ref: a28d43658e3347d55d70655e6ee3d87d0d3fba8a
dir: /vp9/encoder/x86/vp9_diamond_search_sad_avx.c/
/*
* Copyright (c) 2015 The WebM project authors. All Rights Reserved.
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
*/
#if defined(_MSC_VER)
#include <intrin.h>
#endif
#include <emmintrin.h>
#include <smmintrin.h>
#include "vpx_dsp/vpx_dsp_common.h"
#include "vp9/encoder/vp9_encoder.h"
#include "vpx_ports/mem.h"
#ifdef __GNUC__
#define LIKELY(v) __builtin_expect(v, 1)
#define UNLIKELY(v) __builtin_expect(v, 0)
#else
#define LIKELY(v) (v)
#define UNLIKELY(v) (v)
#endif
static INLINE int_mv pack_int_mv(int16_t row, int16_t col) {
int_mv result;
result.as_mv.row = row;
result.as_mv.col = col;
return result;
}
static INLINE MV_JOINT_TYPE get_mv_joint(const int_mv mv) {
// This is simplified from the C implementation to utilise that
// x->nmvjointsadcost[1] == x->nmvjointsadcost[2] and
// x->nmvjointsadcost[1] == x->nmvjointsadcost[3]
return mv.as_int == 0 ? 0 : 1;
}
static INLINE int mv_cost(const int_mv mv, const int *joint_cost,
int *const comp_cost[2]) {
return joint_cost[get_mv_joint(mv)] + comp_cost[0][mv.as_mv.row] +
comp_cost[1][mv.as_mv.col];
}
static int mvsad_err_cost(const MACROBLOCK *x, const int_mv mv, const MV *ref,
int sad_per_bit) {
const int_mv diff =
pack_int_mv(mv.as_mv.row - ref->row, mv.as_mv.col - ref->col);
return ROUND_POWER_OF_TWO(
(unsigned)mv_cost(diff, x->nmvjointsadcost, x->nmvsadcost) * sad_per_bit,
VP9_PROB_COST_SHIFT);
}
/*****************************************************************************
* This function utilizes 3 properties of the cost function lookup tables, *
* constructed in using 'cal_nmvjointsadcost' and 'cal_nmvsadcosts' in *
* vp9_encoder.c. *
* For the joint cost: *
* - mvjointsadcost[1] == mvjointsadcost[2] == mvjointsadcost[3] *
* For the component costs: *
* - For all i: mvsadcost[0][i] == mvsadcost[1][i] *
* (Equal costs for both components) *
* - For all i: mvsadcost[0][i] == mvsadcost[0][-i] *
* (Cost function is even) *
* If these do not hold, then this function cannot be used without *
* modification, in which case you can revert to using the C implementation, *
* which does not rely on these properties. *
*****************************************************************************/
int vp9_diamond_search_sad_avx(const MACROBLOCK *x,
const search_site_config *cfg, MV *ref_mv,
MV *best_mv, int search_param, int sad_per_bit,
int *num00, const vp9_variance_fn_ptr_t *fn_ptr,
const MV *center_mv) {
const int_mv maxmv = pack_int_mv(x->mv_limits.row_max, x->mv_limits.col_max);
const __m128i v_max_mv_w = _mm_set1_epi32(maxmv.as_int);
const int_mv minmv = pack_int_mv(x->mv_limits.row_min, x->mv_limits.col_min);
const __m128i v_min_mv_w = _mm_set1_epi32(minmv.as_int);
const __m128i v_spb_d = _mm_set1_epi32(sad_per_bit);
const __m128i v_joint_cost_0_d = _mm_set1_epi32(x->nmvjointsadcost[0]);
const __m128i v_joint_cost_1_d = _mm_set1_epi32(x->nmvjointsadcost[1]);
// search_param determines the length of the initial step and hence the number
// of iterations.
// 0 = initial step (MAX_FIRST_STEP) pel
// 1 = (MAX_FIRST_STEP/2) pel,
// 2 = (MAX_FIRST_STEP/4) pel...
const MV *ss_mv = &cfg->ss_mv[cfg->searches_per_step * search_param];
const intptr_t *ss_os = &cfg->ss_os[cfg->searches_per_step * search_param];
const int tot_steps = cfg->total_steps - search_param;
const int_mv fcenter_mv =
pack_int_mv(center_mv->row >> 3, center_mv->col >> 3);
const __m128i vfcmv = _mm_set1_epi32(fcenter_mv.as_int);
const int ref_row = clamp(ref_mv->row, minmv.as_mv.row, maxmv.as_mv.row);
const int ref_col = clamp(ref_mv->col, minmv.as_mv.col, maxmv.as_mv.col);
int_mv bmv = pack_int_mv(ref_row, ref_col);
int_mv new_bmv = bmv;
__m128i v_bmv_w = _mm_set1_epi32(bmv.as_int);
const int what_stride = x->plane[0].src.stride;
const int in_what_stride = x->e_mbd.plane[0].pre[0].stride;
const uint8_t *const what = x->plane[0].src.buf;
const uint8_t *const in_what =
x->e_mbd.plane[0].pre[0].buf + ref_row * in_what_stride + ref_col;
// Work out the start point for the search
const uint8_t *best_address = in_what;
const uint8_t *new_best_address = best_address;
#if VPX_ARCH_X86_64
__m128i v_ba_q = _mm_set1_epi64x((intptr_t)best_address);
#else
__m128i v_ba_d = _mm_set1_epi32((intptr_t)best_address);
#endif
unsigned int best_sad;
int i, j, step;
// Check the prerequisite cost function properties that are easy to check
// in an assert. See the function-level documentation for details on all
// prerequisites.
