been done.
if (cpi->common.frame_type != KEY_FRAME) {
vp9_zero(twopass->gf_group);
}
vp9_clear_system_state();
vp9_zero(next_frame);
// Load stats for the current frame.
mod_frame_err = calculate_modified_err(twopass, oxcf, this_frame);
// Note the error of the frame at the start of the group. This will be
// the GF frame error if we code a normal gf.
gf_first_frame_err = mod_frame_err;
// If this is a key frame or the overlay from a previous arf then
// the error score / cost of this frame has already been accounted for.
if (cpi->common.frame_type == KEY_FRAME || rc->source_alt_ref_active)
gf_group_err -= gf_first_frame_err;
// Motion breakout threshold for loop below depends on image size.
mv_ratio_accumulator_thresh = (cpi->common.width + cpi->common.height) / 10.0;
// Work out a maximum interval for the GF group.
// If the image appears almost completely static we can extend beyond this.
if (cpi->multi_arf_allowed) {
active_max_gf_interval = rc->max_gf_interval;
} else {
// The value chosen depends on the active Q range. At low Q we have
// bits to spare and are better with a smaller interval and smaller boost.
// At high Q when there are few bits to spare we are better with a longer
// interval to spread the cost of the GF.
active_max_gf_interval =
12 + ((int)vp9_convert_qindex_to_q(rc->last_q[INTER_FRAME]) >> 5);
if (active_max_gf_interval > rc->max_gf_interval)
active_max_gf_interval = rc->max_gf_interval;
}
i = 0;
while (i < rc->static_scene_max_gf_interval && i < rc->frames_to_key) {
++i;
// Accumulate error score of frames in this gf group.
mod_frame_err = calculate_modified_err(twopass, oxcf, this_frame);
gf_group_err += mod_frame_err;
if (EOF == input_stats(twopass, &next_frame))
break;
// Test for the case where there is a brief flash but the prediction
// quality back to an earlier frame is then restored.
flash_detected = detect_flash(twopass, 0);
// Update the motion related elements to the boost calculation.
accumulate_frame_motion_stats(&next_frame,
&this_frame_mv_in_out, &mv_in_out_accumulator,
&abs_mv_in_out_accumulator,
&mv_ratio_accumulator);
// Accumulate the effect of prediction quality decay.
if (!flash_detected) {
last_loop_decay_rate = loop_decay_rate;
loop_decay_rate = get_prediction_decay_rate(&cpi->common, &next_frame);
decay_accumulator = decay_accumulator * loop_decay_rate;
// Monitor for static sections.
zero_motion_accumulator = MIN(zero_motion_accumulator,
get_zero_motion_factor(&next_frame));
// Break clause to detect very still sections after motion. For example,
// a static image after a fade or other transition.
if (detect_transition_to_still(twopass, i, 5, loop_decay_rate,
last_loop_decay_rate)) {
allow_alt_ref = 0;
break;
}
}
// Calculate a boost number for this frame.
boost_score += decay_accumulator * calc_frame_boost(twopass, &next_frame,
this_frame_mv_in_out);
// Break out conditions.
if (
// Break at active_max_gf_interval unless almost totally static.
(i >= active_max_gf_interval && (zero_motion_accumulator < 0.995)) ||
(
// Don't break out with a very short interval.
(i > MIN_GF_INTERVAL) &&
((boost_score > 125.0) || (next_frame.pcnt_inter < 0.75)) &&
(!flash_detected) &&
((mv_ratio_accumulator > mv_ratio_accumulator_thresh) ||
(abs_mv_in_out_accumulator > 3.0) ||
(mv_in_out_accumulator < -2.0) ||
((boost_score - old_boost_score) < IIFACTOR)))) {
boost_score = old_boost_score;
break;
}
*this_frame = next_frame;
old_boost_score = boost_score;
}
twopass->gf_zeromotion_pct = (int)(zero_motion_accumulator * 1000.0);
// Don't allow a gf too near the next kf.
