shithub: openh264

ref: dcd967471f7870b0247fe4b607a4b35eabc7de0d
dir: /test/api/sha1.c/

View raw version
/*!
 * \copy
 *     Copyright (c)  1998, 2009 Paul E. Jones <[email protected]>
 *     All rights reserved.
 *
 *     Redistribution and use in source and binary forms, with or without
 *     modification, are permitted provided that the following conditions
 *     are met:
 *
 *        * Redistributions of source code must retain the above copyright
 *          notice, this list of conditions and the following disclaimer.
 *
 *        * Redistributions in binary form must reproduce the above copyright
 *          notice, this list of conditions and the following disclaimer in
 *          the documentation and/or other materials provided with the
 *          distribution.
 *
 *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 *     COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 *     INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 *     BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 *     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 *     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 *     ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 *     POSSIBILITY OF SUCH DAMAGE.
 *
 */

/*
 *  Description:
 *      This file implements the Secure Hashing Standard as defined
 *      in FIPS PUB 180-1 published April 17, 1995.
 *
 *      The Secure Hashing Standard, which uses the Secure Hashing
 *      Algorithm (SHA), produces a 160-bit message digest for a
 *      given data stream.  In theory, it is highly improbable that
 *      two messages will produce the same message digest.  Therefore,
 *      this algorithm can serve as a means of providing a "fingerprint"
 *      for a message.
 *
 *  Portability Issues:
 *      SHA-1 is defined in terms of 32-bit "words".  This code was
 *      written with the expectation that the processor has at least
 *      a 32-bit machine word size.  If the machine word size is larger,
 *      the code should still function properly.  One caveat to that
 *      is that the input functions taking characters and character
 *      arrays assume that only 8 bits of information are stored in each
 *      character.
 *
 *  Caveats:
 *      SHA-1 is designed to work with messages less than 2^64 bits
 *      long. Although SHA-1 allows a message digest to be generated for
 *      messages of any number of bits less than 2^64, this
 *      implementation only works with messages with a length that is a
 *      multiple of the size of an 8-bit character.
 *
 */

#include "sha1.h"

/*
 *  Define the circular shift macro
 */
#define SHA1CircularShift(bits,word) \
                ((((word) << (bits)) & 0xFFFFFFFF) | \
                ((word) >> (32-(bits))))

/* Function prototypes */
void SHA1ProcessMessageBlock(SHA1Context *);
void SHA1PadMessage(SHA1Context *);

/*
 *  SHA1Reset
 *
 *  Description:
 *      This function will initialize the SHA1Context in preparation
 *      for computing a new message digest.
 *
 *  Parameters:
 *      context: [in/out]
 *          The context to reset.
 *
 *  Returns:
 *      Nothing.
 *
 *  Comments:
 *
 */
void SHA1Reset(SHA1Context *context)
{
    context->Length_Low             = 0;
    context->Length_High            = 0;
    context->Message_Block_Index    = 0;

    context->Message_Digest[0]      = 0x67452301;
    context->Message_Digest[1]      = 0xEFCDAB89;
    context->Message_Digest[2]      = 0x98BADCFE;
    context->Message_Digest[3]      = 0x10325476;
    context->Message_Digest[4]      = 0xC3D2E1F0;

    context->Computed   = 0;
    context->Corrupted  = 0;
}

/*
 *  SHA1Result
 *
 *  Description:
 *      This function will return the 160-bit message digest into the
 *      digest array provided as a parameter.
 *
 *  Parameters:
 *      context: [in/out]
 *          The context to use to calculate the SHA-1 hash.
 *      digest: [out]
 *          An array of characters where the digest is written.
 *
 *  Returns:
 *      1 if successful, 0 if it failed.
 *
 *  Comments:
 *
 */
int SHA1Result(SHA1Context *context, unsigned char *digest)
{
    int i;

    if (context->Corrupted)
    {
        return 0;
    }

    if (!context->Computed)
    {
        SHA1PadMessage(context);
        context->Computed = 1;
    }

    for (i = 0; i < SHA_DIGEST_LENGTH; i++)
        digest[i] = context->Message_Digest[i / 4] >> (8 * (3 - (i % 4)));

    return 1;
}

/*
 *  SHA1Input
 *
 *  Description:
 *      This function accepts an array of octets as the next portion of
 *      the message.
 *
 *  Parameters:
 *      context: [in/out]
 *          The SHA-1 context to update
 *      message_array: [in]
 *          An array of characters representing the next portion of the
 *          message.
 *      length: [in]
 *          The length of the message in message_array
 *
 *  Returns:
 *      Nothing.
 *
 *  Comments:
 *
 */
void SHA1Input(     SHA1Context         *context,
                    const unsigned char *message_array,
                    unsigned            length)
{
    if (!length)
    {
        return;
    }

    if (context->Computed || context->Corrupted)
    {
        context->Corrupted = 1;
        return;
    }

    while(length-- && !context->Corrupted)
    {
        context->Message_Block[context->Message_Block_Index++] =
                                                (*message_array & 0xFF);

        context->Length_Low += 8;
        /* Force it to 32 bits */
        context->Length_Low &= 0xFFFFFFFF;
        if (context->Length_Low == 0)
        {
            context->Length_High++;
            /* Force it to 32 bits */
            context->Length_High &= 0xFFFFFFFF;
            if (context->Length_High == 0)
            {
                /* Message is too long */
                context->Corrupted = 1;
            }
        }

        if (context->Message_Block_Index == 64)
        {
            SHA1ProcessMessageBlock(context);
        }

        message_array++;
    }
}

/*
 *  SHA1ProcessMessageBlock
 *
 *  Description:
 *      This function will process the next 512 bits of the message
 *      stored in the Message_Block array.
 *
 *  Parameters:
 *      None.
 *
 *  Returns:
 *      Nothing.
 *
 *  Comments:
 *      Many of the variable names in the SHAContext, especially the
 *      single character names, were used because those were the names
 *      used in the publication.
 *
 *
 */
void SHA1ProcessMessageBlock(SHA1Context *context)
{
    const unsigned K[] =            /* Constants defined in SHA-1   */
    {
        0x5A827999,
        0x6ED9EBA1,
        0x8F1BBCDC,
        0xCA62C1D6
    };
    int         t;                  /* Loop counter                 */
    unsigned    temp;               /* Temporary word value         */
    unsigned    W[80];              /* Word sequence                */
    unsigned    A, B, C, D, E;      /* Word buffers                 */