assert(x->nmvjointsadcost[1] == x->nmvjointsadcost[2]);
assert(x->nmvjointsadcost[1] == x->nmvjointsadcost[3]);
// Check the starting position
best_sad = fn_ptr->sdf(what, what_stride, in_what, in_what_stride);
best_sad += mvsad_err_cost(x, bmv, &fcenter_mv.as_mv, sad_per_bit);
*num00 = 0;
for (i = 0, step = 0; step < tot_steps; step++) {
for (j = 0; j < cfg->searches_per_step; j += 4, i += 4) {
__m128i v_sad_d, v_cost_d, v_outside_d, v_inside_d, v_diff_mv_w;
#if VPX_ARCH_X86_64
__m128i v_blocka[2];
#else
__m128i v_blocka[1];
#endif
// Compute the candidate motion vectors
const __m128i v_ss_mv_w = _mm_loadu_si128((const __m128i *)&ss_mv[i]);
const __m128i v_these_mv_w = _mm_add_epi16(v_bmv_w, v_ss_mv_w);
// Clamp them to the search bounds
__m128i v_these_mv_clamp_w = v_these_mv_w;
v_these_mv_clamp_w = _mm_min_epi16(v_these_mv_clamp_w, v_max_mv_w);
v_these_mv_clamp_w = _mm_max_epi16(v_these_mv_clamp_w, v_min_mv_w);
// The ones that did not change are inside the search area
v_inside_d = _mm_cmpeq_epi32(v_these_mv_clamp_w, v_these_mv_w);
// If none of them are inside, then move on
if (LIKELY(_mm_test_all_zeros(v_inside_d, v_inside_d))) {
continue;
}
// The inverse mask indicates which of the MVs are outside
v_outside_d = _mm_xor_si128(v_inside_d, _mm_set1_epi8((int8_t)0xff));
// Shift right to keep the sign bit clear, we will use this later
// to set the cost to the maximum value.
v_outside_d = _mm_srli_epi32(v_outside_d, 1);
// Compute the difference MV
v_diff_mv_w = _mm_sub_epi16(v_these_mv_clamp_w, vfcmv);
// We utilise the fact that the cost function is even, and use the
// absolute difference. This allows us to use unsigned indexes later
// and reduces cache pressure somewhat as only a half of the table
// is ever referenced.
v_diff_mv_w = _mm_abs_epi16(v_diff_mv_w);
// Compute the SIMD pointer offsets.
{
#if VPX_ARCH_X86_64 // sizeof(intptr_t) == 8
// Load the offsets
__m128i v_bo10_q = _mm_loadu_si128((const __m128i *)&ss_os[i + 0]);
__m128i v_bo32_q = _mm_loadu_si128((const __m128i *)&ss_os[i + 2]);
// Set the ones falling outside to zero
v_bo10_q = _mm_and_si128(v_bo10_q, _mm_cvtepi32_epi64(v_inside_d));
v_bo32_q =
_mm_and_si128(v_bo32_q, _mm_unpackhi_epi32(v_inside_d, v_inside_d));
// Compute the candidate addresses
v_blocka[0] = _mm_add_epi64(v_ba_q, v_bo10_q);
v_blocka[1] = _mm_add_epi64(v_ba_q, v_bo32_q);
#else // VPX_ARCH_X86 // sizeof(intptr_t) == 4
__m128i v_bo_d = _mm_loadu_si128((const __m128i *)&ss_os[i]);
v_bo_d = _mm_and_si128(v_bo_d, v_inside_d);
v_blocka[0] = _mm_add_epi32(v_ba_d, v_bo_d);
#endif
}
fn_ptr->sdx4df(what, what_stride, (const uint8_t **)&v_blocka[0],
in_what_stride, (uint32_t *)&v_sad_d);
// Look up the component cost of the residual motion vector
{
const int32_t row0 = _mm_extract_epi16(v_diff_mv_w, 0);
const int32_t col0 = _mm_extract_epi16(v_diff_mv_w, 1);
const int32_t row1 = _mm_extract_epi16(v_diff_mv_w, 2);
const int32_t col1 = _mm_extract_epi16(v_diff_mv_w, 3);
const int32_t row2 = _mm_extract_epi16(v_diff_mv_w, 4);
const int32_t col2 = _mm_extract_epi16(v_diff_mv_w, 5);
const int32_t row3 = _mm_extract_epi16(v_diff_mv_w, 6);
const int32_t col3 = _mm_extract_epi16(v_diff_mv_w, 7);
// Note: This is a use case for vpgather in AVX2