if ((rc->frames_to_key - i) < MIN_GF_INTERVAL) {
while (i < (rc->frames_to_key + !rc->next_key_frame_forced)) {
++i;
if (EOF == input_stats(twopass, this_frame))
break;
if (i < rc->frames_to_key) {
mod_frame_err = calculate_modified_err(twopass, oxcf, this_frame);
gf_group_err += mod_frame_err;
}
}
}
// Set the interval until the next gf.
if (cpi->common.frame_type == KEY_FRAME || rc->source_alt_ref_active)
rc->baseline_gf_interval = i - 1;
else
rc->baseline_gf_interval = i;
// Only encode alt reference frame in temporal base layer. So
// baseline_gf_interval should be multiple of a temporal layer group
// (typically the frame distance between two base layer frames)
if (is_two_pass_svc(cpi) && cpi->svc.number_temporal_layers > 1) {
int count = (1 << (cpi->svc.number_temporal_layers - 1)) - 1;
int new_gf_interval = (rc->baseline_gf_interval + count) & (~count);
int j;
for (j = 0; j < new_gf_interval - rc->baseline_gf_interval; ++j) {
if (EOF == input_stats(twopass, this_frame))
break;
gf_group_err += calculate_modified_err(twopass, oxcf, this_frame);
}
rc->baseline_gf_interval = new_gf_interval;
}
rc->frames_till_gf_update_due = rc->baseline_gf_interval;
// Should we use the alternate reference frame.
if (allow_alt_ref &&
(i < cpi->oxcf.lag_in_frames) &&
(i >= MIN_GF_INTERVAL) &&
// For real scene cuts (not forced kfs) don't allow arf very near kf.
(rc->next_key_frame_forced ||
(i <= (rc->frames_to_key - MIN_GF_INTERVAL)))) {
// Calculate the boost for alt ref.
rc->gfu_boost = calc_arf_boost(cpi, 0, (i - 1), (i - 1), &f_boost,
&b_boost);
rc->source_alt_ref_pending = 1;
// Test to see if multi arf is appropriate.
cpi->multi_arf_enabled =
(cpi->multi_arf_allowed && (rc->baseline_gf_interval >= 6) &&
(zero_motion_accumulator < 0.995)) ? 1 : 0;
} else {
rc->gfu_boost = (int)boost_score;
rc->source_alt_ref_pending = 0;
}
// Reset the file position.
reset_fpf_position(twopass, start_pos);
// Calculate the bits to be allocated to the gf/arf group as a whole
gf_group_bits = calculate_total_gf_group_bits(cpi, gf_group_err);
// Calculate the extra bits to be used for boosted frame(s)
{
int q = rc->last_q[INTER_FRAME];
int boost = (rc->gfu_boost * gfboost_qadjust(q)) / 100;
// Set max and minimum boost and hence minimum allocation.
boost = clamp(boost, 125, (rc->baseline_gf_interval + 1) * 200);
// Calculate the extra bits to be used for boosted frame(s)
gf_arf_bits = calculate_boost_bits(rc->baseline_gf_interval,
boost, gf_group_bits);
}
// Adjust KF group bits and error remaining.
twopass->kf_group_error_left -= (int64_t)gf_group_err;
// If this is an arf update we want to remove the score for the overlay
// frame at the end which will usually be very cheap to code.
// The overlay frame has already, in effect, been coded so we want to spread
// the remaining bits among the other frames.
// For normal GFs remove the score for the GF itself unless this is
// also a key frame in which case it has already been accounted for.
if (rc->source_alt_ref_pending) {
gf_group_error_left = gf_group_err - mod_frame_err;
} else if (cpi->common.frame_type != KEY_FRAME) {
gf_group_error_left = gf_group_err - gf_first_frame_err;
} else {
gf_group_error_left = gf_group_err;
}
// Allocate bits to each of the frames in the GF group.
allocate_gf_group_bits(cpi, gf_group_bits, gf_group_error_left, gf_arf_bits);
// Reset the file position.
reset_fpf_position(twopass, start_pos);
// Calculate a section intra ratio used in setting max loop filter.
if (cpi->common.frame_type != KEY_FRAME) {
twopass->section_intra_rating =
calculate_section_intra_ratio(start_pos, twopass->stats_in_end,
rc->baseline_gf_interval);
}
}
static int test_candidate_kf(TWO_PASS *twopass,
const FIRSTPASS_STATS *last_frame,
const FIRSTPASS_STATS *this_frame,
const FIRSTPASS_STATS *next_frame) {
int is_viable_kf = 0;
// Does the frame satisfy the primary criteria of a key frame?