    /*
     *  Initialize the first 16 words in the array W
     */
    for(t = 0; t < 16; t++)
    {
        W[t] = ((unsigned) context->Message_Block[t * 4]) << 24;
        W[t] |= ((unsigned) context->Message_Block[t * 4 + 1]) << 16;
        W[t] |= ((unsigned) context->Message_Block[t * 4 + 2]) << 8;
        W[t] |= ((unsigned) context->Message_Block[t * 4 + 3]);
    }

    for(t = 16; t < 80; t++)
    {
       W[t] = SHA1CircularShift(1,W[t-3] ^ W[t-8] ^ W[t-14] ^ W[t-16]);
    }

    A = context->Message_Digest[0];
    B = context->Message_Digest[1];
    C = context->Message_Digest[2];
    D = context->Message_Digest[3];
    E = context->Message_Digest[4];

    for(t = 0; t < 20; t++)
    {
        temp =  SHA1CircularShift(5,A) +
                ((B & C) | ((~B) & D)) + E + W[t] + K[0];
        temp &= 0xFFFFFFFF;
        E = D;
        D = C;
        C = SHA1CircularShift(30,B);
        B = A;
        A = temp;
    }

    for(t = 20; t < 40; t++)
    {
        temp = SHA1CircularShift(5,A) + (B ^ C ^ D) + E + W[t] + K[1];
        temp &= 0xFFFFFFFF;
        E = D;
        D = C;
        C = SHA1CircularShift(30,B);
        B = A;
        A = temp;
    }

    for(t = 40; t < 60; t++)
    {
        temp = SHA1CircularShift(5,A) +
               ((B & C) | (B & D) | (C & D)) + E + W[t] + K[2];
        temp &= 0xFFFFFFFF;
        E = D;
        D = C;
        C = SHA1CircularShift(30,B);
        B = A;
        A = temp;
    }

    for(t = 60; t < 80; t++)
    {
        temp = SHA1CircularShift(5,A) + (B ^ C ^ D) + E + W[t] + K[3];
        temp &= 0xFFFFFFFF;
        E = D;
        D = C;
        C = SHA1CircularShift(30,B);
        B = A;
        A = temp;
    }

    context->Message_Digest[0] =
                        (context->Message_Digest[0] + A) & 0xFFFFFFFF;
    context->Message_Digest[1] =
                        (context->Message_Digest[1] + B) & 0xFFFFFFFF;
    context->Message_Digest[2] =
                        (context->Message_Digest[2] + C) & 0xFFFFFFFF;
    context->Message_Digest[3] =
                        (context->Message_Digest[3] + D) & 0xFFFFFFFF;
    context->Message_Digest[4] =
                        (context->Message_Digest[4] + E) & 0xFFFFFFFF;

    context->Message_Block_Index = 0;
}

/*
 *  SHA1PadMessage
 *
 *  Description:
 *      According to the standard, the message must be padded to an even
 *      512 bits.  The first padding bit must be a '1'.  The last 64
 *      bits represent the length of the original message.  All bits in
 *      between should be 0.  This function will pad the message
 *      according to those rules by filling the Message_Block array
 *      accordingly.  It will also call SHA1ProcessMessageBlock()
 *      appropriately.  When it returns, it can be assumed that the
 *      message digest has been computed.
 *
 *  Parameters:
 *      context: [in/out]
 *          The context to pad
 *
 *  Returns:
 *      Nothing.
 *
 *  Comments:
 *
 */
void SHA1PadMessage(SHA1Context *context)
{
    /*
     *  Check to see if the current message block is too small to hold
     *  the initial padding bits and length.  If so, we will pad the
     *  block, process it, and then continue padding into a second
     *  block.
     */
    if (context->Message_Block_Index > 55)
    {
        context->Message_Block[context->Message_Block_Index++] = 0x80;
        while(context->Message_Block_Index < 64)
        {
            context->Message_Block[context->Message_Block_Index++] = 0;
        }

        SHA1ProcessMessageBlock(context);

        while(context->Message_Block_Index < 56)
        {
            context->Message_Block[context->Message_Block_Index++] = 0;
        }
    }
    else
    {
        context->Message_Block[context->Message_Block_Index++] = 0x80;
        while(context->Message_Block_Index < 56)
        {
            context->Message_Block[context->Message_Block_Index++] = 0;
        }
    }

    /*
     *  Store the message length as the last 8 octets
     */
    context->Message_Block[56] = (context->Length_High >> 24) & 0xFF;
    context->Message_Block[57] = (context->Length_High >> 16) & 0xFF;
    context->Message_Block[58] = (context->Length_High >> 8) & 0xFF;
    context->Message_Block[59] = (context->Length_High) & 0xFF;
    context->Message_Block[60] = (context->Length_Low >> 24) & 0xFF;
    context->Message_Block[61] = (context->Length_Low >> 16) & 0xFF;
    context->Message_Block[62] = (context->Length_Low >> 8) & 0xFF;
    context->Message_Block[63] = (context->Length_Low) & 0xFF;

    SHA1ProcessMessageBlock(context);
}