const uint32_t cost0 = x->nmvsadcost[0][row0] + x->nmvsadcost[0][col0];
const uint32_t cost1 = x->nmvsadcost[0][row1] + x->nmvsadcost[0][col1];
const uint32_t cost2 = x->nmvsadcost[0][row2] + x->nmvsadcost[0][col2];
const uint32_t cost3 = x->nmvsadcost[0][row3] + x->nmvsadcost[0][col3];
__m128i v_cost_10_d, v_cost_32_d;
v_cost_10_d = _mm_cvtsi32_si128(cost0);
v_cost_10_d = _mm_insert_epi32(v_cost_10_d, cost1, 1);
v_cost_32_d = _mm_cvtsi32_si128(cost2);
v_cost_32_d = _mm_insert_epi32(v_cost_32_d, cost3, 1);
v_cost_d = _mm_unpacklo_epi64(v_cost_10_d, v_cost_32_d);
}
// Now add in the joint cost
{
const __m128i v_sel_d =
_mm_cmpeq_epi32(v_diff_mv_w, _mm_setzero_si128());
const __m128i v_joint_cost_d =
_mm_blendv_epi8(v_joint_cost_1_d, v_joint_cost_0_d, v_sel_d);
v_cost_d = _mm_add_epi32(v_cost_d, v_joint_cost_d);
}
// Multiply by sad_per_bit
v_cost_d = _mm_mullo_epi32(v_cost_d, v_spb_d);
// ROUND_POWER_OF_TWO(v_cost_d, VP9_PROB_COST_SHIFT)
v_cost_d = _mm_add_epi32(v_cost_d,
_mm_set1_epi32(1 << (VP9_PROB_COST_SHIFT - 1)));
v_cost_d = _mm_srai_epi32(v_cost_d, VP9_PROB_COST_SHIFT);
// Add the cost to the sad
v_sad_d = _mm_add_epi32(v_sad_d, v_cost_d);
// Make the motion vectors outside the search area have max cost
// by or'ing in the comparison mask, this way the minimum search won't
// pick them.
v_sad_d = _mm_or_si128(v_sad_d, v_outside_d);
// Find the minimum value and index horizontally in v_sad_d
{
// Try speculatively on 16 bits, so we can use the minpos intrinsic
const __m128i v_sad_w = _mm_packus_epi32(v_sad_d, v_sad_d);
const __m128i v_minp_w = _mm_minpos_epu16(v_sad_w);
uint32_t local_best_sad = _mm_extract_epi16(v_minp_w, 0);
uint32_t local_best_idx = _mm_extract_epi16(v_minp_w, 1);
// If the local best value is not saturated, just use it, otherwise
// find the horizontal minimum again the hard way on 32 bits.
// This is executed rarely.
if (UNLIKELY(local_best_sad == 0xffff)) {
__m128i v_loval_d, v_hival_d, v_loidx_d, v_hiidx_d, v_sel_d;
v_loval_d = v_sad_d;
v_loidx_d = _mm_set_epi32(3, 2, 1, 0);
v_hival_d = _mm_srli_si128(v_loval_d, 8);
v_hiidx_d = _mm_srli_si128(v_loidx_d, 8);
v_sel_d = _mm_cmplt_epi32(v_hival_d, v_loval_d);
v_loval_d = _mm_blendv_epi8(v_loval_d, v_hival_d, v_sel_d);
v_loidx_d = _mm_blendv_epi8(v_loidx_d, v_hiidx_d, v_sel_d);
v_hival_d = _mm_srli_si128(v_loval_d, 4);
v_hiidx_d = _mm_srli_si128(v_loidx_d, 4);
v_sel_d = _mm_cmplt_epi32(v_hival_d, v_loval_d);
v_loval_d = _mm_blendv_epi8(v_loval_d, v_hival_d, v_sel_d);
v_loidx_d = _mm_blendv_epi8(v_loidx_d, v_hiidx_d, v_sel_d);
local_best_sad = _mm_extract_epi32(v_loval_d, 0);
local_best_idx = _mm_extract_epi32(v_loidx_d, 0);
}
// Update the global minimum if the local minimum is smaller
if (LIKELY(local_best_sad < best_sad)) {
new_bmv = ((const int_mv *)&v_these_mv_w)[local_best_idx];
new_best_address = ((const uint8_t **)v_blocka)[local_best_idx];
best_sad = local_best_sad;
}
}
}
bmv = new_bmv;
best_address = new_best_address;
v_bmv_w = _mm_set1_epi32(bmv.as_int);
#if VPX_ARCH_X86_64
v_ba_q = _mm_set1_epi64x((intptr_t)best_address);
#else
v_ba_d = _mm_set1_epi32((intptr_t)best_address);
#endif
if (UNLIKELY(best_address == in_what)) {
(*num00)++;
}
}
*best_mv = bmv.as_mv;
return best_sad;
}