// If so, then examine how well it predicts subsequent frames.
if ((this_frame->pcnt_second_ref < 0.10) &&
(next_frame->pcnt_second_ref < 0.10) &&
((this_frame->pcnt_inter < 0.05) ||
(((this_frame->pcnt_inter - this_frame->pcnt_neutral) < 0.35) &&
((this_frame->intra_error /
DOUBLE_DIVIDE_CHECK(this_frame->coded_error)) < 2.5) &&
((fabs(last_frame->coded_error - this_frame->coded_error) /
DOUBLE_DIVIDE_CHECK(this_frame->coded_error) > 0.40) ||
(fabs(last_frame->intra_error - this_frame->intra_error) /
DOUBLE_DIVIDE_CHECK(this_frame->intra_error) > 0.40) ||
((next_frame->intra_error /
DOUBLE_DIVIDE_CHECK(next_frame->coded_error)) > 3.5))))) {
int i;
const FIRSTPASS_STATS *start_pos = twopass->stats_in;
FIRSTPASS_STATS local_next_frame = *next_frame;
double boost_score = 0.0;
double old_boost_score = 0.0;
double decay_accumulator = 1.0;
// Examine how well the key frame predicts subsequent frames.
for (i = 0; i < 16; ++i) {
double next_iiratio = (IIKFACTOR1 * local_next_frame.intra_error /
DOUBLE_DIVIDE_CHECK(local_next_frame.coded_error));
if (next_iiratio > RMAX)
next_iiratio = RMAX;
// Cumulative effect of decay in prediction quality.
if (local_next_frame.pcnt_inter > 0.85)
decay_accumulator *= local_next_frame.pcnt_inter;
else
decay_accumulator *= (0.85 + local_next_frame.pcnt_inter) / 2.0;
// Keep a running total.
boost_score += (decay_accumulator * next_iiratio);
// Test various breakout clauses.
if ((local_next_frame.pcnt_inter < 0.05) ||
(next_iiratio < 1.5) ||
(((local_next_frame.pcnt_inter -
local_next_frame.pcnt_neutral) < 0.20) &&
(next_iiratio < 3.0)) ||
((boost_score - old_boost_score) < 3.0) ||
(local_next_frame.intra_error < 200)) {
break;
}
old_boost_score = boost_score;
// Get the next frame details
if (EOF == input_stats(twopass, &local_next_frame))
break;
}
// If there is tolerable prediction for at least the next 3 frames then
// break out else discard this potential key frame and move on
if (boost_score > 30.0 && (i > 3)) {
is_viable_kf = 1;
} else {
// Reset the file position
reset_fpf_position(twopass, start_pos);
is_viable_kf = 0;
}
}
return is_viable_kf;
}
static void find_next_key_frame(VP9_COMP *cpi, FIRSTPASS_STATS *this_frame) {
int i, j;
RATE_CONTROL *const rc = &cpi->rc;
TWO_PASS *const twopass = &cpi->twopass;
GF_GROUP *const gf_group = &twopass->gf_group;
const VP9EncoderConfig *const oxcf = &cpi->oxcf;
const FIRSTPASS_STATS first_frame = *this_frame;
const FIRSTPASS_STATS *const start_position = twopass->stats_in;
FIRSTPASS_STATS next_frame;
FIRSTPASS_STATS last_frame;
int kf_bits = 0;
double decay_accumulator = 1.0;
double zero_motion_accumulator = 1.0;
double boost_score = 0.0;
double kf_mod_err = 0.0;
double kf_group_err = 0.0;
double recent_loop_decay[8] = {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0};
vp9_zero(next_frame);
cpi->common.frame_type = KEY_FRAME;
// Reset the GF group data structures.
vp9_zero(*gf_group);
// Is this a forced key frame by interval.
rc->this_key_frame_forced = rc->next_key_frame_forced;
// Clear the alt ref active flag and last group multi arf flags as they
// can never be set for a key frame.
rc->source_alt_ref_active = 0;
cpi->multi_arf_last_grp_enabled = 0;
// KF is always a GF so clear frames till next gf counter.
rc->frames_till_gf_update_due = 0;
rc->frames_to_key = 1;
twopass->kf_group_bits = 0; // Total bits available to kf group
twopass->kf_group_error_left = 0; // Group modified error score.
kf_mod_err = calculate_modified_err(twopass, oxcf, this_frame);
// Find the next keyframe.
i = 0;
while (twopass->stats_in < twopass->stats_in_end &&
rc->frames_to_key < cpi->oxcf.key_freq) {
// Accumulate kf group error.
kf_group_err += calculate_modified_err(twopass, oxcf, this_frame);
// Load the next frame's stats.
last_frame = *this_frame;
input_stats(twopass, this_frame);
// Provided that we are not at the end of the file...
if (cpi->oxcf.auto_key && twopass->stats_in < twopass->stats_in_end) {
double loop_decay_rate;
// Check for a scene cut.
if (test_candidate_kf(twopass, &last_frame, this_frame,
twopass->stats_in))
break;
// How fast is the prediction quality decaying?
loop_decay_rate = get_prediction_decay_rate(&cpi->common,
twopass->stats_in);
// We want to know something about the recent past... rather than
// as used elsewhere where we are concerned with decay in prediction
// quality since the last GF or KF.
recent_loop_decay[i % 8] = loop_decay_rate;
decay_accumulator = 1.0;
for (j = 0; j < 8; ++j)
decay_accumulator *= recent_loop_decay[j];
// Special check for transition or high motion followed by a
// static scene.
if (detect_transition_to_still(twopass, i, cpi->oxcf.key_freq - i,
loop_decay_rate, decay_accumulator))
break;
// Step on to the next frame.
++rc->frames_to_key;
// If we don't have a real key frame within the next two
// key_freq intervals then break out of the loop.
if (rc->frames_to_key >= 2 * cpi->oxcf.key_freq)
break;
} else {
++rc->frames_to_key;
}
++i;
}
// If there is a max kf interval set by the user we must obey it.
// We already breakout of the loop above at 2x max.
// This code centers the extra kf if the actual natural interval
// is between 1x and 2x.
if (cpi->oxcf.auto_key &&
rc->frames_to_key > cpi->oxcf.key_freq) {
FIRSTPASS_STATS tmp_frame = first_frame;
rc->frames_to_key /= 2;
// Reset to the start of the group.
reset_fpf_position(twopass, start_position);
kf_group_err = 0;
// Rescan to get the correct error data for the forced kf group.
for (i = 0; i < rc->frames_to_key; ++i) {
kf_group_err += calculate_modified_err(twopass, oxcf, &tmp_frame);
input_stats(twopass, &tmp_frame);
}
rc->next_key_frame_forced = 1;
} else if (twopass->stats_in == twopass->stats_in_end ||
rc->frames_to_key >= cpi->oxcf.key_freq) {
rc->next_key_frame_forced = 1;
} else {
rc->next_key_frame_forced = 0;
}
if (is_two_pass_svc(cpi) && cpi->svc.number_temporal_layers > 1) {
int count = (1 << (cpi->svc.number_temporal_layers - 1)) - 1;
int new_frame_to_key = (rc->frames_to_key + count) & (~count);
int j;
for (j = 0; j < new_frame_to_key - rc->frames_to_key; ++j) {
if (EOF == input_stats(twopass, this_frame))
break;
kf_group_err += calculate_modified_err(twopass, oxcf, this_frame);
}
rc->frames_to_key = new_frame_to_key;
}
// Special case for the last key frame of the file.
if (twopass->stats_in >= twopass->stats_in_end) {
// Accumulate kf group error.
kf_group_err += calculate_modified_err(twopass, oxcf, this_frame);
}
// Calculate the number of bits that should be assigned to the kf group.
if (twopass->bits_left > 0 && twopass->modified_error_left > 0.0) {
// Maximum number of bits for a single normal frame (not key frame).
const int max_bits = frame_max_bits(rc, &cpi->oxcf);
// Maximum number of bits allocated to the key frame group.
int64_t max_grp_bits;
// Default allocation based on bits left and relative
// complexity of the section.
twopass->kf_group_bits = (int64_t)(twopass->bits_left *
(kf_group_err / twopass->modified_error_left));
// Clip based on maximum per frame rate defined by the user.
max_grp_bits = (int64_t)max_bits * (int64_t)rc->frames_to_key;
if (twopass->kf_group_bits > max_grp_bits)
twopass->kf_group_bits = max_grp_bits;
} else {
twopass->kf_group_bits = 0;
}
twopass->kf_group_bits = MAX(0, twopass->kf_group_bits);
// Reset the first pass file position.
reset_fpf_position(twopass, start_position);
// Scan through the kf group collating various stats used to deteermine
// how many bits to spend on it.
decay_accumulator = 1.0;
boost_score = 0.0;
for (i = 0; i < rc->frames_to_key; ++i) {
if (EOF == input_stats(twopass, &next_frame))
break;
// Monitor for static sections.
zero_motion_accumulator =MIN(zero_motion_accumulator,
get_zero_motion_factor(&next_frame));
// For the first few frames collect data to decide kf boost.
if (i <= (rc->max_gf_interval * 2)) {
double r;
if (next_frame.intra_error > twopass->kf_intra_err_min)
r = (IIKFACTOR2 * next_frame.intra_error /
DOUBLE_DIVIDE_CHECK(next_frame.coded_error));
else
r = (IIKFACTOR2 * twopass->kf_intra_err_min /
DOUBLE_DIVIDE_CHECK(next_frame.coded_error));
if (r > RMAX)
r = RMAX;
// How fast is prediction quality decaying.
if (!detect_flash(twopass, 0)) {
const double loop_decay_rate = get_prediction_decay_rate(&cpi->common,
&next_frame);
decay_accumulator *= loop_decay_rate;
decay_accumulator = MAX(decay_accumulator, MIN_DECAY_FACTOR);
}
boost_score += (decay_accumulator * r);
}
}
reset_fpf_position(twopass, start_position);
// Store the zero motion percentage
twopass->kf_zeromotion_pct = (int)(zero_motion_accumulator * 100.0);
// Calculate a section intra ratio used in setting max loop filter.
twopass->section_intra_rating =
calculate_section_intra_ratio(start_position, twopass->stats_in_end,
rc->frames_to_key);
// Work out how many bits to allocate for the key frame itself.
rc->kf_boost = (int)boost_score;
if (rc->kf_boost < (rc->frames_to_key * 3))
rc->kf_boost = (rc->frames_to_key * 3);
if (rc->kf_boost < MIN_KF_BOOST)
rc->kf_boost = MIN_KF_BOOST;
kf_bits = calculate_boost_bits((rc->frames_to_key - 1),
rc->kf_boost, twopass->kf_group_bits);
twopass->kf_group_bits -= kf_bits;
// Save the bits to spend on the key frame.
gf_group->bit_allocation[0] = kf_bits;
gf_group->update_type[0] = KF_UPDATE;
gf_group->rf_level[0] = KF_STD;
// Note the total error score of the kf group minus the key frame itself.
twopass->kf_group_error_left = (int)(kf_group_err - kf_mod_err);
// Adjust the count of total modified error left.
// The count of bits left is adjusted elsewhere based on real coded frame
// sizes.
twopass->modified_error_left -= kf_group_err;
}
// For VBR...adjustment to the frame target based on error from previous frames
void vbr_rate_correction(int * this_frame_target,
const int64_t vbr_bits_off_target) {
int max_delta = (*this_frame_target * 15) / 100;
// vbr_bits_off_target > 0 means we have extra bits to spend
if (vbr_bits_off_target > 0) {
*this_frame_target +=
(vbr_bits_off_target > max_delta) ? max_delta
: (int)vbr_bits_off_target;
} else {
*this_frame_target -=
(vbr_bits_off_target < -max_delta) ? max_delta
: (int)-vbr_bits_off_target;
}
}
// Define the reference buffers that will be updated post encode.
void configure_buffer_updates(VP9_COMP *cpi) {
TWO_PASS *const twopass = &cpi->twopass;
cpi->rc.is_src_frame_alt_ref = 0;
switch (twopass->gf_group.update_type[twopass->gf_group.index]) {
case KF_UPDATE:
cpi->refresh_last_frame = 1;
cpi->refresh_golden_frame = 1;
cpi->refresh_alt_ref_frame = 1;
break;
case LF_UPDATE:
cpi->refresh_last_frame = 1;
cpi->refresh_golden_frame = 0;
cpi->refresh_alt_ref_frame = 0;
break;
case GF_UPDATE:
cpi->refresh_last_frame = 1;
cpi->refresh_golden_frame = 1;
cpi->refresh_alt_ref_frame = 0;
break;
case OVERLAY_UPDATE:
cpi->refresh_last_frame = 0;
cpi->refresh_golden_frame = 1;
cpi->refresh_alt_ref_frame = 0;
cpi->rc.is_src_frame_alt_ref = 1;
break;
case ARF_UPDATE:
cpi->refresh_last_frame = 0;
cpi->refresh_golden_frame = 0;
cpi->refresh_alt_ref_frame = 1;
break;
default:
assert(0);
break;
}
if (is_two_pass_svc(cpi)) {
if (cpi->svc.layer_context[cpi->svc.spatial_layer_id].gold_ref_idx < 0)
cpi->refresh_golden_frame = 0;
if (cpi->alt_ref_source == NULL)
cpi->refresh_alt_ref_frame = 0;
}
}
void vp9_rc_get_second_pass_params(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
RATE_CONTROL *const rc = &cpi->rc;
TWO_PASS *const twopass = &cpi->twopass;
GF_GROUP *const gf_group = &twopass->gf_group;
int frames_left;
FIRSTPASS_STATS this_frame;
FIRSTPASS_STATS this_frame_copy;
int target_rate;
LAYER_CONTEXT *const lc = is_two_pass_svc(cpi) ?
&cpi->svc.layer_context[cpi->svc.spatial_layer_id] : 0;
if (lc != NULL) {
frames_left = (int)(twopass->total_stats.count -
lc->current_video_frame_in_layer);
} else {
frames_left = (int)(twopass->total_stats.count -
cm->current_video_frame);
}
if (!twopass->stats_in)
return;
// If this is an arf frame then we dont want to read the stats file or
// advance the input pointer as we already have what we need.
if (gf_group->update_type[gf_group->index] == ARF_UPDATE) {
int target_rate;
configure_buffer_updates(cpi);
target_rate = gf_group->bit_allocation[gf_group->index];
target_rate = vp9_rc_clamp_pframe_target_size(cpi, target_rate);
rc->base_frame_target = target_rate;
// Correction to rate target based on prior over or under shoot.
if (cpi->oxcf.rc_mode == VPX_VBR)
vbr_rate_correction(&target_rate, rc->vbr_bits_off_target);
vp9_rc_set_frame_target(cpi, target_rate);
cm->frame_type = INTER_FRAME;
if (lc != NULL) {
if (cpi->svc.spatial_layer_id == 0) {
lc->is_key_frame = 0;
} else {
lc->is_key_frame = cpi->svc.layer_context[0].is_key_frame;
if (lc->is_key_frame)
cpi->ref_frame_flags &= (~VP9_LAST_FLAG);
}
}
return;
}
vp9_clear_system_state();
if (lc != NULL && twopass->kf_intra_err_min == 0) {
twopass->kf_intra_err_min = KF_MB_INTRA_MIN * cpi->common.MBs;
twopass->gf_intra_err_min = GF_MB_INTRA_MIN * cpi->common.MBs;
}
if (cpi->oxcf.rc_mode == VPX_Q) {
twopass->active_worst_quality = cpi->oxcf.cq_level;
} else if (cm->current_video_frame == 0 ||
(lc != NULL && lc->current_video_frame_in_layer == 0)) {
// Special case code for first frame.
const int section_target_bandwidth = (int)(twopass->bits_left /
frames_left);
const int tmp_q = get_twopass_worst_quality(cpi, &twopass->total_left_stats,
section_target_bandwidth);
twopass->active_worst_quality = tmp_q;
rc->ni_av_qi = tmp_q;
rc->avg_q = vp9_convert_qindex_to_q(tmp_q);
}
vp9_zero(this_frame);
if (EOF == input_stats(twopass, &this_frame))
return;
// Local copy of the current frame's first pass stats.
this_frame_copy = this_frame;
// Keyframe and section processing.
if (rc->frames_to_key == 0 ||
(cpi->frame_flags & FRAMEFLAGS_KEY)) {
// Define next KF group and assign bits to it.
find_next_key_frame(cpi, &this_frame_copy);
} else {
cm->frame_type = INTER_FRAME;
}
if (lc != NULL) {
if (cpi->svc.spatial_layer_id == 0) {
lc->is_key_frame = (cm->frame_type == KEY_FRAME);
if (lc->is_key_frame) {
cpi->ref_frame_flags &=
(~VP9_LAST_FLAG & ~VP9_GOLD_FLAG & ~VP9_ALT_FLAG);
lc->frames_from_key_frame = 0;
}
} else {
cm->frame_type = INTER_FRAME;
lc->is_key_frame = cpi->svc.layer_context[0].is_key_frame;
if (lc->is_key_frame) {
cpi->ref_frame_flags &= (~VP9_LAST_FLAG);
lc->frames_from_key_frame = 0;
}
}
}
// Define a new GF/ARF group. (Should always enter here for key frames).
if (rc->frames_till_gf_update_due == 0) {
define_gf_group(cpi, &this_frame_copy);
if (twopass->gf_zeromotion_pct > 995) {
// As long as max_thresh for encode breakout is small enough, it is ok
// to enable it for show frame, i.e. set allow_encode_breakout to
// ENCODE_BREAKOUT_LIMITED.
if (!cm->show_frame)
cpi->allow_encode_breakout = ENCODE_BREAKOUT_DISABLED;
else
cpi->allow_encode_breakout = ENCODE_BREAKOUT_LIMITED;
}
rc->frames_till_gf_update_due = rc->baseline_gf_interval;
if (lc != NULL)
cpi->refresh_golden_frame = 1;
}
configure_buffer_updates(cpi);
target_rate = gf_group->bit_allocation[gf_group->index];
if (cpi->common.frame_type == KEY_FRAME)
target_rate = vp9_rc_clamp_iframe_target_size(cpi, target_rate);
else
target_rate = vp9_rc_clamp_pframe_target_size(cpi, target_rate);
rc->base_frame_target = target_rate;
// Correction to rate target based on prior over or under shoot.
if (cpi->oxcf.rc_mode == VPX_VBR)
vbr_rate_correction(&target_rate, rc->vbr_bits_off_target);
vp9_rc_set_frame_target(cpi, target_rate);
// Update the total stats remaining structure.
subtract_stats(&twopass->total_left_stats, &this_frame);
}
void vp9_twopass_postencode_update(VP9_COMP *cpi) {
TWO_PASS *const twopass = &cpi->twopass;
RATE_CONTROL *const rc = &cpi->rc;
// VBR correction is done through rc->vbr_bits_off_target. Based on the
// sign of this value, a limited % adjustment is made to the target rate
// of subsequent frames, to try and push it back towards 0. This method
// is designed to prevent extreme behaviour at the end of a clip
// or group of frames.
const int bits_used = rc->base_frame_target;
rc->vbr_bits_off_target += rc->base_frame_target - rc->projected_frame_size;
twopass->bits_left = MAX(twopass->bits_left - bits_used, 0);
if (cpi->common.frame_type != KEY_FRAME &&
!vp9_is_upper_layer_key_frame(cpi)) {
twopass->kf_group_bits -= bits_used;
}
twopass->kf_group_bits = MAX(twopass->kf_group_bits, 0);
// Increment the gf group index ready for the next frame.
++twopass->gf_group.index;
}